along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
+#pragma once
/* Use I2C or Serial */
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
-#endif
-#include "crkbd.h"
+#include QMK_KEYBOARD_H
#include "bootloader.h"
-#include "action_layer.h"
-#include "action_util.h"
-#include "eeconfig.h"
#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#include "split_util.h"
+ #include "lufa.h"
+ #include "split_util.h"
#endif
-#include "LUFA/Drivers/Peripheral/TWI.h"
#ifdef SSD1306OLED
+ #include "LUFA/Drivers/Peripheral/TWI.h"
#include "ssd1306.h"
#endif
-#include "../lib/mode_icon_reader.c"
-#include "../lib/layer_state_reader.c"
-#include "../lib/host_led_state_reader.c"
-#include "../lib/logo_reader.c"
-#include "../lib/keylogger.c"
-#include "../lib/timelogger.c"
-
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
+ // If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
set_keylog(keycode, record);
- set_timelog();
+ // set_timelog();
}
switch (keycode) {
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-ONEHAND_ENABLE = no # Enable one-hand typing
+SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+# If you want to change the display of OLED, you need to change here
+SRC += ../lib/rgb_state_reader.c \
+ ../lib/layer_state_reader.c \
+ ../lib/logo_reader.c \
+ ../lib/keylogger.c \
+ # ../lib/mode_icon_reader.c \
+ # ../lib/host_led_state_reader.c \
+ # ../lib/timelogger.c \
+#include <stdio.h>
#include "crkbd.h"
-char host_led_state[40];
+char host_led_state_str[24];
-char *read_host_led_state(void)
+const char *read_host_led_state(void)
{
- snprintf(host_led_state, sizeof(host_led_state), "\n%s %s %s",
- (host_keyboard_leds() & (1 << USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
+ uint8_t leds = host_keyboard_leds();
+ snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
+ (leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
+ (leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
+ (leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- ");
- return host_led_state;
+ return host_led_state_str;
}
+#include <stdio.h>
#include "crkbd.h"
-char keylog[40] = {};
-char keylogs[21] = {};
-int keylogs_idx = 0;
+char keylog_str[24] = {};
+char keylogs_str[21] = {};
+int keylogs_str_idx = 0;
-char code_to_name[60] = {
+const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ',
' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '};
-void set_keylog(uint16_t keycode, keyrecord_t *record)
-{
+void set_keylog(uint16_t keycode, keyrecord_t *record) {
char name = ' ';
- if (keycode < 60)
- {
+ if (keycode < 60) {
name = code_to_name[keycode];
}
// update keylog
- snprintf(keylog, sizeof(keylog), "%dx%d, k%2d : %c",
- record->event.key.row,
- record->event.key.col,
- keycode,
- name);
+ snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
+ record->event.key.row, record->event.key.col,
+ keycode, name);
// update keylogs
- if (keylogs_idx == sizeof(keylogs) - 1)
- {
- keylogs_idx = 0;
- for (int i = 0; i < sizeof(keylogs) - 1; i++)
- {
- keylogs[i] = ' ';
+ if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
+ keylogs_str_idx = 0;
+ for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
+ keylogs_str[i] = ' ';
}
}
- keylogs[keylogs_idx] = name;
- keylogs_idx++;
+
+ keylogs_str[keylogs_str_idx] = name;
+ keylogs_str_idx++;
}
-char *read_keylog(void) {
- return keylog;
+const char *read_keylog(void) {
+ return keylog_str;
}
-char *read_keylogs(void) {
- return keylogs;
+const char *read_keylogs(void) {
+ return keylogs_str;
}
+
+#include QMK_KEYBOARD_H
+#include <stdio.h>
#include "crkbd.h"
#define L_BASE 0
#define L_ADJUST 65536
#define L_ADJUST_TRI 65560
-char layer_state_str[40];
+char layer_state_str[24];
-char *read_layer_state(void)
-{
+const char *read_layer_state(void) {
switch (layer_state)
{
- case L_BASE:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default");
- break;
- case L_RAISE:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
- break;
- case L_LOWER:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
- break;
- case L_ADJUST:
- case L_ADJUST_TRI:
- snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
- break;
- default:
- snprintf(layer_state_str,sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
+ case L_BASE:
+ snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default");
+ break;
+ case L_RAISE:
+ snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
+ break;
+ case L_LOWER:
+ snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
+ break;
+ case L_ADJUST:
+ case L_ADJUST_TRI:
+ snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
+ break;
+ default:
+ snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
}
return layer_state_str;
#include "crkbd.h"
-char *read_logo(void)
-{
- static char logo[]={
- 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
- 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
