--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Bathroom Epiphanies
+#define PRODUCT frosty_flake
+#define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid
+
+/*
+ * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies
+ * Ported from the Bathroom Epiphanies TMK Firmware:
+ * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers
+ *
+ */
+
+/* key matrix size */
+#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic
+#define MATRIX_COLS 18 // ColA - ColR in the schematic
+
+/*
+ * Keyboard Matrix Assignments
+ */
+#define UNUSED_PINS { B0, C4, D3 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+#include "frosty_flake.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ DDRB |= (1<<7);
+ DDRC |= (1<<5) | (1<<6);
+
+ print_dec(usb_led);
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ PORTC &= ~(1<<5);
+ else
+ PORTC |= (1<<5);
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ PORTB &= ~(1<<7);
+ else
+ PORTB |= (1<<7);
+
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ PORTC &= ~(1<<6);
+ else
+ PORTC |= (1<<6);
+
+ led_set_user(usb_led);
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+}
\ No newline at end of file
--- /dev/null
+#ifndef FROSTY_FLAKE_H
+#define FROSTY_FLAKE_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+/*
+ Matrix col/row mapping
+
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+ `----' `-------------------' `-------------------' `-------------------' `--------------'
+ ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+ | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
+ |-------------------------------------------------------------------------| |--------------| |-------------------|
+ | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
+ |-------------------------------------------------------------------------| '--------------' |-------------- |
+ | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
+ |-------------------------------------------------------------------------| ,----. |-------------------|
+ | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
+ |-------------------------------------------------------------------------| ,--------------. |-------------- |
+ | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
+ `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+#define KEYMAP( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
+ KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \
+/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \
+/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
+/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \
+/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \
+/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
+}
+
+/*
+ Matrix col/row mapping (TKL)
+
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+ `----' `-------------------' `-------------------' `-------------------' `--------------'
+ ,-------------------------------------------------------------------------. ,--------------.
+ | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 |
+ |-------------------------------------------------------------------------| |--------------|
+ | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 |
+ |-------------------------------------------------------------------------| '--------------'
+ | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 |
+ |-------------------------------------------------------------------------| ,----.
+ | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 |
+ |-------------------------------------------------------------------------| ,--------------.
+ | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 |
+ `-------------------------------------------------------------------------' `--------------'
+*/
+
+#define KEYMAP_TKL( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \
+ KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KC_NO, KR0 }, \
+/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KC_NO, KC_NO, KC_NO, KN2, KC_NO, KP2, KC_NO, KR2 }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KC_NO, KC_NO, KM3, KN3, KC_NO, KC_NO, KC_NO, KR3 }, \
+/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
+/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KR5 }, \
+/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KC_NO, KC_NO, KC_NO, KO6, KC_NO, KC_NO, KR6 }, \
+/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
+}
+
+#define LAYOUT_tkl_ansi( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \
+ KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \
+) KEYMAP_TKL( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \
+ KN2, KC_NO, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \
+)
+
+#endif
--- /dev/null
+
+#define TAPPING_TERM 150 //reduce time required to register a held key
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+#include "frosty_flake.h"
+#include "action_layer.h"
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif
+#include "eeconfig.h"
+
+enum QFR_layers {
+ _COLEMAK,
+ _QWERTY,
+ _DVORAK,
+ _LOWER,
+ _MOUSE
+};
+
+enum QFR_keycodes {
+ COLEMAK = SAFE_RANGE,
+ QWERTY,
+ DVORAK,
+ LOWER,
+ MOUSE
+};
+
+enum custom_macros {
+ R_PIPE,
+ R_POINT
+};
+
+ const uint16_t PROGMEM fn_actions[] = { //ACTION_LAYER_TAP_TOGGLE requires that number of taps be defined in *config.h* - default set to 5
+ [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), //Hold for momentary Lower layer, Tap for Space,
+ [1] = ACTION_LAYER_MOMENTARY(_MOUSE) //Hold for momentary MOUSE
+
+ };
+
+#define SPC_LW FUNC(0)
+#define MSE FUNC(1)
+#define PIPE M(R_PIPE)
+#define POINT M(R_POINT)
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_COLEMAK] = KEYMAP_TKL(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT , \
+ KC_LSPO,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, \
+ KC_LCTL,KC_LGUI, KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT
+ ),
+
+[_QWERTY] = KEYMAP_TKL(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI , KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+[_DVORAK] = KEYMAP_TKL(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_BSPC,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_QUOT, KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+[_LOWER] = KEYMAP_TKL(\
+ RESET, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, _______, KC_MUTE, KC_VOLD, KC_VOLU, QWERTY, COLEMAK,DVORAK, \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_UNDS, KC_PLUS, KC_BSPC, _______,_______,_______, \
+ KC_TAB, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, _______,_______,_______, \
+ KC_CAPS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, \
+ _______,XXXXXXX,POINT,PIPE, KC_LCBR, KC_LBRC, KC_GRV, KC_PIPE, KC_RBRC, KC_RCBR, _______, _______, _______, _______, \
+ _______, _______, _______, _______, KC_RALT, _______, _______, _______, _______,_______,_______ \
+ ),
+
+[_MOUSE] = KEYMAP_TKL(\
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, _______,_______,_______, \
+ KC_TAB, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX, KC_BTN3, KC_BTN4, KC_BTN5, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, _______,_______,_______, \
+ KC_BSPC, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
+ _______,XXXXXXX,PIPE,POINT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, \
+ _______, _______, _______, KC_ACL2, MSE, _______, _______, _______, _______,_______,_______ \
+ )
+};
+
+// Macros to send R pointer & dplyr pipe
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ switch(id) {
+ case R_POINT:
+ if (record->event.pressed) { // pointer
+ SEND_STRING("<- ");
+// return MACRO(D(LSFT), T(COMM), U(LSFT), T(MINS), END);
+ }
+ break;
+ case R_PIPE:
+ if (record->event.pressed) { // dplyr pipe
+ SEND_STRING("%>% ");
+// return MACRO(D(LSFT), T(5), T(DOT), T(5), U(LSFT), END);
+ }
+ break;
+ }
+ return MACRO_NONE;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ return false;
+ break;
+ case COLEMAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_COLEMAK);
+ }
+ return false;
+ break;
+ case DVORAK:
+ if (record->event.pressed) {
+ set_single_persistent_default_layer(_DVORAK);
+ }
+ return false;
+ break;
+ }
+ return true;
+}
\ No newline at end of file
--- /dev/null
+
+# TKL keymap for frosty\_flake
+```
+make frosty_flake:QFR_JM
+
+dfu-programmer atmega32u2 erase
+dfu-programmer atmega32u2 flash frosty_flake_QFR_JM.hex
+dfu-programmer atmega32u2 start
+```
+
+##Layers
+```
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk|
+ '----' '-------------------' '-------------------' '-------------------' '--------------'
+ ,-------------------------------------------------------------------------. ,--------------.
+ | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bspc | | Ins|Home|PgUp|
+ |-------------------------------------------------------------------------| |--------------|
+ | Tab | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | | Del|End |PgDn|
+ |-------------------------------------------------------------------------| '--------------'
+ | Bspc | A | R | S | T | D | H | N | E | I | O | ' | Enter |
+ |-------------------------------------------------------------------------| ,----.
+ | LSPO | Z | X | C | V | B | K | M | , | . | / | RSPC | | Up |
+ |-------------------------------------------------------------------------| ,--------------.
+ |Ctrl|LGUI|LAlt| Space/Lower |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght|
+ '-------------------------------------------------------------------------' '--------------'
+
+```
+### Base Layer - Colemak
+The base layout is Colemak by default, but this can be changed to QWERTY via the *LOWER* layer.
+* I've implemented COLEMAK = SAFE\_RANGE when enumerating the custom\_keycodes, but I don't actually know what this does...
+
+* Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses)
+
+#### Layer Shifting
+* The spacebar is a **TAP_KEY** macro - Hold for momentary *LOWER* layer, Tap for Space.
+* The Right hand ALT key is a **TAP_TOGGLE** macro for the *MOUSE* layer (RAlt is accessible through LOWER, if you want...)
+
+### LOWER
+```
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ |ESC | | F1 | F2 | F3 | F4 | |>/|||Stop| << | >> | | F9 |MUTE|Vol-|Vol+| |QWTY|CLMK|PsBk|
+ '----' '-------------------' '-------------------' '-------------------' '--------------'
+ ,-------------------------------------------------------------------------. ,--------------.
+ | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | Bspc | | Ins|Home|PgUp|
+ |-------------------------------------------------------------------------| |--------------|
+ | Tab |PgUp|Home| Up | End| | | | | | | { | } | | | | Del|End |PgDn|
+ |-------------------------------------------------------------------------| '--------------'
+ | Bckspc|PgDn|Left|Down|Rght| | | | | | | ' | Enter |
+ |-------------------------------------------------------------------------| ,----.
+ | LSPO | <- |%>% | { | [ | ` | | | ] | } | . | / | RSPC | | Up |
+ |-------------------------------------------------------------------------| ,--------------.
+ |Ctrl|LGUI|LAlt| |RAlt|RGUI|Menu|Ctrl| |Left|Down|Rght|
+ '-------------------------------------------------------------------------' '--------------'
+```
+The *LOWER* layer contains a navigation cluster on the left hand. This layer is momentary when the spacebar or LOWER (RAlt) key is held and toggled on/off when the LOWER key is tapped.
+
+* The Navigation cluster is offset to the right compared to the traditional **WASD** nav cluster. With this implementation, you don't need to move your hand from the home position when navigating. Page Up & Down keys are found on the far left of the cluster.
+
+* All unused (blank on the above keymap) keys are locked out using the XXXXXXX filler (KC\_NO), all modifiers (edge |\_| keys \[except 0, \. & Fn\] on the above keymap) and the ZXCV cluster are transparent (\_\_\_\_\_\_\_) to the Base layer.
+
+* The base layer can be switched to QWERTY or COLEMAK by pressing the Pause Break or Scroll Lock keys respectively
+
+### MOUSE
+```
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk|
+ '----' '-------------------' '-------------------' '-------------------' '--------------'
+ ,-------------------------------------------------------------------------. ,--------------.
+ | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Del | | Ins|Home|PgUp|
+ |-------------------------------------------------------------------------| |--------------|
+ | Tab | WhU| WhL| MsU| WhR| | | M3 | M4 | M5 | | [ | ] | \ | | Del|End |PgDn|
+ |-------------------------------------------------------------------------| '--------------'
+ | BSPC | WhD| MsL| MsD| MsR| | |LClk |RClk | | | ' | Enter |
+ |-------------------------------------------------------------------------| ,----.
+ | LSPO | Z | X | C | V | | | | , | . | / | RSPC | | Up |
+ |-------------------------------------------------------------------------| ,--------------.
+ |Ctrl|LGUI|LAlt| Accel ++ |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght|
+ '-------------------------------------------------------------------------' '--------------'
+```
+The *MOUSE* layer contains keys replicating functions found on the mouse.
+
+* The navigation cluster (Up, Down, Left, Right) is a replication of the Navigation cluster on the *LOWER* layer. The scroll keys are analagous to the Page Up & Downkeys.
+* The primary click (right & left) buttons are on the right home row (index & middle fingers)
+* Secondary click buttons are above the standard keys (M3/Wheel click, M4, M5) but I do not use this function.
+
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+#include "frosty_flake.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
+};
\ No newline at end of file
--- /dev/null
+# The default keymap for frosty_flake
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define TAPPING_TERM 200
+#define LEADER_TIMEOUT 800
+
+#define DISABLE_SPACE_CADET_ROLLOVER
+
+#define UNICODE_TYPE_DELAY 0
+
+#define LSPO_KEY KC_9
+#define RSPC_KEY KC_0
+
+#define MOUSEKEY_INTERVAL 20
+#define MOUSEKEY_DELAY 0
+#define MOUSEKEY_TIME_TO_MAX 60
+#define MOUSEKEY_MAX_SPEED 7
+#define MOUSEKEY_WHEEL_DELAY 0
+// place overrides here
+
+#endif
--- /dev/null
+#include "frosty_flake.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "process_unicode.h"
+#include "process_unicodemap.h"
+#include "quantum.h"
+
+#define _______ KC_TRNS
+#define MAXEMOJITAPS 80
+
+
+//declarations for tap dancing emojis
+void register_hex32(uint32_t hex);
+void cycleEmojis(qk_tap_dance_state_t *state, void *user_data);
+void cycleAnimals(qk_tap_dance_state_t *state, void *user_data);
+void cycleFoods(qk_tap_dance_state_t *state, void *user_data);
+void cycleEtc(qk_tap_dance_state_t *state, void *user_data);
+void cycleAll(qk_tap_dance_state_t *state, void *user_data);
+
+void tap(uint16_t keycode){
+ register_code(keycode);
+ unregister_code(keycode);
+};
+
+//Tap Dance Declarations
+enum taps{
+ TD_CTCPS = 0,
+ EMOJIS,
+ ANIMAL,
+ HAND,
+ MEMES,
+ COPA,
+ ALLS
+};
+
+enum unicode_name {
+ EMOTIS = 1,//80, //1F60x - 1F64x
+ ANIMALS, //64, //1F40x - 1F43x
+ SYMBOLS,// = 45, //1F300 - 1F32C
+ FOODS,// = 87 , //1F32D -
+ ETC,// = 192, //1F44x -1F4Fx
+ VEHICLES,// = 83, //1F68x - 1F6Dx
+ SUPPLEMENT,// = 32, //1F91x-1F92x
+ ALCHEMY,// = 116 //1F70x - 1F773
+
+};
+
+enum my_macros {
+ NEWDESK = 0,
+ LEFTDESK,
+ RIGHTDESK,
+ CLOSEDESK
+};
+
+
+// Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+ // Tap once for CTRL, twice for Caps Lock
+ [TD_CTCPS] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS),
+ [COPA] = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)),
+ [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800),
+ [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800),
+ //[SYMBOLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSymbols, NULL, NULL, 800),
+ [FOODS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleFoods, NULL, NULL, 800),
+ [ETC] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEtc, NULL, NULL, 800),
+ //[VEHICLES] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleVehicles, NULL, NULL, 800),
+ //[SUPPLEMENT] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSupplement, NULL, NULL, 800),
+ [ALLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAll, NULL, NULL, 800)
+// Other declarations would go here, separated by commas, if you have them
+};
+
+// macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ switch(id) {
+ case NEWDESK: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( I(1), D(LGUI), D(LCTL), D(D), U(LGUI), U(LCTL), U(D), END ); // NEW DESKTOP
+ }
+ break;
+ case LEFTDESK: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( I(1), D(LGUI), D(LCTL), D(LEFT), U(LGUI), U(LCTL), U(LEFT), END ); // LEFT DESKTOP
+ }
+ break;
+ case RIGHTDESK: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( I(1), D(LGUI), D(LCTL), D(RGHT), U(LGUI), U(LCTL), U(RGHT), END ); // RIGHT DESKTOP
+ }
+ break;
+ case CLOSEDESK: // this would trigger when you hit a key mapped as M(0)
+ if (record->event.pressed) {
+ return MACRO( I(1), D(LGUI), D(LCTL), D(F4), U(LGUI), U(LCTL), U(F4), END ); // CLOSE DESKTOP
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+// emojis in unicode
+const uint32_t PROGMEM unicode_map[] = {
+ [EMOTIS] = 0x1F600,
+ [ANIMALS] = 0x1F400,
+ [SYMBOLS] = 0x1F300,
+ [FOODS] = 0x1F32D,
+ [ETC] = 0x1F440,
+ [VEHICLES] = 0x1F680,
+ [SUPPLEMENT] = 0x1F910,
+ [ALCHEMY] = 0x1F700
+ };
+// Layouts
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSPO,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSPC, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ TD(TD_CTCPS),KC_LGUI,KC_LALT, KC_SPC, KC_LEAD,KC_RGUI, KC_APP,MO(1) , KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT),
+[1] = KEYMAP(\
+ TD(ALLS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, TD(EMOJIS),TD(ANIMAL),TD(ETC),TD(FOODS), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, M(0), KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_UP ,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_LCTL, M(1), M(3), M(2), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_LEFT,KC_RGHT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_DOWN, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2),_______ , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT),
+[2] = KEYMAP(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_LCTL, KC_D, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2) , KC_NO , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT),
+};
+
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+ LEADER_DICTIONARY() {
+ leading = false;
+ leader_end();
+
+ SEQ_TWO_KEYS(KC_A, KC_A) { // select all and copy
+ register_code(KC_LCTL);
+ tap(KC_A);
+ tap(KC_C);
+ unregister_code(KC_LCTL);
+ }
+ }
+}
+
+void matrix_init_user(void) {
+ _delay_ms(500);
+ set_unicode_input_mode(UC_WINC);
+};
+
+void cycleAll(qk_tap_dance_state_t *state, void *user_data) {
+ if(state->count == 1) {
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[EMOTIS]));
+ unicode_input_finish();
+ }
+ else if(state->count <= 1642) {
+ tap(KC_BSPC);
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[1])+state->count);
+ unicode_input_finish();
+ }
+};
+
+
+void cycleEmojis(qk_tap_dance_state_t *state, void *user_data) {
+ if(state->count == 1) {
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[EMOTIS]));
+ unicode_input_finish();
+ }
+ else if(state->count <= 80) {
+ tap(KC_BSPC);
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[EMOTIS])+state->count);
+ unicode_input_finish();
+ }
+};
+
+void cycleAnimals(qk_tap_dance_state_t *state, void *user_data) {
+ if(state->count == 1) {
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[ANIMALS]));
+ unicode_input_finish();
+ }
+ else if(state->count <= MAXEMOJITAPS) {
+ tap(KC_BSPC);
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[ANIMALS])+state->count);
+ unicode_input_finish();
+ }
+};
+
+void cycleFoods(qk_tap_dance_state_t *state, void *user_data) {
+ if(state->count == 1) {
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[FOODS]));
+ unicode_input_finish();
+ }
+ else if(state->count <= 87) {
+ tap(KC_BSPC);
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[FOODS])+state->count);
+ unicode_input_finish();
+ }
+};
+
+
+void cycleEtc(qk_tap_dance_state_t *state, void *user_data) {
+ if(state->count == 1) {
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[ETC]));
+ unicode_input_finish();
+ }
+ else if(state->count <= MAXEMOJITAPS) {
+ tap(KC_BSPC);
+ unicode_input_start();
+ register_hex32(pgm_read_dword(&unicode_map[ETC])+state->count);
+ unicode_input_finish();
+ }
+};
+
--- /dev/null
+# The Nikchi's keymap for frosty_flake
+
+### FEATURING
+-SPACE CADET
+-Caps Lock is now LCTRL
+-LCTRL is Tap(LCTRL, Caps Lock)
+
+### LEADER KEY - RALT
+COMBOS
+-a,a => Select All, Copy
+
+
+
+### FN REBINDS for Windows
+```
+ [W] [New Desktop]
+[A][S][D] [Left Desk][Delete Desk][Right Desk]
+
+[Ins][Hom][PUp] [RW][PP][FF]
+[Del][End][PDn] [MU][VD][VU]
+
+Arrows are Mouskeys, left three mods are clicks
+
+```
\ No newline at end of file
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+UNICODEMAP_ENABLE = yes # unicodemap
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+TAP_DANCE_ENABLE = yes
+LEADER_ENABLE = yes
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+# Tap Dancing to different beats.
