--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#ifdef SUBPROJECT_rev1
+ #include "rev1/config.h"
+#endif
+#ifdef SUBPROJECT_rev2
+ #include "rev2/config.h"
+#endif
+
+#endif
--- /dev/null
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+ uint16_t lim = 0;
+ while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+ lim++;
+
+ // easier way, but will wait slightly longer
+ // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+ // no prescaler
+ TWSR = 0;
+ // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+ // Check datasheets for more info.
+ TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+// 1 => error
+uint8_t i2c_master_start(uint8_t address) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+ i2c_delay();
+
+ // check that we started successfully
+ if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+ return 1;
+
+ TWDR = address;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+
+ i2c_delay();
+
+ if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+ return 1; // slave did not acknowledge
+ else
+ return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+ uint16_t lim = 0;
+ while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+ lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+// 1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+ TWDR = data;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+
+ i2c_delay();
+
+ // check if the slave acknowledged us
+ return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+ i2c_delay();
+ return TWDR;
+}
+
+void i2c_reset_state(void) {
+ TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+ TWAR = address << 0; // slave i2c address
+ // TWEN - twi enable
+ // TWEA - enable address acknowledgement
+ // TWINT - twi interrupt flag
+ // TWIE - enable the twi interrupt
+ TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+ uint8_t ack = 1;
+ switch(TW_STATUS) {
+ case TW_SR_SLA_ACK:
+ // this device has been addressed as a slave receiver
+ slave_has_register_set = false;
+ break;
+
+ case TW_SR_DATA_ACK:
+ // this device has received data as a slave receiver
+ // The first byte that we receive in this transaction sets the location
+ // of the read/write location of the slaves memory that it exposes over
+ // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
+ // slave_buffer_pos after each write.
+ if(!slave_has_register_set) {
+ slave_buffer_pos = TWDR;
+ // don't acknowledge the master if this memory loctaion is out of bounds
+ if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+ ack = 0;
+ slave_buffer_pos = 0;
+ }
+ slave_has_register_set = true;
+ } else {
+ i2c_slave_buffer[slave_buffer_pos] = TWDR;
+ BUFFER_POS_INC();
+ }
+ break;
+
+ case TW_ST_SLA_ACK:
+ case TW_ST_DATA_ACK:
+ // master has addressed this device as a slave transmitter and is
+ // requesting data.
+ TWDR = i2c_slave_buffer[slave_buffer_pos];
+ BUFFER_POS_INC();
+ break;
+
+ case TW_BUS_ERROR: // something went wrong, reset twi state
+ TWCR = 0;
+ default:
+ break;
+ }
+ // Reset everything, so we are ready for the next TWI interrupt
+ TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
--- /dev/null
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK 400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+ return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+ return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#define TAPPING_TERM 150
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#define BACKLIGHT_PIN B6
+//#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 7
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "levinson.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _FN3 5
+#define _FN4 6
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ FN3,
+ FN4,
+ ADJUST,
+};
+
+#define KC_ KC_TRNS
+#define _______ KC_TRNS
+
+#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen
+#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen
+#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen
+#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen
+#define KC_X0 MT(MOD_LCTL, KC_ESC)
+#define KC_X1 LOWER
+#define KC_X2 RAISE
+#define KC_X3 LT(_FN3, KC_GRV)
+#define KC_X4 MT(MOD_LSFT, KC_ENT)
+#define KC_X5 BL_STEP
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_QWERTY] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, X4 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL, X1 ,LGUI,SPC ,SPC , BSPC,BSPC, X2 ,RALT, UP ,RGHT
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_COLEMAK] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB , Q , W , F , P , G , J , L , U , Y ,SCLN,MINS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , R , S , T , D , H , N , E , I , O ,QUOT,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT, Z , X , C , V , B , K , M ,COMM,DOT ,SLSH, X4 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL, X1 ,LGUI,SPC ,SPC , BSPC,BSPC, X2 ,RALT, UP ,RGHT
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_DVORAK] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ TAB ,QUOT,COMM,DOT , P , Y , F , G , C , R , L ,MINS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X0 , A , O , E , U , I , D , H , T , N , S ,SLSH,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ LSFT,SCLN, Q , J , K , X , B , M , W , V , Z , X4 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ X3 ,LCTL, X1 ,LGUI,SPC ,SPC , BSPC,BSPC, X2 ,RALT, UP ,RGHT
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_LOWER] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ X5 , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , ,DEL , DEL , , P0 ,PDOT, ,
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_RAISE] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , ,
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+ [_FN3] = KC_KEYMAP(
+ //,----+----+----+----+----+----. ,----+----+----+----+----+----.
