* Add a new keyboard Halberd.
* Update default keymap and add new keymap.
* Use pragma once.
* Comment out IS_COMMAND macro.
* Remove unnecessary backslashes.
* Remove dead code.
* Change layer defines to enum.
* Remove DISABLE_JTAG definition.
* Change BOOTMAGIC_ENABLE to "lite".
* Remove unnecessary line.
Co-Authored-By: fauxpark <fauxpark@gmail.com>
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Kagizaraya
+#define PRODUCT Halberd
+#define DESCRIPTION 40% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D6, D4, D5, E6 }
+#define MATRIX_COL_PINS { D7, B4, C7, C6, B6, B5, F7, F6, F5, F4, F1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 40
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/*
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+*/
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
+
+#define TAPPING_TERM 100
+
+
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "halberd.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, \
+ K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, \
+ K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, K32, \
+ K33, K34, K35, K36, K37, K38, K39 \
+) \
+{ \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10 }, \
+ { K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21 }, \
+ { K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, K32 }, \
+ { KC_NO, KC_NO, K33, K34, K35, K36, K37, K38, K39, KC_NO, KC_NO } \
+}
+
--- /dev/null
+{
+ "keyboard_name": "Halberd",
+ "url": "",
+ "maintainer": "ka2hiro",
+ "width": 11,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"!", "x":0, "y":0}, {"label":"@", "x":1, "y":0}, {"label":"#", "x":2, "y":0}, {"label":"$", "x":3, "y":0}, {"label":"%", "x":4, "y":0}, {"label":"Tab", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"Tab", "x":0, "y":1}, {"label":"_", "x":1, "y":1}, {"label":"+", "x":2, "y":1}, {"label":"|", "x":3, "y":1}, {"label":"~", "x":4, "y":1}, {"label":"BkSp", "x":5, "y":1}, {"label":":", "x":6, "y":1}, {"label":"\"", "x":7, "y":1}, {"label":">", "x":8, "y":1}, {"label":"{", "x":9, "y":1}, {"label":"}", "x":10, "y":1}, {"label":"Caps", "x":0, "y":2}, {"label":"-", "x":1, "y":2}, {"label":"=", "x":2, "y":2}, {"label":"\\", "x":3, "y":2}, {"label":"`", "x":4, "y":2}, {"label":"Enter", "x":5, "y":2}, {"label":";", "x":6, "y":2}, {"label":"'", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":"[", "x":9, "y":2}, {"label":"]", "x":10, "y":2}, {"label":"GUI", "x":2, "y":3}, {"label":"Lower", "x":3, "y":3}, {"label":"Esc", "x":4, "y":3}, {"x":5, "y":3}, {"label":"Shift", "x":6, "y":3}, {"label":"Raise", "x":7, "y":3}, {"label":"Alt", "x":8, "y":3}]
+ }
+ }
+}
+
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum layer_names {
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ *
+ * ,----------------------------------------------------------------------------.
+ * | Q | W | E | R | T | Tab | Y | U | I | O | P |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | A | S | D | F | G | BkSp | H | J | K | L | ; |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Z | X | C | V | B | Enter| N | M | , | . | / |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ * | GUI | LOWER|Ctrl/Esc|Space|Shift| RAISE| Alt |
+ * `------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB, KC_Y, KC_U, KC_I, KC_O, KC_P,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_BSPC, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
+ KC_LGUI, LOWER, MT(MOD_LCTL, KC_ESC), KC_SPC, KC_LSFT, RAISE, KC_LALT
+),
+
+/* Raise
+ *
+ * ,----------------------------------------------------------------------------.
+ * | ! | @ | # | $ | % | | ^ | & | * | ( | ) |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Tab | _ | + | | | ~ | | : | " | > | { | } |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Caps| - | = | \ | ` | | ; | ' | < | [ | ] |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ * | | LOWER| | | Esc | RAISE| |
+ * `------------------------------------------------'
+ */
+[_RAISE] = LAYOUT(
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+ KC_TAB, KC_UNDS, KC_PLUS, KC_PIPE, KC_TILD, _______, KC_COLN, KC_DQUO, KC_GT, KC_LCBR, KC_RCBR,
+ KC_CAPS, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, _______, KC_SCLN, KC_QUOT, KC_LT, KC_LBRC, KC_RBRC,
+ _______, _______, _______, _______, _______, _______, _______
+),
+
+/* Lower
+ *
+ * ,----------------------------------------------------------------------------.
+ * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Tab | | | |Enter | | Left | Down | Up | Right| Enter|
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Ctrl| | GUI | Alt | Del | | BkSp | PgUp | PgDn | | |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ * | | LOWER| | | | RAISE| |
+ * `------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+ KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0,
+ KC_TAB, _______, _______, _______, KC_ENT, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_ENT,
+ KC_LCTL, _______, KC_LGUI, KC_LALT, KC_DEL, _______, KC_BSPC, KC_PGUP, KC_PGDN, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+),
+
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------------------------------------------------.
+ * | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | F11 | F12 | |RGBSAI|RGBSAD| |RGBVAI|RGBVAD| | | |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD| | Prev | Next | Vol- | Vol+ | Play |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ * | | LOWER| | | | RAISE| |
+ * `------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT(
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+ KC_F11, KC_F12, RGB_RMOD, RGB_SAI, RGB_SAD, _______, RGB_VAI, RGB_VAD, _______, _______, _______,
+ RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, _______, KC_MPRV, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY,
+ _______, _______, _______, _______, _______, _______, _______
+)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ // persistant_default_layer_set(1UL<<_QWERTY);
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ return false;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for halberd
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 ENDO Katsuhiro <ka2hiro@kagizaraya.jp>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum layer_names {
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ *
+ * ,----------------------------------------------------------------------------.
+ * | Q | W | E | R | T | Y | U | I | O | P | BkSp |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | A | S | D | F | G | H | J | K | L | ; | Enter|
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Z | X | C | V | B | N | M | , | . | / | Shift|
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ * | GUI | LOWER|Ctrl/Esc|Space| RAISE| Alt | Tab |
+ * `------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+ KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT,
+ KC_LGUI, LOWER, MT(MOD_LCTL, KC_ESC), KC_SPC, RAISE, KC_LALT, KC_TAB
+),
+
+/* Raise
+ *
+ * ,----------------------------------------------------------------------------.
+ * | ! | @ | # | $ | % | ^ | & | * | ( | ) | |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Tab | _ | + | | | ~ | : | " | > | { | } | |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Caps| - | = | \ | ` | ; | ' | < | [ | ] | |
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ * | | | | | | | |
+ * `------------------------------------------------'
+ */
+[_RAISE] = LAYOUT(
+ KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+ KC_TAB, KC_UNDS, KC_PLUS, KC_PIPE, KC_TILD, KC_COLN, KC_DQUO, KC_GT, KC_LCBR, KC_RCBR, _______,
+ KC_CAPS, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_SCLN, KC_QUOT, KC_LT, KC_LBRC, KC_RBRC, _______,
+ _______, _______, _______, _______, _______, _______, _______
+),
+
+/* Lower
+ *
+ * ,----------------------------------------------------------------------------.
+ * | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Tab | | | |Enter | Left | Down | Up | Right| Enter| |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Ctrl| | GUI | Alt | Del | BkSp | PgUp | PgDn | | | |
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ * | | | | | | | |
+ * `------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+ KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+ KC_TAB, _______, _______, _______, KC_ENT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_ENT, _______,
+ KC_LCTL, _______, KC_LGUI, KC_LALT, KC_DEL, KC_BSPC, KC_PGUP, KC_PGDN, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______
+),
+
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------------------------------------------------.
+ * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | F11 | F12 | |RGBSAI|RGBSAD|RGBVAI|RGBVAD| | | | |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD| Prev | Next | Vol- | Vol+ | Play | |
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ * | | | | | | | |
+ * `------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT(
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,
+ KC_F11, KC_F12, RGB_RMOD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,
+ RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_MPRV, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______,
+ _______, _______, _______, _______, _______, _______, _______
+)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ // persistant_default_layer_set(1UL<<_QWERTY);
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ return false;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# Modifiers on the right side.
+
--- /dev/null
+# Halberd
+
+
+
+40% keyboard.
+
+Keyboard Maintainer: [ka2hiro](https://github.com/ka2hiro) [@ka2hiro](https://twitter.com/ka2hiro)
+Hardware Supported: Halberd PCB, ATMEGA32U4
+Hardware Availability: [@kagizaraya](https://twitter.com/kagizaraya)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make halberd:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
projects / qmk_firmware.git / commitdiff