+Tap Dance is constrained normally by `TAPPING_TERM` defined in your keyboard's config.h This proves to be challenging to work with when sometimes you just need more time to tap out your dance, or even a different "beat".
+
+
+
+- `ACTION_TAP_DANCE_FN_ADVANCED_TIME(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, tap_specific_tapping_term)` : This works the same as `ACTION_TAP_DANCE_FN_ADVANCED` just with the extra `tap_specific_tapping_term` arguement at the end. This way you can set a specific tap dance to have a longer or shorter tap in between your taps, giving you more, or less, time in between each tap.
+
+
+`tap_specific_tapping_term` should be the same type and range of values that one would put into the `TAPPING_TERM` definition in the config.h file.
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+#include "frosty_flake.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP_TKL(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
+};
--- /dev/null
+# TKL keymap for frosty_flake
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
--- /dev/null
+/*
+ Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+static matrix_row_t scan_col(void) {
+ return (
+ (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
+ (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) |
+ (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) |
+ (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) |
+ (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) |
+ (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) |
+ (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) |
+ (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7))
+ );
+}
+
+static void select_col(uint8_t col) {
+ switch (col) {
+ case 0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break;
+ case 1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break;
+ case 2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break;
+ case 3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break;
+ case 4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break;
+ case 5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break;
+ case 6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break;
+ case 7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break;
+ case 8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break;
+ case 9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break;
+ case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break;
+ case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break;
+ case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break;
+ case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break;
+ case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break;
+ case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break;
+ case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break;
+ case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break;
+ }
+}
+
+void matrix_init(void) {
+ /* Row output pins */
+ DDRD |= 0b01111011;
+ /* Column input pins */
+ DDRC &= ~0b10000000;
+ DDRB &= ~0b01111111;
+ PORTC |= 0b10000000;
+ PORTB |= 0b01111111;
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i] = 0;
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ matrix_row_t col_scan = scan_col();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = col_scan & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing)
+ _delay_ms(1);
+ else
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i];
+ }
+
+ matrix_scan_quantum();
+ return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+#ifndef NO_PRINT
+ print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix_row_t matrix_row = matrix_get_row(row);
+ xprintf("%02X: ", row);
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ bool curr_bit = matrix_row & (1<<col);
+ xprintf("%c", curr_bit ? '*' : '.');
+ }
+ print("\n");
+ }
+#endif
+}
+
+uint8_t matrix_key_count(void) {
+ uint8_t count = 0;
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++)
+ count += bitpop32(matrix[row]);
+ return count;
+}
--- /dev/null
+# Frosty Flake Controller
+
+This is the firmware for Rev. 20140521 of the Frosty Flake controller
+by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/),
+a replacement controller for the [Cooler Master Quick Fire
+Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/).
+
+The code was adapted from the [BathroomEpiphanies TMK
+Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers),
+but has been cleaned up to match the
+[schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf)
+and gone through some minor refactoring for QMK.
+
+## 104 and 87 layout support
+
+Support for both 104 key and 87 key layouts is provided. See the
+keymaps `default` (104) and `tkl` (87) for example layouts.
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: Frosty Flake
+Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html
+
+Make example for this keyboard (after setting up your build environment):
+
+104 key default layout:
+
+```
+make bpiphany/frosty_flake:default
+```
+
+To directly flash the frosty_flake after compiling use
+
+```
+make bpiphany/frosty_flake:default:dfu
+```
+
+87 key tkl layout:
+
+```
+make bpiphany/frosty_flake:tkl:dfu
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
+
+LAYOUTS = tkl_ansi
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6050
+#define DEVICE_VER 0x0104
+#define MANUFACTURER Costar
+#define PRODUCT Majestouch
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+//#define MATRIX_ROW_PINS { D0, D5 }
+//#define MATRIX_COL_PINS { F1, F0, B0 }
+//#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "Kitten Paw",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 22.5,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 105,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"KC_NUBS", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
+ },
+
+ "LAYOUT_fullsize_ansi": {
+ "key_count": 104,
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
+ }
+ }
+}
--- /dev/null
+#include QMK_KEYBOARD_H
+
+enum layers {
+ DEFAULT,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [DEFAULT] = LAYOUT(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#undef MOUSEKEY_MOVE_MAX
+#define MOUSEKEY_MOVE_MAX 127
+#undef MOUSEKEY_WHEEL_MAX
+#define MOUSEKEY_WHEEL_MAX 110
+#undef MOUSEKEY_MOVE_DELTA
+#define MOUSEKEY_MOVE_DELTA 5
+#undef MOUSEKEY_WHEEL_DELTA
+#define MOUSEKEY_WHEEL_DELTA 1
+#undef MOUSEKEY_DELAY
+#define MOUSEKEY_DELAY 50
+#undef MOUSEKEY_INTERVAL
+#define MOUSEKEY_INTERVAL 20
+#undef MOUSEKEY_MAX_SPEED
+#define MOUSEKEY_MAX_SPEED 4
+#undef MOUSEKEY_TIME_TO_MAX
+#define MOUSEKEY_TIME_TO_MAX 30
+#undef MOUSEKEY_WHEEL_MAX_SPEED
+#define MOUSEKEY_WHEEL_MAX_SPEED 3
+#undef MOUSEKEY_WHEEL_TIME_TO_MAX
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 255
+#undef ONESHOT_TIMEOUT
+#define ONESHOT_TIMEOUT 500
+#undef TAPPING_TOGGLE
+#define TAPPING_TOGGLE 2
+
+#endif
--- /dev/null
+#include QMK_KEYBOARD_H
+#include "mousekey.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define C(kc) LCTL(KC_##kc)
+#define RA(kc) RALT(KC_##kc)
+#define KC_SLCT KC_SELECT
+#define MEDAPP LT(MEDIA, KC_APP)
+#undef S
+#define S(kc) LSFT(KC_##kc)
+
+uint8_t current_layer_global = 255;
+
+enum layers {
+ DEFAULT,
+ PROG1,
+ PROG2,
+ MEDIA,
+ MOUSE1,
+ MOUSE2,
+ MISC,
+};
+
+enum function_id {
+ LSHFT_PAREN,
+ RSHFT_PAREN,
+ LCTRL_BRACKET,
+ RCTRL_BRACKET,
+ LALT_CURLY,
+ RALT_CURLY,
+ CTRL_CLICK
+};
+
+enum macro_id {
+ GRV,
+ CFLEX
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [DEFAULT] = LAYOUT(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ F(8),KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, F(9), KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ F(1),KC_LGUI, F(3), LT(MISC, KC_SPC), F(4), F(5), MEDAPP, F(2), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT),
+ /* Layer 1: Programming Layer 1, emulating US l ayout */
+ [PROG1] = LAYOUT(\
+ KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH, S(0),_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,_______,_______,_______,_______, KC_Z,_______,_______,_______,_______, RA(8), RA(9),RA(MINS), _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS), _______, _______,_______,_______, \
+ MO(PROG2),_______, KC_Y,_______,_______,_______,_______,_______,_______,_______,_______, S(7), MO(PROG2), _______, _______,_______,_______,_______, \
+ _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______),
+ /* Layer 2: programming layer 2
+ all keys that are not FN keys are sent as LSFT+key on this layer
+ */
+ [PROG2] = LAYOUT(\
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ RA(RBRC),_______, RA(Q),KC_BSLS,_______,_______,M(CFLEX), S(6),S(RBRC), S(8), S(9),S(SLSH),KC_RBRC,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RA(7), RA(0),RA(NUBS), _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT), S(2), _______, _______,_______,_______, \
+ _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS), _______, _______, _______,_______,_______,_______, \
+ _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______),
+ /* Layer 3: media layer */
+ [MEDIA] = LAYOUT(\
+ KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \
+ XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_MPRV,KC_MPLY,KC_MNXT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+ XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_VOLD,KC_MUTE,KC_VOLU, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+ XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \
+ XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, KC_EJCT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
+ XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,_______,XXXXXXX, KC_MRWD,KC_MSTP,KC_MFFD, XXXXXXX,XXXXXXX),
+ /* Layer 4: Mouse layer */
+ [MOUSE1] = LAYOUT(\
+ F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______, C(Z),_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R, F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______, _______, _______,_______,_______, \
+ MO(MOUSE2),_______, C(Y), C(X), C(C), C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______, KC_RSFT, _______, _______,_______,_______,_______, \
+ KC_LCTL,_______,KC_LALT, KC_BTN1, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, _______,_______,_______, _______,_______),
+ /* Layer 5: Mouse layer 2*/
+ [MOUSE2] = LAYOUT(\
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______, _______, _______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______,_______,_______, \
+ _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______),
+ /* Layer 6: Misc layer */
+ [MISC] = LAYOUT(\
+ _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,KC_SLCT, C(W), KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
+ _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______, _______, _______,_______,_______, \
+ KC_LSFT,_______, C(Y), C(X), C(C), C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______, _______, _______, _______,_______,_______,_______, \
+ _______,_______,_______, LT(MISC, KC_SPC), _______,_______,_______,_______, _______,_______,_______, _______,_______),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1), // tap-toggle mouse layer (4)
+ [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET), // tap to print [
+ [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET), // tap to print ]
+ [3] = ACTION_FUNCTION_TAP(LALT_CURLY), // tap to print {
+ [4] = ACTION_FUNCTION_TAP(RALT_CURLY), // tap to print }
+ [5] = ACTION_LAYER_TAP_TOGGLE(PROG1), // tap-toggle programming layer 1
+ [6] = ACTION_LAYER_SET_CLEAR(DEFAULT),
+ [7] = ACTION_FUNCTION_TAP(CTRL_CLICK),
+ [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN), // tap to print (
+ [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN), // tap to print )
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case GRV: // macro to print accent grave
+ return (record->event.pressed ?
+ MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) :
+ MACRO_NONE );
+ case CFLEX: // print accent circonflex
+ return (record->event.pressed ?
+ MACRO( T(GRV), T(SPC), END ) :
+ MACRO_NONE );
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+ uint8_t layer;
+ layer = biton32(layer_state);
+
+ if (current_layer_global != layer) {
+ current_layer_global = layer;
+
+ // unset CAPSLOCK and SCROLL LOCK LEDs
+ led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK));
+ led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK));
+ // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active
+ if (layer == MOUSE1 || layer == MOUSE2) {
+ led_set_kb(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK));
+ } else if (layer == PROG1 || layer == PROG2) {
+ led_set_kb(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK));
+ }
+ }
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) {
+ if (record->event.pressed) {
+ if (record->tap.count > 0 && !record->tap.interrupted) {
+ if (record->tap.interrupted) {
+ register_mods(MOD_BIT(orig_mod));
+ }
+ } else {
+ register_mods(MOD_BIT(orig_mod));
+ }
+ } else {
+ if (record->tap.count > 0 && !(record->tap.interrupted)) {
+ add_weak_mods(MOD_BIT(macro_mod));
+ send_keyboard_report();
+ register_code(macro_kc);
+ unregister_code(macro_kc);
+ del_weak_mods(MOD_BIT(macro_mod));
+ send_keyboard_report();
+ record->tap.count = 0; // ad hoc: cancel tap
+ } else {
+ unregister_mods(MOD_BIT(orig_mod));
+ }
+ }
+}
+
+/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder
+ switch (id) {
+ case LCTRL_BRACKET:
+ tap_helper(record, KC_LCTL, KC_RALT, KC_8);
+ break;
+ case RCTRL_BRACKET:
+ tap_helper(record, KC_RCTL, KC_RALT, KC_9);
+ break;
+ case LALT_CURLY:
+ tap_helper(record, KC_LALT, KC_RALT, KC_7);
+ break;
+ case RALT_CURLY:
+ tap_helper(record, KC_RALT, KC_RALT, KC_0);
+ break;
+ case LSHFT_PAREN:
+ tap_helper(record, KC_LSFT, KC_LSFT, KC_8);
+ break;
+ case RSHFT_PAREN:
+ tap_helper(record, KC_RSFT, KC_LSFT, KC_9);
+ break;
+ case CTRL_CLICK:
+ if (record->event.pressed) {
+ mousekey_clear();
+ register_mods(MOD_BIT(KC_LCTL));
+ send_keyboard_report();
+ wait_ms(5);
+ mousekey_on(KC_BTN1);
+ mousekey_send();
+ wait_ms(10);
+ mousekey_off(KC_BTN1);
+ mousekey_send();
+ wait_ms(5);
+ unregister_mods(MOD_BIT(KC_LCTL));
+ send_keyboard_report();
+ }
+ break;
+ }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ uint8_t layer;
+ layer = biton32(layer_state);
+ if (layer == PROG2) {
+ if (keycode >= KC_A && keycode <= KC_EXSEL && \
+ !( // do not send LSFT + these keycodes, they are needed for emulating the US layout
+ keycode == KC_NONUS_BSLASH ||
+ keycode == KC_RBRC ||
+ keycode == KC_BSLS ||
+ keycode == KC_GRV
+ )) {
+ // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior
+ if (record->event.pressed) {
+ register_mods(MOD_LSFT);
+ } else {
+ unregister_mods(MOD_LSFT);
+ }
+ }
+ }
+ return true;
+}
--- /dev/null
+# My personal keymap for the Kitten Paw controller
+
+This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished.
+
+## Description of the layers
+Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except:
+Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer.
+Mouse and programming layer switches can be held or double-tapped to lock.
+Holding space switches to the MISC layer where I currently accumulate useful shortcuts.
+Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively.
+
+Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it.
+
+Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster.
+
+Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap.
+
+Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now.
\ No newline at end of file
--- /dev/null
+#include "kitten_paw.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ CONFIG_LED_IO;
+ CONFIG_LED_IO;
+ print_dec(usb_led);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ USB_LED_CAPS_LOCK_ON;
+ else
+ USB_LED_CAPS_LOCK_OFF;
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ USB_LED_NUM_LOCK_ON;
+ else
+ USB_LED_NUM_LOCK_OFF;
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ USB_LED_SCROLL_LOCK_ON;
+ else
+ USB_LED_SCROLL_LOCK_OFF;
+ led_set_user(usb_led);
+}
--- /dev/null
+#ifndef KITTEN_PAW_H
+#define KITTEN_PAW_H
+
+#include "quantum.h"
+
+#define CONFIG_LED_IO \
+ DDRB |= (1<<7); \
+ DDRC |= (1<<5) | (1<<6);
+
+#define USB_LED_CAPS_LOCK_ON PORTC &= ~(1<<6)
+#define USB_LED_CAPS_LOCK_OFF PORTC |= (1<<6)
+#define USB_LED_NUM_LOCK_ON PORTB &= ~(1<<7)
+#define USB_LED_NUM_LOCK_OFF PORTB |= (1<<7)
+#define USB_LED_SCROLL_LOCK_ON PORTC &= ~(1<<5)
+#define USB_LED_SCROLL_LOCK_OFF PORTC |= (1<<5)
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+/*
+ Matrix col/row mapping
+
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+ `----' `-------------------' `-------------------' `-------------------' `--------------'
+ ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+ | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
+ |-------------------------------------------------------------------------| |--------------| |-------------------|
+ | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
+ |-------------------------------------------------------------------------| '--------------' |-------------- |
+ | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
+ |-------------------------------------------------------------------------| ,----. |-------------------|
+ | N2 | I6 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
+ |-------------------------------------------------------------------------| ,--------------. |-------------- |
+ | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
+ `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+
+#define LAYOUT( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
+ KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
+) \
+{ \
+ {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \
+ { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \
+ {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \
+ {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \
+ { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \
+ { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \
+ {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \
+ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \
+}
+
+#define LAYOUT_fullsize_ansi( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
+ KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
+) \
+{ \
+ {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \
+ { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \
+ {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \
+ {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \
+ { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \
+ { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \
+ {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KC_NO,KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \
+ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \
+}
+
+#endif
--- /dev/null
+/*
+ Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(void);
+static void select_col(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline uint8_t matrix_rows(void) {
+ return MATRIX_ROWS;
+}
+
+inline uint8_t matrix_cols(void) {
+ return MATRIX_COLS;
+}
+
+/* Column pin configuration
+ *
+ * col: 0 1 2 3 4 5 6 7
+ * pin: PC7 PD5 PD3 PD1 PC2 PD6 PD4 PD2
+ *
+ * Rrr pin configuration
+ *
+ * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low
+ * active), together with 2 rrrs driven directly from the micro
+ * controller, to control the 18 rrrs. The rrrs are driven from
+ * pins B6,5,4,3,2,1,0.
+ */
+void matrix_init(void) {
+ DDRC &= ~0b10000100; // Row input pins
+ DDRD &= ~0b01111110;
+ PORTC |= 0b10000100;
+ PORTD |= 0b01111110;
+
+ DDRB |= 0b01111111; // Column output pins
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ uint8_t rows = read_rows();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = rows & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ }
+ else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+ matrix_scan_quantum();
+ return 1;
+}
+
+bool matrix_is_modified(void) {
+ if (debouncing)
+ return false;
+ else
+ return true;
+}
+
+inline bool matrix_is_on(uint8_t row, uint8_t col) {
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+ }
+}
+
+uint8_t matrix_key_count(void) {
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop32(matrix[i]);
+ }
+ return count;
+}
+
+static uint8_t read_rows(void) {
+ return
+ (PINC&(1<<7) ? 0 : (1<<0)) |
+ (PIND&(1<<5) ? 0 : (1<<1)) |
+ (PIND&(1<<3) ? 0 : (1<<2)) |
+ (PIND&(1<<1) ? 0 : (1<<3)) |
+ (PINC&(1<<2) ? 0 : (1<<4)) |
+ (PIND&(1<<2) ? 0 : (1<<5)) |
+ (PIND&(1<<4) ? 0 : (1<<6)) |
+ (PIND&(1<<6) ? 0 : (1<<7));
+}
+
+static void select_col(uint8_t col) {
+ switch (col) {
+ case 0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break;
+ case 1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break;
+ case 2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break;
+ case 3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break;
+ case 4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break;
+ case 5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break;
+ case 6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break;
+ case 7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break;
+ case 8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break;
+ case 9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break;
+ case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break;
+ case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break;
+ case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break;
+ case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break;
+ case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break;
+ case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break;
+ case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break;
+ case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break;
+ }
+}
--- /dev/null
+kitten_paw
+==========
+
+This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies).
+
+NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me.