- 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
- 0};
+const char *read_logo(void) {
+ static char logo[] = {
+ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+ 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+ 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+ 0};
return logo;
}
+#include <stdio.h>
#include "crkbd.h"
-char mode_icon[40];
+char mode_icon[24];
-char *read_mode_icon(bool swap)
-{
- static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
- if(swap == false){
+const char *read_mode_icon(bool swap) {
+ static char logo[][2][3] = {{{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}};
+ if (swap == false) {
snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[0][0], logo[0][1]);
- }else{
+ } else {
snprintf(mode_icon, sizeof(mode_icon), "%s\n%s", logo[1][0], logo[1][1]);
}
--- /dev/null
+#ifdef RGBLIGHT_ENABLE
+
+#include QMK_KEYBOARD_H
+#include <stdio.h>
+
+extern rgblight_config_t rgblight_config;
+char rbf_info_str[24];
+const char *read_rgb_info(void) {
+
+ snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d",
+ rgblight_config.enable ? "on" : "- ", rgblight_config.mode,
+ rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+ return rbf_info_str;
+}
+#endif
+#include <stdio.h>
#include "crkbd.h"
-char timelog[40] = {};
+char timelog_str[24] = {};
int last_time = 0;
int elapsed_time = 0;
-void set_timelog(void)
-{
+void set_timelog(void) {
elapsed_time = timer_elapsed(last_time);
last_time = timer_read();
- snprintf(timelog, sizeof(timelog), "lt:%5d, et:%5d", last_time, elapsed_time);
+ snprintf(timelog_str, sizeof(timelog_str), "lt:%5d, et:%5d", last_time, elapsed_time);
}
-char *read_timelog(void)
-{
- return timelog;
+const char *read_timelog(void) {
+ return timelog_str;
}
#include "split_util.h"
#endif
#ifdef SSD1306OLED
+ #include "LUFA/Drivers/Peripheral/TWI.h"
#include "ssd1306.h"
#endif
-#include "../lib/mode_icon_reader.c"
-#include "../lib/layer_state_reader.c"
-#include "../lib/host_led_state_reader.c"
-#include "../lib/logo_reader.c"
-#include "../lib/keylogger.c"
-#include "../lib/timelogger.c"
-
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, F11, F12, XXXXX, KANJI, ENT, XXXXX, XXXXX, COMM, DOT, SLSH, RO,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- _____, _____, DEL, XXXXX, _____, APP \
+ _____, _____, DEL, _____, _____, APP \
//`--------------------' `--------------------'
),
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 0, 1, 2, 3, DOT, XXXXX,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- _____, _____, XXXXX, XXXXX, _____, LALT \
+ _____, _____, BSPC, _____, _____, LALT \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
- RST, LRST, KNRM, KSWP, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, PGUP, XXXXX,\
- //|------+------+------+------+------+------| |------+------+------+------+------+------|
- LSMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, HOME, PGDN, END,\
+ _____, RST, LRST, KNRM, KSWP,XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+ //|------+-------+------+------+------+-----| |------+------+------+------+------+------|
+ _____, LTOG, LHUI, LSAI, LVAI,XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, PGUP, XXXXX,\
+ //|------+-------+------+------+------+-----| |------+------+------+------+------+------|
+ _____, LSMOD, LHUD, LSAD, LVAD,XXXXX, XXXXX, XXXXX, XXXXX, HOME, PGDN, END,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
- _____, _____, XXXXX, XXXXX, _____, XXXXX \
+ _____, _____, XXXXX, _____, _____, XXXXX \
//`--------------------' `--------------------'
)
};
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
+ TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+#ifdef RGBLIGHT_ENABLE
+ const char *read_rgb_info(void);
+ #define RENDER_RGB_INFO(m) matrix_write_ln(m, (const char*)read_rgb_info())
+#else
+ #define RENDER_RGB_INFO(m)
+#endif
+
+
void matrix_scan_user(void) {
iota_gfx_task();
}
inline void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
+ // If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
- matrix_write_ln(matrix, read_keylogs());
- //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
- //matrix_write_ln(matrix, read_host_led_state());
- //matrix_write_ln(matrix, read_timelog());
+ RENDER_RGB_INFO(matrix);
+ // matrix_write_ln(matrix, read_keylogs());
+ // matrix_write_ln(matrix, read_host_led_state());
+
+ // matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+ // matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
#ifdef SSD1306OLED
if (record->event.pressed) {
set_keylog(keycode, record);
- set_timelog();
+ // set_timelog();
}
#endif
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC += ../lib/rgb_state_reader.c \
+ ../lib/layer_state_reader.c \
+ ../lib/logo_reader.c \
+ ../lib/keylogger.c \
+ # ../lib/mode_icon_reader.c \
+ # ../lib/host_led_state_reader.c \
+ # ../lib/timelogger.c \
projects / qmk_firmware.git / commitdiff