/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0000
+#define PRODUCT_ID 0x2010
#define DEVICE_VER 0x0001
#define MANUFACTURER 1upkeyboards
#define PRODUCT super16
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-/*== all animations enable ==*/
-// #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
+ /*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+ /*== or choose animations ==*/
// #define RGBLIGHT_EFFECT_BREATHING
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
-/* number of backlight levels */
-
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
+
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0
+
+/* prevent stuck modifiers */
{
- "keyboard_name": "super16",
- "url": "",
- "maintainer": "qmk",
- "width": 4,
- "height": 4,
- "layouts": {
- "LAYOUT_ortho_4x4": {
- "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
- }
+ "keyboard_name": "super16",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 4,
+ "height": 4,
+ "layouts": {
+ "LAYOUT_ortho_4x4": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
+ },
+ "LAYOUT_numpad_4x4": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0, "h":2}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3, "w":2}, {"x":2, "y":3}]
}
-}
\ No newline at end of file
+ }
+}
*/
#include QMK_KEYBOARD_H
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
- QMKBEST = SAFE_RANGE,
- QMKURL
-};
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_ortho_4x4( /* Base */
- KC_A, KC_1, KC_2, KC_4, \
- KC_A, KC_1, KC_2, KC_4, \
- KC_A, KC_1, KC_2, KC_4, \
- KC_A, KC_1, KC_2, KC_4 \
+ RGB_TOG, KC_1, KC_U, KC_P,
+ RGB_MOD, KC_1, KC_U, KC_P,
+ RGB_TOG, KC_1, KC_U, KC_P,
+ RGB_MOD, KC_1, KC_U, KC_P
),
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case QMKBEST:
- if (record->event.pressed) {
- // when keycode QMKBEST is pressed
- SEND_STRING("QMK is the best thing ever!");
- } else {
- // when keycode QMKBEST is released
- }
- break;
- case QMKURL:
- if (record->event.pressed) {
- // when keycode QMKURL is pressed
- SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
- } else {
- // when keycode QMKURL is released
- }
- break;
- }
return true;
}
# MCU name
-#MCU = at90usb1286
MCU = atmega32u4
# Processor frequency.
# software delays.
F_CPU = 16000000
-
#
# LUFA specific
#
# atmega32a bootloadHID
BOOTLOADER = caterina
-
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#EXTRAFLAGS += -flto
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
-LAYOUTS = ortho_4x4
+LAYOUTS = ortho_4x4 numpad_4x4
#include "super16.h"
void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
- matrix_init_user();
+ matrix_init_user();
}
void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
- matrix_scan_user();
+ matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
- return process_record_user(keycode, record);
+ return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- led_set_user(usb_led);
+ led_set_user(usb_led);
}
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
+
#define LAYOUT_ortho_4x4( \
- k00, k01, k02, k03, \
- k10, k11, k12, k13, \
- k20, k21, k22, k23, \
- k30, k31, k32, k33 \
-) \
-{ \
- { k00, k01, k02, k03 }, \
- { k10, k11, k12, k13 }, \
- { k20, k21, k22, k23 }, \
- { k30, k31, k32, k33 }, \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, K33 } \
+}
+
+#define LAYOUT_numpad_4x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, \
+ K20, K21, K22, K23, \
+ K31, K32 \
+) { \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, KC_NO }, \
+ { K20, K21, K22, K23 }, \
+ { KC_NO, K31, K32, KC_NO } \
}
projects / qmk_firmware.git / commitdiff