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: Kitten Paw PCB
+Hardware Availability: https://geekhack.org/index.php?topic=46700.0
+
+Make example for this keyboard (after setting up your build environment):
+
+ make bpiphany/kitten_paw:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+ OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
+
+LAYOUTS = fullsize_ansi
--- /dev/null
+Pegasus Hoof Controller
+===
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: Pegasus Hoof
+Hardware Availability: https://1upkeyboards.com/filco-pegasus-hoof-controller.html
+
+Make example for this keyboard (after setting up your build environment):
+
+ make bpiphany/pegasus_hoof:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6050
+#define DEVICE_VER 0x0104
+#define MANUFACTURER Filco
+#define PRODUCT Majestouch TKL \\w The Pegasus Hoof
+#define DESCRIPTION QMK firmware for Majestouch TKL
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
--- /dev/null
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "pegasushoof.h"
+
+#define _______ KC_TRNS
+
+/* Swedish keys */
+#define SE_HALF KC_GRV
+#define SE_PLUS KC_MINS
+#define SE_ACUT KC_EQL
+#define SE_AO KC_LBRC
+#define SE_CIRC KC_RBRC
+#define SE_QUOT KC_BSLS
+#define SE_OE KC_SCLN
+#define SE_AE KC_QUOT
+#define SE_MINS KC_SLSH
+#define SE_LTGT KC_NUBS
+#define SE_LCBR RALT(KC_7)
+#define SE_LBRC RALT(KC_8)
+#define SE_RBRC RALT(KC_9)
+#define SE_RCBR RALT(KC_0)
+#define SE_PIPE RALT(SE_LTGT)
+#define SE_BSLS RALT(SE_PLUS)
+
+#define KM_BLOWRAK 0
+#define KM_QWERTY 1
+#define KM_MEDIA 2
+#define KM_HAXHAX 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Blowrak ISO layer, a Swedish take on Dvorak */
+ [KM_BLOWRAK] = KEYMAP( \
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
+ KC_TAB, SE_AO, SE_AE, SE_OE, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_COMM,SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \
+ KC_LCTRL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_H, KC_D, KC_T, KC_N, KC_S, SE_MINS, KC_ENT, \
+ KC_LSFT, SE_LTGT,KC_DOT, KC_Q, KC_J, KC_K, KC_B, KC_X, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \
+ KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT),
+ /* Layer 1: Standard ISO layer */
+ [KM_QWERTY] = KEYMAP( \
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AO, SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \
+ KC_LCTRL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SE_OE, SE_AE, KC_ENT, \
+ KC_LSFT, SE_LTGT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, SE_MINS, KC_RSFT, KC_UP, \
+ KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT),
+ /* Layer 2: Media layer */
+ [KM_MEDIA] = KEYMAP( \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_MUTE,_______,KC_VOLD, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \
+ _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT),
+ /* Layer 3: Programming layer */
+ [KM_HAXHAX] = KEYMAP( \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,SE_LCBR,SE_PIPE,SE_RCBR,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,SE_LBRC,SE_BSLS,SE_RBRC,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \
+ _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA),
+ [1] = ACTION_LAYER_TOGGLE(KM_QWERTY)
+};
+
+void matrix_scan_user(void)
+{
+ uint8_t layer = biton32(layer_state);
+ switch (layer) {
+ case KM_BLOWRAK:
+ ph_caps_led_on();
+ ph_sclk_led_off();
+ break;
+ case KM_QWERTY:
+ ph_sclk_led_on();
+ ph_caps_led_off();
+ break;
+ }
+}
+
+/* Mixes in KM_HAXHAX via RALT modifier without shadowing the RALT key combinations. */
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ uint8_t modifiers = get_mods();
+ if (modifiers & MOD_BIT(KC_RALT) && record->event.pressed) {
+ uint16_t kc = keymap_key_to_keycode(KM_HAXHAX, record->event.key);
+ if (kc != KC_TRNS) {
+ register_code(kc);
+ unregister_code(kc);
+ return false;
+ }
+ }
+ return true;
+}
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* overridden settings: */
+
+#undef PRODUCT
+#define PRODUCT Pegasus Hoof Citadel
+
+#endif
--- /dev/null
+/* Copyright 2018 Daniel Rose <droseger@protonmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "pegasushoof.h"
+
+/* Allow shortcuts for combos like RALT(KC_RBRC) that don't take up more than 7 characters: */
+#define G(kc) RALT(KC_##kc)
+#define A(kc) LALT(KC_##kc)
+#define C(kc) LCTL(KC_##kc)
+#undef S /* Original shortcut (quantum_keycodes.h) takes full-sized keycodes: too long! */
+#define S(kc) LSFT(KC_##kc)
+#define CTALDEL LCTL(LALT(KC_DEL))
+
+enum layers {
+ DEF,
+ FUN,
+ RES,
+};
+
+enum tap_dance {
+ AF4,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Layer 0: default layer (ISO-DE)
+ * .----. .-------------------. .-------------------. .-------------------. .--------------.
+ * |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:|
+ * | | | | | | | | | | | | | | | | | |SyRq| |A+F4|
+ * '----' '-------------------' '-------------------' '-------------------' '--------------'
+ * .------------------------------------------------------------------------. .--------------.
+ * |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp|
+ * |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | |
+ * |------------------------------------------------------------------------| |--------------|
+ * |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn|
+ * | | | | €| | | | | | | | |+ ~| n | | | | |
+ * |------------------------------------------------------------------\ t | '--------------'
+ * |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e |
+ * |Layer 2| | | | | | | | | | | |# | r |
+ * |------------------------------------------------------------------------| .----.
+ * |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up |
+ * | |< ¦| | | | | | | µ|, |. |- | | | |
+ * |------------------------------------------------------------------------| .--------------.
+ * |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ|
+ * | | | | | | |Lay 2| | | | | |
+ * '------------------------------------------------------------------------' '--------------'
+ * NUHS = true position of KC_NUHS
+ */
+[DEF] = KEYMAP( \
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,TD(AF4), \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_NUHS, KC_DEL, KC_END, KC_PGDN, \
+ MO(FUN),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,/*NUHS*/KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_LALT,MO(FUN),KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT),
+
+ /* Layer 1: function layer
+ * .----. .-------------------. .-------------------. .-------------------. .--------------.
+ * |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus|
+ * |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea|
+ * '----' '-------------------' '-------------------' '-------------------' '--------------'
+ * .------------------------------------------------------------------------. .--------------.
+ * | | | | | | | | | | | | | | | | | |Mou:|
+ * | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp|
+ * |------------------------------------------------------------------------| |--------------|
+ * | | | | | | | | | | | | |~ | | | | |Mou:|
+ * | | | | | | | | | | | | | | | | | |WhDn|
+ * |------------------------------------------------------------------\ | '--------------'
+ * |CapsLck|Mou:|Mou:| | | | | | | | | | | |
+ * | |Fast|Slow| | | | | | | | | | | |
+ * |------------------------------------------------------------------------| .----.
+ * | | | | | | | | |µ | | | | | |Mou:|
+ * | | | | | | | | | | | | | | |Up |
+ * |------------------------------------------------------------------------| .--------------.
+ * |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:|
+ * |Bttn2|Bttn1| | | | | | | |Left|Down|Righ|
+ * '------------------------------------------------------------------------' '--------------'
+ *
+ */
+[FUN] = KEYMAP( \
+ CTALDEL, KC_MYCM,KC_WHOM,KC_CALC,KC_MSEL,KC_MPRV,KC_MNXT,KC_MPLY,KC_MSTP,KC_MUTE,KC_VOLD,KC_VOLU,MO(RES), _______,KC_SLCK,KC_PAUS, \
+ _______,_______,_______,_______,_______,_______,_______,G(7), G(8), G(9), G(0), G(MINS),_______,_______, _______,_______,KC_WH_U, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,G(RBRC),_______, _______,_______,KC_WH_D, \
+ KC_CAPS,KC_ACL2,KC_ACL0,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,G(M), _______,_______,_______, _______, KC_MS_U, \
+ KC_BTN2,KC_BTN1,_______, _______, _______,KC_RGUI,KC_APP ,_______, KC_MS_L,KC_MS_D,KC_MS_R),
+
+
+/* Layer 3: Reset layer (prevents accidental resets) */
+[RES] = KEYMAP( \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \
+ _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______),
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+ /* Tap once: nothing. Tap twice: Alt+F4 */
+ [AF4] = ACTION_TAP_DANCE_DOUBLE(XXXXXXX,A(F4)),
+};
+
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ ph_caps_led_on();
+ } else {
+ ph_caps_led_off();
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+ ph_sclk_led_on();
+ } else {
+ ph_sclk_led_off();
+ }
+}
--- /dev/null
+# Citadel keymap for pegasushoof
+
+Designed for ISO-DE and similar ISO layouts.
+
+The central idea of this keymap is to avoid unergonomic key combos that force the user to either press
+multiple keys with one hand or to use the left hand for right-sided keys. For instance, ISO-DE users
+have to press `AltGr`+`7` to type _{_. The keymap allows ergonomic access to the right-sided keys of the
+German AltGr-layer by turning `Caps Lock` into a hybrid Fn/AltGr-key. It can easily be adapted for other
+ISO layouts.
+
+The _Function_ layer also offers mouse emulation and function/media keys in the F-Row.
+
+`Pause/Break` is used as a safe _close key_: A _single tap_ does nothing, a _double tap_ executes ALT+F4.
+
+Named after the homonymous space station from _Mass Effect_. Made by [Daniel Rose](https://github.com/droseger/).
+
+## [1] Layers
+
+### Layer 1 (Default)
+ .----. .-------------------. .-------------------. .-------------------. .--------------.
+ |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:|
+ | | | | | | | | | | | | | | | | | |SyRq| |A+F4|
+ '----' '-------------------' '-------------------' '-------------------' '--------------'
+ .------------------------------------------------------------------------. .--------------.
+ |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp|
+ |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | |
+ |------------------------------------------------------------------------| |--------------|
+ |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn|
+ | | | | €| | | | | | | | |+ ~| n | | | | |
+ |------------------------------------------------------------------\ t | '--------------'
+ |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e |
+ |Layer 2| | | | | | | | | | | |# | r |
+ |------------------------------------------------------------------------| .----.
+ |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up |
+ | |< ¦| | | | | | | µ|, |. |- | | | |
+ |------------------------------------------------------------------------| .--------------.
+ |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ|
+ | | | | | | |Lay 2| | | | | |
+ '------------------------------------------------------------------------' '--------------'
+
+### Layer 2 (Function)
+ .----. .-------------------. .-------------------. .-------------------. .--------------.
+ |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus|
+ |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea|
+ '----' '-------------------' '-------------------' '-------------------' '--------------'
+ .------------------------------------------------------------------------. .--------------.
+ | | | | | | | | | | | | | | | | | |Mou:|
+ | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp|
+ |------------------------------------------------------------------------| |--------------|
+ | | | | | | | | | | | | |~ | | | | |Mou:|
+ | | | | | | | | | | | | | | | | | |WhDn|
+ |------------------------------------------------------------------\ | '--------------'
+ |CapsLck|Mou:|Mou:| | | | | | | | | | | |
+ | |Fast|Slow| | | | | | | | | | | |
+ |------------------------------------------------------------------------| .----.
+ | | | | | | | | |µ | | | | | |Mou:|
+ | | | | | | | | | | | | | | |Up |
+ |------------------------------------------------------------------------| .--------------.
+ |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:|
+ |Bttn2|Bttn1| | | | | | | |Left|Down|Righ|
+ '------------------------------------------------------------------------' '--------------'
+
+Layer 3 exists solely to prevent users from accidentally activating boot mode: `R` is redefined
+as `RESET` key [3].
+
+## [2] How to build and install
+1) Prerequisite: install the necessary [build tools](https://docs.qmk.fm/#/getting_started_build_tools)
+such as [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer).
+ - You might need to [add udev rules](https://docs.qmk.fm/#/faq_build?id=can39t-program-on-linux) under Linux.
+2) To test if the keymap compiles, simply run `make pegasushoof:citadel`
+3) Enter the `qmk_firmware` root directory and run `make pegasushoof:citadel:dfu`
+4) Reset controller to _Boot mode_ by pressing the `RESET` key or by using a magnet.
+
+## [3] How to access Boot mode after install
+Press `Fn+F12+R`
--- /dev/null
+# Build Options
+# change to "no" to disable the options
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+TAP_DANCE_ENABLE = yes # see https://docs.qmk.fm/#/feature_tap_dance (+1000)
+
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "pegasushoof.h"
+
+#define _______ KC_TRNS
+
+#define KM_QWERTY 0
+#define KM_MEDIA 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Standard ISO layer */
+ [KM_QWERTY] = KEYMAP( \
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CLCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN0, KC_LEFT,KC_DOWN,KC_RGHT),
+ /* Layer 1: Function layer */
+ [KM_MEDIA] = KEYMAP( \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLD, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \
+ _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA)
+};
+
+void led_set_user(uint8_t usb_led) {
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ ph_caps_led_on();
+ } else {
+ ph_caps_led_off();
+ }
+
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+ ph_sclk_led_on();
+ } else {
+ ph_sclk_led_off();
+ }
+}
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+static uint8_t debouncing = DEBOUNCING_DELAY;
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void select_row(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ /* Column output pins */
+ DDRD |= 0b01111011;
+ /* Row input pins */
+ DDRC &= ~0b10000000;
+ DDRB &= ~0b01111111;
+ PORTC |= 0b10000000;
+ PORTB |= 0b01111111;
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_row(col);
+ wait_us(30);
+ matrix_row_t rows = read_cols();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = rows & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= (matrix_row_t) 1 << col;
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ wait_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ matrix_scan_quantum();
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing)
+ return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return matrix[row] & 1 << col;
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+static matrix_row_t read_cols(void)
+{
+ return
+ (PINB & (1 << 5) ? 0 : 1 << 0) |
+ (PINC & (1 << 7) ? 0 : 1 << 1) |
+ (PINB & (1 << 4) ? 0 : 1 << 2) |
+ (PINB & (1 << 6) ? 0 : 1 << 3) |
+ (PINB & (1 << 1) ? 0 : 1 << 4) |
+ (PINB & (1 << 0) ? 0 : 1 << 5) |
+ (PINB & (1 << 3) ? 0 : 1 << 6) |
+ (PINB & (1 << 2) ? 0 : 1 << 7);
+}
+
+static void select_row(uint8_t col)
+{
+ switch (col) {
+ case 0:
+ PORTD = (PORTD & ~0b01111011) | 0b00110011;
+ break;
+ case 1:
+ PORTD = (PORTD & ~0b01111011) | 0b01110000;
+ break;
+ case 2:
+ PORTD = (PORTD & ~0b01111011) | 0b00010011;
+ break;
+ case 3:
+ PORTD = (PORTD & ~0b01111011) | 0b01101000;
+ break;
+ case 4:
+ PORTD = (PORTD & ~0b01111011) | 0b00001011;
+ break;
+ case 5:
+ PORTD = (PORTD & ~0b01111011) | 0b00111011;
+ break;
+ case 6:
+ PORTD = (PORTD & ~0b01111011) | 0b01111000;
+ break;
+ case 7:
+ PORTD = (PORTD & ~0b01111011) | 0b01100001;
+ break;
+ case 8:
+ PORTD = (PORTD & ~0b01111011) | 0b01101001;
+ break;
+ case 9:
+ PORTD = (PORTD & ~0b01111011) | 0b01110001;
+ break;
+ case 10:
+ PORTD = (PORTD & ~0b01111011) | 0b01101010;
+ break;
+ case 11:
+ PORTD = (PORTD & ~0b01111011) | 0b01100010;
+ break;
+ case 12:
+ PORTD = (PORTD & ~0b01111011) | 0b01111001;
+ break;
+ case 13:
+ PORTD = (PORTD & ~0b01111011) | 0b01100000;
+ break;
+ case 14:
+ PORTD = (PORTD & ~0b01111011) | 0b01000011;
+ break;
+ case 15:
+ PORTD = (PORTD & ~0b01111011) | 0b00011011;
+ break;
+ case 16:
+ PORTD = (PORTD & ~0b01111011) | 0b00100011;
+ break;
+ case 17:
+ PORTD = (PORTD & ~0b01111011) | 0b00101011;
+ break;
+ }
+}
--- /dev/null
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "pegasushoof.h"
+
+
+extern inline void ph_caps_led_on(void);
+extern inline void ph_caps_led_off(void);
+
+extern inline void ph_sclk_led_on(void);
+extern inline void ph_sclk_led_off(void);
+
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+};
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+bool process_action_user(keyrecord_t *record) {
+ return true;
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+}
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+bool process_action_kb(keyrecord_t *record) {
+ return process_action_user(record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ led_set_user(usb_led);
+}
--- /dev/null
+/*
+Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef PEGASUSHOOF_H
+#define PEGASUSHOOF_H
+
+#include "matrix.h"
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define KEYMAP( \
+ KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
+ KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
+ KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
+ KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
+ KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
+ KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0 \
+ ) { /* 00-A 01-B 02-C 03-D 04-E 05-F 06-G 07-H 08-I 09-J 10-K 11-L 12-M 13-N 14-O 15-P 16-Q 17-R */ \
+ /* 0 */ { ___ , ___ , KC0 , ___ , ___ , KF0 , ___ , ___ , ___ , KJ0 , KK0 , ___ , KM0 , KN0 , KO0 , ___ , KQ0 , KR0 }, \
+ /* 1 */ { ___ , ___ , ___ , ___ , ___ , ___ , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , KM1 , ___ , KO1 , KP1 , ___ , ___ }, \
+ /* 2 */ { ___ , KB2 , ___ , KD2 , ___ , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , KM2 , ___ , KO2 , ___ , ___ , ___ }, \
+ /* 3 */ { KA3 , KB3 , ___ , ___ , ___ , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , ___ , KO3 , ___ , ___ , ___ }, \
+ /* 4 */ { ___ , ___ , KC4 , ___ , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , KM4 , ___ , KO4 , KP4 , KQ4 , KR4 }, \
+ /* 5 */ { ___ , ___ , KC5 , ___ , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , KM5 , KN5 , KO5 , KP5 , ___ , ___ }, \
+ /* 6 */ { ___ , ___ , KC6 , ___ , ___ , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , KL6 , ___ , KN6 , KO6 , ___ , KQ6 , ___ }, \
+ /* 7 */ { ___ , ___ , ___ , ___ , ___ , KF7 , KG7 , KH7 , KI7 , KJ7 , KK7 , KL7 , KM7 , KN7 , ___ , KP7 , ___ , ___ }, \
+ }
+
+inline void ph_caps_led_on(void) { DDRC |= (1<<6); PORTC &= ~(1<<6); }
+inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
+
+inline void ph_sclk_led_on(void) { DDRC |= (1<<5); PORTC &= ~(1<<5); }
+inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); }
+
+
+#endif
--- /dev/null
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+
+
+CUSTOM_MATRIX = yes
+SRC = matrix.c
--- /dev/null
+# Bathroom Epiphanies
+
+bpiphany is the owner and designer of [Bathroom Epiphanies](http://bathroomepiphanies.com/).
+
+He is based in Sweden and creates several controller boards as a swappable component for some off the shelf keyboards.
+
--- /dev/null
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Bathroom Epiphanies
+#define PRODUCT tiger_lily
+#define DESCRIPTION Tiger Lily controller for the Filco Majestouch 2
+
+/*
+ * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies
+ * Ported from the Bathroom Epiphanies TMK Firmware:
+ * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers
+ *
+ */
+
+/* key matrix size */
+#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic
+#define MATRIX_COLS 18 // ColA - ColR in the schematic
+
+/*
+ * Keyboard Matrix Assignments
+ */
+#define UNUSED_PINS { B0, C4, D3 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "tiger_lily",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 22.5,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
+ },
+ "LAYOUT_fullsize_ansi": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
+ }
+ }
+}
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
+};
\ No newline at end of file
--- /dev/null
+# The default keymap for tiger_lily
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_fullsize_ansi(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
+};
\ No newline at end of file
--- /dev/null
+# default_ansi
+
+A standard fullsize ANSI-layout keymap for Tiger Lily-powered keyboards.
