+++ /dev/null
-/*
-Copyright 2018 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0257
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Yiancar-Designs
-#define PRODUCT HS60
-#define DESCRIPTION GH60 compatible, tool free RGB keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 14
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 }
-#define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 }
-#define UNUSED_PINS { B6, C6, C7, F6 }
-
-/* bootloader configuration */
-
-#define QMK_ESC_OUTPUT B5 // usually COL
-#define QMK_ESC_INPUT B2 // usually ROW
-
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* Backlight options */
-
-//This is experimental do not enable yet
-//#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
-
-#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
-#define RGB_MATRIX_SKIP_FRAMES 0
-#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215
-
-#define DRIVER_ADDR_1 0b1110100
-#define DRIVER_ADDR_2 0b1110101
-
-#define DRIVER_COUNT 2
-#define DRIVER_1_LED_TOTAL 30
-
-#ifdef HS60_ANSI
-#define DRIVER_2_LED_TOTAL 31
-#else
-#define DRIVER_2_LED_TOTAL 32
-#endif
-
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
-
-#endif
+++ /dev/null
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "hs60.h"
-#include "config.h"
-
-// Please ignore this is for upcoming features
-/*#ifdef RAW_ENABLE
-
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
- uint8_t command = data[0];
- switch ( command )
- {
- case id_protocol_version:
- {
- msg_protocol_version *msg = (msg_protocol_version*)&data[1];
- msg->version = PROTOCOL_VERSION;
- break;
- }
-#if USE_KEYMAPS_IN_EEPROM
- case id_keymap_keycode_load:
- {
- msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1];
- msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column );
- break;
- }
- case id_keymap_keycode_save:
- {
- msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1];
- keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode);
- break;
- }
- case id_keymap_default_save:
- {
- keymap_default_save();
- break;
- }
-#endif // USE_KEYMAPS_IN_EEPROM
- case id_backlight_config_set_values:
- {
- msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1];
- backlight_config_set_values(msg);
- backlight_config_save();
- break;
- }
- case id_backlight_config_set_alphas_mods:
- {
- msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1];
- backlight_config_set_alphas_mods( msg->alphas_mods );
- backlight_config_save();
- break;
- }
- case id_backlight_set_key_color:
- {
- msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1];
- backlight_set_key_color(msg->row, msg->column, msg->hsv);
- break;
- }
- case id_system_get_state:
- {
- msg_system_state *msg = (msg_system_state*)&data[1];
- msg->value = backlight_get_tick();
- break;
- }
- default:
- {
- // Unhandled message.
- data[0] = id_unhandled;
- break;
- }
- }
-
- // Return same buffer with values changed
- raw_hid_send( data, length );
-
-}
-
-#endif*/
-
-#ifdef HS60_ANSI
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, C1_1, C3_2, C4_2}, //A1
- {0, C1_2, C2_2, C4_3}, //A2
- {0, C1_3, C2_3, C3_3}, //A3
- {0, C1_4, C2_4, C3_4}, //A4
- {0, C1_5, C2_5, C3_5}, //A5
- {0, C1_6, C2_6, C3_6}, //A6
- {0, C1_7, C2_7, C3_7}, //A7
- {0, C1_8, C2_8, C3_8}, //A8
- {0, C9_1, C8_1, C7_1}, //A9
- {0, C9_2, C8_2, C7_2}, //A10
- {0, C9_3, C8_3, C7_3}, //A11
- {0, C9_4, C8_4, C7_4}, //A12
- {0, C9_5, C8_5, C7_5}, //A13
- {0, C9_6, C8_6, C7_6}, //A14
- {0, C9_7, C8_7, C6_6}, //A15
- {0, C9_8, C7_7, C6_7}, //A16
-
- {0, C1_9, C3_10, C4_10}, //B1
- {0, C1_10, C2_10, C4_11}, //B2
- {0, C1_11, C2_11, C3_11}, //B3
- {0, C1_12, C2_12, C3_12}, //B4
- {0, C1_13, C2_13, C3_13}, //B5
- {0, C1_14, C2_14, C3_14}, //B6
- {0, C1_15, C2_15, C3_15}, //B7
- {0, C1_16, C2_16, C3_16}, //B8
- {0, C9_9, C8_9, C7_9}, //B9
- {0, C9_10, C8_10, C7_10}, //B10
- {0, C9_11, C8_11, C7_11}, //B11
- {0, C9_12, C8_12, C7_12}, //B12
- {0, C9_13, C8_13, C7_13}, //B13
- {0, C9_14, C8_14, C7_14}, //B14
-
- {1, C1_1, C3_2, C4_2}, //C1
- {1, C1_2, C2_2, C4_3}, //C2
- {1, C1_3, C2_3, C3_3}, //C3
- {1, C1_4, C2_4, C3_4}, //C4
- {1, C1_5, C2_5, C3_5}, //C5
- {1, C1_6, C2_6, C3_6}, //C6
- {1, C1_7, C2_7, C3_7}, //C7
- {1, C1_8, C2_8, C3_8}, //C8
- {1, C9_1, C8_1, C7_1}, //C9
- {1, C9_2, C8_2, C7_2}, //C10
- {1, C9_3, C8_3, C7_3}, //C11
- {1, C9_4, C8_4, C7_4}, //C12
- {1, C9_5, C8_5, C7_5}, //C13
- {1, C9_6, C8_6, C7_6}, //C14
- {1, C9_7, C8_7, C6_6}, //C15
- {1, C9_8, C7_7, C6_7}, //C16
-
- {1, C1_9, C3_10, C4_10}, //D1
- //D2
- {1, C1_11, C2_11, C3_11}, //D3
- {1, C1_12, C2_12, C3_12}, //D4
- {1, C1_13, C2_13, C3_13}, //D5
- {1, C1_14, C2_14, C3_14}, //D6
- {1, C1_15, C2_15, C3_15}, //D7
- {1, C1_16, C2_16, C3_16}, //D8
- {1, C9_9, C8_9, C7_9}, //D9
- {1, C9_10, C8_10, C7_10}, //D10
- {1, C9_11, C8_11, C7_11}, //D11
- {1, C9_12, C8_12, C7_12}, //D12
- {1, C9_13, C8_13, C7_13}, //D13
- {1, C9_14, C8_14, C7_14}, //D14
- {1, C9_15, C8_15, C6_14}, //D15
- {1, C9_16, C7_15, C6_15} //D16
-};
-
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-//
-// C7, C6, C5, C4, C3, C2, C1, A7, A6, A5, A4, A3, A2, A1,
-// C8, C9, C10, C11, C12, C13, C14, A8, A9, A10, A11, A12, A13, A15,
-// D4, D5, D6, D7, D8, C16, C15, B5, B6, B7, B8, A16, ---, A14,
-// D3, ---, D1, D9, D10, D11, D12, B4, B3, B2, B1, B9, ---, B10,
-// D16, D15, D14, ---, ---, ---, D13, ---, ---, ---, B14, B13, B12, B11
-/* {row | col << 4}
- * | {x=0..224, y=0..64}
- * | | modifier
- * | | | */
- {{0|(13<<4)}, {224, 0}, 1}, //A1-A16
- {{0|(12<<4)}, {204, 0}, 0},
- {{0|(11<<4)}, {187, 0}, 0},
- {{0|(10<<4)}, {170, 0}, 0},
- {{0|(9<<4)}, {153, 0}, 0},
- {{0|(8<<4)}, {136, 0}, 0},
- {{0|(7<<4)}, {119, 0}, 0},
- {{1|(7<<4)}, {119, 16}, 0},
- {{1|(8<<4)}, {136, 16}, 0},
- {{1|(9<<4)}, {153, 16}, 0},
- {{1|(10<<4)}, {170, 16}, 0},
- {{1|(11<<4)}, {187, 16}, 0},
- {{1|(12<<4)}, {204, 16}, 0},
- {{2|(13<<4)}, {224, 32}, 1},
- {{2|(12<<4)}, {224, 16}, 0},
- {{2|(11<<4)}, {197, 32}, 0},
-
- {{3|(10<<4)}, {170, 48}, 0}, //B1-B14
- {{3|(9<<4)}, {153, 48}, 0},
- {{3|(8<<4)}, {136, 48}, 0},
- {{3|(7<<4)}, {119, 48}, 0},
- {{2|(7<<4)}, {119, 32}, 0},
- {{2|(8<<4)}, {136, 32}, 0},
- {{2|(9<<4)}, {153, 32}, 0},
- {{2|(10<<4)}, {170, 32}, 0},
- {{3|(11<<4)}, {187, 48}, 0},
- {{3|(13<<4)}, {214, 48}, 1},
- {{4|(13<<4)}, {224, 64}, 1},
- {{4|(12<<4)}, {204, 64}, 1},
- {{4|(11<<4)}, {187, 64}, 1},
- {{4|(10<<4)}, {170, 64}, 1},
-
- {{0|(6<<4)}, {102, 0}, 0}, //C1-C16
- {{0|(5<<4)}, { 85, 0}, 0},
- {{0|(4<<4)}, { 68, 0}, 0},
- {{0|(3<<4)}, { 51, 0}, 0},
- {{0|(2<<4)}, { 34, 0}, 0},
- {{0|(1<<4)}, { 17, 0}, 0},
- {{0|(0<<4)}, { 0, 0}, 1},
- {{1|(0<<4)}, { 0, 16}, 1},
- {{1|(1<<4)}, { 17, 16}, 0},
- {{1|(2<<4)}, { 34, 16}, 0},
- {{1|(3<<4)}, { 51, 16}, 0},
- {{1|(4<<4)}, { 68, 16}, 0},
- {{1|(5<<4)}, { 85, 16}, 0},
- {{1|(6<<4)}, {102, 16}, 0},
- {{2|(6<<4)}, {102, 32}, 0},
- {{2|(5<<4)}, { 85, 32}, 0},
-
- {{3|(2<<4)}, { 32, 48}, 0}, //D1-D16
- //D2
- {{3|(0<<4)}, { 10, 48}, 1},
- {{2|(0<<4)}, { 0, 32}, 1},
- {{2|(1<<4)}, { 17, 32}, 0},
- {{2|(2<<4)}, { 34, 32}, 0},
- {{2|(3<<4)}, { 51, 32}, 0},
- {{2|(4<<4)}, { 68, 32}, 0},
- {{3|(3<<4)}, { 51, 48}, 0},
- {{3|(4<<4)}, { 68, 48}, 0},
- {{3|(5<<4)}, { 85, 48}, 0},
- {{3|(6<<4)}, {102, 48}, 0},
- {{4|(3<<4)}, {102, 64}, 0},
- {{4|(2<<4)}, { 34, 68}, 1},
- {{4|(1<<4)}, { 17, 68}, 1},
- {{4|(0<<4)}, { 0, 68}, 1}
-};
-
-#else
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, C1_1, C3_2, C4_2}, //A1
- {0, C1_2, C2_2, C4_3}, //A2
- {0, C1_3, C2_3, C3_3}, //A3
- {0, C1_4, C2_4, C3_4}, //A4
- {0, C1_5, C2_5, C3_5}, //A5
- {0, C1_6, C2_6, C3_6}, //A6
- {0, C1_7, C2_7, C3_7}, //A7
- {0, C1_8, C2_8, C3_8}, //A8
- {0, C9_1, C8_1, C7_1}, //A9
- {0, C9_2, C8_2, C7_2}, //A10
- {0, C9_3, C8_3, C7_3}, //A11
- {0, C9_4, C8_4, C7_4}, //A12
- {0, C9_5, C8_5, C7_5}, //A13
- {0, C9_6, C8_6, C7_6}, //A14
- {0, C9_7, C8_7, C6_6}, //A15
- {0, C9_8, C7_7, C6_7}, //A16
-
- {0, C1_9, C3_10, C4_10}, //B1
- {0, C1_10, C2_10, C4_11}, //B2
- {0, C1_11, C2_11, C3_11}, //B3
- {0, C1_12, C2_12, C3_12}, //B4
- {0, C1_13, C2_13, C3_13}, //B5
- {0, C1_14, C2_14, C3_14}, //B6
- {0, C1_15, C2_15, C3_15}, //B7
- {0, C1_16, C2_16, C3_16}, //B8
- {0, C9_9, C8_9, C7_9}, //B9
- {0, C9_10, C8_10, C7_10}, //B10
- {0, C9_11, C8_11, C7_11}, //B11
- {0, C9_12, C8_12, C7_12}, //B12
- {0, C9_13, C8_13, C7_13}, //B13
- {0, C9_14, C8_14, C7_14}, //B14
-
- {1, C1_1, C3_2, C4_2}, //C1
- {1, C1_2, C2_2, C4_3}, //C2
- {1, C1_3, C2_3, C3_3}, //C3
- {1, C1_4, C2_4, C3_4}, //C4
- {1, C1_5, C2_5, C3_5}, //C5
- {1, C1_6, C2_6, C3_6}, //C6
- {1, C1_7, C2_7, C3_7}, //C7
- {1, C1_8, C2_8, C3_8}, //C8
- {1, C9_1, C8_1, C7_1}, //C9
- {1, C9_2, C8_2, C7_2}, //C10
- {1, C9_3, C8_3, C7_3}, //C11
- {1, C9_4, C8_4, C7_4}, //C12
- {1, C9_5, C8_5, C7_5}, //C13
- {1, C9_6, C8_6, C7_6}, //C14
- {1, C9_7, C8_7, C6_6}, //C15
- {1, C9_8, C7_7, C6_7}, //C16
-
- {1, C1_9, C3_10, C4_10}, //D1
- {1, C1_10, C2_10, C4_11}, //D2
- {1, C1_11, C2_11, C3_11}, //D3
- {1, C1_12, C2_12, C3_12}, //D4
- {1, C1_13, C2_13, C3_13}, //D5
- {1, C1_14, C2_14, C3_14}, //D6
- {1, C1_15, C2_15, C3_15}, //D7
- {1, C1_16, C2_16, C3_16}, //D8
- {1, C9_9, C8_9, C7_9}, //D9
- {1, C9_10, C8_10, C7_10}, //D10
- {1, C9_11, C8_11, C7_11}, //D11
- {1, C9_12, C8_12, C7_12}, //D12
- {1, C9_13, C8_13, C7_13}, //D13
- {1, C9_14, C8_14, C7_14}, //D14
- {1, C9_15, C8_15, C6_14}, //D15
- {1, C9_16, C7_15, C6_15} //D16
-};
-
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-//
-// C7, C6, C5, C4, C3, C2, C1, A7, A6, A5, A4, A3, A2, A1,
-// C8, C9, C10, C11, C12, C13, C14, A8, A9, A10, A11, A12, A13, ---,
-// D4, D5, D6, D7, D8, C16, C15, B5, B6, B7, B8, A16, A15, A14,
-// D3, D2, D1, D9, D10, D11, D12, B4, B3, B2, B1, B9, ---, B10,
-// D16, D15, D14, ---, ---, ---, D13, ---, ---, ---, B14, B13, B12, B11
-/* {row | col << 4}
- * | {x=0..224, y=0..64}
- * | | modifier
- * | | | */
- {{0|(13<<4)}, {224, 0}, 1}, //A1-A16
- {{0|(12<<4)}, {204, 0}, 0},
- {{0|(11<<4)}, {187, 0}, 0},
- {{0|(10<<4)}, {170, 0}, 0},
- {{0|(9<<4)}, {153, 0}, 0},
- {{0|(8<<4)}, {136, 0}, 0},
- {{0|(7<<4)}, {119, 0}, 0},
- {{1|(7<<4)}, {119, 16}, 0},
- {{1|(8<<4)}, {136, 16}, 0},
- {{1|(9<<4)}, {153, 16}, 0},
- {{1|(10<<4)}, {170, 16}, 0},
- {{1|(11<<4)}, {187, 16}, 0},
- {{1|(12<<4)}, {204, 16}, 0},
- {{2|(13<<4)}, {224, 8}, 1},
- {{2|(12<<4)}, {204, 32}, 0},
- {{2|(11<<4)}, {187, 32}, 0},
-
- {{3|(10<<4)}, {170, 48}, 0}, //B1-B14
- {{3|(9<<4)}, {153, 48}, 0},
- {{3|(8<<4)}, {136, 48}, 0},
- {{3|(7<<4)}, {119, 48}, 0},
- {{2|(7<<4)}, {119, 32}, 0},
- {{2|(8<<4)}, {136, 32}, 0},
- {{2|(9<<4)}, {153, 32}, 0},
- {{2|(10<<4)}, {170, 32}, 0},
- {{3|(11<<4)}, {187, 48}, 0},
- {{3|(13<<4)}, {214, 48}, 1},
- {{4|(13<<4)}, {224, 64}, 1},
- {{4|(12<<4)}, {204, 64}, 1},
- {{4|(11<<4)}, {187, 64}, 1},
- {{4|(10<<4)}, {170, 64}, 1},
-
- {{0|(6<<4)}, {102, 0}, 0}, //C1-C16
- {{0|(5<<4)}, { 85, 0}, 0},
- {{0|(4<<4)}, { 68, 0}, 0},
- {{0|(3<<4)}, { 51, 0}, 0},
- {{0|(2<<4)}, { 34, 0}, 0},
- {{0|(1<<4)}, { 17, 0}, 0},
- {{0|(0<<4)}, { 0, 0}, 1},
- {{1|(0<<4)}, { 0, 16}, 1},
- {{1|(1<<4)}, { 17, 16}, 0},
- {{1|(2<<4)}, { 34, 16}, 0},
- {{1|(3<<4)}, { 51, 16}, 0},
- {{1|(4<<4)}, { 68, 16}, 0},
- {{1|(5<<4)}, { 85, 16}, 0},
- {{1|(6<<4)}, {102, 16}, 0},
- {{2|(6<<4)}, {102, 32}, 0},
- {{2|(5<<4)}, { 85, 32}, 0},
-
- {{3|(2<<4)}, { 32, 48}, 0}, //D1-D16
- {{3|(1<<4)}, { 17, 48}, 0},
- {{3|(0<<4)}, { 0, 48}, 1},
- {{2|(0<<4)}, { 0, 32}, 1},
- {{2|(1<<4)}, { 17, 32}, 0},
- {{2|(2<<4)}, { 34, 32}, 0},
- {{2|(3<<4)}, { 51, 32}, 0},
- {{2|(4<<4)}, { 68, 32}, 0},
- {{3|(3<<4)}, { 51, 48}, 0},
- {{3|(4<<4)}, { 68, 48}, 0},
- {{3|(5<<4)}, { 85, 48}, 0},
- {{3|(6<<4)}, {102, 48}, 0},
- {{4|(3<<4)}, {102, 64}, 0},
- {{4|(2<<4)}, { 34, 68}, 1},
- {{4|(1<<4)}, { 17, 68}, 1},
- {{4|(0<<4)}, { 0, 68}, 1}
-};
-
-#endif
-
-void bootmagic_lite(void)
-{
- // The lite version of TMK's bootmagic made by Wilba.