+ F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , , ,
+ //|----+----+----+----+----+----| |----+----+----+----+----+----|
+ , , , , , , , , , , ,
+ //`----+----+----+----+----+----' `----+----+----+----+----+----'
+ ),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+ [_ADJUST] = KEYMAP( \
+ _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
+ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ )
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_qwerty);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_colemak);
+ #endif
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_dvorak);
+ #endif
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "levinson.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ COLEMAK,
+ DVORAK,
+ LOWER,
+ RAISE,
+ ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | R | S | T | D | H | N | E | I | O | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = KEYMAP( \
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
+ KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | O | E | U | I | D | H | T | N | S | / |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = KEYMAP( \
+ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
+ KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
+ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
+ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = KEYMAP( \
+ _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2] = SONG(QWERTY_SOUND);
+float tone_dvorak[][2] = SONG(DVORAK_SOUND);
+float tone_colemak[][2] = SONG(COLEMAK_SOUND);
+#endif
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_qwerty);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_colemak);
+ #endif
+ persistent_default_layer_set(1UL<<_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_dvorak);
+ #endif
+ persistent_default_layer_set(1UL<<_DVORAK);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
\ No newline at end of file
--- /dev/null
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#include "levinson.h"
+
+#ifdef ONEHAND_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+
+ {{5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+ {{5, 5}, {4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+ {{5, 6}, {4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+ {{5, 7}, {4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
+ {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}},
+ {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}},
+ {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}},
+ {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}},
+};
+#endif
--- /dev/null
+#ifndef LEVINSON_H
+#define LEVINSON_H
+
+#include "quantum.h"
+
+#include QMK_SUBPROJECT_H
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ KEYMAP( \
+ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+ KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+ )
+
+#define LAYOUT_ortho_4x12 KEYMAP
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+#include "backlight.h"
+
+#ifdef USE_I2C
+# include "i2c.h"
+#else // USE_SERIAL
+# include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+ static uint16_t debouncing_time;
+ static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+# define print_matrix_header() print("\nr/c 01234567\n")
+# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop(matrix[i])
+# define ROW_SHIFTER ((uint8_t)1)
+#else
+# error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define SERIAL_LED_ADDR 0x00
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+ static void init_cols(void);
+ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+ static void unselect_rows(void);
+ static void select_row(uint8_t row);
+ static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+ static void init_rows(void);
+ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+ static void unselect_cols(void);
+ static void unselect_col(uint8_t col);
+ static void select_col(uint8_t col);
+#endif
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+ matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+ matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ debug_enable = true;
+ debug_matrix = true;
+ debug_mouse = true;
+ // initialize row and col
+ unselect_rows();
+ init_cols();
+
+ TX_RX_LED_INIT;
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+ int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+ // Set row, read cols
+ for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+# if (DEBOUNCING_DELAY > 0)
+ bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+ if (matrix_changed) {
+ debouncing = true;
+ debouncing_time = timer_read();
+ PORTD ^= (1 << 2);
+ }
+
+# else
+ read_cols_on_row(matrix+offset, current_row);
+# endif
+
+ }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+ // Set col, read rows
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+# if (DEBOUNCING_DELAY > 0)
+ bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+ if (matrix_changed) {
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+# else
+ read_rows_on_col(matrix+offset, current_col);
+# endif
+
+ }
+#endif
+
+# if (DEBOUNCING_DELAY > 0)
+ if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+ for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+ matrix[i+offset] = matrix_debouncing[i+offset];
+ }
+ debouncing = false;
+ }
+# endif
+
+ return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+ int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+ if (err) goto i2c_error;
+
+ // start of matrix stored at 0x00
+ err = i2c_master_write(0x00);
+ if (err) goto i2c_error;
+
+ // Start read
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+ if (err) goto i2c_error;
+
+ if (!err) {
+ int i;
+ for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+ matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+ }
+ matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+ i2c_master_stop();
+ } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+ i2c_reset_state();
+ return err;
+ }
+
+ return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+ if (serial_update_buffers()) {
+ return 1;
+ }
+
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = serial_slave_buffer[i];
+ }
+
+#ifdef BACKLIGHT_ENABLE
+ // Write backlight level for slave to read
+ serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
+#endif
+ return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+ uint8_t ret = _matrix_scan();
+
+#ifdef USE_I2C
+ if( i2c_transaction() ) {
+#else // USE_SERIAL
+ if( serial_transaction() ) {
+#endif
+ // turn on the indicator led when halves are disconnected
+ TXLED1;
+
+ error_count++;
+
+ if (error_count > ERROR_DISCONNECT_COUNT) {
+ // reset other half if disconnected
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = 0;
+ }
+ }
+ } else {
+ // turn off the indicator led on no error
+ TXLED0;
+ error_count = 0;
+ }
+ matrix_scan_quantum();
+ return ret;
+}
+
+void matrix_slave_scan(void) {
+ _matrix_scan();
+
+ int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ i2c_slave_buffer[i] = matrix[offset+i];
+ }
+#else // USE_SERIAL
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ serial_slave_buffer[i] = matrix[offset+i];
+ }
+
+#ifdef BACKLIGHT_ENABLE
+ // Read backlight level sent from master and update level on slave
+ backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
+#endif
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ uint8_t pin = col_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[current_row];
+
+ // Clear data in matrix row
+ current_matrix[current_row] = 0;
+
+ // Select row and wait for row selecton to stabilize
+ select_row(current_row);
+ wait_us(30);
+
+ // For each col...