--- /dev/null
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
--- /dev/null
+/*
+ Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+static matrix_row_t scan_col(void) {
+ return (
+ (PINC&(1<<2) ? 0 : ((matrix_row_t)1<<0)) | \
+ (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<1)) | \
+ (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | \
+ (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<3)) | \
+ (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | \
+ (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<5)) | \
+ (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<6)) | \
+ (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<7))
+ );
+}
+
+static void select_col(uint8_t col) {
+ switch (col) {
+ case 0: PORTD = (PORTD & ~0b01110111) | 0b01110110; break; \
+ case 1: PORTD = (PORTD & ~0b01110111) | 0b01100001; break; \
+ case 2: PORTD = (PORTD & ~0b01110111) | 0b01100101; break; \
+ case 3: PORTD = (PORTD & ~0b01110111) | 0b00000011; break; \
+ case 4: PORTD = (PORTD & ~0b01110111) | 0b00000111; break; \
+ case 5: PORTD = (PORTD & ~0b01110111) | 0b00010011; break; \
+ case 6: PORTD = (PORTD & ~0b01110111) | 0b00010111; break; \
+ case 7: PORTD = (PORTD & ~0b01110111) | 0b00100011; break; \
+ case 8: PORTD = (PORTD & ~0b01110111) | 0b00100111; break; \
+ case 9: PORTD = (PORTD & ~0b01110111) | 0b00110011; break; \
+ case 10: PORTD = (PORTD & ~0b01110111) | 0b01110010; break; \
+ case 11: PORTD = (PORTD & ~0b01110111) | 0b01100110; break; \
+ case 12: PORTD = (PORTD & ~0b01110111) | 0b01110000; break; \
+ case 13: PORTD = (PORTD & ~0b01110111) | 0b01100100; break; \
+ case 14: PORTD = (PORTD & ~0b01110111) | 0b01100000; break; \
+ case 15: PORTD = (PORTD & ~0b01110111) | 0b01000111; break; \
+ case 16: PORTD = (PORTD & ~0b01110111) | 0b01000011; break; \
+ case 17: PORTD = (PORTD & ~0b01110111) | 0b00110111; break;
+ }
+}
+
+void matrix_init(void) {
+ /* Column output pins */ \
+ DDRD |= 0b01110111; \
+ /* Row input pins */ \
+ DDRC &= ~0b10000100; \
+ DDRB &= ~0b01111110; \
+ PORTC |= 0b10000100; \
+ PORTB |= 0b01111110;
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i] = 0;
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ matrix_row_t col_scan = scan_col();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = col_scan & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing)
+ _delay_ms(1);
+ else
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i];
+ }
+
+ matrix_scan_quantum();
+ return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+ #ifndef NO_PRINT
+ print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix_row_t matrix_row = matrix_get_row(row);
+ xprintf("%02X: ", row);
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ bool curr_bit = matrix_row & (1<<col);
+ xprintf("%c", curr_bit ? '*' : '.');
+ }
+ print("\n");
+ }
+ #endif
+}
+
+uint8_t matrix_key_count(void) {
+ uint8_t count = 0;
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++)
+ count += bitpop32(matrix[row]);
+ return count;
+}
--- /dev/null
+tiger_lily
+==========
+
+This is the firmware for Rev. 20161114 of the Tiger Lily controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Filco Majestouch 2 104 key](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1819). Bathroom Epiphanies has advised that the source is also compatible with the Black Petal controller, however I do not own an example to test against.
+
+The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers).
+
+Keyboard Maintainer: QMK Community
+Hardware Supported: Tiger Lily
+Hardware Availability: https://geekhack.org/index.php?topic=46700.0
+
+Make example for this keyboard (after setting up your build environment):
+
+ make bpiphany/tiger_lily:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI controls
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
+
+LAYOUTS = fullsize_ansi
--- /dev/null
+#include "tiger_lily.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ DDRB |= (1<<7);
+ DDRC |= (1<<5) | (1<<6);
+
+ print_dec(usb_led);
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ PORTC &= ~(1<<5);
+ else
+ PORTC |= (1<<5);
+
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ PORTB &= ~(1<<7);
+ else
+ PORTB |= (1<<7);
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ PORTC &= ~(1<<6);
+ else
+ PORTC |= (1<<6);
+
+ led_set_user(usb_led);
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+__attribute__ ((weak))
+void led_set_user(uint8_t usb_led) {
+}
\ No newline at end of file
--- /dev/null
+#ifndef TIGER_LILY_H
+#define TIGER_LILY_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+
+/*
+ Matrix col/row mapping
+
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
+ `----' `-------------------' `-------------------' `-------------------' `--------------'
+ ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+ | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
+ |-------------------------------------------------------------------------| |--------------| |-------------------|
+ | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
+ |-------------------------------------------------------------------------| '--------------' |-------------- |
+ | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
+ |-------------------------------------------------------------------------| ,----. |-------------------|
+ | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
+ |-------------------------------------------------------------------------| ,--------------. |-------------- |
+ | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
+ `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+#define LAYOUT( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
+ KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \
+/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \
+/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
+/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \
+/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \
+/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
+}
+
+#define LAYOUT_fullsize_ansi( \
+ KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
+ KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
+ KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
+ KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
+ KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
+ KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \
+/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \
+/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
+/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \
+/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KC_NO, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \
+/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
+}
+
+#endif
--- /dev/null
+/*
+Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x1337
+#define DEVICE_VER 0x0001
+#define MANUFACTURER BathroomEpiphanies
+#define PRODUCT Unloved Bastard
+#define DESCRIPTION Unloved Bastard controller for CM Masterkeys S
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif
--- /dev/null
+{
+ "keyboard_name": "unloved_bastard",
+ "url": "",
+ "maintainer": "qmk",
+ "bootloader": "",
+ "width": 18.25,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+ },
+ "LAYOUT_tkl_ansi": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for unloved_bastard
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// place overrides here
+
+#endif
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_tkl_ansi(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
+ KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# default_ansi
+
+A standard tenkeyless ANSI-layout keymap for Unloved Bastard-powered keyboards.
--- /dev/null
+/*
+ Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
+ Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t scan_col(void) {
+ return (
+ (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
+ (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<1)) |
+ (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<2)) |
+ (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<3)) |
+ (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<4)) |
+ (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<5)) |
+ (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<6)) |
+ (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<7))
+ );
+}
+
+static void select_col(uint8_t col) {
+ switch (col) {
+ case 0: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
+ case 1: PORTD = (PORTD & ~0b00111111) | 0b00100011; break;
+ case 2: PORTD = (PORTD & ~0b00111111) | 0b00010111; break;
+ case 3: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
+ case 4: PORTD = (PORTD & ~0b00111111) | 0b00010011; break;
+ case 5: PORTD = (PORTD & ~0b00111111) | 0b00011011; break;
+ case 6: PORTD = (PORTD & ~0b00111111) | 0b00110100; break;
+ case 7: PORTD = (PORTD & ~0b00111111) | 0b00111010; break;
+ case 8: PORTD = (PORTD & ~0b00111111) | 0b00111000; break;
+ case 9: PORTD = (PORTD & ~0b00111111) | 0b00111100; break;
+ case 10: PORTD = (PORTD & ~0b00111111) | 0b00110010; break;
+ case 11: PORTD = (PORTD & ~0b00111111) | 0b00011111; break;
+ case 12: PORTD = (PORTD & ~0b00111111) | 0b00001111; break;
+ case 13: PORTD = (PORTD & ~0b00111111) | 0b00100111; break;
+ case 14: PORTD = (PORTD & ~0b00111111) | 0b00000111; break;
+ case 15: PORTD = (PORTD & ~0b00111111) | 0b00110110; break;
+ case 16: PORTD = (PORTD & ~0b00111111) | 0b00001011; break;
+ case 17: PORTD = (PORTD & ~0b00111111) | 0b00000011; break;
+ }
+}
+
+void matrix_init(void) {
+ /* Row output pins */
+ DDRD |= 0b00111111;
+ /* Column input pins */
+ DDRC &= ~0b10000000;
+ DDRB &= ~0b01111111;
+ PORTC |= 0b10000000;
+ PORTB |= 0b01111111;
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i] = 0;
+
+ matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ matrix_row_t col_scan = scan_col();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = col_scan & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing)
+ _delay_ms(1);
+ else
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++)
+ matrix[i] = matrix_debouncing[i];
+ }
+
+ matrix_scan_quantum();
+ return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+ return matrix[row];
+}
+
+void matrix_print(void) {
+#ifndef NO_PRINT
+ print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ matrix_row_t matrix_row = matrix_get_row(row);
+ xprintf("%02X: ", row);
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ bool curr_bit = matrix_row & (1<<col);
+ xprintf("%c", curr_bit ? '*' : '.');
+ }
+ print("\n");
+ }
+#endif
+}
+
+uint8_t matrix_key_count(void) {
+ uint8_t count = 0;
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++)
+ count += bitpop32(matrix[row]);
+ return count;
+}
--- /dev/null
+# unloved_bastard
+
+
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [Alexander Fougner](https://github.com/fougner)
+Hardware Supported: CoolerMaster Masterkeys S PBT (Not the Pro versions with backlighting etc)
+Hardware Availability: Pretty much anywhere
+
+Make example for this keyboard (after setting up your build environment):
+
+ make bpiphany/unloved_bastard:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
+
+LAYOUTS = tkl_ansi
--- /dev/null
+/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "unloved_bastard.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ led_init_ports();
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+ return process_record_user(keycode, record);
+}
+
+// C5 left
+// C6 middle led
+// B7 right led
+void led_init_ports(void) {
+ DDRB |= (1<<7);
+ DDRC |= (1<<5);
+ DDRC |= (1<<6);
+
+ PORTB |= (1<<7);
+ PORTC |= (1<<5);
+ PORTC |= (1<<6);
+}
+
+
+void led_set_kb(uint8_t usb_led) {
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ PORTC &= ~(1<<5);
+ else
+ PORTC |= (1<<5);
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ PORTB &= ~(1<<7);
+ else
+ PORTB |= (1<<7);
+
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ PORTC &= ~(1<<6);
+ else
+ PORTC |= (1<<6);
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2017 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef UNLOVED_BASTARD_H
+#define UNLOVED_BASTARD_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
+ KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
+ KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
+ KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
+ KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
+ KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \
+/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \
+/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \
+/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \
+/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \
+/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \
+}
+
+#define LAYOUT_tkl_ansi( \
+ KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
+ KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
+ KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
+ KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
+ KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
+ KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \
+) \
+{ \
+/* Columns and rows need to be swapped in the below definition */ \
+/* A B C D E F G H I J K L M N O P Q R */ \
+/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \
+/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \
+/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \
+/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \
+/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \
+/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \
+/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KC_NO, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \
+/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \
+}
+
+#endif
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Bathroom Epiphanies
-#define PRODUCT frosty_flake
-#define DESCRIPTION Frosty Flake controller for the CM Storm Quick Fire Rapid
-
-/*
- * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies
- * Ported from the Bathroom Epiphanies TMK Firmware:
- * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers
- *
- */
-
-/* key matrix size */
-#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic
-#define MATRIX_COLS 18 // ColA - ColR in the schematic
-
-/*
- * Keyboard Matrix Assignments
- */
-#define UNUSED_PINS { B0, C4, D3 }
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-#include "frosty_flake.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- DDRB |= (1<<7);
- DDRC |= (1<<5) | (1<<6);
-
- print_dec(usb_led);
-
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- PORTC &= ~(1<<5);
- else
- PORTC |= (1<<5);
-
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- PORTB &= ~(1<<7);
- else
- PORTB |= (1<<7);
-
- if (usb_led & (1<<USB_LED_SCROLL_LOCK))
- PORTC &= ~(1<<6);
- else
- PORTC |= (1<<6);
-
- led_set_user(usb_led);
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}
\ No newline at end of file
+++ /dev/null
-#ifndef FROSTY_FLAKE_H
-#define FROSTY_FLAKE_H
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-
-/*
- Matrix col/row mapping
-
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
- `----' `-------------------' `-------------------' `-------------------' `--------------'
- ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
- | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
- |-------------------------------------------------------------------------| |--------------| |-------------------|
- | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
- |-------------------------------------------------------------------------| '--------------' |-------------- |
- | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
- |-------------------------------------------------------------------------| ,----. |-------------------|
- | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
- |-------------------------------------------------------------------------| ,--------------. |-------------- |
- | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
- `-------------------------------------------------------------------------' `--------------' `-------------------'
-*/
-#define KEYMAP( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
- KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
-) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/* A B C D E F G H I J K L M N O P Q R */ \
-/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \
-/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \
-/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \
-/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \
-/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
-/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \
-/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \
-/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
-}
-
-/*
- Matrix col/row mapping (TKL)
-
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
- `----' `-------------------' `-------------------' `-------------------' `--------------'
- ,-------------------------------------------------------------------------. ,--------------.
- | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 |
- |-------------------------------------------------------------------------| |--------------|
- | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 |
- |-------------------------------------------------------------------------| '--------------'
- | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 |
- |-------------------------------------------------------------------------| ,----.
- | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 |
- |-------------------------------------------------------------------------| ,--------------.
- | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 |
- `-------------------------------------------------------------------------' `--------------'
-*/
-
-#define KEYMAP_TKL( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \
- KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \
-) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/* A B C D E F G H I J K L M N O P Q R */ \
-/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KC_NO, KR0 }, \
-/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
-/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KC_NO, KC_NO, KC_NO, KN2, KC_NO, KP2, KC_NO, KR2 }, \
-/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KC_NO, KC_NO, KM3, KN3, KC_NO, KC_NO, KC_NO, KR3 }, \
-/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
-/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KR5 }, \
-/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KC_NO, KC_NO, KC_NO, KO6, KC_NO, KC_NO, KR6 }, \
-/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
-}
-
-#define LAYOUT_tkl_ansi( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \
- KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \
-) KEYMAP_TKL( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, \
- KN2, KC_NO, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0 \
-)
-
-#endif
+++ /dev/null
-
-#define TAPPING_TERM 150 //reduce time required to register a held key
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-#include "frosty_flake.h"
-#include "action_layer.h"
-#ifdef AUDIO_ENABLE
- #include "audio.h"
-#endif
-#include "eeconfig.h"
-
-enum QFR_layers {
- _COLEMAK,
- _QWERTY,
- _DVORAK,
- _LOWER,
- _MOUSE
-};
-
-enum QFR_keycodes {
- COLEMAK = SAFE_RANGE,
- QWERTY,
- DVORAK,
- LOWER,
- MOUSE
-};
-
-enum custom_macros {
- R_PIPE,
- R_POINT
-};
-
- const uint16_t PROGMEM fn_actions[] = { //ACTION_LAYER_TAP_TOGGLE requires that number of taps be defined in *config.h* - default set to 5
- [0] = ACTION_LAYER_TAP_KEY(_LOWER, KC_SPC), //Hold for momentary Lower layer, Tap for Space,
- [1] = ACTION_LAYER_MOMENTARY(_MOUSE) //Hold for momentary MOUSE
-
- };
-
-#define SPC_LW FUNC(0)
-#define MSE FUNC(1)
-#define PIPE M(R_PIPE)
-#define POINT M(R_POINT)
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_COLEMAK] = KEYMAP_TKL(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT , \
- KC_LSPO,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_UP, \
- KC_LCTL,KC_LGUI, KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT
- ),
-
-[_QWERTY] = KEYMAP_TKL(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI , KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
- ),
-
-[_DVORAK] = KEYMAP_TKL(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
- KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_BSPC,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_QUOT, KC_ENT, \
- KC_LSFT,KC_NUBS,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, SPC_LW, MSE, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
- ),
-
-[_LOWER] = KEYMAP_TKL(\
- RESET, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, _______, KC_MUTE, KC_VOLD, KC_VOLU, QWERTY, COLEMAK,DVORAK, \
- KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_UNDS, KC_PLUS, KC_BSPC, _______,_______,_______, \
- KC_TAB, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, _______,_______,_______, \
- KC_CAPS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, \
- _______,XXXXXXX,POINT,PIPE, KC_LCBR, KC_LBRC, KC_GRV, KC_PIPE, KC_RBRC, KC_RCBR, _______, _______, _______, _______, \
- _______, _______, _______, _______, KC_RALT, _______, _______, _______, _______,_______,_______ \
- ),
-
-[_MOUSE] = KEYMAP_TKL(\
- _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,_______,_______, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, _______,_______,_______, \
- KC_TAB, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX, KC_BTN3, KC_BTN4, KC_BTN5, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, _______,_______,_______, \
- KC_BSPC, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, _______, \
- _______,XXXXXXX,PIPE,POINT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, \
- _______, _______, _______, KC_ACL2, MSE, _______, _______, _______, _______,_______,_______ \
- )
-};
-
-// Macros to send R pointer & dplyr pipe
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch(id) {
- case R_POINT:
- if (record->event.pressed) { // pointer
- SEND_STRING("<- ");
-// return MACRO(D(LSFT), T(COMM), U(LSFT), T(MINS), END);
- }
- break;
- case R_PIPE:
- if (record->event.pressed) { // dplyr pipe
- SEND_STRING("%>% ");
-// return MACRO(D(LSFT), T(5), T(DOT), T(5), U(LSFT), END);
- }
- break;
- }
- return MACRO_NONE;
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case QWERTY:
- if (record->event.pressed) {
- set_single_persistent_default_layer(_QWERTY);
- }
- return false;
- break;
- case COLEMAK:
- if (record->event.pressed) {
- set_single_persistent_default_layer(_COLEMAK);
- }
- return false;
- break;
- case DVORAK:
- if (record->event.pressed) {
- set_single_persistent_default_layer(_DVORAK);
- }
- return false;
- break;
- }
- return true;
-}
\ No newline at end of file
+++ /dev/null
-
-# TKL keymap for frosty\_flake
-```
-make frosty_flake:QFR_JM
-
-dfu-programmer atmega32u2 erase
-dfu-programmer atmega32u2 flash frosty_flake_QFR_JM.hex
-dfu-programmer atmega32u2 start
-```
-
-##Layers
-```
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk|
- '----' '-------------------' '-------------------' '-------------------' '--------------'
- ,-------------------------------------------------------------------------. ,--------------.
- | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bspc | | Ins|Home|PgUp|
- |-------------------------------------------------------------------------| |--------------|
- | Tab | Q | W | F | P | G | J | L | U | Y | ; | [ | ] | \ | | Del|End |PgDn|
- |-------------------------------------------------------------------------| '--------------'
- | Bspc | A | R | S | T | D | H | N | E | I | O | ' | Enter |
- |-------------------------------------------------------------------------| ,----.
- | LSPO | Z | X | C | V | B | K | M | , | . | / | RSPC | | Up |
- |-------------------------------------------------------------------------| ,--------------.
- |Ctrl|LGUI|LAlt| Space/Lower |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght|
- '-------------------------------------------------------------------------' '--------------'
-
-```
-### Base Layer - Colemak
-The base layout is Colemak by default, but this can be changed to QWERTY via the *LOWER* layer.
-* I've implemented COLEMAK = SAFE\_RANGE when enumerating the custom\_keycodes, but I don't actually know what this does...
-
-* Space cadet is implemented in the shift keys (hold for shift, tap for respective parentheses)
-
-#### Layer Shifting
-* The spacebar is a **TAP_KEY** macro - Hold for momentary *LOWER* layer, Tap for Space.
-* The Right hand ALT key is a **TAP_TOGGLE** macro for the *MOUSE* layer (RAlt is accessible through LOWER, if you want...)
-
-### LOWER
-```
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- |ESC | | F1 | F2 | F3 | F4 | |>/|||Stop| << | >> | | F9 |MUTE|Vol-|Vol+| |QWTY|CLMK|PsBk|
- '----' '-------------------' '-------------------' '-------------------' '--------------'
- ,-------------------------------------------------------------------------. ,--------------.
- | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | _ | + | Bspc | | Ins|Home|PgUp|
- |-------------------------------------------------------------------------| |--------------|
- | Tab |PgUp|Home| Up | End| | | | | | | { | } | | | | Del|End |PgDn|
- |-------------------------------------------------------------------------| '--------------'
- | Bckspc|PgDn|Left|Down|Rght| | | | | | | ' | Enter |
- |-------------------------------------------------------------------------| ,----.
- | LSPO | <- |%>% | { | [ | ` | | | ] | } | . | / | RSPC | | Up |
- |-------------------------------------------------------------------------| ,--------------.
- |Ctrl|LGUI|LAlt| |RAlt|RGUI|Menu|Ctrl| |Left|Down|Rght|
- '-------------------------------------------------------------------------' '--------------'
-```
-The *LOWER* layer contains a navigation cluster on the left hand. This layer is momentary when the spacebar or LOWER (RAlt) key is held and toggled on/off when the LOWER key is tapped.
-
-* The Navigation cluster is offset to the right compared to the traditional **WASD** nav cluster. With this implementation, you don't need to move your hand from the home position when navigating. Page Up & Down keys are found on the far left of the cluster.
-
-* All unused (blank on the above keymap) keys are locked out using the XXXXXXX filler (KC\_NO), all modifiers (edge |\_| keys \[except 0, \. & Fn\] on the above keymap) and the ZXCV cluster are transparent (\_\_\_\_\_\_\_) to the Base layer.
-
-* The base layer can be switched to QWERTY or COLEMAK by pressing the Pause Break or Scroll Lock keys respectively
-
-### MOUSE
-```
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- |ESC | | F1 | F2 | F3 | F4 | | F5 | F6 | F7 | F8 | | F9 |F10 |F11 |F12 | |PrSc|ScLk|PsBk|
- '----' '-------------------' '-------------------' '-------------------' '--------------'
- ,-------------------------------------------------------------------------. ,--------------.
- | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Del | | Ins|Home|PgUp|
- |-------------------------------------------------------------------------| |--------------|
- | Tab | WhU| WhL| MsU| WhR| | | M3 | M4 | M5 | | [ | ] | \ | | Del|End |PgDn|
- |-------------------------------------------------------------------------| '--------------'
- | BSPC | WhD| MsL| MsD| MsR| | |LClk |RClk | | | ' | Enter |
- |-------------------------------------------------------------------------| ,----.
- | LSPO | Z | X | C | V | | | | , | . | / | RSPC | | Up |
- |-------------------------------------------------------------------------| ,--------------.
- |Ctrl|LGUI|LAlt| Accel ++ |MSE |RGUI|Menu|Ctrl| |Left|Down|Rght|
- '-------------------------------------------------------------------------' '--------------'
-```
-The *MOUSE* layer contains keys replicating functions found on the mouse.
-
-* The navigation cluster (Up, Down, Left, Right) is a replication of the Navigation cluster on the *LOWER* layer. The scroll keys are analagous to the Page Up & Downkeys.
-* The primary click (right & left) buttons are on the right home row (index & middle fingers)
-* Secondary click buttons are above the standard keys (M3/Wheel click, M4, M5) but I do not use this function.
-
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-#include "frosty_flake.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
-};
\ No newline at end of file
+++ /dev/null
-# The default keymap for frosty_flake
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define TAPPING_TERM 200
-#define LEADER_TIMEOUT 800
-
-#define DISABLE_SPACE_CADET_ROLLOVER
-
-#define UNICODE_TYPE_DELAY 0
-
-#define LSPO_KEY KC_9
-#define RSPC_KEY KC_0
-
-#define MOUSEKEY_INTERVAL 20
-#define MOUSEKEY_DELAY 0
-#define MOUSEKEY_TIME_TO_MAX 60
-#define MOUSEKEY_MAX_SPEED 7
-#define MOUSEKEY_WHEEL_DELAY 0
-// place overrides here
-
-#endif
+++ /dev/null
-#include "frosty_flake.h"
-#include "action_layer.h"
-#include "eeconfig.h"
-#include "process_unicode.h"
-#include "process_unicodemap.h"
-#include "quantum.h"
-
-#define _______ KC_TRNS
-#define MAXEMOJITAPS 80
-
-
-//declarations for tap dancing emojis
-void register_hex32(uint32_t hex);
-void cycleEmojis(qk_tap_dance_state_t *state, void *user_data);
-void cycleAnimals(qk_tap_dance_state_t *state, void *user_data);
-void cycleFoods(qk_tap_dance_state_t *state, void *user_data);
-void cycleEtc(qk_tap_dance_state_t *state, void *user_data);
-void cycleAll(qk_tap_dance_state_t *state, void *user_data);
-
-void tap(uint16_t keycode){
- register_code(keycode);
- unregister_code(keycode);
-};
-
-//Tap Dance Declarations
-enum taps{
- TD_CTCPS = 0,
- EMOJIS,
- ANIMAL,
- HAND,
- MEMES,
- COPA,
- ALLS
-};
-
-enum unicode_name {
- EMOTIS = 1,//80, //1F60x - 1F64x
- ANIMALS, //64, //1F40x - 1F43x
- SYMBOLS,// = 45, //1F300 - 1F32C
- FOODS,// = 87 , //1F32D -
- ETC,// = 192, //1F44x -1F4Fx
- VEHICLES,// = 83, //1F68x - 1F6Dx
- SUPPLEMENT,// = 32, //1F91x-1F92x
- ALCHEMY,// = 116 //1F70x - 1F773
-
-};
-
-enum my_macros {
- NEWDESK = 0,
- LEFTDESK,
- RIGHTDESK,
- CLOSEDESK
-};
-
-
-// Tap Dance Definitions
-qk_tap_dance_action_t tap_dance_actions[] = {
- // Tap once for CTRL, twice for Caps Lock
- [TD_CTCPS] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_CAPS),
- [COPA] = ACTION_TAP_DANCE_DOUBLE(LCTL(KC_C), LCTL(KC_V)),
- [EMOJIS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEmojis, NULL, NULL, 800),
- [ANIMAL] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAnimals, NULL, NULL, 800),
- //[SYMBOLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSymbols, NULL, NULL, 800),
- [FOODS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleFoods, NULL, NULL, 800),
- [ETC] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleEtc, NULL, NULL, 800),
- //[VEHICLES] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleVehicles, NULL, NULL, 800),
- //[SUPPLEMENT] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleSupplement, NULL, NULL, 800),
- [ALLS] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(cycleAll, NULL, NULL, 800)
-// Other declarations would go here, separated by commas, if you have them
-};
-
-// macros
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch(id) {
- case NEWDESK: // this would trigger when you hit a key mapped as M(0)
- if (record->event.pressed) {
- return MACRO( I(1), D(LGUI), D(LCTL), D(D), U(LGUI), U(LCTL), U(D), END ); // NEW DESKTOP
- }
- break;
- case LEFTDESK: // this would trigger when you hit a key mapped as M(0)
- if (record->event.pressed) {
- return MACRO( I(1), D(LGUI), D(LCTL), D(LEFT), U(LGUI), U(LCTL), U(LEFT), END ); // LEFT DESKTOP
- }
- break;
- case RIGHTDESK: // this would trigger when you hit a key mapped as M(0)
- if (record->event.pressed) {
- return MACRO( I(1), D(LGUI), D(LCTL), D(RGHT), U(LGUI), U(LCTL), U(RGHT), END ); // RIGHT DESKTOP
- }
- break;
- case CLOSEDESK: // this would trigger when you hit a key mapped as M(0)
- if (record->event.pressed) {
- return MACRO( I(1), D(LGUI), D(LCTL), D(F4), U(LGUI), U(LCTL), U(F4), END ); // CLOSE DESKTOP
- }
- break;
- }
- return MACRO_NONE;
-};
-
-
-// emojis in unicode
-const uint32_t PROGMEM unicode_map[] = {
- [EMOTIS] = 0x1F600,
- [ANIMALS] = 0x1F400,
- [SYMBOLS] = 0x1F300,
- [FOODS] = 0x1F32D,
- [ETC] = 0x1F440,
- [VEHICLES] = 0x1F680,
- [SUPPLEMENT] = 0x1F910,
- [ALCHEMY] = 0x1F700
- };
-// Layouts
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSPO,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSPC, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
- TD(TD_CTCPS),KC_LGUI,KC_LALT, KC_SPC, KC_LEAD,KC_RGUI, KC_APP,MO(1) , KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT),
-[1] = KEYMAP(\
- TD(ALLS), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, TD(EMOJIS),TD(ANIMAL),TD(ETC),TD(FOODS), KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, M(0), KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_UP ,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_LCTL, M(1), M(3), M(2), KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_LEFT,KC_RGHT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_DOWN, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \
- KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2),_______ , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT),
-[2] = KEYMAP(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_MPRV,KC_MPLY,KC_MNXT, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_MUTE,KC_VOLD,KC_VOLU, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_LCTL, KC_D, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_MS_U, KC_P1, KC_P2, KC_P3,KC_PENT, \
- KC_BTN1,KC_BTN3,KC_BTN2, KC_SPC, KC_RALT,KC_RGUI, TG(2) , KC_NO , KC_MS_L,KC_MS_D,KC_MS_R, KC_P0,KC_PDOT),
-};
-
-LEADER_EXTERNS();
-
-void matrix_scan_user(void) {
- LEADER_DICTIONARY() {
- leading = false;
- leader_end();
-
- SEQ_TWO_KEYS(KC_A, KC_A) { // select all and copy
- register_code(KC_LCTL);
- tap(KC_A);
- tap(KC_C);
- unregister_code(KC_LCTL);
- }
- }
-}
-
-void matrix_init_user(void) {
- _delay_ms(500);
- set_unicode_input_mode(UC_WINC);
-};
-
-void cycleAll(qk_tap_dance_state_t *state, void *user_data) {
- if(state->count == 1) {
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[EMOTIS]));
- unicode_input_finish();
- }
- else if(state->count <= 1642) {
- tap(KC_BSPC);
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[1])+state->count);
- unicode_input_finish();
- }
-};
-
-
-void cycleEmojis(qk_tap_dance_state_t *state, void *user_data) {
- if(state->count == 1) {
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[EMOTIS]));
- unicode_input_finish();
- }
- else if(state->count <= 80) {
- tap(KC_BSPC);
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[EMOTIS])+state->count);
- unicode_input_finish();
- }
-};
-
-void cycleAnimals(qk_tap_dance_state_t *state, void *user_data) {
- if(state->count == 1) {
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[ANIMALS]));
- unicode_input_finish();
- }
- else if(state->count <= MAXEMOJITAPS) {
- tap(KC_BSPC);
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[ANIMALS])+state->count);
- unicode_input_finish();
- }
-};
-
-void cycleFoods(qk_tap_dance_state_t *state, void *user_data) {
- if(state->count == 1) {
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[FOODS]));
- unicode_input_finish();
- }
- else if(state->count <= 87) {
- tap(KC_BSPC);
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[FOODS])+state->count);
- unicode_input_finish();
- }
-};
-
-
-void cycleEtc(qk_tap_dance_state_t *state, void *user_data) {
- if(state->count == 1) {
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[ETC]));
- unicode_input_finish();
- }
- else if(state->count <= MAXEMOJITAPS) {
- tap(KC_BSPC);
- unicode_input_start();
- register_hex32(pgm_read_dword(&unicode_map[ETC])+state->count);
- unicode_input_finish();
- }
-};
-
+++ /dev/null
-# The Nikchi's keymap for frosty_flake
-
-### FEATURING
--SPACE CADET
--Caps Lock is now LCTRL
--LCTRL is Tap(LCTRL, Caps Lock)
-
-### LEADER KEY - RALT
-COMBOS
--a,a => Select All, Copy
-
-
-
-### FN REBINDS for Windows
-```
- [W] [New Desktop]
-[A][S][D] [Left Desk][Delete Desk][Right Desk]
-
-[Ins][Hom][PUp] [RW][PP][FF]
-[Del][End][PDn] [MU][VD][VU]
-
-Arrows are Mouskeys, left three mods are clicks
-
-```
\ No newline at end of file
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-UNICODEMAP_ENABLE = yes # unicodemap
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE = yes
-LEADER_ENABLE = yes
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-# Tap Dancing to different beats.
-Tap Dance is constrained normally by `TAPPING_TERM` defined in your keyboard's config.h This proves to be challenging to work with when sometimes you just need more time to tap out your dance, or even a different "beat".
-
-
-
-- `ACTION_TAP_DANCE_FN_ADVANCED_TIME(user_fn_on_each_tap, user_fn_on_dance_finished, user_fn_on_dance_reset, tap_specific_tapping_term)` : This works the same as `ACTION_TAP_DANCE_FN_ADVANCED` just with the extra `tap_specific_tapping_term` arguement at the end. This way you can set a specific tap dance to have a longer or shorter tap in between your taps, giving you more, or less, time in between each tap.
-
-
-`tap_specific_tapping_term` should be the same type and range of values that one would put into the `TAPPING_TERM` definition in the config.h file.
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-#include "frosty_flake.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP_TKL(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
-};
+++ /dev/null
-# TKL keymap for frosty_flake
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+++ /dev/null
-/*
- Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-#ifndef DEBOUNCING_DELAY
-# define DEBOUNCING_DELAY 5
-#endif
-static uint8_t debouncing = DEBOUNCING_DELAY;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t scan_col(void) {
- return (
- (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
- (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<1)) |
- (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) |
- (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<3)) |
- (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) |
- (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<5)) |
- (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<6)) |
- (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<7))
- );
-}
-
-static void select_col(uint8_t col) {
- switch (col) {
- case 0: PORTD = (PORTD & ~0b01111011) | 0b00011011; break;
- case 1: PORTD = (PORTD & ~0b01111011) | 0b01000011; break;
- case 2: PORTD = (PORTD & ~0b01111011) | 0b01101010; break;
- case 3: PORTD = (PORTD & ~0b01111011) | 0b01111001; break;
- case 4: PORTD = (PORTD & ~0b01111011) | 0b01100010; break;
- case 5: PORTD = (PORTD & ~0b01111011) | 0b01110001; break;
- case 6: PORTD = (PORTD & ~0b01111011) | 0b01100001; break;
- case 7: PORTD = (PORTD & ~0b01111011) | 0b01110000; break;
- case 8: PORTD = (PORTD & ~0b01111011) | 0b01100000; break;
- case 9: PORTD = (PORTD & ~0b01111011) | 0b01101000; break;
- case 10: PORTD = (PORTD & ~0b01111011) | 0b00101011; break;
- case 11: PORTD = (PORTD & ~0b01111011) | 0b00110011; break;
- case 12: PORTD = (PORTD & ~0b01111011) | 0b00100011; break;
- case 13: PORTD = (PORTD & ~0b01111011) | 0b01111000; break;
- case 14: PORTD = (PORTD & ~0b01111011) | 0b00010011; break;
- case 15: PORTD = (PORTD & ~0b01111011) | 0b01101001; break;
- case 16: PORTD = (PORTD & ~0b01111011) | 0b00001011; break;
- case 17: PORTD = (PORTD & ~0b01111011) | 0b00111011; break;
- }
-}
-
-void matrix_init(void) {
- /* Row output pins */
- DDRD |= 0b01111011;
- /* Column input pins */
- DDRC &= ~0b10000000;
- DDRB &= ~0b01111111;
- PORTC |= 0b10000000;
- PORTB |= 0b01111111;
-
- for (uint8_t i=0; i < MATRIX_ROWS; i++)
- matrix[i] = matrix_debouncing[i] = 0;
-
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void) {
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- select_col(col);
- _delay_us(3);
- matrix_row_t col_scan = scan_col();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
- bool curr_bit = col_scan & (1<<row);
- if (prev_bit != curr_bit) {
- matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
- debouncing = DEBOUNCING_DELAY;
- }
- }
- }
-
- if (debouncing) {
- if (--debouncing)
- _delay_ms(1);
- else
- for (uint8_t i = 0; i < MATRIX_ROWS; i++)
- matrix[i] = matrix_debouncing[i];
- }
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
-#ifndef NO_PRINT
- print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix_row_t matrix_row = matrix_get_row(row);
- xprintf("%02X: ", row);
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- bool curr_bit = matrix_row & (1<<col);
- xprintf("%c", curr_bit ? '*' : '.');
- }
- print("\n");
- }
-#endif
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t row = 0; row < MATRIX_ROWS; row++)
- count += bitpop32(matrix[row]);
- return count;
-}
+++ /dev/null
-# Frosty Flake Controller
-
-This is the firmware for Rev. 20140521 of the Frosty Flake controller
-by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/),
-a replacement controller for the [Cooler Master Quick Fire
-Rapid](http://www.coolermaster.com/peripheral/keyboards/quickfirerapid/).
-
-The code was adapted from the [BathroomEpiphanies TMK
-Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers),
-but has been cleaned up to match the
-[schematic](https://deskthority.net/wiki/File:Frosty_Flake_Schematics.pdf)
-and gone through some minor refactoring for QMK.
-
-## 104 and 87 layout support
-
-Support for both 104 key and 87 key layouts is provided. See the
-keymaps `default` (104) and `tkl` (87) for example layouts.
-
-Keyboard Maintainer: QMK Community
-Hardware Supported: Frosty Flake
-Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html
-
-Make example for this keyboard (after setting up your build environment):
-
-104 key default layout:
-
-```
-make frosty_flake:default
-```
-
-To directly flash the frosty_flake after compiling use
-
-```
-make frosty_flake:default:dfu
-```
-
-87 key tkl layout:
-
-```
-make frosty_flake:tkl:dfu
-```
-
-See [build environment
-setup](https://docs.qmk.fm/build_environment_setup.html) then the
-[make instructions](https://docs.qmk.fm/make_instructions.html) for
-more information.