- // 100% less potential for accidentally making the
- // keyboard do stupid things.
-
- // We need multiple scans because debouncing can't be turned off.
- matrix_scan();
- wait_ms(DEBOUNCING_DELAY);
- matrix_scan();
-
- // If the Esc and space bar are held down on power up,
- // reset the EEPROM valid state and jump to bootloader.
- // Assumes Esc is at [0,0] and spacebar is at [4,6].
- // This isn't very generalized, but we need something that doesn't
- // rely on user's keymaps in firmware or EEPROM.
- if ( ( matrix_get_row(0) & (1<<0) ) &&
- ( matrix_get_row(4) & (1<<6) ) )
- {
- // Set the TMK/QMK EEPROM state as invalid.
- eeconfig_disable();
- //eeprom_set_valid(false);
- // Jump to bootloader.
- bootloader_jump();
- }
-}
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- bootmagic_lite();
-
- // Please ignore this is for upcoming features
- // If the EEPROM has the magic, the data is good.
- // OK to load from EEPROM.
- /*if (eeprom_is_valid())
- {
- backlight_config_load();
-
- // TODO: do something to "turn on" keymaps in EEPROM?
- }
- else
- {
- // If the EEPROM has not been saved before, or is out of date,
- // save the default values to the EEPROM. Default values
- // come from construction of the zeal_backlight_config instance.
- backlight_config_save();
-
- // Clear the LED colors stored in EEPROM
- for ( int row=0; row < MATRIX_ROWS; row++ )
- {
- HSV hsv;
- for ( int column=0; column < MATRIX_COLS; column++ )
- {
- hsv.h = rand() & 0xFF;
- hsv.s = rand() & 0x7F;
- hsv.v = 255;
- backlight_set_key_color( row, column, hsv );
- }
- }
- #ifdef USE_KEYMAPS_IN_EEPROM
- keymap_default_save();
- #endif
- // Save the magic number last, in case saving was interrupted
- eeprom_set_valid(true);
- }*/
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- //backlight_set_indicator_state(usb_led);
-}
-
-void suspend_power_down_kb(void)
-{
- rgb_matrix_set_suspend_state(true);
-}
-
-void suspend_wakeup_init_kb(void)
-{
- rgb_matrix_set_suspend_state(false);
-}
\ No newline at end of file
+++ /dev/null
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef HS60_H
-#define HS60_H
-
-#define XXX KC_NO
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-
-#define LAYOUT_60_iso( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
- K40, K41, K42, K46, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
- { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \
-}
-
-#define LAYOUT_60_ansi( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
- K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
- K40, K41, K42, K46, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
- { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
- { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \
-}
-#endif
\ No newline at end of file
+++ /dev/null
-{
- "keyboard_name": "HS60",
- "url": "",
- "maintainer": "qmk",
- "width": 15,
- "height": 5,
- "layouts": {
- "LAYOUT_60_iso": {
- "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
- },
- "LAYOUT_60_ansi": {
- "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
- }
- }
-}
+++ /dev/null
-/*
-Copyright 2018 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/* Include overwrites for specific keymap */
-
-#define HS60_ANSI
-
-#endif
\ No newline at end of file
+++ /dev/null
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-//This is the ANSI version of the PCB
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT_60_ansi( /* Base */
- KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
-
-[1] = LAYOUT_60_ansi( /* FN */
- KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
- KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS,\
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS,\
- KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
-void matrix_init_user(void) {
- //user initialization
-}
-
-void matrix_scan_user(void) {
- //user matrix
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
\ No newline at end of file
+++ /dev/null
-The default keymap for ANSI HS60
-================================
-
-
-
-Default layer is normal ANSI and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
+++ /dev/null
-/* Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-//This is the ISO version of the PCB
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT_60_iso( /* Base */
- KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
- KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
- KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
-
-[1] = LAYOUT_60_iso( /* FN */
- KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
- KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , \
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS,\
- KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
-void matrix_init_user(void) {
- //user initialization
-}
-
-void matrix_scan_user(void) {
- //user matrix
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
\ No newline at end of file
+++ /dev/null
-The default keymap for ISO HS60
-===============================
-
-
-
-Default layer is normal ISO and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
+++ /dev/null
-HS60
-====
-
-[HS60](https://mechboards.co.uk/wp-content/uploads/2018/04/IMG_20180420_140353.jpg)
-
-This is a standard fixed layout 60% PCB. It comes in two varians, ISO and ANSI and support full per-key RGB.
-
-Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
-Hardware Supported: HS60 ISO and ANSI PCBs with Atmega 32u4
-Hardware Availability: https://mechboards.co.uk/shop/all/hs60-pcb/
-
-Due to the RGB implementation, the HS60 is currently not compatible with community layouts.
-
-Make example for this keyboard (after setting up your build environment):
-
- make hs60:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+++ /dev/null
-# MCU name
-#MCU = at90usb1286
-MCU = atmega32u4
-
-# project specific files
-#SRC =
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
-BOOTLOADER = qmk-dfu
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-RGB_MATRIX_ENABLE = yes # Use RGB matrix
-
-# Experimental features for zealcmd please do no enable
-#RAW_ENABLE = yes
-#USE_KEYMAPS_IN_EEPROM = yes
--- /dev/null
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0257
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Yiancar-Designs
+#define PRODUCT HS60
+#define DESCRIPTION GH60 compatible, tool free RGB keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 }
+#define MATRIX_COL_PINS { F1, F4, F5, E6, F0, B7, D2, D3, D5, D4, D6, D7, B4, B5 }
+#define UNUSED_PINS { B6, C6, C7, F6 }
+
+/* bootloader configuration */
+
+#define QMK_ESC_OUTPUT B5 // usually COL
+#define QMK_ESC_INPUT B2 // usually ROW
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* Backlight options */
+
+//This is experimental do not enable yet
+//#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
+
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_MATRIX_SKIP_FRAMES 0
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 215
+
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110101
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 30
+
+#ifdef HS60_ANSI
+#define DRIVER_2_LED_TOTAL 31
+#else
+#define DRIVER_2_LED_TOTAL 32
+#endif
+
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
--- /dev/null
+{
+ "keyboard_name": "HS60",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_60_iso": {
+ "layout": [{"label":"\u00ac", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ },
+ "LAYOUT_60_ansi": {
+ "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+ }
+ }
+}
--- /dev/null
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* Include overwrites for specific keymap */
+
+#define HS60_ANSI
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the ANSI version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_ansi( /* Base */
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
+
+[1] = LAYOUT_60_ansi( /* FN */
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS,\
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS,\
+ KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+void matrix_init_user(void) {
+ //user initialization
+}
+
+void matrix_scan_user(void) {
+ //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
\ No newline at end of file
--- /dev/null
+The default keymap for ANSI HS60
+================================
+
+
+
+Default layer is normal ANSI and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the ISO version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_iso( /* Base */
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
+
+[1] = LAYOUT_60_iso( /* FN */
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , \
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS,\
+ KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+void matrix_init_user(void) {
+ //user initialization
+}
+
+void matrix_scan_user(void) {
+ //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
\ No newline at end of file
--- /dev/null
+The default keymap for ISO HS60
+===============================
+
+
+
+Default layer is normal ISO and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
--- /dev/null
+HS60
+====
+
+[HS60](https://mechboards.co.uk/wp-content/uploads/2018/04/IMG_20180420_140353.jpg)
+
+This is a standard fixed layout 60% PCB. It comes in two varians, ISO and ANSI and support full per-key RGB.
+
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
+Hardware Supported: HS60 ISO and ANSI PCBs with Atmega 32u4
+Hardware Availability: https://mechboards.co.uk/shop/all/hs60-pcb/
+
+Due to the RGB implementation, the HS60 is currently not compatible with community layouts.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make hs60/v1:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- /dev/null
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# project specific files
+#SRC =
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section
+BOOTLOADER = qmk-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+RGB_MATRIX_ENABLE = yes # Use RGB matrix
+
+# Experimental features for zealcmd please do no enable
+#RAW_ENABLE = yes
+#USE_KEYMAPS_IN_EEPROM = yes
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v1.h"
+
+// Please ignore this is for upcoming features
+/*#ifdef RAW_ENABLE
+
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+ uint8_t command = data[0];
+ switch ( command )
+ {
+ case id_protocol_version:
+ {
+ msg_protocol_version *msg = (msg_protocol_version*)&data[1];
+ msg->version = PROTOCOL_VERSION;
+ break;
+ }
+#if USE_KEYMAPS_IN_EEPROM
+ case id_keymap_keycode_load:
+ {
+ msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1];
+ msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column );
+ break;
+ }
+ case id_keymap_keycode_save:
+ {
+ msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1];
+ keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode);
+ break;
+ }
+ case id_keymap_default_save:
+ {
+ keymap_default_save();
+ break;
+ }
+#endif // USE_KEYMAPS_IN_EEPROM
+ case id_backlight_config_set_values:
+ {
+ msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1];
+ backlight_config_set_values(msg);
+ backlight_config_save();
+ break;
+ }
+ case id_backlight_config_set_alphas_mods:
+ {
+ msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1];
+ backlight_config_set_alphas_mods( msg->alphas_mods );
+ backlight_config_save();
+ break;
+ }
+ case id_backlight_set_key_color:
+ {
+ msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1];
+ backlight_set_key_color(msg->row, msg->column, msg->hsv);
+ break;
+ }
+ case id_system_get_state:
+ {
+ msg_system_state *msg = (msg_system_state*)&data[1];
+ msg->value = backlight_get_tick();
+ break;
+ }
+ default:
+ {
+ // Unhandled message.