+ for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+ // Select the col pin to read (active low)
+ uint8_t pin = col_pins[col_index];
+ uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+ // Populate the matrix row with the state of the col pin
+ current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
+ }
+
+ // Unselect row
+ unselect_row(current_row);
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+ uint8_t pin = row_pins[row];
+ _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
+ _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+ uint8_t pin = row_pins[row];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+ for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+ uint8_t pin = row_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+ for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+ uint8_t pin = row_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+ bool matrix_changed = false;
+
+ // Select col and wait for col selecton to stabilize
+ select_col(current_col);
+ wait_us(30);
+
+ // For each row...
+ for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+ {
+
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[row_index];
+
+ // Check row pin state
+ if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+ {
+ // Pin LO, set col bit
+ current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+ }
+ else
+ {
+ // Pin HI, clear col bit
+ current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+ }
+
+ // Determine if the matrix changed state
+ if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+ {
+ matrix_changed = true;
+ }
+ }
+
+ // Unselect col
+ unselect_col(current_col);
+
+ return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+ uint8_t pin = col_pins[col];
+ _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
+ _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+ uint8_t pin = col_pins[col];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ uint8_t pin = col_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+#endif
--- /dev/null
+Levinson
+========
+
+A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. [More info at Keebio](https://keeb.io).
+
+Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)
+Hardware Supported: Pro Micro
+Hardware Availability: [Keebio](https://keeb.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make levinson-rev1-default
+
+Example of flashing this keyboard:
+
+ make levinson-rev1-default-avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+A build guide for this keyboard can be found here: [Nyquist Build Guide](https://docs.keeb.io)
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "../config.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCEEB
+#define PRODUCT_ID 0x1146
+#define DEVICE_VER 0x0100
+#define MANUFACTURER Keebio
+#define PRODUCT Levinson
+#define DESCRIPTION Split 40 percent ortholinear keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
+
+#define CATERINA_BOOTLOADER
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 7
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 12 // Number of LEDs
+#define ws2812_PORTREG PORTD
+#define ws2812_DDRREG DDRD
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif
--- /dev/null
+#include "levinson.h"
+
+#ifdef AUDIO_ENABLE
+ float tone_startup[][2] = SONG(STARTUP_SOUND);
+ float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
+#endif
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+ #ifdef AUDIO_ENABLE
+ _delay_ms(20); // gets rid of tick
+ PLAY_SONG(tone_startup);
+ #endif
+
+ // // green led on
+ // DDRD |= (1<<5);
+ // PORTD &= ~(1<<5);
+
+ // // orange led on
+ // DDRB |= (1<<0);
+ // PORTB &= ~(1<<0);
+
+ matrix_init_user();
+};
+
+void shutdown_user(void) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_goodbye);
+ _delay_ms(150);
+ stop_all_notes();
+ #endif
+}
--- /dev/null
+#ifndef REV2_H
+#define REV2_H
+
+#include "../levinson.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#ifndef FLIP_HALF
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define KEYMAP( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R05, R04, R03, R02, R01, R00 }, \
+ { R15, R14, R13, R12, R11, R10 }, \
+ { R25, R24, R23, R22, R21, R20 }, \
+ { R35, R34, R33, R32, R31, R30 } \
+ }
+#else
+// Keymap with right side flipped
+// (TRRS jack on both halves are to the right)
+#define KEYMAP( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R00, R01, R02, R03, R04, R05 }, \
+ { R10, R11, R12, R13, R14, R15 }, \
+ { R20, R21, R22, R23, R24, R25 }, \
+ { R30, R31, R32, R33, R34, R35 } \
+ }
+#endif
+
+#endif
--- /dev/null
+BACKLIGHT_ENABLE = yes
--- /dev/null
+SRC += matrix.c \
+ i2c.c \
+ split_util.c \
+ serial.c \
+ ssd1306.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SUBPROJECT_rev1 = yes
+USE_I2C = yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+LAYOUTS = ortho_4x12
\ No newline at end of file
--- /dev/null
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+ _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+ SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+ SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
+ SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+ return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+ SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+ SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+ serial_output();
+ serial_high();
+}
+
+void serial_slave_init(void) {
+ serial_input();
+
+ // Enable INT0
+ EIMSK |= _BV(INT0);
+ // Trigger on falling edge of INT0
+ EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+ serial_input();
+ // This shouldn't hang if the slave disconnects because the
+ // serial line will float to high if the slave does disconnect.