+++ /dev/null
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u2
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI controls
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c
-
-LAYOUTS = tkl_ansi
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6050
-#define DEVICE_VER 0x0104
-#define MANUFACTURER Costar
-#define PRODUCT Majestouch
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 18
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-//#define MATRIX_ROW_PINS { D0, D5 }
-//#define MATRIX_COL_PINS { F1, F0, B0 }
-//#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "Kitten Paw",
- "url": "",
- "maintainer": "qmk",
- "width": 22.5,
- "height": 6.5,
- "layouts": {
- "LAYOUT": {
- "key_count": 105,
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"KC_NUBS", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
- },
-
- "LAYOUT_fullsize_ansi": {
- "key_count": 104,
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
- }
- }
-}
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-enum layers {
- DEFAULT,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [DEFAULT] = LAYOUT(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
\ No newline at end of file
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#undef MOUSEKEY_MOVE_MAX
-#define MOUSEKEY_MOVE_MAX 127
-#undef MOUSEKEY_WHEEL_MAX
-#define MOUSEKEY_WHEEL_MAX 110
-#undef MOUSEKEY_MOVE_DELTA
-#define MOUSEKEY_MOVE_DELTA 5
-#undef MOUSEKEY_WHEEL_DELTA
-#define MOUSEKEY_WHEEL_DELTA 1
-#undef MOUSEKEY_DELAY
-#define MOUSEKEY_DELAY 50
-#undef MOUSEKEY_INTERVAL
-#define MOUSEKEY_INTERVAL 20
-#undef MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 4
-#undef MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 30
-#undef MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 3
-#undef MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 255
-#undef ONESHOT_TIMEOUT
-#define ONESHOT_TIMEOUT 500
-#undef TAPPING_TOGGLE
-#define TAPPING_TOGGLE 2
-
-#endif
+++ /dev/null
-#include QMK_KEYBOARD_H
-#include "mousekey.h"
-
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-#define C(kc) LCTL(KC_##kc)
-#define RA(kc) RALT(KC_##kc)
-#define KC_SLCT KC_SELECT
-#define MEDAPP LT(MEDIA, KC_APP)
-#undef S
-#define S(kc) LSFT(KC_##kc)
-
-uint8_t current_layer_global = 255;
-
-enum layers {
- DEFAULT,
- PROG1,
- PROG2,
- MEDIA,
- MOUSE1,
- MOUSE2,
- MISC,
-};
-
-enum function_id {
- LSHFT_PAREN,
- RSHFT_PAREN,
- LCTRL_BRACKET,
- RCTRL_BRACKET,
- LALT_CURLY,
- RALT_CURLY,
- CTRL_CLICK
-};
-
-enum macro_id {
- GRV,
- CFLEX
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [DEFAULT] = LAYOUT(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- F(0), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- F(8),KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, F(9), KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
- F(1),KC_LGUI, F(3), LT(MISC, KC_SPC), F(4), F(5), MEDAPP, F(2), KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT),
- /* Layer 1: Programming Layer 1, emulating US l ayout */
- [PROG1] = LAYOUT(\
- KC_ESC,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- M(GRV),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_SLSH, S(0),_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,_______,_______,_______,_______, KC_Z,_______,_______,_______,_______, RA(8), RA(9),RA(MINS), _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,S(COMM),S(BSLS), _______, _______,_______,_______, \
- MO(PROG2),_______, KC_Y,_______,_______,_______,_______,_______,_______,_______,_______, S(7), MO(PROG2), _______, _______,_______,_______,_______, \
- _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______),
- /* Layer 2: programming layer 2
- all keys that are not FN keys are sent as LSFT+key on this layer
- */
- [PROG2] = LAYOUT(\
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- RA(RBRC),_______, RA(Q),KC_BSLS,_______,_______,M(CFLEX), S(6),S(RBRC), S(8), S(9),S(SLSH),KC_RBRC,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, RA(7), RA(0),RA(NUBS), _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, S(DOT), S(2), _______, _______,_______,_______, \
- _______,S(NUBS),_______,_______,_______,_______,_______,_______,_______,KC_NUBS,S(NUBS),S(MINS), _______, _______, _______,_______,_______,_______, \
- _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______),
- /* Layer 3: media layer */
- [MEDIA] = LAYOUT(\
- KC_PWR,KC_SLEP,KC_WAKE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \
- XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_MPRV,KC_MPLY,KC_MNXT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
- XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_VOLD,KC_MUTE,KC_VOLU, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
- XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX, \
- XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, KC_EJCT, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, \
- XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX,_______,XXXXXXX, KC_MRWD,KC_MSTP,KC_MFFD, XXXXXXX,XXXXXXX),
- /* Layer 4: Mouse layer */
- [MOUSE1] = LAYOUT(\
- F(6),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,KC_ACL0,KC_ACL1,KC_ACL2,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,KC_BTN4,KC_WH_D,KC_MS_U,KC_WH_U,_______, C(Z),_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,KC_BTN5,KC_MS_L,KC_MS_D,KC_MS_R, F(7),KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,_______,_______, _______, _______,_______,_______, \
- MO(MOUSE2),_______, C(Y), C(X), C(C), C(V),_______,KC_BTN2,KC_BTN3,C(PGUP),C(PGDN),_______, KC_RSFT, _______, _______,_______,_______,_______, \
- KC_LCTL,_______,KC_LALT, KC_BTN1, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, _______,_______,_______, _______,_______),
- /* Layer 5: Mouse layer 2*/
- [MOUSE2] = LAYOUT(\
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,KC_BTN2,KC_WH_U,KC_BTN3,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,KC_WH_L,KC_WH_D,KC_WH_R,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______, _______, _______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______,_______,_______,_______, \
- _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______, _______,_______),
- /* Layer 6: Misc layer */
- [MISC] = LAYOUT(\
- _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, _______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,KC_SLCT, C(W), KC_UP,_______,_______,_______,_______,KC_BSPC, KC_DEL,_______,_______,_______,_______, _______,_______,_______, _______,_______,_______,_______, \
- _______,_______,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_HOME,KC_PGDN,KC_PGUP,_______,_______,_______, _______, _______,_______,_______, \
- KC_LSFT,_______, C(Y), C(X), C(C), C(V), KC_SPC, KC_END,_______,C(PGUP),C(PGDN),_______, _______, _______, _______,_______,_______,_______, \
- _______,_______,_______, LT(MISC, KC_SPC), _______,_______,_______,_______, _______,_______,_______, _______,_______),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_TAP_TOGGLE(MOUSE1), // tap-toggle mouse layer (4)
- [1] = ACTION_FUNCTION_TAP(LCTRL_BRACKET), // tap to print [
- [2] = ACTION_FUNCTION_TAP(RCTRL_BRACKET), // tap to print ]
- [3] = ACTION_FUNCTION_TAP(LALT_CURLY), // tap to print {
- [4] = ACTION_FUNCTION_TAP(RALT_CURLY), // tap to print }
- [5] = ACTION_LAYER_TAP_TOGGLE(PROG1), // tap-toggle programming layer 1
- [6] = ACTION_LAYER_SET_CLEAR(DEFAULT),
- [7] = ACTION_FUNCTION_TAP(CTRL_CLICK),
- [8] = ACTION_FUNCTION_TAP(LSHFT_PAREN), // tap to print (
- [9] = ACTION_FUNCTION_TAP(RSHFT_PAREN), // tap to print )
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case GRV: // macro to print accent grave
- return (record->event.pressed ?
- MACRO( D(LSFT), T(EQL), U(RALT), T(SPC), END) :
- MACRO_NONE );
- case CFLEX: // print accent circonflex
- return (record->event.pressed ?
- MACRO( T(GRV), T(SPC), END ) :
- MACRO_NONE );
- }
- return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
- uint8_t layer;
- layer = biton32(layer_state);
-
- if (current_layer_global != layer) {
- current_layer_global = layer;
-
- // unset CAPSLOCK and SCROLL LOCK LEDs
- led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_CAPS_LOCK));
- led_set_kb(host_keyboard_leds() & ~(1<<USB_LED_SCROLL_LOCK));
- // set SCROLL LOCK LED when the mouse layer is active, CAPS LOCK when PROG layer is active
- if (layer == MOUSE1 || layer == MOUSE2) {
- led_set_kb(host_keyboard_leds() | (1<<USB_LED_SCROLL_LOCK));
- } else if (layer == PROG1 || layer == PROG2) {
- led_set_kb(host_keyboard_leds() | (1<<USB_LED_CAPS_LOCK));
- }
- }
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
-
-void tap_helper(keyrecord_t *record, uint16_t orig_mod, uint16_t macro_mod, uint16_t macro_kc ) {
- if (record->event.pressed) {
- if (record->tap.count > 0 && !record->tap.interrupted) {
- if (record->tap.interrupted) {
- register_mods(MOD_BIT(orig_mod));
- }
- } else {
- register_mods(MOD_BIT(orig_mod));
- }
- } else {
- if (record->tap.count > 0 && !(record->tap.interrupted)) {
- add_weak_mods(MOD_BIT(macro_mod));
- send_keyboard_report();
- register_code(macro_kc);
- unregister_code(macro_kc);
- del_weak_mods(MOD_BIT(macro_mod));
- send_keyboard_report();
- record->tap.count = 0; // ad hoc: cancel tap
- } else {
- unregister_mods(MOD_BIT(orig_mod));
- }
- }
-}
-
-/* if LCTRL is tabbed, print (, or ) if RCTRL is tabbed, same for LALT/RALT and [/] */
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- // The code is copied from keymap_hasu.c in the tmk keyboards hhkb folder
- switch (id) {
- case LCTRL_BRACKET:
- tap_helper(record, KC_LCTL, KC_RALT, KC_8);
- break;
- case RCTRL_BRACKET:
- tap_helper(record, KC_RCTL, KC_RALT, KC_9);
- break;
- case LALT_CURLY:
- tap_helper(record, KC_LALT, KC_RALT, KC_7);
- break;
- case RALT_CURLY:
- tap_helper(record, KC_RALT, KC_RALT, KC_0);
- break;
- case LSHFT_PAREN:
- tap_helper(record, KC_LSFT, KC_LSFT, KC_8);
- break;
- case RSHFT_PAREN:
- tap_helper(record, KC_RSFT, KC_LSFT, KC_9);
- break;
- case CTRL_CLICK:
- if (record->event.pressed) {
- mousekey_clear();
- register_mods(MOD_BIT(KC_LCTL));
- send_keyboard_report();
- wait_ms(5);
- mousekey_on(KC_BTN1);
- mousekey_send();
- wait_ms(10);
- mousekey_off(KC_BTN1);
- mousekey_send();
- wait_ms(5);
- unregister_mods(MOD_BIT(KC_LCTL));
- send_keyboard_report();
- }
- break;
- }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- uint8_t layer;
- layer = biton32(layer_state);
- if (layer == PROG2) {
- if (keycode >= KC_A && keycode <= KC_EXSEL && \
- !( // do not send LSFT + these keycodes, they are needed for emulating the US layout
- keycode == KC_NONUS_BSLASH ||
- keycode == KC_RBRC ||
- keycode == KC_BSLS ||
- keycode == KC_GRV
- )) {
- // LSFT is the modifier for this layer, so we set LSFT for every key to get the expected behavior
- if (record->event.pressed) {
- register_mods(MOD_LSFT);
- } else {
- unregister_mods(MOD_LSFT);
- }
- }
- }
- return true;
-}
+++ /dev/null
-# My personal keymap for the Kitten Paw controller
-
-This keymap only works correctly when you have your OS configured with a German keymap. Use the keymap however you like. It's most likely a living thing that will never be quite finished.
-
-## Description of the layers
-Layer 0 (DEFAULT) works just like you would expect a keyboard to work, mostly, except:
-Caps Lock switches to the mouse layer, RGUI and APP are switches to the programming layer and media layer.
-Mouse and programming layer switches can be held or double-tapped to lock.
-Holding space switches to the MISC layer where I currently accumulate useful shortcuts.
-Tapping left and right Shift, Ctrl and Alt will send (), [] and {} respectively.
-
-Layers 1 and 2 (PROG1 and PROG2) emulate the US layout while still using a German OS keymap setting. I was annoyed of having to change the OS settings every time I wanted to use the US layout for coding, so I made these layers to behave just like the US layout even though the OS still uses German. The shift keys were a bit tricky, I had to use them as MO(PROG2) switches, so to get the actual expected behavior I enable LSFT for almost every keypress on PROG2 in ```process_record_user```. Since the shift keys are MO() function keys, they do not print () at the moment, which sucks. I'm working on it.
-
-Layer 3 (MEDIA) just has a couple of media keys on it, mainly around the cursor keys and nav key cluster.
-
-Layers 4 and 5 (MOUSE1 and MOUSE2) are mouse layers. Move the cursor using ESDF, scroll using HJKL, Space for left click, N and M for right and middle click. There's more, look at the keymap.
-
-Layer 6 is a layer I don't have a good name for, so I call it MISC. You'll find cursor keys at ESDF, other navigation keys around the HJKL cluster and F12 to F24 on the F-keys. For now.
\ No newline at end of file
+++ /dev/null
-#include "kitten_paw.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- CONFIG_LED_IO;
- CONFIG_LED_IO;
- print_dec(usb_led);
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- USB_LED_CAPS_LOCK_ON;
- else
- USB_LED_CAPS_LOCK_OFF;
-
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- USB_LED_NUM_LOCK_ON;
- else
- USB_LED_NUM_LOCK_OFF;
- if (usb_led & (1<<USB_LED_SCROLL_LOCK))
- USB_LED_SCROLL_LOCK_ON;
- else
- USB_LED_SCROLL_LOCK_OFF;
- led_set_user(usb_led);
-}
+++ /dev/null
-#ifndef KITTEN_PAW_H
-#define KITTEN_PAW_H
-
-#include "quantum.h"
-
-#define CONFIG_LED_IO \
- DDRB |= (1<<7); \
- DDRC |= (1<<5) | (1<<6);
-
-#define USB_LED_CAPS_LOCK_ON PORTC &= ~(1<<6)
-#define USB_LED_CAPS_LOCK_OFF PORTC |= (1<<6)
-#define USB_LED_NUM_LOCK_ON PORTB &= ~(1<<7)
-#define USB_LED_NUM_LOCK_OFF PORTB |= (1<<7)
-#define USB_LED_SCROLL_LOCK_ON PORTC &= ~(1<<5)
-#define USB_LED_SCROLL_LOCK_OFF PORTC |= (1<<5)
-
-// This a shortcut to help you visually see your layout.
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-/*
- Matrix col/row mapping
-
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
- `----' `-------------------' `-------------------' `-------------------' `--------------'
- ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
- | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
- |-------------------------------------------------------------------------| |--------------| |-------------------|
- | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
- |-------------------------------------------------------------------------| '--------------' |-------------- |
- | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
- |-------------------------------------------------------------------------| ,----. |-------------------|
- | N2 | I6 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
- |-------------------------------------------------------------------------| ,--------------. |-------------- |
- | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
- `-------------------------------------------------------------------------' `--------------' `-------------------'
-*/
-
-#define LAYOUT( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
- KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
-) \
-{ \
- {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \
- { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \
- {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \
- {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \
- { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \
- { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \
- {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \
- { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \
-}
-
-#define LAYOUT_fullsize_ansi( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
- KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
-) \
-{ \
- {KC_NO, KB0, KC0, KD0,KC_NO, KF0, KG0,KC_NO,KC_NO,KC_NO, KK0, KL0,KC_NO,KC_NO, KO0,KC_NO, KQ0, KR0}, \
- { KA1, KB1,KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1,KC_NO,KC_NO,KC_NO,KC_NO, KQ1,KC_NO}, \
- {KC_NO, KB2,KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2,KC_NO, KN2,KC_NO, KP2, KQ2, KR2}, \
- {KC_NO, KB3,KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3,KC_NO, KQ3, KR3}, \
- { KA4, KB4,KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4,KC_NO,KC_NO, KO4,KC_NO, KQ4, KR4}, \
- { KA5,KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5,KC_NO,KC_NO, KO5,KC_NO, KQ5, KR5}, \
- {KC_NO, KB6, KC6,KC_NO, KE6, KF6, KG6, KH6, KC_NO,KJ6, KK6, KL6,KC_NO,KC_NO, KO6,KC_NO, KQ6, KR6}, \
- { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7,KC_NO,KC_NO,KC_NO,KC_NO, KO7,KC_NO, KQ7, KR7} \
-}
-
-#endif
+++ /dev/null
-/*
- Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-#ifndef DEBOUNCING_DELAY
-# define DEBOUNCING_DELAY 5
-#endif
-static uint8_t debouncing = DEBOUNCING_DELAY;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static uint8_t read_rows(void);
-static void select_col(uint8_t col);
-
-inline uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-
-/* Column pin configuration
- *
- * col: 0 1 2 3 4 5 6 7
- * pin: PC7 PD5 PD3 PD1 PC2 PD6 PD4 PD2
- *
- * Rrr pin configuration
- *
- * These rrrs uses one 74HC154 4 to 16 bit demultiplexer (low
- * active), together with 2 rrrs driven directly from the micro
- * controller, to control the 18 rrrs. The rrrs are driven from
- * pins B6,5,4,3,2,1,0.
- */
-void matrix_init(void) {
- DDRC &= ~0b10000100; // Row input pins
- DDRD &= ~0b01111110;
- PORTC |= 0b10000100;
- PORTD |= 0b01111110;
-
- DDRB |= 0b01111111; // Column output pins
-
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void) {
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- select_col(col);
- _delay_us(3);
- uint8_t rows = read_rows();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
- bool curr_bit = rows & (1<<row);
- if (prev_bit != curr_bit) {
- matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
- debouncing = DEBOUNCING_DELAY;
- }
- }
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- }
- else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
- matrix_scan_quantum();
- return 1;
-}
-
-bool matrix_is_modified(void) {
- if (debouncing)
- return false;
- else
- return true;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) {
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
- }
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop32(matrix[i]);
- }
- return count;
-}
-
-static uint8_t read_rows(void) {
- return
- (PINC&(1<<7) ? 0 : (1<<0)) |
- (PIND&(1<<5) ? 0 : (1<<1)) |
- (PIND&(1<<3) ? 0 : (1<<2)) |
- (PIND&(1<<1) ? 0 : (1<<3)) |
- (PINC&(1<<2) ? 0 : (1<<4)) |
- (PIND&(1<<2) ? 0 : (1<<5)) |
- (PIND&(1<<4) ? 0 : (1<<6)) |
- (PIND&(1<<6) ? 0 : (1<<7));
-}
-
-static void select_col(uint8_t col) {
- switch (col) {
- case 0: PORTB = (PORTB & ~0b01111111) | 0b01100100; break;
- case 1: PORTB = (PORTB & ~0b01111111) | 0b01101100; break;
- case 2: PORTB = (PORTB & ~0b01111111) | 0b01100010; break;
- case 3: PORTB = (PORTB & ~0b01111111) | 0b01111010; break;
- case 4: PORTB = (PORTB & ~0b01111111) | 0b01100110; break;
- case 5: PORTB = (PORTB & ~0b01111111) | 0b01110110; break;
- case 6: PORTB = (PORTB & ~0b01111111) | 0b01101110; break;
- case 7: PORTB = (PORTB & ~0b01111111) | 0b01111110; break;
- case 8: PORTB = (PORTB & ~0b01111111) | 0b01000001; break;
- case 9: PORTB = (PORTB & ~0b01111111) | 0b00100001; break;
- case 10: PORTB = (PORTB & ~0b01111111) | 0b01101010; break;
- case 11: PORTB = (PORTB & ~0b01111111) | 0b01110010; break;
- case 12: PORTB = (PORTB & ~0b01111111) | 0b01111100; break;
- case 13: PORTB = (PORTB & ~0b01111111) | 0b01110100; break;
- case 14: PORTB = (PORTB & ~0b01111111) | 0b01111000; break;
- case 15: PORTB = (PORTB & ~0b01111111) | 0b01110000; break;
- case 16: PORTB = (PORTB & ~0b01111111) | 0b01100000; break;
- case 17: PORTB = (PORTB & ~0b01111111) | 0b01101000; break;
- }
-}
+++ /dev/null
-kitten_paw
-==========
-
-This is the firmware for the 2016 revision of the Kitten Paw controller by Bathroom Epiphanies. Most of the boilerplate code is the work of [BathroomEpiphanies](https://github.com/BathroomEpiphanies).
-
-NKRO doesn't work at the moment, I don't know if I will take the time to find out how to fix this, so far 6KRO is enough for me.