+ data[0] = id_unhandled;
+ break;
+ }
+ }
+
+ // Return same buffer with values changed
+ raw_hid_send( data, length );
+
+}
+
+#endif*/
+
+#ifdef HS60_ANSI
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C1_1, C3_2, C4_2}, //A1
+ {0, C1_2, C2_2, C4_3}, //A2
+ {0, C1_3, C2_3, C3_3}, //A3
+ {0, C1_4, C2_4, C3_4}, //A4
+ {0, C1_5, C2_5, C3_5}, //A5
+ {0, C1_6, C2_6, C3_6}, //A6
+ {0, C1_7, C2_7, C3_7}, //A7
+ {0, C1_8, C2_8, C3_8}, //A8
+ {0, C9_1, C8_1, C7_1}, //A9
+ {0, C9_2, C8_2, C7_2}, //A10
+ {0, C9_3, C8_3, C7_3}, //A11
+ {0, C9_4, C8_4, C7_4}, //A12
+ {0, C9_5, C8_5, C7_5}, //A13
+ {0, C9_6, C8_6, C7_6}, //A14
+ {0, C9_7, C8_7, C6_6}, //A15
+ {0, C9_8, C7_7, C6_7}, //A16
+
+ {0, C1_9, C3_10, C4_10}, //B1
+ {0, C1_10, C2_10, C4_11}, //B2
+ {0, C1_11, C2_11, C3_11}, //B3
+ {0, C1_12, C2_12, C3_12}, //B4
+ {0, C1_13, C2_13, C3_13}, //B5
+ {0, C1_14, C2_14, C3_14}, //B6
+ {0, C1_15, C2_15, C3_15}, //B7
+ {0, C1_16, C2_16, C3_16}, //B8
+ {0, C9_9, C8_9, C7_9}, //B9
+ {0, C9_10, C8_10, C7_10}, //B10
+ {0, C9_11, C8_11, C7_11}, //B11
+ {0, C9_12, C8_12, C7_12}, //B12
+ {0, C9_13, C8_13, C7_13}, //B13
+ {0, C9_14, C8_14, C7_14}, //B14
+
+ {1, C1_1, C3_2, C4_2}, //C1
+ {1, C1_2, C2_2, C4_3}, //C2
+ {1, C1_3, C2_3, C3_3}, //C3
+ {1, C1_4, C2_4, C3_4}, //C4
+ {1, C1_5, C2_5, C3_5}, //C5
+ {1, C1_6, C2_6, C3_6}, //C6
+ {1, C1_7, C2_7, C3_7}, //C7
+ {1, C1_8, C2_8, C3_8}, //C8
+ {1, C9_1, C8_1, C7_1}, //C9
+ {1, C9_2, C8_2, C7_2}, //C10
+ {1, C9_3, C8_3, C7_3}, //C11
+ {1, C9_4, C8_4, C7_4}, //C12
+ {1, C9_5, C8_5, C7_5}, //C13
+ {1, C9_6, C8_6, C7_6}, //C14
+ {1, C9_7, C8_7, C6_6}, //C15
+ {1, C9_8, C7_7, C6_7}, //C16
+
+ {1, C1_9, C3_10, C4_10}, //D1
+ //D2
+ {1, C1_11, C2_11, C3_11}, //D3
+ {1, C1_12, C2_12, C3_12}, //D4
+ {1, C1_13, C2_13, C3_13}, //D5
+ {1, C1_14, C2_14, C3_14}, //D6
+ {1, C1_15, C2_15, C3_15}, //D7
+ {1, C1_16, C2_16, C3_16}, //D8
+ {1, C9_9, C8_9, C7_9}, //D9
+ {1, C9_10, C8_10, C7_10}, //D10
+ {1, C9_11, C8_11, C7_11}, //D11
+ {1, C9_12, C8_12, C7_12}, //D12
+ {1, C9_13, C8_13, C7_13}, //D13
+ {1, C9_14, C8_14, C7_14}, //D14
+ {1, C9_15, C8_15, C6_14}, //D15
+ {1, C9_16, C7_15, C6_15} //D16
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+//
+// C7, C6, C5, C4, C3, C2, C1, A7, A6, A5, A4, A3, A2, A1,
+// C8, C9, C10, C11, C12, C13, C14, A8, A9, A10, A11, A12, A13, A15,
+// D4, D5, D6, D7, D8, C16, C15, B5, B6, B7, B8, A16, ---, A14,
+// D3, ---, D1, D9, D10, D11, D12, B4, B3, B2, B1, B9, ---, B10,
+// D16, D15, D14, ---, ---, ---, D13, ---, ---, ---, B14, B13, B12, B11
+/* {row | col << 4}
+ * | {x=0..224, y=0..64}
+ * | | modifier
+ * | | | */
+ {{0|(13<<4)}, {224, 0}, 1}, //A1-A16
+ {{0|(12<<4)}, {204, 0}, 0},
+ {{0|(11<<4)}, {187, 0}, 0},
+ {{0|(10<<4)}, {170, 0}, 0},
+ {{0|(9<<4)}, {153, 0}, 0},
+ {{0|(8<<4)}, {136, 0}, 0},
+ {{0|(7<<4)}, {119, 0}, 0},
+ {{1|(7<<4)}, {119, 16}, 0},
+ {{1|(8<<4)}, {136, 16}, 0},
+ {{1|(9<<4)}, {153, 16}, 0},
+ {{1|(10<<4)}, {170, 16}, 0},
+ {{1|(11<<4)}, {187, 16}, 0},
+ {{1|(12<<4)}, {204, 16}, 0},
+ {{2|(13<<4)}, {224, 32}, 1},
+ {{2|(12<<4)}, {224, 16}, 0},
+ {{2|(11<<4)}, {197, 32}, 0},
+
+ {{3|(10<<4)}, {170, 48}, 0}, //B1-B14
+ {{3|(9<<4)}, {153, 48}, 0},
+ {{3|(8<<4)}, {136, 48}, 0},
+ {{3|(7<<4)}, {119, 48}, 0},
+ {{2|(7<<4)}, {119, 32}, 0},
+ {{2|(8<<4)}, {136, 32}, 0},
+ {{2|(9<<4)}, {153, 32}, 0},
+ {{2|(10<<4)}, {170, 32}, 0},
+ {{3|(11<<4)}, {187, 48}, 0},
+ {{3|(13<<4)}, {214, 48}, 1},
+ {{4|(13<<4)}, {224, 64}, 1},
+ {{4|(12<<4)}, {204, 64}, 1},
+ {{4|(11<<4)}, {187, 64}, 1},
+ {{4|(10<<4)}, {170, 64}, 1},
+
+ {{0|(6<<4)}, {102, 0}, 0}, //C1-C16
+ {{0|(5<<4)}, { 85, 0}, 0},
+ {{0|(4<<4)}, { 68, 0}, 0},
+ {{0|(3<<4)}, { 51, 0}, 0},
+ {{0|(2<<4)}, { 34, 0}, 0},
+ {{0|(1<<4)}, { 17, 0}, 0},
+ {{0|(0<<4)}, { 0, 0}, 1},
+ {{1|(0<<4)}, { 0, 16}, 1},
+ {{1|(1<<4)}, { 17, 16}, 0},
+ {{1|(2<<4)}, { 34, 16}, 0},
+ {{1|(3<<4)}, { 51, 16}, 0},
+ {{1|(4<<4)}, { 68, 16}, 0},
+ {{1|(5<<4)}, { 85, 16}, 0},
+ {{1|(6<<4)}, {102, 16}, 0},
+ {{2|(6<<4)}, {102, 32}, 0},
+ {{2|(5<<4)}, { 85, 32}, 0},
+
+ {{3|(2<<4)}, { 32, 48}, 0}, //D1-D16
+ //D2
+ {{3|(0<<4)}, { 10, 48}, 1},
+ {{2|(0<<4)}, { 0, 32}, 1},
+ {{2|(1<<4)}, { 17, 32}, 0},
+ {{2|(2<<4)}, { 34, 32}, 0},
+ {{2|(3<<4)}, { 51, 32}, 0},
+ {{2|(4<<4)}, { 68, 32}, 0},
+ {{3|(3<<4)}, { 51, 48}, 0},
+ {{3|(4<<4)}, { 68, 48}, 0},
+ {{3|(5<<4)}, { 85, 48}, 0},
+ {{3|(6<<4)}, {102, 48}, 0},
+ {{4|(3<<4)}, {102, 64}, 0},
+ {{4|(2<<4)}, { 34, 68}, 1},
+ {{4|(1<<4)}, { 17, 68}, 1},
+ {{4|(0<<4)}, { 0, 68}, 1}
+};
+
+#else
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C1_1, C3_2, C4_2}, //A1
+ {0, C1_2, C2_2, C4_3}, //A2
+ {0, C1_3, C2_3, C3_3}, //A3
+ {0, C1_4, C2_4, C3_4}, //A4
+ {0, C1_5, C2_5, C3_5}, //A5
+ {0, C1_6, C2_6, C3_6}, //A6
+ {0, C1_7, C2_7, C3_7}, //A7
+ {0, C1_8, C2_8, C3_8}, //A8
+ {0, C9_1, C8_1, C7_1}, //A9
+ {0, C9_2, C8_2, C7_2}, //A10
+ {0, C9_3, C8_3, C7_3}, //A11
+ {0, C9_4, C8_4, C7_4}, //A12
+ {0, C9_5, C8_5, C7_5}, //A13
+ {0, C9_6, C8_6, C7_6}, //A14
+ {0, C9_7, C8_7, C6_6}, //A15
+ {0, C9_8, C7_7, C6_7}, //A16
+
+ {0, C1_9, C3_10, C4_10}, //B1
+ {0, C1_10, C2_10, C4_11}, //B2
+ {0, C1_11, C2_11, C3_11}, //B3
+ {0, C1_12, C2_12, C3_12}, //B4
+ {0, C1_13, C2_13, C3_13}, //B5
+ {0, C1_14, C2_14, C3_14}, //B6
+ {0, C1_15, C2_15, C3_15}, //B7
+ {0, C1_16, C2_16, C3_16}, //B8
+ {0, C9_9, C8_9, C7_9}, //B9
+ {0, C9_10, C8_10, C7_10}, //B10
+ {0, C9_11, C8_11, C7_11}, //B11
+ {0, C9_12, C8_12, C7_12}, //B12
+ {0, C9_13, C8_13, C7_13}, //B13
+ {0, C9_14, C8_14, C7_14}, //B14
+
+ {1, C1_1, C3_2, C4_2}, //C1
+ {1, C1_2, C2_2, C4_3}, //C2
+ {1, C1_3, C2_3, C3_3}, //C3
+ {1, C1_4, C2_4, C3_4}, //C4
+ {1, C1_5, C2_5, C3_5}, //C5
+ {1, C1_6, C2_6, C3_6}, //C6
+ {1, C1_7, C2_7, C3_7}, //C7
+ {1, C1_8, C2_8, C3_8}, //C8
+ {1, C9_1, C8_1, C7_1}, //C9
+ {1, C9_2, C8_2, C7_2}, //C10
+ {1, C9_3, C8_3, C7_3}, //C11
+ {1, C9_4, C8_4, C7_4}, //C12
+ {1, C9_5, C8_5, C7_5}, //C13
+ {1, C9_6, C8_6, C7_6}, //C14
+ {1, C9_7, C8_7, C6_6}, //C15
+ {1, C9_8, C7_7, C6_7}, //C16
+
+ {1, C1_9, C3_10, C4_10}, //D1
+ {1, C1_10, C2_10, C4_11}, //D2
+ {1, C1_11, C2_11, C3_11}, //D3
+ {1, C1_12, C2_12, C3_12}, //D4
+ {1, C1_13, C2_13, C3_13}, //D5
+ {1, C1_14, C2_14, C3_14}, //D6
+ {1, C1_15, C2_15, C3_15}, //D7
+ {1, C1_16, C2_16, C3_16}, //D8
+ {1, C9_9, C8_9, C7_9}, //D9
+ {1, C9_10, C8_10, C7_10}, //D10
+ {1, C9_11, C8_11, C7_11}, //D11
+ {1, C9_12, C8_12, C7_12}, //D12
+ {1, C9_13, C8_13, C7_13}, //D13
+ {1, C9_14, C8_14, C7_14}, //D14
+ {1, C9_15, C8_15, C6_14}, //D15
+ {1, C9_16, C7_15, C6_15} //D16
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+//
+// C7, C6, C5, C4, C3, C2, C1, A7, A6, A5, A4, A3, A2, A1,
+// C8, C9, C10, C11, C12, C13, C14, A8, A9, A10, A11, A12, A13, ---,
+// D4, D5, D6, D7, D8, C16, C15, B5, B6, B7, B8, A16, A15, A14,
+// D3, D2, D1, D9, D10, D11, D12, B4, B3, B2, B1, B9, ---, B10,
+// D16, D15, D14, ---, ---, ---, D13, ---, ---, ---, B14, B13, B12, B11
+/* {row | col << 4}
+ * | {x=0..224, y=0..64}
+ * | | modifier
+ * | | | */
+ {{0|(13<<4)}, {224, 0}, 1}, //A1-A16
+ {{0|(12<<4)}, {204, 0}, 0},
+ {{0|(11<<4)}, {187, 0}, 0},
+ {{0|(10<<4)}, {170, 0}, 0},
+ {{0|(9<<4)}, {153, 0}, 0},
+ {{0|(8<<4)}, {136, 0}, 0},
+ {{0|(7<<4)}, {119, 0}, 0},
+ {{1|(7<<4)}, {119, 16}, 0},
+ {{1|(8<<4)}, {136, 16}, 0},
+ {{1|(9<<4)}, {153, 16}, 0},
+ {{1|(10<<4)}, {170, 16}, 0},
+ {{1|(11<<4)}, {187, 16}, 0},
+ {{1|(12<<4)}, {204, 16}, 0},
+ {{2|(13<<4)}, {224, 8}, 1},
+ {{2|(12<<4)}, {204, 32}, 0},
+ {{2|(11<<4)}, {187, 32}, 0},
+
+ {{3|(10<<4)}, {170, 48}, 0}, //B1-B14
+ {{3|(9<<4)}, {153, 48}, 0},
+ {{3|(8<<4)}, {136, 48}, 0},
+ {{3|(7<<4)}, {119, 48}, 0},
+ {{2|(7<<4)}, {119, 32}, 0},
+ {{2|(8<<4)}, {136, 32}, 0},
+ {{2|(9<<4)}, {153, 32}, 0},
+ {{2|(10<<4)}, {170, 32}, 0},
+ {{3|(11<<4)}, {187, 48}, 0},
+ {{3|(13<<4)}, {214, 48}, 1},
+ {{4|(13<<4)}, {224, 64}, 1},
+ {{4|(12<<4)}, {204, 64}, 1},
+ {{4|(11<<4)}, {187, 64}, 1},
+ {{4|(10<<4)}, {170, 64}, 1},
+
+ {{0|(6<<4)}, {102, 0}, 0}, //C1-C16
+ {{0|(5<<4)}, { 85, 0}, 0},
+ {{0|(4<<4)}, { 68, 0}, 0},
+ {{0|(3<<4)}, { 51, 0}, 0},
+ {{0|(2<<4)}, { 34, 0}, 0},
+ {{0|(1<<4)}, { 17, 0}, 0},
+ {{0|(0<<4)}, { 0, 0}, 1},
+ {{1|(0<<4)}, { 0, 16}, 1},
+ {{1|(1<<4)}, { 17, 16}, 0},
+ {{1|(2<<4)}, { 34, 16}, 0},
+ {{1|(3<<4)}, { 51, 16}, 0},
+ {{1|(4<<4)}, { 68, 16}, 0},
+ {{1|(5<<4)}, { 85, 16}, 0},
+ {{1|(6<<4)}, {102, 16}, 0},
+ {{2|(6<<4)}, {102, 32}, 0},
+ {{2|(5<<4)}, { 85, 32}, 0},
+
+ {{3|(2<<4)}, { 32, 48}, 0}, //D1-D16
+ {{3|(1<<4)}, { 17, 48}, 0},
+ {{3|(0<<4)}, { 0, 48}, 1},
+ {{2|(0<<4)}, { 0, 32}, 1},
+ {{2|(1<<4)}, { 17, 32}, 0},
+ {{2|(2<<4)}, { 34, 32}, 0},
+ {{2|(3<<4)}, { 51, 32}, 0},
+ {{2|(4<<4)}, { 68, 32}, 0},
+ {{3|(3<<4)}, { 51, 48}, 0},
+ {{3|(4<<4)}, { 68, 48}, 0},
+ {{3|(5<<4)}, { 85, 48}, 0},
+ {{3|(6<<4)}, {102, 48}, 0},
+ {{4|(3<<4)}, {102, 64}, 0},
+ {{4|(2<<4)}, { 34, 68}, 1},
+ {{4|(1<<4)}, { 17, 68}, 1},
+ {{4|(0<<4)}, { 0, 68}, 1}
+};
+
+#endif
+
+void bootmagic_lite(void)
+{
+ // The lite version of TMK's bootmagic made by Wilba.