+ while (!serial_read_pin());
+ serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+ serial_output();
+
+ serial_low();
+ serial_delay();
+
+ serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+ uint8_t byte = 0;
+ serial_input();
+ for ( uint8_t i = 0; i < 8; ++i) {
+ byte = (byte << 1) | serial_read_pin();
+ serial_delay();
+ _delay_us(1);
+ }
+
+ return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+ uint8_t b = 8;
+ serial_output();
+ while( b-- ) {
+ if(data & (1 << b)) {
+ serial_high();
+ } else {
+ serial_low();
+ }
+ serial_delay();
+ }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+ sync_send();
+
+ uint8_t checksum = 0;
+ for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+ serial_write_byte(serial_slave_buffer[i]);
+ sync_send();
+ checksum += serial_slave_buffer[i];
+ }
+ serial_write_byte(checksum);
+ sync_send();
+
+ // wait for the sync to finish sending
+ serial_delay();
+
+ // read the middle of pulses
+ _delay_us(SERIAL_DELAY/2);
+
+ uint8_t checksum_computed = 0;
+ for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+ serial_master_buffer[i] = serial_read_byte();
+ sync_send();
+ checksum_computed += serial_master_buffer[i];
+ }
+ uint8_t checksum_received = serial_read_byte();
+ sync_send();
+
+ serial_input(); // end transaction
+
+ if ( checksum_computed != checksum_received ) {
+ status |= SLAVE_DATA_CORRUPT;
+ } else {
+ status &= ~SLAVE_DATA_CORRUPT;
+ }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+ return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+ // this code is very time dependent, so we need to disable interrupts
+ cli();
+
+ // signal to the slave that we want to start a transaction
+ serial_output();
+ serial_low();
+ _delay_us(1);
+
+ // wait for the slaves response
+ serial_input();
+ serial_high();
+ _delay_us(SERIAL_DELAY);
+
+ // check if the slave is present
+ if (serial_read_pin()) {
+ // slave failed to pull the line low, assume not present
+ sei();
+ return 1;
+ }
+
+ // if the slave is present syncronize with it
+ sync_recv();
+
+ uint8_t checksum_computed = 0;
+ // receive data from the slave
+ for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+ serial_slave_buffer[i] = serial_read_byte();
+ sync_recv();
+ checksum_computed += serial_slave_buffer[i];
+ }
+ uint8_t checksum_received = serial_read_byte();
+ sync_recv();
+
+ if (checksum_computed != checksum_received) {
+ sei();
+ return 1;
+ }
+
+ uint8_t checksum = 0;
+ // send data to the slave
+ for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+ serial_write_byte(serial_master_buffer[i]);
+ sync_recv();
+ checksum += serial_master_buffer[i];
+ }
+ serial_write_byte(checksum);
+ sync_recv();
+
+ // always, release the line when not in use
+ serial_output();
+ serial_high();
+
+ sei();
+ return 0;
+}
+
+#endif
--- /dev/null
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO: some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif
--- /dev/null
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef USE_I2C
+# include "i2c.h"
+#else
+# include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+ #ifdef EE_HANDS
+ isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+ #else
+ // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+ #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+ isLeftHand = !has_usb();
+ #else
+ isLeftHand = has_usb();
+ #endif
+ #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+ i2c_master_init();
+#ifdef SSD1306OLED
+ matrix_master_OLED_init();
+#endif
+#else
+ serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+ timer_init();
+#ifdef USE_I2C
+ i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+ serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+ USBCON |= (1 << OTGPADE); //enables VBUS pad
+ _delay_us(5);
+ return (USBSTA & (1<<VBUS)); //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+ setup_handedness();
+
+ if (has_usb()) {
+ keyboard_master_setup();
+ } else {
+ keyboard_slave_setup();
+ }
+ sei();
+}
+
+void keyboard_slave_loop(void) {
+ matrix_init();
+
+ while (1) {
+ matrix_slave_scan();
+ }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+ split_keyboard_setup();
+
+ if (!has_usb()) {
+ keyboard_slave_loop();
+ }
+}
--- /dev/null
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS 0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif
--- /dev/null
+SUBPROJECT_DEFAULT = rev1
projects / qmk_firmware.git / commitdiff