-
-Keyboard Maintainer: QMK Community
-Hardware Supported: Kitten Paw PCB
-Hardware Availability: https://geekhack.org/index.php?topic=46700.0
-
-Make example for this keyboard (after setting up your build environment):
-
- make kitten_paw:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+++ /dev/null
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u2
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
- OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI controls
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c
-
-LAYOUTS = fullsize_ansi
+++ /dev/null
-Pegasus Hoof Controller
-===
-
-Keyboard Maintainer: QMK Community
-Hardware Supported: Pegasus Hoof
-Hardware Availability: https://1upkeyboards.com/filco-pegasus-hoof-controller.html
-
-Make example for this keyboard (after setting up your build environment):
-
- make pegasus_hoof:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+++ /dev/null
-/*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6050
-#define DEVICE_VER 0x0104
-#define MANUFACTURER Filco
-#define PRODUCT Majestouch TKL \\w The Pegasus Hoof
-#define DESCRIPTION QMK firmware for Majestouch TKL
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 18
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#endif
+++ /dev/null
-/*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "pegasushoof.h"
-
-#define _______ KC_TRNS
-
-/* Swedish keys */
-#define SE_HALF KC_GRV
-#define SE_PLUS KC_MINS
-#define SE_ACUT KC_EQL
-#define SE_AO KC_LBRC
-#define SE_CIRC KC_RBRC
-#define SE_QUOT KC_BSLS
-#define SE_OE KC_SCLN
-#define SE_AE KC_QUOT
-#define SE_MINS KC_SLSH
-#define SE_LTGT KC_NUBS
-#define SE_LCBR RALT(KC_7)
-#define SE_LBRC RALT(KC_8)
-#define SE_RBRC RALT(KC_9)
-#define SE_RCBR RALT(KC_0)
-#define SE_PIPE RALT(SE_LTGT)
-#define SE_BSLS RALT(SE_PLUS)
-
-#define KM_BLOWRAK 0
-#define KM_QWERTY 1
-#define KM_MEDIA 2
-#define KM_HAXHAX 3
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Blowrak ISO layer, a Swedish take on Dvorak */
- [KM_BLOWRAK] = KEYMAP( \
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
- KC_TAB, SE_AO, SE_AE, SE_OE, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_COMM,SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \
- KC_LCTRL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_H, KC_D, KC_T, KC_N, KC_S, SE_MINS, KC_ENT, \
- KC_LSFT, SE_LTGT,KC_DOT, KC_Q, KC_J, KC_K, KC_B, KC_X, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, KC_UP, \
- KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT),
- /* Layer 1: Standard ISO layer */
- [KM_QWERTY] = KEYMAP( \
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- SE_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, SE_PLUS,SE_ACUT,KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, SE_AO, SE_CIRC,SE_QUOT, KC_DEL, KC_END, KC_PGDN, \
- KC_LCTRL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, SE_OE, SE_AE, KC_ENT, \
- KC_LSFT, SE_LTGT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, SE_MINS, KC_RSFT, KC_UP, \
- KC_FN0, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN1, KC_LEFT,KC_DOWN,KC_RGHT),
- /* Layer 2: Media layer */
- [KM_MEDIA] = KEYMAP( \
- _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_MUTE,_______,KC_VOLD, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \
- _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT),
- /* Layer 3: Programming layer */
- [KM_HAXHAX] = KEYMAP( \
- _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,SE_LCBR,SE_PIPE,SE_RCBR,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,SE_LBRC,SE_BSLS,SE_RBRC,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \
- _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA),
- [1] = ACTION_LAYER_TOGGLE(KM_QWERTY)
-};
-
-void matrix_scan_user(void)
-{
- uint8_t layer = biton32(layer_state);
- switch (layer) {
- case KM_BLOWRAK:
- ph_caps_led_on();
- ph_sclk_led_off();
- break;
- case KM_QWERTY:
- ph_sclk_led_on();
- ph_caps_led_off();
- break;
- }
-}
-
-/* Mixes in KM_HAXHAX via RALT modifier without shadowing the RALT key combinations. */
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- uint8_t modifiers = get_mods();
- if (modifiers & MOD_BIT(KC_RALT) && record->event.pressed) {
- uint16_t kc = keymap_key_to_keycode(KM_HAXHAX, record->event.key);
- if (kc != KC_TRNS) {
- register_code(kc);
- unregister_code(kc);
- return false;
- }
- }
- return true;
-}
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-/* overridden settings: */
-
-#undef PRODUCT
-#define PRODUCT Pegasus Hoof Citadel
-
-#endif
+++ /dev/null
-/* Copyright 2018 Daniel Rose <droseger@protonmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "pegasushoof.h"
-
-/* Allow shortcuts for combos like RALT(KC_RBRC) that don't take up more than 7 characters: */
-#define G(kc) RALT(KC_##kc)
-#define A(kc) LALT(KC_##kc)
-#define C(kc) LCTL(KC_##kc)
-#undef S /* Original shortcut (quantum_keycodes.h) takes full-sized keycodes: too long! */
-#define S(kc) LSFT(KC_##kc)
-#define CTALDEL LCTL(LALT(KC_DEL))
-
-enum layers {
- DEF,
- FUN,
- RES,
-};
-
-enum tap_dance {
- AF4,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Layer 0: default layer (ISO-DE)
- * .----. .-------------------. .-------------------. .-------------------. .--------------.
- * |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:|
- * | | | | | | | | | | | | | | | | | |SyRq| |A+F4|
- * '----' '-------------------' '-------------------' '-------------------' '--------------'
- * .------------------------------------------------------------------------. .--------------.
- * |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp|
- * |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | |
- * |------------------------------------------------------------------------| |--------------|
- * |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn|
- * | | | | €| | | | | | | | |+ ~| n | | | | |
- * |------------------------------------------------------------------\ t | '--------------'
- * |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e |
- * |Layer 2| | | | | | | | | | | |# | r |
- * |------------------------------------------------------------------------| .----.
- * |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up |
- * | |< ¦| | | | | | | µ|, |. |- | | | |
- * |------------------------------------------------------------------------| .--------------.
- * |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ|
- * | | | | | | |Lay 2| | | | | |
- * '------------------------------------------------------------------------' '--------------'
- * NUHS = true position of KC_NUHS
- */
-[DEF] = KEYMAP( \
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,TD(AF4), \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_NUHS, KC_DEL, KC_END, KC_PGDN, \
- MO(FUN),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,/*NUHS*/KC_ENT, \
- KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_LALT,MO(FUN),KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT),
-
- /* Layer 1: function layer
- * .----. .-------------------. .-------------------. .-------------------. .--------------.
- * |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus|
- * |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea|
- * '----' '-------------------' '-------------------' '-------------------' '--------------'
- * .------------------------------------------------------------------------. .--------------.
- * | | | | | | | | | | | | | | | | | |Mou:|
- * | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp|
- * |------------------------------------------------------------------------| |--------------|
- * | | | | | | | | | | | | |~ | | | | |Mou:|
- * | | | | | | | | | | | | | | | | | |WhDn|
- * |------------------------------------------------------------------\ | '--------------'
- * |CapsLck|Mou:|Mou:| | | | | | | | | | | |
- * | |Fast|Slow| | | | | | | | | | | |
- * |------------------------------------------------------------------------| .----.
- * | | | | | | | | |µ | | | | | |Mou:|
- * | | | | | | | | | | | | | | |Up |
- * |------------------------------------------------------------------------| .--------------.
- * |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:|
- * |Bttn2|Bttn1| | | | | | | |Left|Down|Righ|
- * '------------------------------------------------------------------------' '--------------'
- *
- */
-[FUN] = KEYMAP( \
- CTALDEL, KC_MYCM,KC_WHOM,KC_CALC,KC_MSEL,KC_MPRV,KC_MNXT,KC_MPLY,KC_MSTP,KC_MUTE,KC_VOLD,KC_VOLU,MO(RES), _______,KC_SLCK,KC_PAUS, \
- _______,_______,_______,_______,_______,_______,_______,G(7), G(8), G(9), G(0), G(MINS),_______,_______, _______,_______,KC_WH_U, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,G(RBRC),_______, _______,_______,KC_WH_D, \
- KC_CAPS,KC_ACL2,KC_ACL0,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,G(M), _______,_______,_______, _______, KC_MS_U, \
- KC_BTN2,KC_BTN1,_______, _______, _______,KC_RGUI,KC_APP ,_______, KC_MS_L,KC_MS_D,KC_MS_R),
-
-
-/* Layer 3: Reset layer (prevents accidental resets) */
-[RES] = KEYMAP( \
- _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,/*NUHS*/_______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, _______, \
- _______,_______,_______, _______, _______,_______,_______,_______, _______,_______,_______),
-};
-
-qk_tap_dance_action_t tap_dance_actions[] = {
- /* Tap once: nothing. Tap twice: Alt+F4 */
- [AF4] = ACTION_TAP_DANCE_DOUBLE(XXXXXXX,A(F4)),
-};
-
-void led_set_user(uint8_t usb_led) {
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- ph_caps_led_on();
- } else {
- ph_caps_led_off();
- }
-
- if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
- ph_sclk_led_on();
- } else {
- ph_sclk_led_off();
- }
-}
+++ /dev/null
-# Citadel keymap for pegasushoof
-
-Designed for ISO-DE and similar ISO layouts.
-
-The central idea of this keymap is to avoid unergonomic key combos that force the user to either press
-multiple keys with one hand or to use the left hand for right-sided keys. For instance, ISO-DE users
-have to press `AltGr`+`7` to type _{_. The keymap allows ergonomic access to the right-sided keys of the
-German AltGr-layer by turning `Caps Lock` into a hybrid Fn/AltGr-key. It can easily be adapted for other
-ISO layouts.
-
-The _Function_ layer also offers mouse emulation and function/media keys in the F-Row.
-
-`Pause/Break` is used as a safe _close key_: A _single tap_ does nothing, a _double tap_ executes ALT+F4.
-
-Named after the homonymous space station from _Mass Effect_. Made by [Daniel Rose](https://github.com/droseger/).
-
-## [1] Layers
-
-### Layer 1 (Default)
- .----. .-------------------. .-------------------. .-------------------. .--------------.
- |Esc | |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10 |F11 |F12 | |PrSc|SLck|2Tp:|
- | | | | | | | | | | | | | | | | | |SyRq| |A+F4|
- '----' '-------------------' '-------------------' '-------------------' '--------------'
- .------------------------------------------------------------------------. .--------------.
- |° |! |" |§ |$ |% |& |/ |( |) |= |? |` |Backspa| |Ins |Home|PgUp|
- |^ |1 |2 ²|3 ³|4 |5 |6 |7 {|8 [|9 ]|0 }|ß \|´ | | | | | |
- |------------------------------------------------------------------------| |--------------|
- |Tab |Q |W |E |R |T |Z |U |I |O |P |Ü |* | E | |Del |End |PgDn|
- | | | | €| | | | | | | | |+ ~| n | | | | |
- |------------------------------------------------------------------\ t | '--------------'
- |Fn: |A |S |D |F |G |H |J |K |L |Ö |Ä |' | e |
- |Layer 2| | | | | | | | | | | |# | r |
- |------------------------------------------------------------------------| .----.
- |Shift|> |Y |X |C |V |B |N |M |; |: |_ |Shift | |Up |
- | |< ¦| | | | | | | µ|, |. |- | | | |
- |------------------------------------------------------------------------| .--------------.
- |Ctrl |Super|Alt | |AltGr|Alt |Fn: |Ctrl | |Left|Down|Righ|
- | | | | | | |Lay 2| | | | | |
- '------------------------------------------------------------------------' '--------------'
-
-### Layer 2 (Function)
- .----. .-------------------. .-------------------. .-------------------. .--------------.
- |Ctl+| |My |WWW:|Calc|Medi| |Mus:|Mus:|Mus:|Mus:| |Vol:|Vol:|Vol:|See:| | | |Paus|
- |A+De| |Comp|Home| |Play| |Prev|Next|Paus|Stop| |Mute|Down|Up |[3] | | | |Brea|
- '----' '-------------------' '-------------------' '-------------------' '--------------'
- .------------------------------------------------------------------------. .--------------.
- | | | | | | | | | | | | | | | | | |Mou:|
- | | | | | | | |{ |[ |] |} |\ | | | | | |WhUp|
- |------------------------------------------------------------------------| |--------------|
- | | | | | | | | | | | | |~ | | | | |Mou:|
- | | | | | | | | | | | | | | | | | |WhDn|
- |------------------------------------------------------------------\ | '--------------'
- |CapsLck|Mou:|Mou:| | | | | | | | | | | |
- | |Fast|Slow| | | | | | | | | | | |
- |------------------------------------------------------------------------| .----.
- | | | | | | | | |µ | | | | | |Mou:|
- | | | | | | | | | | | | | | |Up |
- |------------------------------------------------------------------------| .--------------.
- |Mous:|Mous:| | | |Super|App | | |Mou:|Mou:|Mou:|
- |Bttn2|Bttn1| | | | | | | |Left|Down|Righ|
- '------------------------------------------------------------------------' '--------------'
-
-Layer 3 exists solely to prevent users from accidentally activating boot mode: `R` is redefined
-as `RESET` key [3].
-
-## [2] How to build and install
-1) Prerequisite: install the necessary [build tools](https://docs.qmk.fm/#/getting_started_build_tools)
-such as [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer).
- - You might need to [add udev rules](https://docs.qmk.fm/#/faq_build?id=can39t-program-on-linux) under Linux.
-2) To test if the keymap compiles, simply run `make pegasushoof:citadel`
-3) Enter the `qmk_firmware` root directory and run `make pegasushoof:citadel:dfu`
-4) Reset controller to _Boot mode_ by pressing the `RESET` key or by using a magnet.
-
-## [3] How to access Boot mode after install
-Press `Fn+F12+R`
+++ /dev/null
-# Build Options
-# change to "no" to disable the options
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-TAP_DANCE_ENABLE = yes # see https://docs.qmk.fm/#/feature_tap_dance (+1000)
-
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-/*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "pegasushoof.h"
-
-#define _______ KC_TRNS
-
-#define KM_QWERTY 0
-#define KM_MEDIA 1
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Layer 0: Standard ISO layer */
- [KM_QWERTY] = KEYMAP( \
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC, KC_INS, KC_HOME,KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_CLCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,KC_MENU,KC_FN0, KC_LEFT,KC_DOWN,KC_RGHT),
- /* Layer 1: Function layer */
- [KM_MEDIA] = KEYMAP( \
- _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_WAKE,KC_PWR, KC_SLEP, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLU, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______,KC_VOLD, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
- _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, KC_MPLY, \
- _______,_______,_______, _______, _______,_______,RESET ,_______, KC_MPRV,KC_MSTP,KC_MNXT)
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(KM_MEDIA)
-};
-
-void led_set_user(uint8_t usb_led) {
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- ph_caps_led_on();
- } else {
- ph_caps_led_off();
- }
-
- if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
- ph_sclk_led_on();
- } else {
- ph_sclk_led_off();
- }
-}
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-/*
-Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-static uint8_t debouncing = DEBOUNCING_DELAY;
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void select_row(uint8_t col);
-
-inline uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- /* Column output pins */
- DDRD |= 0b01111011;
- /* Row input pins */
- DDRC &= ~0b10000000;
- DDRB &= ~0b01111111;
- PORTC |= 0b10000000;
- PORTB |= 0b01111111;
-
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void)
-{
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- select_row(col);
- wait_us(30);
- matrix_row_t rows = read_cols();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
- bool curr_bit = rows & (1<<row);
- if (prev_bit != curr_bit) {
- matrix_debouncing[row] ^= (matrix_row_t) 1 << col;
- debouncing = DEBOUNCING_DELAY;
- }
- }
- }
-
- if (debouncing) {
- if (--debouncing) {
- wait_ms(1);
- } else {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- }
- }
-
- matrix_scan_quantum();
-
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing)
- return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return matrix[row] & 1 << col;
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row); print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
-}
-
-static matrix_row_t read_cols(void)
-{
- return
- (PINB & (1 << 5) ? 0 : 1 << 0) |
- (PINC & (1 << 7) ? 0 : 1 << 1) |
- (PINB & (1 << 4) ? 0 : 1 << 2) |
- (PINB & (1 << 6) ? 0 : 1 << 3) |
- (PINB & (1 << 1) ? 0 : 1 << 4) |
- (PINB & (1 << 0) ? 0 : 1 << 5) |
- (PINB & (1 << 3) ? 0 : 1 << 6) |
- (PINB & (1 << 2) ? 0 : 1 << 7);
-}
-
-static void select_row(uint8_t col)
-{
- switch (col) {
- case 0:
- PORTD = (PORTD & ~0b01111011) | 0b00110011;
- break;
- case 1:
- PORTD = (PORTD & ~0b01111011) | 0b01110000;
- break;
- case 2:
- PORTD = (PORTD & ~0b01111011) | 0b00010011;
- break;
- case 3:
- PORTD = (PORTD & ~0b01111011) | 0b01101000;
- break;
- case 4:
- PORTD = (PORTD & ~0b01111011) | 0b00001011;
- break;
- case 5:
- PORTD = (PORTD & ~0b01111011) | 0b00111011;
- break;
- case 6:
- PORTD = (PORTD & ~0b01111011) | 0b01111000;
- break;
- case 7:
- PORTD = (PORTD & ~0b01111011) | 0b01100001;
- break;
- case 8:
- PORTD = (PORTD & ~0b01111011) | 0b01101001;
- break;
- case 9:
- PORTD = (PORTD & ~0b01111011) | 0b01110001;
- break;
- case 10:
- PORTD = (PORTD & ~0b01111011) | 0b01101010;
- break;
- case 11:
- PORTD = (PORTD & ~0b01111011) | 0b01100010;
- break;
- case 12:
- PORTD = (PORTD & ~0b01111011) | 0b01111001;
- break;
- case 13:
- PORTD = (PORTD & ~0b01111011) | 0b01100000;
- break;
- case 14:
- PORTD = (PORTD & ~0b01111011) | 0b01000011;
- break;
- case 15:
- PORTD = (PORTD & ~0b01111011) | 0b00011011;
- break;
- case 16:
- PORTD = (PORTD & ~0b01111011) | 0b00100011;
- break;
- case 17:
- PORTD = (PORTD & ~0b01111011) | 0b00101011;
- break;
- }
-}
+++ /dev/null
-/*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "pegasushoof.h"
-
-
-extern inline void ph_caps_led_on(void);
-extern inline void ph_caps_led_off(void);
-
-extern inline void ph_sclk_led_on(void);
-extern inline void ph_sclk_led_off(void);
-
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_action_user(keyrecord_t *record) {
- return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}
-
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-bool process_action_kb(keyrecord_t *record) {
- return process_action_user(record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- led_set_user(usb_led);
-}
+++ /dev/null
-/*
-Copyright 2016 Daniel Svensson <dsvensson@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef PEGASUSHOOF_H
-#define PEGASUSHOOF_H
-
-#include "matrix.h"
-#include "quantum.h"
-
-#define ___ KC_NO
-
-#define KEYMAP( \
- KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
- KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
- KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
- KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
- KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
- KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0 \
- ) { /* 00-A 01-B 02-C 03-D 04-E 05-F 06-G 07-H 08-I 09-J 10-K 11-L 12-M 13-N 14-O 15-P 16-Q 17-R */ \
- /* 0 */ { ___ , ___ , KC0 , ___ , ___ , KF0 , ___ , ___ , ___ , KJ0 , KK0 , ___ , KM0 , KN0 , KO0 , ___ , KQ0 , KR0 }, \
- /* 1 */ { ___ , ___ , ___ , ___ , ___ , ___ , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , KM1 , ___ , KO1 , KP1 , ___ , ___ }, \
- /* 2 */ { ___ , KB2 , ___ , KD2 , ___ , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , KM2 , ___ , KO2 , ___ , ___ , ___ }, \
- /* 3 */ { KA3 , KB3 , ___ , ___ , ___ , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , ___ , KO3 , ___ , ___ , ___ }, \
- /* 4 */ { ___ , ___ , KC4 , ___ , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , KM4 , ___ , KO4 , KP4 , KQ4 , KR4 }, \
- /* 5 */ { ___ , ___ , KC5 , ___ , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , KM5 , KN5 , KO5 , KP5 , ___ , ___ }, \
- /* 6 */ { ___ , ___ , KC6 , ___ , ___ , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , KL6 , ___ , KN6 , KO6 , ___ , KQ6 , ___ }, \
- /* 7 */ { ___ , ___ , ___ , ___ , ___ , KF7 , KG7 , KH7 , KI7 , KJ7 , KK7 , KL7 , KM7 , KN7 , ___ , KP7 , ___ , ___ }, \
- }
-
-inline void ph_caps_led_on(void) { DDRC |= (1<<6); PORTC &= ~(1<<6); }
-inline void ph_caps_led_off(void) { DDRC &= ~(1<<6); PORTC &= ~(1<<6); }
-
-inline void ph_sclk_led_on(void) { DDRC |= (1<<5); PORTC &= ~(1<<5); }
-inline void ph_sclk_led_off(void) { DDRC &= ~(1<<5); PORTC &= ~(1<<5); }
-
-
-#endif
+++ /dev/null
-# MCU name
-MCU = atmega32u2
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-
-
-CUSTOM_MATRIX = yes
-SRC = matrix.c
+++ /dev/null
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Bathroom Epiphanies
-#define PRODUCT tiger_lily
-#define DESCRIPTION Tiger Lily controller for the Filco Majestouch 2
-
-/*
- * Frosty Flake Rev. 20140521 made by Bathroom Ephiphanies
- * Ported from the Bathroom Epiphanies TMK Firmware:
- * https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers
- *
- */
-
-/* key matrix size */
-#define MATRIX_ROWS 8 // Row0 - Row7 in the schematic
-#define MATRIX_COLS 18 // ColA - ColR in the schematic
-
-/*
- * Keyboard Matrix Assignments
- */
-#define UNUSED_PINS { B0, C4, D3 }
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "tiger_lily",
- "url": "",
- "maintainer": "qmk",
- "width": 22.5,
- "height": 6.5,
- "layouts": {
- "LAYOUT": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
- },
- "LAYOUT_fullsize_ansi": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5, "w":2}, {"label":".", "x":20.5, "y":5.5}]
- }
- }
-}
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
-};
\ No newline at end of file
+++ /dev/null
-# The default keymap for tiger_lily
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT_fullsize_ansi(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,KC_SLCK,KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS,KC_HOME,KC_PGUP, KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL, KC_END,KC_PGDN, KC_P7, KC_P8, KC_P9,KC_PPLS, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3,KC_PENT, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT, KC_P0,KC_PDOT)
-};
\ No newline at end of file
+++ /dev/null
-# default_ansi
-
-A standard fullsize ANSI-layout keymap for Tiger Lily-powered keyboards.