+ // 100% less potential for accidentally making the
+ // keyboard do stupid things.
+
+ // We need multiple scans because debouncing can't be turned off.
+ matrix_scan();
+ wait_ms(DEBOUNCING_DELAY);
+ matrix_scan();
+
+ // If the Esc and space bar are held down on power up,
+ // reset the EEPROM valid state and jump to bootloader.
+ // Assumes Esc is at [0,0] and spacebar is at [4,6].
+ // This isn't very generalized, but we need something that doesn't
+ // rely on user's keymaps in firmware or EEPROM.
+ if ( ( matrix_get_row(0) & (1<<0) ) &&
+ ( matrix_get_row(4) & (1<<6) ) )
+ {
+ // Set the TMK/QMK EEPROM state as invalid.
+ eeconfig_disable();
+ //eeprom_set_valid(false);
+ // Jump to bootloader.
+ bootloader_jump();
+ }
+}
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ bootmagic_lite();
+
+ // Please ignore this is for upcoming features
+ // If the EEPROM has the magic, the data is good.
+ // OK to load from EEPROM.
+ /*if (eeprom_is_valid())
+ {
+ backlight_config_load();
+
+ // TODO: do something to "turn on" keymaps in EEPROM?
+ }
+ else
+ {
+ // If the EEPROM has not been saved before, or is out of date,
+ // save the default values to the EEPROM. Default values
+ // come from construction of the zeal_backlight_config instance.
+ backlight_config_save();
+
+ // Clear the LED colors stored in EEPROM
+ for ( int row=0; row < MATRIX_ROWS; row++ )
+ {
+ HSV hsv;
+ for ( int column=0; column < MATRIX_COLS; column++ )
+ {
+ hsv.h = rand() & 0xFF;
+ hsv.s = rand() & 0x7F;
+ hsv.v = 255;
+ backlight_set_key_color( row, column, hsv );
+ }
+ }
+ #ifdef USE_KEYMAPS_IN_EEPROM
+ keymap_default_save();
+ #endif
+ // Save the magic number last, in case saving was interrupted
+ eeprom_set_valid(true);
+ }*/
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ //backlight_set_indicator_state(usb_led);
+}
+
+void suspend_power_down_kb(void)
+{
+ rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_kb(void)
+{
+ rgb_matrix_set_suspend_state(false);
+}
\ No newline at end of file
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef HS60_H
+#define HS60_H
+
+#define XXX KC_NO
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+
+#define LAYOUT_60_iso( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+ {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+ VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+ {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+ VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+ {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+ VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+ {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+ VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+ {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+ VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+ {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+ VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+ {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+ VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+ {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+ VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+ {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+ VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ * and before any other initialization.
+ */
+void __early_init(void) {
+ enter_bootloader_mode_if_requested();
+ stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+ (void)sdcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return true;
+}
+
+/**
+ * @brief MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+ (void)mmcp;
+ /* TODO: Fill the implementation.*/
+ return false;
+}
+#endif
+
+/**
+ * @brief Board-specific initialization code.
+ * @todo Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for Clueboard 60% Keyboard
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F303XC
+#define BOARD_NAME "HS60 V2.0 PCB"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK 0U
+#endif
+
+#define STM32_LSEDRV (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK 8000000U
+#endif
+
+// #define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F303xC
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_PIN0 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_PIN5 5U
+#define GPIOA_PIN6 6U
+#define GPIOA_PIN7 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_USB_DM 11U
+#define GPIOA_USB_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_PIN3 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_PIN13 13U
+#define GPIOB_PIN14 14U
+#define GPIOB_PIN15 15U
+
+#define GPIOC_PIN0 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_PIN6 6U
+#define GPIOC_PIN7 7U
+#define GPIOC_PIN8 8U
+#define GPIOC_PIN9 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_PIN14 14U
+#define GPIOC_PIN15 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_I2C2_SDA 0U
+#define GPIOF_I2C2_SCL 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+#define GPIOG_PIN0 0U
+#define GPIOG_PIN1 1U
+#define GPIOG_PIN2 2U
+#define GPIOG_PIN3 3U
+#define GPIOG_PIN4 4U
+#define GPIOG_PIN5 5U
+#define GPIOG_PIN6 6U
+#define GPIOG_PIN7 7U
+#define GPIOG_PIN8 8U
+#define GPIOG_PIN9 9U
+#define GPIOG_PIN10 10U
+#define GPIOG_PIN11 11U
+#define GPIOG_PIN12 12U
+#define GPIOG_PIN13 13U
+#define GPIOG_PIN14 14U
+#define GPIOG_PIN15 15U
+
+#define GPIOH_PIN0 0U
+#define GPIOH_PIN1 1U
+#define GPIOH_PIN2 2U
+#define GPIOH_PIN3 3U
+#define GPIOH_PIN4 4U
+#define GPIOH_PIN5 5U
+#define GPIOH_PIN6 6U
+#define GPIOH_PIN7 7U
+#define GPIOH_PIN8 8U
+#define GPIOH_PIN9 9U
+#define GPIOH_PIN10 10U
+#define GPIOH_PIN11 11U
+#define GPIOH_PIN12 12U
+#define GPIOH_PIN13 13U
+#define GPIOH_PIN14 14U
+#define GPIOH_PIN15 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
+#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
+
+#define LINE_PIN6 PAL_LINE(GPIOF, 0U)
+#define LINE_PIN7 PAL_LINE(GPIOF, 1U)
+
+#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U)
+
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0 - NC
+ * PA1 - NC
+ * PA2 - COL1
+ * PA3 - COL2
+ * PA4 - SPEAKER1
+ * PA5 - SPEAKER2
+ * PA6 - COL3
+ * PA7 - COL8
+ * PA8 - COL6
+ * PA9 - COL7
+ * PA10 - ROW5
+ * PA11 - USB_DM (alternate 14).
+ * PA12 - USB_DP (alternate 14).
+ * PA13 - SWDIO (alternate 0).
+ * PA14 - SWCLK (alternate 0).
+ * PA15 - ROW4
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \
+ PIN_MODE_ALTERNATE(GPIOA_PIN1) | \
+ PIN_MODE_INPUT(GPIOA_PIN2) | \
+ PIN_MODE_INPUT(GPIOA_PIN3) | \
+ PIN_MODE_INPUT(GPIOA_PIN4) | \
+ PIN_MODE_INPUT(GPIOA_PIN5) | \
+ PIN_MODE_INPUT(GPIOA_PIN6) | \
+ PIN_MODE_INPUT(GPIOA_PIN7) | \
+ PIN_MODE_INPUT(GPIOA_PIN8) | \
+ PIN_MODE_INPUT(GPIOA_PIN9) | \
+ PIN_MODE_INPUT(GPIOA_PIN10) | \
+ PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
+ PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOA_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOA_USB_DM) | \
+ PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
+ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
+ PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \
+ PIN_PUPDR_FLOATING(GPIOA_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
+ PIN_PUPDR_FLOATING(GPIOA_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
+ PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
+ PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \
+ PIN_ODR_HIGH(GPIOA_PIN1) | \
+ PIN_ODR_HIGH(GPIOA_PIN2) | \
+ PIN_ODR_HIGH(GPIOA_PIN3) | \
+ PIN_ODR_HIGH(GPIOA_PIN4) | \
+ PIN_ODR_HIGH(GPIOA_PIN5) | \
+ PIN_ODR_HIGH(GPIOA_PIN6) | \
+ PIN_ODR_HIGH(GPIOA_PIN7) | \
+ PIN_ODR_HIGH(GPIOA_PIN8) | \
+ PIN_ODR_HIGH(GPIOA_PIN9) | \
+ PIN_ODR_HIGH(GPIOA_PIN10) | \
+ PIN_ODR_HIGH(GPIOA_USB_DM) | \
+ PIN_ODR_HIGH(GPIOA_USB_DP) | \
+ PIN_ODR_HIGH(GPIOA_SWDIO) | \
+ PIN_ODR_HIGH(GPIOA_SWCLK) | \
+ PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN1, 1) | \
+ PIN_AFIO_AF(GPIOA_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN5, 5) | \
+ PIN_AFIO_AF(GPIOA_PIN6, 5) | \
+ PIN_AFIO_AF(GPIOA_PIN7, 5))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
+ PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN15, 0))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0 - PIN0 (input pullup).
+ * PB1 - PIN1 (input pullup).
+ * PB2 - PIN2 (input pullup).
+ * PB3 - PIN3 (alternate 0).
+ * PB4 - PIN4 (input pullup).
+ * PB5 - PIN5 (input pullup).
+ * PB6 - PIN6 LSM303DLHC_SCL (alternate 4).
+ * PB7 - PIN7 LSM303DLHC_SDA (alternate 4).
+ * PB8 - PIN8 (input pullup).
+ * PB9 - PIN9 (input pullup).
+ * PB10 - PIN10 (input pullup).
+ * PB11 - PIN11 (input pullup).
+ * PB12 - PIN12 (input pullup).
+ * PB13 - PIN13 (input pullup).
+ * PB14 - PIN14 (input pullup).
+ * PB15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_ALTERNATE(GPIOB_PIN3) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_ALTERNATE(GPIOB_PIN6) | \
+ PIN_MODE_OUTPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_PIN9) | \
+ PIN_MODE_INPUT(GPIOB_PIN10) | \
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_INPUT(GPIOB_PIN13) | \
+ PIN_MODE_INPUT(GPIOB_PIN14) | \
+ PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
+ PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_FLOATING(GPIOB_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_FLOATING(GPIOB_PIN6) | \
+ PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
+ PIN_ODR_HIGH(GPIOB_PIN1) | \
+ PIN_ODR_HIGH(GPIOB_PIN2) | \
+ PIN_ODR_HIGH(GPIOB_PIN3) | \
+ PIN_ODR_HIGH(GPIOB_PIN4) | \
+ PIN_ODR_HIGH(GPIOB_PIN5) | \
+ PIN_ODR_HIGH(GPIOB_PIN6) | \
+ PIN_ODR_LOW(GPIOB_PIN7) | \
+ PIN_ODR_HIGH(GPIOB_PIN8) | \
+ PIN_ODR_HIGH(GPIOB_PIN9) | \
+ PIN_ODR_HIGH(GPIOB_PIN10) | \
+ PIN_ODR_HIGH(GPIOB_PIN11) | \
+ PIN_ODR_HIGH(GPIOB_PIN12) | \
+ PIN_ODR_HIGH(GPIOB_PIN13) | \
+ PIN_ODR_HIGH(GPIOB_PIN14) | \
+ PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN6, 4) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN15, 0))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0 - PIN0 (input pullup).
+ * PC1 - PIN1 (input pullup).
+ * PC2 - PIN2 (input pullup).
+ * PC3 - PIN3 (input pullup).
+ * PC4 - PIN4 (input pullup).
+ * PC5 - PIN5 (input pullup).
+ * PC6 - PIN6 (input pullup).
+ * PC7 - PIN7 (input pullup).
+ * PC8 - PIN8 (input pullup).
+ * PC9 - PIN9 (input pullup).
+ * PC10 - PIN10 (input pullup).
+ * PC11 - PIN11 (input pullup).
+ * PC12 - PIN12 (input pullup).
+ * PC13 - PIN13 (input pullup).
+ * PC14 - PIN14 (input floating).
+ * PC15 - PIN15 (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
+ PIN_MODE_INPUT(GPIOC_PIN1) | \
+ PIN_MODE_INPUT(GPIOC_PIN2) | \
+ PIN_MODE_INPUT(GPIOC_PIN3) | \
+ PIN_MODE_INPUT(GPIOC_PIN4) | \
+ PIN_MODE_INPUT(GPIOC_PIN5) | \
+ PIN_MODE_INPUT(GPIOC_PIN6) | \
+ PIN_MODE_INPUT(GPIOC_PIN7) | \
+ PIN_MODE_INPUT(GPIOC_PIN8) | \
+ PIN_MODE_INPUT(GPIOC_PIN9) | \
+ PIN_MODE_INPUT(GPIOC_PIN10) | \
+ PIN_MODE_INPUT(GPIOC_PIN11) | \
+ PIN_MODE_INPUT(GPIOC_PIN12) | \
+ PIN_MODE_INPUT(GPIOC_PIN13) | \
+ PIN_MODE_INPUT(GPIOC_PIN14) | \
+ PIN_MODE_INPUT(GPIOC_PIN15))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOC_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOC_PIN14) | \
+ PIN_PUPDR_FLOATING(GPIOC_PIN15))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
+ PIN_ODR_HIGH(GPIOC_PIN1) | \
+ PIN_ODR_HIGH(GPIOC_PIN2) | \
+ PIN_ODR_HIGH(GPIOC_PIN3) | \
+ PIN_ODR_HIGH(GPIOC_PIN4) | \
+ PIN_ODR_HIGH(GPIOC_PIN5) | \
+ PIN_ODR_HIGH(GPIOC_PIN6) | \
+ PIN_ODR_HIGH(GPIOC_PIN7) | \
+ PIN_ODR_HIGH(GPIOC_PIN8) | \
+ PIN_ODR_HIGH(GPIOC_PIN9) | \
+ PIN_ODR_HIGH(GPIOC_PIN10) | \
+ PIN_ODR_HIGH(GPIOC_PIN11) | \
+ PIN_ODR_HIGH(GPIOC_PIN12) | \
+ PIN_ODR_HIGH(GPIOC_PIN13) | \
+ PIN_ODR_HIGH(GPIOC_PIN14) | \
+ PIN_ODR_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN7, 0))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN15, 0))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0 - PIN0 (input pullup).
+ * PD1 - PIN1 (input pullup).
+ * PD2 - PIN2 (input pullup).
+ * PD3 - PIN3 (input pullup).
+ * PD4 - PIN4 (input pullup).
+ * PD5 - PIN5 (input pullup).
+ * PD6 - PIN6 (input pullup).
+ * PD7 - PIN7 (input pullup).
+ * PD8 - PIN8 (input pullup).
+ * PD9 - PIN9 (input pullup).
+ * PD11 - PIN10 (input pullup).
+ * PD11 - PIN11 (input pullup).
+ * PD12 - PIN12 (input pullup).
+ * PD13 - PIN13 (input pullup).
+ * PD14 - PIN14 (input pullup).
+ * PD15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
+ PIN_MODE_INPUT(GPIOD_PIN1) | \
+ PIN_MODE_INPUT(GPIOD_PIN2) | \
+ PIN_MODE_INPUT(GPIOD_PIN3) | \
+ PIN_MODE_INPUT(GPIOD_PIN4) | \
+ PIN_MODE_INPUT(GPIOD_PIN5) | \
+ PIN_MODE_INPUT(GPIOD_PIN6) | \
+ PIN_MODE_INPUT(GPIOD_PIN7) | \
+ PIN_MODE_INPUT(GPIOD_PIN8) | \
+ PIN_MODE_INPUT(GPIOD_PIN9) | \
+ PIN_MODE_INPUT(GPIOD_PIN10) | \
+ PIN_MODE_INPUT(GPIOD_PIN11) | \
+ PIN_MODE_INPUT(GPIOD_PIN12) | \
+ PIN_MODE_INPUT(GPIOD_PIN13) | \
+ PIN_MODE_INPUT(GPIOD_PIN14) | \
+ PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
+ PIN_ODR_HIGH(GPIOD_PIN1) | \
+ PIN_ODR_HIGH(GPIOD_PIN2) | \
+ PIN_ODR_HIGH(GPIOD_PIN3) | \
+ PIN_ODR_HIGH(GPIOD_PIN4) | \
+ PIN_ODR_HIGH(GPIOD_PIN5) | \
+ PIN_ODR_HIGH(GPIOD_PIN6) | \
+ PIN_ODR_HIGH(GPIOD_PIN7) | \
+ PIN_ODR_HIGH(GPIOD_PIN8) | \
+ PIN_ODR_HIGH(GPIOD_PIN9) | \
+ PIN_ODR_HIGH(GPIOD_PIN10) | \
+ PIN_ODR_HIGH(GPIOD_PIN11) | \
+ PIN_ODR_HIGH(GPIOD_PIN12) | \
+ PIN_ODR_HIGH(GPIOD_PIN13) | \
+ PIN_ODR_HIGH(GPIOD_PIN14) | \
+ PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN7, 0))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN15, 0))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0 - PIN0 (input pullup).
+ * PE1 - PIN1 (input pullup).
+ * PE2 - PIN2 (input pullup).
+ * PE3 - PIN3 L3GD20_CS (output pushpull maximum).
+ * PE4 - PIN4 (input pullup).
+ * PE5 - PIN5 (input pullup).
+ * PE6 - PIN6 (input pullup).
+ * PE7 - PIN7 (input pullup).
+ * PE8 - PIN8 (output pushpull maximum).
+ * PE9 - PIN9 (output pushpull maximum).
+ * PE10 - PIN10 (output pushpull maximum).
+ * PE11 - PIN11 (output pushpull maximum).
+ * PE12 - PIN12 (output pushpull maximum).
+ * PE13 - PIN13 (output pushpull maximum).
+ * PE14 - PIN14 (output pushpull maximum).
+ * PE15 - PIN15 (output pushpull maximum).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
+ PIN_MODE_INPUT(GPIOE_PIN1) | \
+ PIN_MODE_INPUT(GPIOE_PIN2) |\
+ PIN_MODE_OUTPUT(GPIOE_PIN3) | \
+ PIN_MODE_INPUT(GPIOE_PIN4) |\
+ PIN_MODE_INPUT(GPIOE_PIN5) |\
+ PIN_MODE_INPUT(GPIOE_PIN6) | \
+ PIN_MODE_INPUT(GPIOE_PIN7) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN8) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN9) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN10) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN11) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN12) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN13) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN14) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\
+ PIN_OSPEED_HIGH(GPIOE_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN2) |\
+ PIN_PUPDR_FLOATING(GPIOE_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN4) |\
+ PIN_PUPDR_PULLUP(GPIOE_PIN5) |\
+ PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN14) |\
+ PIN_PUPDR_FLOATING(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
+ PIN_ODR_HIGH(GPIOE_PIN1) | \
+ PIN_ODR_HIGH(GPIOE_PIN2) | \
+ PIN_ODR_HIGH(GPIOE_PIN3) | \
+ PIN_ODR_HIGH(GPIOE_PIN4) | \
+ PIN_ODR_HIGH(GPIOE_PIN5) | \
+ PIN_ODR_HIGH(GPIOE_PIN6) | \
+ PIN_ODR_HIGH(GPIOE_PIN7) | \
+ PIN_ODR_LOW(GPIOE_PIN8) | \
+ PIN_ODR_LOW(GPIOE_PIN9) | \
+ PIN_ODR_LOW(GPIOE_PIN10) | \
+ PIN_ODR_LOW(GPIOE_PIN11) | \
+ PIN_ODR_LOW(GPIOE_PIN12) | \
+ PIN_ODR_LOW(GPIOE_PIN13) | \
+ PIN_ODR_LOW(GPIOE_PIN14) | \
+ PIN_ODR_LOW(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN2, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN4, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN5, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN7, 0))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN15, 0))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0 - I2C2_SDA (input floating).
+ * PF1 - I2C2_SCL (input floating).
+ * PF2 - PIN2 (input pullup).
+ * PF3 - PIN3 (input pullup).
+ * PF4 - PIN4 (input pullup).
+ * PF5 - PIN5 (input pullup).
+ * PF6 - PIN6 (input pullup).
+ * PF7 - PIN7 (input pullup).
+ * PF8 - PIN8 (input pullup).
+ * PF9 - PIN9 (input pullup).
+ * PF10 - PIN10 (input pullup).
+ * PF11 - PIN11 (input pullup).
+ * PF12 - PIN12 (input pullup).
+ * PF13 - PIN13 (input pullup).
+ * PF14 - PIN14 (input pullup).
+ * PF15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \
+ PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \
+ PIN_MODE_INPUT(GPIOF_PIN2) | \
+ PIN_MODE_INPUT(GPIOF_PIN3) | \
+ PIN_MODE_INPUT(GPIOF_PIN4) | \
+ PIN_MODE_INPUT(GPIOF_PIN5) | \
+ PIN_MODE_INPUT(GPIOF_PIN6) | \
+ PIN_MODE_INPUT(GPIOF_PIN7) | \
+ PIN_MODE_INPUT(GPIOF_PIN8) | \
+ PIN_MODE_INPUT(GPIOF_PIN9) | \
+ PIN_MODE_INPUT(GPIOF_PIN10) | \
+ PIN_MODE_INPUT(GPIOF_PIN11) | \
+ PIN_MODE_INPUT(GPIOF_PIN12) | \
+ PIN_MODE_INPUT(GPIOF_PIN13) | \
+ PIN_MODE_INPUT(GPIOF_PIN14) | \
+ PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \
+ PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \
+ PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \
+ PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \
+ PIN_ODR_HIGH(GPIOF_PIN2) | \
+ PIN_ODR_HIGH(GPIOF_PIN3) | \
+ PIN_ODR_HIGH(GPIOF_PIN4) | \
+ PIN_ODR_HIGH(GPIOF_PIN5) | \
+ PIN_ODR_HIGH(GPIOF_PIN6) | \
+ PIN_ODR_HIGH(GPIOF_PIN7) | \
+ PIN_ODR_HIGH(GPIOF_PIN8) | \
+ PIN_ODR_HIGH(GPIOF_PIN9) | \
+ PIN_ODR_HIGH(GPIOF_PIN10) | \
+ PIN_ODR_HIGH(GPIOF_PIN11) | \
+ PIN_ODR_HIGH(GPIOF_PIN12) | \
+ PIN_ODR_HIGH(GPIOF_PIN13) | \
+ PIN_ODR_HIGH(GPIOF_PIN14) | \
+ PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \
+ PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN7, 0))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN15, 0))
+
+/*
+ * GPIOG setup:
+ *
+ * PG0 - PIN0 (input pullup).
+ * PG1 - PIN1 (input pullup).
+ * PG2 - PIN2 (input pullup).
+ * PG3 - PIN3 (input pullup).
+ * PG4 - PIN4 (input pullup).
+ * PG5 - PIN5 (input pullup).
+ * PG6 - PIN6 (input pullup).
+ * PG7 - PIN7 (input pullup).
+ * PG8 - PIN8 (input pullup).
+ * PG9 - PIN9 (input pullup).
+ * PG10 - PIN10 (input pullup).
+ * PG11 - PIN11 (input pullup).
+ * PG12 - PIN12 (input pullup).
+ * PG13 - PIN13 (input pullup).
+ * PG14 - PIN14 (input pullup).
+ * PG15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
+ PIN_MODE_INPUT(GPIOG_PIN1) | \
+ PIN_MODE_INPUT(GPIOG_PIN2) | \
+ PIN_MODE_INPUT(GPIOG_PIN3) | \
+ PIN_MODE_INPUT(GPIOG_PIN4) | \
+ PIN_MODE_INPUT(GPIOG_PIN5) | \
+ PIN_MODE_INPUT(GPIOG_PIN6) | \
+ PIN_MODE_INPUT(GPIOG_PIN7) | \
+ PIN_MODE_INPUT(GPIOG_PIN8) | \
+ PIN_MODE_INPUT(GPIOG_PIN9) | \
+ PIN_MODE_INPUT(GPIOG_PIN10) | \
+ PIN_MODE_INPUT(GPIOG_PIN11) | \
+ PIN_MODE_INPUT(GPIOG_PIN12) | \
+ PIN_MODE_INPUT(GPIOG_PIN13) | \
+ PIN_MODE_INPUT(GPIOG_PIN14) | \
+ PIN_MODE_INPUT(GPIOG_PIN15))
+#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
+#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN15))
+#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN15))
+#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
+ PIN_ODR_HIGH(GPIOG_PIN1) | \
+ PIN_ODR_HIGH(GPIOG_PIN2) | \
+ PIN_ODR_HIGH(GPIOG_PIN3) | \
+ PIN_ODR_HIGH(GPIOG_PIN4) | \
+ PIN_ODR_HIGH(GPIOG_PIN5) | \
+ PIN_ODR_HIGH(GPIOG_PIN6) | \
+ PIN_ODR_HIGH(GPIOG_PIN7) | \
+ PIN_ODR_HIGH(GPIOG_PIN8) | \
+ PIN_ODR_HIGH(GPIOG_PIN9) | \
+ PIN_ODR_HIGH(GPIOG_PIN10) | \
+ PIN_ODR_HIGH(GPIOG_PIN11) | \
+ PIN_ODR_HIGH(GPIOG_PIN12) | \
+ PIN_ODR_HIGH(GPIOG_PIN13) | \
+ PIN_ODR_HIGH(GPIOG_PIN14) | \
+ PIN_ODR_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN7, 0))
+#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN15, 0))
+
+/*
+ * GPIOH setup:
+ *
+ * PH0 - PIN0 (input pullup).
+ * PH1 - PIN1 (input pullup).
+ * PH2 - PIN2 (input pullup).
+ * PH3 - PIN3 (input pullup).
+ * PH4 - PIN4 (input pullup).
+ * PH5 - PIN5 (input pullup).
+ * PH6 - PIN6 (input pullup).
+ * PH7 - PIN7 (input pullup).
+ * PH8 - PIN8 (input pullup).
+ * PH9 - PIN9 (input pullup).
+ * PH10 - PIN10 (input pullup).
+ * PH11 - PIN11 (input pullup).
+ * PH12 - PIN12 (input pullup).
+ * PH13 - PIN13 (input pullup).
+ * PH14 - PIN14 (input pullup).
+ * PH15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \
+ PIN_MODE_INPUT(GPIOH_PIN1) | \
+ PIN_MODE_INPUT(GPIOH_PIN2) | \
+ PIN_MODE_INPUT(GPIOH_PIN3) | \
+ PIN_MODE_INPUT(GPIOH_PIN4) | \
+ PIN_MODE_INPUT(GPIOH_PIN5) | \
+ PIN_MODE_INPUT(GPIOH_PIN6) | \
+ PIN_MODE_INPUT(GPIOH_PIN7) | \
+ PIN_MODE_INPUT(GPIOH_PIN8) | \
+ PIN_MODE_INPUT(GPIOH_PIN9) | \
+ PIN_MODE_INPUT(GPIOH_PIN10) | \
+ PIN_MODE_INPUT(GPIOH_PIN11) | \
+ PIN_MODE_INPUT(GPIOH_PIN12) | \
+ PIN_MODE_INPUT(GPIOH_PIN13) | \
+ PIN_MODE_INPUT(GPIOH_PIN14) | \
+ PIN_MODE_INPUT(GPIOH_PIN15))
+#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
+#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN15))
+#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN15))
+#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \
+ PIN_ODR_HIGH(GPIOH_PIN1) | \
+ PIN_ODR_HIGH(GPIOH_PIN2) | \
+ PIN_ODR_HIGH(GPIOH_PIN3) | \
+ PIN_ODR_HIGH(GPIOH_PIN4) | \
+ PIN_ODR_HIGH(GPIOH_PIN5) | \
+ PIN_ODR_HIGH(GPIOH_PIN6) | \
+ PIN_ODR_HIGH(GPIOH_PIN7) | \
+ PIN_ODR_HIGH(GPIOH_PIN8) | \
+ PIN_ODR_HIGH(GPIOH_PIN9) | \
+ PIN_ODR_HIGH(GPIOH_PIN10) | \
+ PIN_ODR_HIGH(GPIOH_PIN11) | \
+ PIN_ODR_HIGH(GPIOH_PIN12) | \
+ PIN_ODR_HIGH(GPIOH_PIN13) | \
+ PIN_ODR_HIGH(GPIOH_PIN14) | \
+ PIN_ODR_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN7, 0))
+#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN15, 0))
+
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+// #define usb_lld_connect_bus(usbp)
+#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
+// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+// #define usb_lld_disconnect_bus(usbp)
+#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP)
+// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
--- /dev/null
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC
--- /dev/null
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 32
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY 100000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM 0
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE 0
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY TRUE
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT TRUE
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES TRUE
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS TRUE
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS TRUE
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES TRUE
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES TRUE
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE TRUE
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP TRUE
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS TRUE
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS FALSE
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS FALSE
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS FALSE
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note It is invoked from within @p chThdInit() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
--- /dev/null
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0258
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Yiancar-Designs
+#define PRODUCT HS60 V2
+#define DESCRIPTION GH60 compatible, tool free RGB keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
+#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3 }
+// To enable debugger set A13 A14 -> A5 A6
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 0
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* Backlight options */
+
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_MATRIX_SKIP_FRAMES 3
+
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+#define DRIVER_COUNT 2
+#ifdef HS60_ANSI
+#define DRIVER_1_LED_TOTAL 61
+#else
+#define DRIVER_1_LED_TOTAL 62
+#endif
+
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file templates/halconf.h
+ * @brief HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ * various device drivers from your application. You may also use
+ * this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL TRUE
+#endif
+
+/**
+ * @brief Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC FALSE
+#endif
+
+/**
+ * @brief Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN FALSE
+#endif
+
+/**
+ * @brief Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC TRUE
+#endif
+
+/**
+ * @brief Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT FALSE
+#endif
+
+/**
+ * @brief Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT TRUE
+#endif
+
+/**
+ * @brief Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C TRUE
+#endif
+
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
+/**
+ * @brief Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU FALSE
+#endif
+
+/**
+ * @brief Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC FALSE
+#endif
+
+/**
+ * @brief Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM FALSE
+#endif
+
+/**
+ * @brief Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI FALSE
+#endif
+
+/**
+ * @brief Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC FALSE
+#endif
+
+/**
+ * @brief Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL FALSE
+#endif
+
+/**
+ * @brief Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB FALSE
+#endif
+
+/**
+ * @brief Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI FALSE
+#endif
+
+/**
+ * @brief Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART FALSE
+#endif
+
+/**
+ * @brief Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB TRUE
+#endif
+
+/**
+ * @brief Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY FALSE
+#endif
+
+/**
+ * @brief Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ * This option is recommended also if the SPI driver does not
+ * use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Number of initialization attempts before rejecting the card.