+++ /dev/null
-# Build Options
-# change to "no" to disable the options, or define them in the Makefile in
-# the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-MIDI_ENABLE = no # MIDI controls
-AUDIO_ENABLE = no # Audio output on port C6
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
+++ /dev/null
-/*
- Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-#ifndef DEBOUNCING_DELAY
-# define DEBOUNCING_DELAY 5
-#endif
-static uint8_t debouncing = DEBOUNCING_DELAY;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t scan_col(void) {
- return (
- (PINC&(1<<2) ? 0 : ((matrix_row_t)1<<0)) | \
- (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<1)) | \
- (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<2)) | \
- (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<3)) | \
- (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<4)) | \
- (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<5)) | \
- (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<6)) | \
- (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<7))
- );
-}
-
-static void select_col(uint8_t col) {
- switch (col) {
- case 0: PORTD = (PORTD & ~0b01110111) | 0b01110110; break; \
- case 1: PORTD = (PORTD & ~0b01110111) | 0b01100001; break; \
- case 2: PORTD = (PORTD & ~0b01110111) | 0b01100101; break; \
- case 3: PORTD = (PORTD & ~0b01110111) | 0b00000011; break; \
- case 4: PORTD = (PORTD & ~0b01110111) | 0b00000111; break; \
- case 5: PORTD = (PORTD & ~0b01110111) | 0b00010011; break; \
- case 6: PORTD = (PORTD & ~0b01110111) | 0b00010111; break; \
- case 7: PORTD = (PORTD & ~0b01110111) | 0b00100011; break; \
- case 8: PORTD = (PORTD & ~0b01110111) | 0b00100111; break; \
- case 9: PORTD = (PORTD & ~0b01110111) | 0b00110011; break; \
- case 10: PORTD = (PORTD & ~0b01110111) | 0b01110010; break; \
- case 11: PORTD = (PORTD & ~0b01110111) | 0b01100110; break; \
- case 12: PORTD = (PORTD & ~0b01110111) | 0b01110000; break; \
- case 13: PORTD = (PORTD & ~0b01110111) | 0b01100100; break; \
- case 14: PORTD = (PORTD & ~0b01110111) | 0b01100000; break; \
- case 15: PORTD = (PORTD & ~0b01110111) | 0b01000111; break; \
- case 16: PORTD = (PORTD & ~0b01110111) | 0b01000011; break; \
- case 17: PORTD = (PORTD & ~0b01110111) | 0b00110111; break;
- }
-}
-
-void matrix_init(void) {
- /* Column output pins */ \
- DDRD |= 0b01110111; \
- /* Row input pins */ \
- DDRC &= ~0b10000100; \
- DDRB &= ~0b01111110; \
- PORTC |= 0b10000100; \
- PORTB |= 0b01111110;
-
- for (uint8_t i=0; i < MATRIX_ROWS; i++)
- matrix[i] = matrix_debouncing[i] = 0;
-
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void) {
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- select_col(col);
- _delay_us(3);
- matrix_row_t col_scan = scan_col();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
- bool curr_bit = col_scan & (1<<row);
- if (prev_bit != curr_bit) {
- matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
- debouncing = DEBOUNCING_DELAY;
- }
- }
- }
-
- if (debouncing) {
- if (--debouncing)
- _delay_ms(1);
- else
- for (uint8_t i = 0; i < MATRIX_ROWS; i++)
- matrix[i] = matrix_debouncing[i];
- }
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
- #ifndef NO_PRINT
- print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix_row_t matrix_row = matrix_get_row(row);
- xprintf("%02X: ", row);
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- bool curr_bit = matrix_row & (1<<col);
- xprintf("%c", curr_bit ? '*' : '.');
- }
- print("\n");
- }
- #endif
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t row = 0; row < MATRIX_ROWS; row++)
- count += bitpop32(matrix[row]);
- return count;
-}
\ No newline at end of file
+++ /dev/null
-tiger_lily
-==========
-
-This is the firmware for Rev. 20161114 of the Tiger Lily controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Filco Majestouch 2 104 key](https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1819). Bathroom Epiphanies has advised that the source is also compatible with the Black Petal controller, however I do not own an example to test against.
-
-The code was adapted from the [BathroomEpiphanies TMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_tmk_keyboard/tree/master/be_controllers).
-
-Keyboard Maintainer: QMK Community
-Hardware Supported: Tiger Lily
-Hardware Availability: https://geekhack.org/index.php?topic=46700.0
-
-Make example for this keyboard (after setting up your build environment):
-
- make tiger_lily:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+++ /dev/null
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u2
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI controls
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c
-
-LAYOUTS = fullsize_ansi
+++ /dev/null
-#include "tiger_lily.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- DDRB |= (1<<7);
- DDRC |= (1<<5) | (1<<6);
-
- print_dec(usb_led);
-
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- PORTC &= ~(1<<5);
- else
- PORTC |= (1<<5);
-
- if (usb_led & (1<<USB_LED_SCROLL_LOCK))
- PORTB &= ~(1<<7);
- else
- PORTB |= (1<<7);
-
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- PORTC &= ~(1<<6);
- else
- PORTC |= (1<<6);
-
- led_set_user(usb_led);
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}
\ No newline at end of file
+++ /dev/null
-#ifndef TIGER_LILY_H
-#define TIGER_LILY_H
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-
-/*
- Matrix col/row mapping
-
- ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
- | J6 | | I4 | H4 | H2 | H6 | | A7 | E6 | D2 | D4 | | B4 | B7 | B6 | B0 | | C7 | C5 | A5 |
- `----' `-------------------' `-------------------' `-------------------' `--------------'
- ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
- | J4 | J7 | I7 | H7 | G7 | G4 | F4 | F7 | E7 | D7 | R7 | R4 | E4 | B2 | | L4 | O4 | Q4 | | K1 | L1 | Q1 | Q0 |
- |-------------------------------------------------------------------------| |--------------| |-------------------|
- | J2 | J5 | I5 | H5 | G5 | G2 | F2 | F5 | E5 | D5 | R5 | R2 | E2 | B3 | | K4 | O7 | Q7 | | K5 | L5 | Q5 | O5 |
- |-------------------------------------------------------------------------| '--------------' |-------------- |
- | O5 | J3 | I3 | H3 | G3 | G6 | F6 | F3 | E3 | D3 | R3 | R6 | B1 | | K2 | L2 | Q2 | |
- |-------------------------------------------------------------------------| ,----. |-------------------|
- | N2 | J1 | I1 | H1 | G1 | G0 | F0 | F1 | E1 | D1 | R0 | N3 | | O6 | | K3 | L3 | Q3 | O3 |
- |-------------------------------------------------------------------------| ,--------------. |-------------- |
- | A4 | P2 | C6 | K6 | C0 | M3 | D0 | A1 | | O0 | K0 | L0 | | L6 | Q6 | |
- `-------------------------------------------------------------------------' `--------------' `-------------------'
-*/
-#define LAYOUT( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
- KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
-) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/* A B C D E F G H I J K L M N O P Q R */ \
-/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \
-/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \
-/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \
-/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \
-/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
-/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \
-/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \
-/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
-}
-
-#define LAYOUT_fullsize_ansi( \
- KJ6, KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0, KC7, KC5, KA5, \
- KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2, KL4, KO4, KQ4, KK1, KL1, KQ1, KQ0, \
- KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3, KK4, KO7, KQ7, KK5, KL5, KQ5, KO5, \
- KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6, KB1, KK2, KL2, KQ2, \
- KN2, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0, KN3, KO6, KK3, KL3, KQ3, KO3, \
- KA4, KP2, KC6, KK6, KC0, KM3, KD0, KA1, KO0, KK0, KL0, KL6, KQ6 \
-) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/* A B C D E F G H I J K L M N O P Q R */ \
-/* 0 */ { KC_NO, KB0, KC0, KD0, KC_NO, KF0, KG0, KC_NO, KC_NO, KC_NO, KK0, KL0, KC_NO, KC_NO, KO0, KC_NO, KQ0, KR0 }, \
-/* 1 */ { KA1, KB1, KC_NO, KD1, KE1, KF1, KG1, KH1, KI1, KJ1, KK1, KL1, KC_NO, KC_NO, KC_NO, KC_NO, KQ1, KC_NO }, \
-/* 2 */ { KC_NO, KB2, KC_NO, KD2, KE2, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KC_NO, KN2, KC_NO, KP2, KQ2, KR2 }, \
-/* 3 */ { KC_NO, KB3, KC_NO, KD3, KE3, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KQ3, KR3 }, \
-/* 4 */ { KA4, KB4, KC_NO, KD4, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KC_NO, KC_NO, KO4, KC_NO, KQ4, KR4 }, \
-/* 5 */ { KA5, KC_NO, KC5, KD5, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KC_NO, KC_NO, KO5, KC_NO, KQ5, KR5 }, \
-/* 6 */ { KC_NO, KB6, KC6, KC_NO, KE6, KF6, KG6, KH6, KC_NO, KJ6, KK6, KL6, KC_NO, KC_NO, KO6, KC_NO, KQ6, KR6 }, \
-/* 7 */ { KA7, KB7, KC7, KD7, KE7, KF7, KG7, KH7, KI7, KJ7, KC_NO, KC_NO, KC_NO, KC_NO, KO7, KC_NO, KQ7, KR7 } \
-}
-
-#endif
+++ /dev/null
-/*
-Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x1337
-#define DEVICE_VER 0x0001
-#define MANUFACTURER BathroomEpiphanies
-#define PRODUCT Unloved Bastard
-#define DESCRIPTION Unloved Bastard controller for CM Masterkeys S
-
-/* key matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 18
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "unloved_bastard",
- "url": "",
- "maintainer": "qmk",
- "bootloader": "",
- "width": 18.25,
- "height": 6.5,
- "layouts": {
- "LAYOUT": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
- },
- "LAYOUT_tkl_ansi": {
- "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
- }
- }
-}
+++ /dev/null
-/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
-};
-
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
+++ /dev/null
-# The default keymap for unloved_bastard
+++ /dev/null
-/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
-
-// place overrides here
-
-#endif
+++ /dev/null
-/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT_tkl_ansi(\
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
- KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
- KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
- KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
-};
-
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
+++ /dev/null
-# default_ansi
-
-A standard tenkeyless ANSI-layout keymap for Unloved Bastard-powered keyboards.
+++ /dev/null
-/*
- Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
- Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-#ifndef DEBOUNCING_DELAY
-# define DEBOUNCING_DELAY 5
-#endif
-static uint8_t debouncing = DEBOUNCING_DELAY;
-
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t scan_col(void) {
- return (
- (PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
- (PINB&(1<<6) ? 0 : ((matrix_row_t)1<<1)) |
- (PINB&(1<<1) ? 0 : ((matrix_row_t)1<<2)) |
- (PINB&(1<<0) ? 0 : ((matrix_row_t)1<<3)) |
- (PINB&(1<<5) ? 0 : ((matrix_row_t)1<<4)) |
- (PINB&(1<<3) ? 0 : ((matrix_row_t)1<<5)) |
- (PINB&(1<<4) ? 0 : ((matrix_row_t)1<<6)) |
- (PINB&(1<<2) ? 0 : ((matrix_row_t)1<<7))
- );
-}
-
-static void select_col(uint8_t col) {
- switch (col) {
- case 0: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
- case 1: PORTD = (PORTD & ~0b00111111) | 0b00100011; break;
- case 2: PORTD = (PORTD & ~0b00111111) | 0b00010111; break;
- case 3: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
- case 4: PORTD = (PORTD & ~0b00111111) | 0b00010011; break;
- case 5: PORTD = (PORTD & ~0b00111111) | 0b00011011; break;
- case 6: PORTD = (PORTD & ~0b00111111) | 0b00110100; break;
- case 7: PORTD = (PORTD & ~0b00111111) | 0b00111010; break;
- case 8: PORTD = (PORTD & ~0b00111111) | 0b00111000; break;
- case 9: PORTD = (PORTD & ~0b00111111) | 0b00111100; break;
- case 10: PORTD = (PORTD & ~0b00111111) | 0b00110010; break;
- case 11: PORTD = (PORTD & ~0b00111111) | 0b00011111; break;
- case 12: PORTD = (PORTD & ~0b00111111) | 0b00001111; break;
- case 13: PORTD = (PORTD & ~0b00111111) | 0b00100111; break;
- case 14: PORTD = (PORTD & ~0b00111111) | 0b00000111; break;
- case 15: PORTD = (PORTD & ~0b00111111) | 0b00110110; break;
- case 16: PORTD = (PORTD & ~0b00111111) | 0b00001011; break;
- case 17: PORTD = (PORTD & ~0b00111111) | 0b00000011; break;
- }
-}
-
-void matrix_init(void) {
- /* Row output pins */
- DDRD |= 0b00111111;
- /* Column input pins */
- DDRC &= ~0b10000000;
- DDRB &= ~0b01111111;
- PORTC |= 0b10000000;
- PORTB |= 0b01111111;
-
- for (uint8_t i=0; i < MATRIX_ROWS; i++)
- matrix[i] = matrix_debouncing[i] = 0;
-
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void) {
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- select_col(col);
- _delay_us(3);
- matrix_row_t col_scan = scan_col();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
- bool curr_bit = col_scan & (1<<row);
- if (prev_bit != curr_bit) {
- matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
- debouncing = DEBOUNCING_DELAY;
- }
- }
- }
-
- if (debouncing) {
- if (--debouncing)
- _delay_ms(1);
- else
- for (uint8_t i = 0; i < MATRIX_ROWS; i++)
- matrix[i] = matrix_debouncing[i];
- }
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline matrix_row_t matrix_get_row(uint8_t row) {
- return matrix[row];
-}
-
-void matrix_print(void) {
-#ifndef NO_PRINT
- print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- matrix_row_t matrix_row = matrix_get_row(row);
- xprintf("%02X: ", row);
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- bool curr_bit = matrix_row & (1<<col);
- xprintf("%c", curr_bit ? '*' : '.');
- }
- print("\n");
- }
-#endif
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t row = 0; row < MATRIX_ROWS; row++)
- count += bitpop32(matrix[row]);
- return count;
-}
+++ /dev/null
-# unloved_bastard
-
-
-
-A short description of the keyboard/project
-
-Keyboard Maintainer: [Alexander Fougner](https://github.com/fougner)
-Hardware Supported: CoolerMaster Masterkeys S PBT (Not the Pro versions with backlighting etc)
-Hardware Availability: Pretty much anywhere
-
-Make example for this keyboard (after setting up your build environment):
-
- make unloved_bastard:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+++ /dev/null
-# MCU name
-#MCU = at90usb1286
-MCU = atmega32u2
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-
-CUSTOM_MATRIX = yes
-SRC += matrix.c
-
-LAYOUTS = tkl_ansi
+++ /dev/null
-/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "unloved_bastard.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- led_init_ports();
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
- return process_record_user(keycode, record);
-}
-
-// C5 left
-// C6 middle led
-// B7 right led
-void led_init_ports(void) {
- DDRB |= (1<<7);
- DDRC |= (1<<5);
- DDRC |= (1<<6);
-
- PORTB |= (1<<7);
- PORTC |= (1<<5);
- PORTC |= (1<<6);
-}
-
-
-void led_set_kb(uint8_t usb_led) {
-
- if (usb_led & (1<<USB_LED_CAPS_LOCK))
- PORTC &= ~(1<<5);
- else
- PORTC |= (1<<5);
-
- if (usb_led & (1<<USB_LED_NUM_LOCK))
- PORTB &= ~(1<<7);
- else
- PORTB |= (1<<7);
-
- if (usb_led & (1<<USB_LED_SCROLL_LOCK))
- PORTC &= ~(1<<6);
- else
- PORTC |= (1<<6);
-
- led_set_user(usb_led);
-}
+++ /dev/null
-/* Copyright 2017 REPLACE_WITH_YOUR_NAME
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef UNLOVED_BASTARD_H
-#define UNLOVED_BASTARD_H
-
-#include "quantum.h"
-
-#define LAYOUT( \
- KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
- KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
- KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
- KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
- KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
- KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \
-) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/* A B C D E F G H I J K L M N O P Q R */ \
-/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \
-/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \
-/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \
-/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \
-/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \
-/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \
-/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \
-/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \
-}
-
-#define LAYOUT_tkl_ansi( \
- KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
- KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
- KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
- KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
- KB2, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
- KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \
-) \
-{ \
-/* Columns and rows need to be swapped in the below definition */ \
-/* A B C D E F G H I J K L M N O P Q R */ \
-/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \
-/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \
-/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \
-/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \
-/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \
-/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \
-/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KC_NO, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \
-/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \
-}
-
-#endif
projects / qmk_firmware.git / commitdiff