+ * @note Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY 100
+#endif
+
+/**
+ * @brief Include support for MMC cards.
+ * @note MMC support is not yet implemented so this option must be kept
+ * at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT FALSE
+#endif
+
+/**
+ * @brief Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ * routines releasing some extra CPU time for the threads with
+ * lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ * default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE 38400
+#endif
+
+/**
+ * @brief Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ * buffers depending on the requirements of your application.
+ * @note The default is 16 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE 16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting. */
+/*===========================================================================*/
+
+/**
+ * @brief Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ * the USB data endpoint maximum packet size.
+ * @note The default is 256 bytes for both the transmission and receive
+ * buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE 1
+#endif
+
+/**
+ * @brief Serial over USB number of buffers.
+ * @note The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER 2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT TRUE
+#endif
+
+/**
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT FALSE
+#endif
+
+/**
+ * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables synchronous APIs.
+ * @note Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */
--- /dev/null
+{
+ "keyboard_name": "clueboard/60",
+ "maintainer": "skullydazed",
+ "url": "",
+ "width": 15,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_60_ansi": {
+ "key_count": 61,
+ "layout": [
+ {
+ "label": "~",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 0,
+ "w": 2
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "|",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "Enter",
+ "x": 12.75,
+ "y": 2,
+ "w": 2.25
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 2.25
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 2.75
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "Alt",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Menu",
+ "x": 12.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Ctrl",
+ "x": 13.75,
+ "y": 4,
+ "w": 1.25
+ }
+ ]
+ },
+ "LAYOUT_60_iso": {
+ "key_count": 62,
+ "layout": [
+ {
+ "label": "\\u00ac",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "\"",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "\\u00a3",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 0,
+ "w": 2
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "Enter",
+ "x": 13.75,
+ "y": 1,
+ "w": 1.25,
+ "h": 2
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "@",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "~",
+ "x": 12.75,
+ "y": 2
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 1.25
+ },
+ {
+ "label": "|",
+ "x": 1.25,
+ "y": 3
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 2.75
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "AltGr",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Menu",
+ "x": 12.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Ctrl",
+ "x": 13.75,
+ "y": 4,
+ "w": 1.25
+ }
+ ]
+ },
+ "KEYMAP_AEK": {
+ "key_count": 60,
+ "layout": [
+ {
+ "label": "~",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "label": "Backspace",
+ "x": 13,
+ "y": 0,
+ "w": 2
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "|",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "Enter",
+ "x": 12.75,
+ "y": 2,
+ "w": 2.25
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 2.25
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 2.75
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "Win",
+ "x": 1.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.75,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "x": 4.25,
+ "y": 4,
+ "w": 6.5
+ },
+ {
+ "label": "AltGr",
+ "x": 10.75,
+ "y": 4,
+ "w": 1.5
+ },
+ {
+ "label": "Win",
+ "x": 12.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Ctrl",
+ "x": 13.5,
+ "y": 4,
+ "w": 1.5
+ }
+ ]
+ },
+ "KEYMAP": {
+ "key_count": 65,
+ "layout": [
+ {
+ "label": "~",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label": "Back",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "|",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "x": 12.75,
+ "y": 2
+ },
+ {
+ "label": "Enter",
+ "x": 13.75,
+ "y": 2,
+ "w": 1.25
+ },
+ {
+ "x": 0,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 1,
+ "y": 3,
+ "w": 1.25
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "Alt",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Menu",
+ "x": 12.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Ctrl",
+ "x": 13.75,
+ "y": 4,
+ "w": 1.25
+ }
+ ]
+ },
+ "LAYOUT_60_ansi_split_bs_rshift": {
+ "key_count": 63,
+ "layout": [
+ {
+ "label": "~",
+ "x": 0,
+ "y": 0
+ },
+ {
+ "label": "!",
+ "x": 1,
+ "y": 0
+ },
+ {
+ "label": "@",
+ "x": 2,
+ "y": 0
+ },
+ {
+ "label": "#",
+ "x": 3,
+ "y": 0
+ },
+ {
+ "label": "$",
+ "x": 4,
+ "y": 0
+ },
+ {
+ "label": "%",
+ "x": 5,
+ "y": 0
+ },
+ {
+ "label": "^",
+ "x": 6,
+ "y": 0
+ },
+ {
+ "label": "&",
+ "x": 7,
+ "y": 0
+ },
+ {
+ "label": "*",
+ "x": 8,
+ "y": 0
+ },
+ {
+ "label": "(",
+ "x": 9,
+ "y": 0
+ },
+ {
+ "label": ")",
+ "x": 10,
+ "y": 0
+ },
+ {
+ "label": "_",
+ "x": 11,
+ "y": 0
+ },
+ {
+ "label": "+",
+ "x": 12,
+ "y": 0
+ },
+ {
+ "x": 13,
+ "y": 0
+ },
+ {
+ "label": "Back",
+ "x": 14,
+ "y": 0
+ },
+ {
+ "label": "Tab",
+ "x": 0,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Q",
+ "x": 1.5,
+ "y": 1
+ },
+ {
+ "label": "W",
+ "x": 2.5,
+ "y": 1
+ },
+ {
+ "label": "E",
+ "x": 3.5,
+ "y": 1
+ },
+ {
+ "label": "R",
+ "x": 4.5,
+ "y": 1
+ },
+ {
+ "label": "T",
+ "x": 5.5,
+ "y": 1
+ },
+ {
+ "label": "Y",
+ "x": 6.5,
+ "y": 1
+ },
+ {
+ "label": "U",
+ "x": 7.5,
+ "y": 1
+ },
+ {
+ "label": "I",
+ "x": 8.5,
+ "y": 1
+ },
+ {
+ "label": "O",
+ "x": 9.5,
+ "y": 1
+ },
+ {
+ "label": "P",
+ "x": 10.5,
+ "y": 1
+ },
+ {
+ "label": "{",
+ "x": 11.5,
+ "y": 1
+ },
+ {
+ "label": "}",
+ "x": 12.5,
+ "y": 1
+ },
+ {
+ "label": "|",
+ "x": 13.5,
+ "y": 1,
+ "w": 1.5
+ },
+ {
+ "label": "Caps Lock",
+ "x": 0,
+ "y": 2,
+ "w": 1.75
+ },
+ {
+ "label": "A",
+ "x": 1.75,
+ "y": 2
+ },
+ {
+ "label": "S",
+ "x": 2.75,
+ "y": 2
+ },
+ {
+ "label": "D",
+ "x": 3.75,
+ "y": 2
+ },
+ {
+ "label": "F",
+ "x": 4.75,
+ "y": 2
+ },
+ {
+ "label": "G",
+ "x": 5.75,
+ "y": 2
+ },
+ {
+ "label": "H",
+ "x": 6.75,
+ "y": 2
+ },
+ {
+ "label": "J",
+ "x": 7.75,
+ "y": 2
+ },
+ {
+ "label": "K",
+ "x": 8.75,
+ "y": 2
+ },
+ {
+ "label": "L",
+ "x": 9.75,
+ "y": 2
+ },
+ {
+ "label": ":",
+ "x": 10.75,
+ "y": 2
+ },
+ {
+ "label": "\"",
+ "x": 11.75,
+ "y": 2
+ },
+ {
+ "label": "Enter",
+ "x": 12.75,
+ "y": 2,
+ "w": 2.25
+ },
+ {
+ "label": "Shift",
+ "x": 0,
+ "y": 3,
+ "w": 2.25
+ },
+ {
+ "label": "Z",
+ "x": 2.25,
+ "y": 3
+ },
+ {
+ "label": "X",
+ "x": 3.25,
+ "y": 3
+ },
+ {
+ "label": "C",
+ "x": 4.25,
+ "y": 3
+ },
+ {
+ "label": "V",
+ "x": 5.25,
+ "y": 3
+ },
+ {
+ "label": "B",
+ "x": 6.25,
+ "y": 3
+ },
+ {
+ "label": "N",
+ "x": 7.25,
+ "y": 3
+ },
+ {
+ "label": "M",
+ "x": 8.25,
+ "y": 3
+ },
+ {
+ "label": "<",
+ "x": 9.25,
+ "y": 3
+ },
+ {
+ "label": ">",
+ "x": 10.25,
+ "y": 3
+ },
+ {
+ "label": "?",
+ "x": 11.25,
+ "y": 3
+ },
+ {
+ "label": "Shift",
+ "x": 12.25,
+ "y": 3,
+ "w": 1.75
+ },
+ {
+ "x": 14,
+ "y": 3
+ },
+ {
+ "label": "Ctrl",
+ "x": 0,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 1.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Alt",
+ "x": 2.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "x": 3.75,
+ "y": 4,
+ "w": 6.25
+ },
+ {
+ "label": "Alt",
+ "x": 10,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Win",
+ "x": 11.25,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Menu",
+ "x": 12.5,
+ "y": 4,
+ "w": 1.25
+ },
+ {
+ "label": "Ctrl",
+ "x": 13.75,
+ "y": 4,
+ "w": 1.25
+ }
+ ]
+ }
+ }
+}
--- /dev/null
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* Include overwrites for specific keymap */
+
+#define HS60_ANSI
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the ANSI version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_ansi( /* Base */
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,\
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
+
+[1] = LAYOUT_60_ansi( /* FN */
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS,\
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS,\
+ KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+void matrix_init_user(void) {
+ //user initialization
+}
+
+void matrix_scan_user(void) {
+ //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
\ No newline at end of file
--- /dev/null
+The default keymap for ANSI HS60
+================================
+
+
+
+Default layer is normal ANSI and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the ISO version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_iso( /* Base */
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
+
+[1] = LAYOUT_60_iso( /* FN */
+ KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , \
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS,\
+ KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+void matrix_init_user(void) {
+ //user initialization
+}
+
+void matrix_scan_user(void) {
+ //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
\ No newline at end of file
--- /dev/null
+The default keymap for ISO HS60
+===============================
+
+
+
+Default layer is normal ISO and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* Include overwrites for specific keymap */
+
+#define HS60_HHKB
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+//This is the HHKB version of the PCB
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_hhkb( /* Base */
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ),
+
+[1] = LAYOUT_60_hhkb( /* FN */
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,\
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_UP, KC_TRNS, KC_DEL, \
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS )
+};
+
+void matrix_init_user(void) {
+ //user initialization
+}
+
+void matrix_scan_user(void) {
+ //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
\ No newline at end of file
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_USART2SW STM32_USART2SW_PCLK
+#define STM32_USART3SW STM32_USART3SW_PCLK
+#define STM32_UART4SW STM32_UART4SW_PCLK
+#define STM32_UART5SW STM32_UART5SW_PCLK
+#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE FALSE
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_USE_ADC4 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_ADC4_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM6 TRUE
+#define STM32_GPT_USE_TIM7 TRUE
+#define STM32_GPT_USE_TIM8 TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
--- /dev/null
+HS60 V2.0
+=========
+
+[HS60](https://mechboards.co.uk/wp-content/uploads/2018/04/IMG_20180420_140353.jpg)
+
+This is a standard fixed layout 60% PCB. It comes in three variants; ISO, ANSI and HHKB and support full per-key RGB.
+
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)
+Hardware Supported: HS60 ISO, ANSI and HHKB PCBs with STM32F303CC
+Hardware Availability: http://groupbuys.mechboards.co.uk/shop/hs60-hotswap-60-pcb/
+
+Due to the RGB implementation, the HS60 is currently not compatible with community layouts.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make hs60/v2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file
--- /dev/null
+# project specific files
+
+## chip/board settings
+# the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+# comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
+#SERIAL_LINK_ENABLE = yes
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v2.h"
+
+//#include "is31fl3733.h"
+
+// Please ignore this is for upcoming features
+/*#ifdef RAW_ENABLE
+
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+ uint8_t command = data[0];
+ switch ( command )
+ {
+ case id_protocol_version:
+ {
+ msg_protocol_version *msg = (msg_protocol_version*)&data[1];
+ msg->version = PROTOCOL_VERSION;
+ break;
+ }
+#if USE_KEYMAPS_IN_EEPROM
+ case id_keymap_keycode_load:
+ {
+ msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1];
+ msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column );
+ break;
+ }
+ case id_keymap_keycode_save:
+ {
+ msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1];
+ keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode);
+ break;
+ }
+ case id_keymap_default_save:
+ {
+ keymap_default_save();
+ break;
+ }
+#endif // USE_KEYMAPS_IN_EEPROM
+ case id_backlight_config_set_values:
+ {
+ msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1];
+ backlight_config_set_values(msg);
+ backlight_config_save();
+ break;
+ }
+ case id_backlight_config_set_alphas_mods:
+ {
+ msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1];
+ backlight_config_set_alphas_mods( msg->alphas_mods );
+ backlight_config_save();
+ break;
+ }
+ case id_backlight_set_key_color:
+ {
+ msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1];
+ backlight_set_key_color(msg->row, msg->column, msg->hsv);
+ break;
+ }
+ case id_system_get_state:
+ {
+ msg_system_state *msg = (msg_system_state*)&data[1];
+ msg->value = backlight_get_tick();
+ break;
+ }
+ default:
+ {
+ // Unhandled message.
+ data[0] = id_unhandled;
+ break;
+ }
+ }
+
+ // Return same buffer with values changed
+ raw_hid_send( data, length );
+
+}
+
+#endif*/
+
+#ifdef HS60_ANSI
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //MX1
+ {0, E_1, D_1, F_1}, //MX2
+ {0, H_1, G_1, I_1}, //MX3
+ {0, K_1, J_1, L_1}, //MX4
+ {0, B_2, A_2, C_2}, //MX6
+ {0, E_2, D_2, F_2}, //MX7
+ {0, H_2, G_2, I_2}, //MX8
+ {0, K_2, J_2, L_2}, //MX14
+ {0, B_3, A_3, C_3}, //MX11
+ {0, E_3, D_3, F_3}, //MX12
+ {0, H_3, G_3, I_3}, //MX13
+ {0, K_3, J_3, L_3}, //MX19
+ {0, B_4, A_4, C_4}, //MX16
+ {0, E_4, D_4, F_4}, //MX17
+ {0, H_4, G_4, I_4}, //MX18
+ {0, K_4, J_4, L_4}, //MX23
+ {0, B_5, A_5, C_5}, //MX20
+ {0, E_5, D_5, F_5}, //MX21
+ {0, H_5, G_5, I_5}, //MX22
+ {0, K_5, J_5, L_5}, //MX27
+ {0, B_6, A_6, C_6}, //MX24
+ {0, E_6, D_6, F_6}, //MX25
+ {0, H_6, G_6, I_6}, //MX26
+ {0, K_6, J_6, L_6}, //MX31
+ {0, B_7, A_7, C_7}, //MX28
+ {0, E_7, D_7, F_7}, //MX29
+ {0, H_7, G_7, I_7}, //MX30
+ {0, K_7, J_7, L_7}, //MX36
+ {0, B_8, A_8, C_8}, //MX33
+ {0, E_8, D_8, F_8}, //MX34
+ {0, H_8, G_8, I_8}, //MX35
+ {0, K_8, J_8, L_8}, //MX40
+ {0, B_9, A_9, C_9}, //MX37
+ {0, E_9, D_9, F_9}, //MX38
+ {0, H_9, G_9, I_9}, //MX39
+ {0, K_9, J_9, L_9}, //MX44
+ {0, B_10, A_10, C_10}, //MX41
+ {0, E_10, D_10, F_10}, //MX42
+ {0, H_10, G_10, I_10}, //MX43
+ {0, K_10, J_10, L_10}, //MX48
+ {0, B_11, A_11, C_11}, //MX45
+ {0, E_11, D_11, F_11}, //MX46
+ {0, H_11, G_11, I_11}, //MX47
+ {0, K_11, J_11, L_11}, //MX53
+ {0, B_12, A_12, C_12}, //MX50
+ {0, E_12, D_12, F_12}, //MX51
+ {0, H_12, G_12, I_12}, //MX52
+
+ {0, B_13, A_13, C_13}, //MX55
+ {0, E_13, D_13, F_13}, //MX56
+
+ {0, K_13, J_13, L_13}, //MX61
+ {0, B_14, A_14, C_14}, //MX59
+ {0, E_14, D_14, F_14}, //MX57
+ {0, H_14, G_14, I_14}, //MX60
+ {0, K_14, J_14, L_14}, //MX62
+ {0, B_15, A_15, C_15}, //MX5
+ {0, E_15, D_15, F_15}, //MX10
+ {0, H_15, G_15, I_15}, //MX15
+ {0, K_15, J_15, L_15}, //MX32
+
+ {0, E_16, D_16, F_16}, //MX49
+ {0, H_16, G_16, I_16}, //MX54
+ {0, K_16, J_16, L_16}, //MX58
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+//
+// MX1, MX6, MX11, MX16, MX20, MX24, MX28, MX33, MX37, MX41, MX45, MX50, MX55, MX59,
+// MX2, MX7, MX12, MX17, MX21, MX25, MX29, MX34, MX38, MX42, MX46, MX51, MX56, ---,
+// MX3, MX8, MX13, MX18, MX22, MX26, MX30, MX35, MX39, MX43, MX47, MX52, MX57, MX60,
+// MX4, ---, MX14, MX19, MX23, MX27, MX31, MX36, MX40, MX44, MX48, MX53, ---, MX61,
+// MX5, MX10, MX15, ---, ---, ---, MX32, ---, ---, ---, MX49, MX54, MX58, MX62
+/* {row | col << 4}
+ * | {x=0..224, y=0..64}
+ * | | modifier
+ * | | | */
+ {{0|(0<<4)}, { 0, 0}, 1}, //MX1
+ {{1|(0<<4)}, { 0, 16}, 1}, //MX2
+ {{2|(0<<4)}, { 0, 32}, 1}, //MX3
+ {{3|(0<<4)}, { 0, 48}, 1}, //MX4
+ {{0|(1<<4)}, { 17, 0}, 0}, //MX6
+ {{1|(1<<4)}, { 17, 16}, 0}, //MX7
+ {{2|(1<<4)}, { 17, 32}, 0}, //MX8
+ {{3|(2<<4)}, { 34, 48}, 0}, //MX14
+ {{0|(2<<4)}, { 34, 0}, 0}, //MX11
+ {{1|(2<<4)}, { 34, 16}, 0}, //MX12
+ {{2|(2<<4)}, { 34, 32}, 0}, //MX13
+ {{3|(3<<4)}, { 51, 48}, 0}, //MX19
+ {{0|(3<<4)}, { 51, 0}, 0}, //MX16
+ {{1|(3<<4)}, { 51, 16}, 0}, //MX17
+ {{2|(3<<4)}, { 51, 32}, 0}, //MX18
+ {{3|(4<<4)}, { 68, 48}, 0}, //MX23
+ {{0|(4<<4)}, { 68, 0}, 0}, //MX20
+ {{1|(4<<4)}, { 68, 16}, 0}, //MX21
+ {{2|(4<<4)}, { 68, 32}, 0}, //MX22
+ {{3|(5<<4)}, { 85, 48}, 0}, //MX27
+ {{0|(5<<4)}, { 85, 0}, 0}, //MX24
+ {{1|(5<<4)}, { 85, 16}, 0}, //MX25
+ {{2|(5<<4)}, { 85, 32}, 0}, //MX26
+ {{3|(6<<4)}, {102, 48}, 0}, //MX31
+ {{0|(6<<4)}, {102, 0}, 0}, //MX28
+ {{1|(6<<4)}, {102, 16}, 0}, //MX29
+ {{2|(6<<4)}, {102, 32}, 0}, //MX30
+ {{3|(7<<4)}, {119, 48}, 0}, //MX36
+ {{0|(7<<4)}, {119, 0}, 0}, //MX33
+ {{1|(7<<4)}, {119, 16}, 0}, //MX34
+ {{2|(7<<4)}, {119, 32}, 0}, //MX35
+ {{3|(8<<4)}, {136, 48}, 0}, //MX40
+ {{0|(8<<4)}, {136, 0}, 0}, //MX37
+ {{1|(8<<4)}, {136, 16}, 0}, //MX38
+ {{2|(8<<4)}, {136, 32}, 0}, //MX39
+ {{3|(9<<4)}, {153, 48}, 0}, //MX44
+ {{0|(9<<4)}, {153, 0}, 0}, //MX41
+ {{1|(9<<4)}, {153, 16}, 0}, //MX42
+ {{2|(9<<4)}, {153, 32}, 0}, //MX43
+ {{3|(10<<4)}, {170, 48}, 0}, //MX48
+ {{0|(10<<4)}, {170, 0}, 0}, //MX45
+ {{1|(10<<4)}, {170, 16}, 0}, //MX46
+ {{2|(10<<4)}, {170, 32}, 0}, //MX47
+ {{3|(11<<4)}, {187, 48}, 0}, //MX53
+ {{0|(11<<4)}, {187, 0}, 0}, //MX50
+ {{1|(11<<4)}, {187, 16}, 0}, //MX51
+ {{2|(11<<4)}, {187, 32}, 0}, //MX52
+
+ {{0|(12<<4)}, {204, 0}, 0}, //MX55
+ {{1|(12<<4)}, {204, 16}, 0}, //MX56
+
+ {{3|(13<<4)}, {221, 48}, 1}, //MX61
+ {{0|(13<<4)}, {221, 0}, 1}, //MX59
+ {{2|(12<<4)}, {221, 16}, 0}, //MX57
+ {{2|(13<<4)}, {221, 32}, 1}, //MX60
+ {{4|(13<<4)}, {221, 64}, 1}, //MX62
+ {{4|(0<<4)}, { 0, 64}, 1}, //MX5
+ {{4|(1<<4)}, { 17, 64}, 1}, //MX10
+ {{4|(2<<4)}, { 34, 64}, 1}, //MX15
+ {{4|(5<<4)}, {102, 64}, 0}, //MX32
+
+ {{4|(10<<4)}, {170, 64}, 1}, //MX49
+ {{4|(11<<4)}, {187, 64}, 1}, //MX54
+ {{4|(12<<4)}, {204, 64}, 1} //MX58
+};
+
+#elif defined(HS60_HHKB)
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //MX1
+ {0, E_1, D_1, F_1}, //MX2
+ {0, H_1, G_1, I_1}, //MX3
+ {0, K_1, J_1, L_1}, //MX4
+ {0, B_2, A_2, C_2}, //MX6
+ {0, E_2, D_2, F_2}, //MX7
+ {0, H_2, G_2, I_2}, //MX8
+ {0, K_2, J_2, L_2}, //MX14
+ {0, B_3, A_3, C_3}, //MX11
+ {0, E_3, D_3, F_3}, //MX12
+ {0, H_3, G_3, I_3}, //MX13
+ {0, K_3, J_3, L_3}, //MX19
+ {0, B_4, A_4, C_4}, //MX16
+ {0, E_4, D_4, F_4}, //MX17
+ {0, H_4, G_4, I_4}, //MX18
+ {0, K_4, J_4, L_4}, //MX23
+ {0, B_5, A_5, C_5}, //MX20
+ {0, E_5, D_5, F_5}, //MX21
+ {0, H_5, G_5, I_5}, //MX22
+ {0, K_5, J_5, L_5}, //MX27
+ {0, B_6, A_6, C_6}, //MX24
+ {0, E_6, D_6, F_6}, //MX25
+ {0, H_6, G_6, I_6}, //MX26
+ {0, K_6, J_6, L_6}, //MX31
+ {0, B_7, A_7, C_7}, //MX28
+ {0, E_7, D_7, F_7}, //MX29
+ {0, H_7, G_7, I_7}, //MX30
+ {0, K_7, J_7, L_7}, //MX36
+ {0, B_8, A_8, C_8}, //MX33
+ {0, E_8, D_8, F_8}, //MX34
+ {0, H_8, G_8, I_8}, //MX35
+ {0, K_8, J_8, L_8}, //MX40
+ {0, B_9, A_9, C_9}, //MX37
+ {0, E_9, D_9, F_9}, //MX38
+ {0, H_9, G_9, I_9}, //MX39
+ {0, K_9, J_9, L_9}, //MX44
+ {0, B_10, A_10, C_10}, //MX41
+ {0, E_10, D_10, F_10}, //MX42
+ {0, H_10, G_10, I_10}, //MX43
+ {0, K_10, J_10, L_10}, //MX48
+ {0, B_11, A_11, C_11}, //MX45
+ {0, E_11, D_11, F_11}, //MX46
+ {0, H_11, G_11, I_11}, //MX47
+ {0, K_11, J_11, L_11}, //MX53
+ {0, B_12, A_12, C_12}, //MX50
+ {0, E_12, D_12, F_12}, //MX51
+ {0, H_12, G_12, I_12}, //MX52
+ {0, K_12, J_12, L_12}, //MX64
+ {0, B_13, A_13, C_13}, //MX55
+ {0, E_13, D_13, F_13}, //MX56
+ {0, H_13, G_13, I_13}, //MX63
+ {0, K_13, J_13, L_13}, //MX61
+ {0, B_14, A_14, C_14}, //MX59
+ {0, E_14, D_14, F_14}, //MX57
+ {0, H_14, G_14, I_14}, //MX60
+ {0, K_14, J_14, L_14}, //MX62
+ {0, B_15, A_15, C_15}, //MX5
+ {0, E_15, D_15, F_15}, //MX10
+ {0, H_15, G_15, I_15}, //MX15
+ {0, K_15, J_15, L_15}, //MX32
+
+
+ {0, H_16, G_16, I_16}, //MX54
+ {0, K_16, J_16, L_16}, //MX58
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+//
+// MX1, MX6, MX11, MX16, MX20, MX24, MX28, MX33, MX37, MX41, MX45, MX50, MX55, MX59,
+// MX2, MX7, MX12, MX17, MX21, MX25, MX29, MX34, MX38, MX42, MX46, MX51, MX56, MX64,
+// MX3, MX8, MX13, MX18, MX22, MX26, MX30, MX35, MX39, MX43, MX47, MX52, MX57, MX60,
+// MX4, ----, MX14, MX19, MX23, MX27, MX31, MX36, MX40, MX44, MX48, MX53, MX63, MX61,
+// MX5, MX10, MX15, ----, ----, ----, MX32, ----, ---, ----, ----, MX54, MX58, MX62
+/* {row | col << 4}
+ * | {x=0..224, y=0..64}
+ * | | modifier
+ * | | | */
+ {{0|(0<<4)}, { 0, 0}, 1}, //MX1
+ {{1|(0<<4)}, { 0, 16}, 1}, //MX2
+ {{2|(0<<4)}, { 0, 32}, 1}, //MX3
+ {{3|(0<<4)}, { 0, 48}, 1}, //MX4
+ {{0|(1<<4)}, { 17, 0}, 0}, //MX6
+ {{1|(1<<4)}, { 17, 16}, 0}, //MX7
+ {{2|(1<<4)}, { 17, 32}, 0}, //MX8
+ {{3|(2<<4)}, { 34, 48}, 0}, //MX14
+ {{0|(2<<4)}, { 34, 0}, 0}, //MX11
+ {{1|(2<<4)}, { 34, 16}, 0}, //MX12
+ {{2|(2<<4)}, { 34, 32}, 0}, //MX13
+ {{3|(3<<4)}, { 51, 48}, 0}, //MX19
+ {{0|(3<<4)}, { 51, 0}, 0}, //MX16
+ {{1|(3<<4)}, { 51, 16}, 0}, //MX17
+ {{2|(3<<4)}, { 51, 32}, 0}, //MX18
+ {{3|(4<<4)}, { 68, 48}, 0}, //MX23
+ {{0|(4<<4)}, { 68, 0}, 0}, //MX20
+ {{1|(4<<4)}, { 68, 16}, 0}, //MX21
+ {{2|(4<<4)}, { 68, 32}, 0}, //MX22
+ {{3|(5<<4)}, { 85, 48}, 0}, //MX27
+ {{0|(5<<4)}, { 85, 0}, 0}, //MX24
+ {{1|(5<<4)}, { 85, 16}, 0}, //MX25
+ {{2|(5<<4)}, { 85, 32}, 0}, //MX26
+ {{3|(6<<4)}, {102, 48}, 0}, //MX31
+ {{0|(6<<4)}, {102, 0}, 0}, //MX28
+ {{1|(6<<4)}, {102, 16}, 0}, //MX29
+ {{2|(6<<4)}, {102, 32}, 0}, //MX30
+ {{3|(7<<4)}, {119, 48}, 0}, //MX36
+ {{0|(7<<4)}, {119, 0}, 0}, //MX33
+ {{1|(7<<4)}, {119, 16}, 0}, //MX34
+ {{2|(7<<4)}, {119, 32}, 0}, //MX35
+ {{3|(8<<4)}, {136, 48}, 0}, //MX40
+ {{0|(8<<4)}, {136, 0}, 0}, //MX37
+ {{1|(8<<4)}, {136, 16}, 0}, //MX38
+ {{2|(8<<4)}, {136, 32}, 0}, //MX39
+ {{3|(9<<4)}, {153, 48}, 0}, //MX44
+ {{0|(9<<4)}, {153, 0}, 0}, //MX41
+ {{1|(9<<4)}, {153, 16}, 0}, //MX42
+ {{2|(9<<4)}, {153, 32}, 0}, //MX43
+ {{3|(10<<4)}, {170, 48}, 0}, //MX48
+ {{0|(10<<4)}, {170, 0}, 0}, //MX45
+ {{1|(10<<4)}, {170, 16}, 0}, //MX46
+ {{2|(10<<4)}, {170, 32}, 0}, //MX47
+ {{3|(11<<4)}, {187, 48}, 0}, //MX53
+ {{0|(11<<4)}, {187, 0}, 0}, //MX50
+ {{1|(11<<4)}, {187, 16}, 0}, //MX51
+ {{2|(11<<4)}, {187, 32}, 0}, //MX52
+ {{1|(13<<4)}, {221, 0}, 1}, //MX64
+ {{0|(12<<4)}, {204, 0}, 0}, //MX55
+ {{1|(12<<4)}, {204, 16}, 0}, //MX56
+ {{3|(12<<4)}, {204, 48}, 0}, //MX63
+ {{3|(13<<4)}, {212, 48}, 1}, //MX61
+ {{0|(13<<4)}, {221, 0}, 0}, //MX59
+ {{2|(12<<4)}, {221, 16}, 0}, //MX57
+ {{2|(13<<4)}, {221, 32}, 1}, //MX60
+ {{4|(13<<4)}, {221, 64}, 1}, //MX62
+ {{4|(0<<4)}, { 0, 64}, 1}, //MX5
+ {{4|(1<<4)}, { 17, 64}, 1}, //MX10
+ {{4|(2<<4)}, { 34, 64}, 1}, //MX15
+ {{4|(5<<4)}, {102, 64}, 0}, //MX32
+
+
+ {{4|(11<<4)}, {187, 64}, 1}, //MX54
+ {{4|(12<<4)}, {204, 64}, 1} //MX58
+};
+
+#else //ISO layout
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //MX1
+ {0, E_1, D_1, F_1}, //MX2
+ {0, H_1, G_1, I_1}, //MX3
+ {0, K_1, J_1, L_1}, //MX4
+ {0, B_2, A_2, C_2}, //MX6
+ {0, E_2, D_2, F_2}, //MX7
+ {0, H_2, G_2, I_2}, //MX8
+ {0, K_2, J_2, L_2}, //MX14
+ {0, B_3, A_3, C_3}, //MX11
+ {0, E_3, D_3, F_3}, //MX12
+ {0, H_3, G_3, I_3}, //MX13
+ {0, K_3, J_3, L_3}, //MX19
+ {0, B_4, A_4, C_4}, //MX16
+ {0, E_4, D_4, F_4}, //MX17
+ {0, H_4, G_4, I_4}, //MX18
+ {0, K_4, J_4, L_4}, //MX23
+ {0, B_5, A_5, C_5}, //MX20
+ {0, E_5, D_5, F_5}, //MX21
+ {0, H_5, G_5, I_5}, //MX22
+ {0, K_5, J_5, L_5}, //MX27
+ {0, B_6, A_6, C_6}, //MX24
+ {0, E_6, D_6, F_6}, //MX25
+ {0, H_6, G_6, I_6}, //MX26
+ {0, K_6, J_6, L_6}, //MX31
+ {0, B_7, A_7, C_7}, //MX28
+ {0, E_7, D_7, F_7}, //MX29
+ {0, H_7, G_7, I_7}, //MX30
+ {0, K_7, J_7, L_7}, //MX36
+ {0, B_8, A_8, C_8}, //MX33
+ {0, E_8, D_8, F_8}, //MX34
+ {0, H_8, G_8, I_8}, //MX35
+ {0, K_8, J_8, L_8}, //MX40
+ {0, B_9, A_9, C_9}, //MX37
+ {0, E_9, D_9, F_9}, //MX38
+ {0, H_9, G_9, I_9}, //MX39
+ {0, K_9, J_9, L_9}, //MX44
+ {0, B_10, A_10, C_10}, //MX41
+ {0, E_10, D_10, F_10}, //MX42
+ {0, H_10, G_10, I_10}, //MX43
+ {0, K_10, J_10, L_10}, //MX48
+ {0, B_11, A_11, C_11}, //MX45
+ {0, E_11, D_11, F_11}, //MX46
+ {0, H_11, G_11, I_11}, //MX47
+ {0, K_11, J_11, L_11}, //MX53
+ {0, B_12, A_12, C_12}, //MX50
+ {0, E_12, D_12, F_12}, //MX51
+ {0, H_12, G_12, I_12}, //MX52
+ {0, K_12, J_12, L_12}, //MX9
+ {0, B_13, A_13, C_13}, //MX55
+ {0, E_13, D_13, F_13}, //MX56
+
+ {0, K_13, J_13, L_13}, //MX61
+ {0, B_14, A_14, C_14}, //MX59
+ {0, E_14, D_14, F_14}, //MX57
+ {0, H_14, G_14, I_14}, //MX60
+ {0, K_14, J_14, L_14}, //MX62
+ {0, B_15, A_15, C_15}, //MX5
+ {0, E_15, D_15, F_15}, //MX10
+ {0, H_15, G_15, I_15}, //MX15
+ {0, K_15, J_15, L_15}, //MX32
+
+ {0, E_16, D_16, F_16}, //MX49
+ {0, H_16, G_16, I_16}, //MX54
+ {0, K_16, J_16, L_16}, //MX58
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+//
+// MX1, MX6, MX11, MX16, MX20, MX24, MX28, MX33, MX37, MX41, MX45, MX50, MX55, MX59,
+// MX2, MX7, MX12, MX17, MX21, MX25, MX29, MX34, MX38, MX42, MX46, MX51, MX56, ---,
+// MX3, MX8, MX13, MX18, MX22, MX26, MX30, MX35, MX39, MX43, MX47, MX52, MX57, MX60,
+// MX4, ---, MX14, MX19, MX23, MX27, MX31, MX36, MX40, MX44, MX48, MX53, ---, MX61,
+// MX5, MX10, MX15, ---, ---, ---, MX32, ---, ---, ---, MX49, MX54, MX58, MX62
+/* {row | col << 4}
+ * | {x=0..224, y=0..64}
+ * | | modifier
+ * | | | */
+ {{0|(0<<4)}, { 0, 0}, 1}, //MX1
+ {{1|(0<<4)}, { 0, 16}, 1}, //MX2
+ {{2|(0<<4)}, { 0, 32}, 1}, //MX3
+ {{3|(0<<4)}, { 0, 48}, 1}, //MX4
+ {{0|(1<<4)}, { 17, 0}, 0}, //MX6
+ {{1|(1<<4)}, { 17, 16}, 0}, //MX7
+ {{2|(1<<4)}, { 17, 32}, 0}, //MX8
+ {{3|(2<<4)}, { 34, 48}, 0}, //MX14
+ {{0|(2<<4)}, { 34, 0}, 0}, //MX11
+ {{1|(2<<4)}, { 34, 16}, 0}, //MX12
+ {{2|(2<<4)}, { 34, 32}, 0}, //MX13
+ {{3|(3<<4)}, { 51, 48}, 0}, //MX19
+ {{0|(3<<4)}, { 51, 0}, 0}, //MX16
+ {{1|(3<<4)}, { 51, 16}, 0}, //MX17
+ {{2|(3<<4)}, { 51, 32}, 0}, //MX18
+ {{3|(4<<4)}, { 68, 48}, 0}, //MX23
+ {{0|(4<<4)}, { 68, 0}, 0}, //MX20
+ {{1|(4<<4)}, { 68, 16}, 0}, //MX21
+ {{2|(4<<4)}, { 68, 32}, 0}, //MX22
+ {{3|(5<<4)}, { 85, 48}, 0}, //MX27
+ {{0|(5<<4)}, { 85, 0}, 0}, //MX24
+ {{1|(5<<4)}, { 85, 16}, 0}, //MX25
+ {{2|(5<<4)}, { 85, 32}, 0}, //MX26
+ {{3|(6<<4)}, {102, 48}, 0}, //MX31
+ {{0|(6<<4)}, {102, 0}, 0}, //MX28
+ {{1|(6<<4)}, {102, 16}, 0}, //MX29
+ {{2|(6<<4)}, {102, 32}, 0}, //MX30
+ {{3|(7<<4)}, {119, 48}, 0}, //MX36
+ {{0|(7<<4)}, {119, 0}, 0}, //MX33
+ {{1|(7<<4)}, {119, 16}, 0}, //MX34
+ {{2|(7<<4)}, {119, 32}, 0}, //MX35
+ {{3|(8<<4)}, {136, 48}, 0}, //MX40
+ {{0|(8<<4)}, {136, 0}, 0}, //MX37
+ {{1|(8<<4)}, {136, 16}, 0}, //MX38
+ {{2|(8<<4)}, {136, 32}, 0}, //MX39
+ {{3|(9<<4)}, {153, 48}, 0}, //MX44
+ {{0|(9<<4)}, {153, 0}, 0}, //MX41
+ {{1|(9<<4)}, {153, 16}, 0}, //MX42
+ {{2|(9<<4)}, {153, 32}, 0}, //MX43
+ {{3|(10<<4)}, {170, 48}, 0}, //MX48
+ {{0|(10<<4)}, {170, 0}, 0}, //MX45
+ {{1|(10<<4)}, {170, 16}, 0}, //MX46
+ {{2|(10<<4)}, {170, 32}, 0}, //MX47
+ {{3|(11<<4)}, {187, 48}, 0}, //MX53
+ {{0|(11<<4)}, {187, 0}, 0}, //MX50
+ {{1|(11<<4)}, {187, 16}, 0}, //MX51
+ {{2|(11<<4)}, {187, 32}, 0}, //MX52
+ {{3|(2<<4)}, { 17, 32}, 1}, //MX9
+ {{0|(12<<4)}, {204, 0}, 0}, //MX55
+ {{1|(12<<4)}, {204, 16}, 0}, //MX56
+
+ {{3|(13<<4)}, {221, 48}, 1}, //MX61
+ {{0|(13<<4)}, {221, 0}, 1}, //MX59
+ {{2|(12<<4)}, {204, 32}, 0}, //MX57
+ {{2|(13<<4)}, {221, 24}, 1}, //MX60
+ {{4|(13<<4)}, {221, 64}, 1}, //MX62
+ {{4|(0<<4)}, { 0, 64}, 1}, //MX5
+ {{4|(1<<4)}, { 17, 64}, 1}, //MX10
+ {{4|(2<<4)}, { 34, 64}, 1}, //MX15
+ {{4|(5<<4)}, {102, 64}, 0}, //MX32
+
+ {{4|(10<<4)}, {170, 64}, 1}, //MX49
+ {{4|(11<<4)}, {187, 64}, 1}, //MX54
+ {{4|(12<<4)}, {204, 64}, 1} //MX58
+};
+
+#endif
+
+void bootmagic_lite(void)
+{
+ // The lite version of TMK's bootmagic made by Wilba.
+ // 100% less potential for accidentally making the
+ // keyboard do stupid things.
+
+ // We need multiple scans because debouncing can't be turned off.
+ matrix_scan();
+ wait_ms(10);
+ matrix_scan();
+
+ // If the Esc and space bar are held down on power up,
+ // reset the EEPROM valid state and jump to bootloader.
+ // Assumes Esc is at [0,0] and spacebar is at [4,6].
+ // This isn't very generalized, but we need something that doesn't
+ // rely on user's keymaps in firmware or EEPROM.
+ if ( ( matrix_get_row(0) & (1<<0) ) &&
+ ( matrix_get_row(4) & (1<<6) ) )
+ {
+ // Set the TMK/QMK EEPROM state as invalid.
+ eeconfig_disable();
+ //eeprom_set_valid(false);
+ // Jump to bootloader.
+ bootloader_jump();
+ }
+}
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ bootmagic_lite();
+
+ // Please ignore this is for upcoming features
+ // If the EEPROM has the magic, the data is good.
+ // OK to load from EEPROM.
+ /*if (eeprom_is_valid())
+ {
+ backlight_config_load();
+
+ // TODO: do something to "turn on" keymaps in EEPROM?
+ }
+ else
+ {
+ // If the EEPROM has not been saved before, or is out of date,
+ // save the default values to the EEPROM. Default values
+ // come from construction of the zeal_backlight_config instance.
+ backlight_config_save();
+
+ // Clear the LED colors stored in EEPROM
+ for ( int row=0; row < MATRIX_ROWS; row++ )
+ {
+ HSV hsv;
+ for ( int column=0; column < MATRIX_COLS; column++ )
+ {
+ hsv.h = rand() & 0xFF;
+ hsv.s = rand() & 0x7F;
+ hsv.v = 255;
+ backlight_set_key_color( row, column, hsv );
+ }
+ }
+ #ifdef USE_KEYMAPS_IN_EEPROM
+ keymap_default_save();
+ #endif
+ // Save the magic number last, in case saving was interrupted
+ eeprom_set_valid(true);
+ }*/
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ //backlight_set_indicator_state(usb_led);
+}
\ No newline at end of file
--- /dev/null
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef HS60_H
+#define HS60_H
+
+#define XXX KC_NO
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+
+#define LAYOUT_60_iso( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_ansi( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D } \
+}
+
+#define LAYOUT_60_hhkb( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
+ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
+ K40, K41, K42, K46, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+ { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+ { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, XXX, K4B, K4C, K4D } \
+}
+
+#endif
\ No newline at end of file
projects / qmk_firmware.git / commitdiff