--- /dev/null
+
+// generated from users/manna-harbour_miryoku/miryoku.org
+
+#include QMK_KEYBOARD_H
+
+#define KC_NP KC_NO // key is not present
+#define KC_NA KC_NO // present but not available for use
+#define KC_NU KC_NO // available but not used
+#define KC_RST RESET
+
+enum layers { BASE, MEDR, NAVR, MOUR, NSSL, NSL, FUNL };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [BASE] = LAYOUT_miryoku(
+ KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT,
+ LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O),
+ KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH,
+ KC_NP, KC_NP, LT(MEDR, KC_ESC), LT(NAVR, KC_SPC), LT(MOUR, KC_TAB), LT(NSSL, KC_ENT), LT(NSL, KC_BSPC), LT(FUNL, KC_DEL), KC_NP, KC_NP
+ ),
+ [NAVR] = LAYOUT_miryoku(
+ KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_AGIN, KC_UNDO, KC_CUT, KC_COPY, KC_PSTE,
+ KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_CAPS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT,
+ KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, KC_INS, KC_HOME, KC_PGDN, KC_PGUP, KC_END,
+ KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_ENT, KC_BSPC, KC_DEL, KC_NP, KC_NP
+ ),
+ [MOUR] = LAYOUT_miryoku(
+ KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU,
+ KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_NU, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R,
+ KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R,
+ KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_BTN3, KC_BTN1, KC_BTN2, KC_NP, KC_NP
+ ),
+ [MEDR] = LAYOUT_miryoku(
+ KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU,
+ KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT,
+ KC_NA, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU,
+ KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_MSTP, KC_MPLY, KC_MUTE, KC_NP, KC_NP
+ ),
+ [FUNL] = LAYOUT_miryoku(
+ KC_F12, KC_F7, KC_F8, KC_F9, KC_PSCR, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST,
+ KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
+ KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA,
+ KC_NP, KC_NP, KC_APP, KC_SPC, KC_TAB, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP
+ ),
+ [NSL] = LAYOUT_miryoku(
+ KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST,
+ KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
+ KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA,
+ KC_NP, KC_NP, KC_DOT, KC_0, KC_MINS, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP
+ ),
+ [NSSL] = LAYOUT_miryoku(
+ KC_LCBR, KC_AMPR, KC_ASTR, KC_LPRN, KC_RCBR, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST,
+ KC_COLN, KC_DLR, KC_PERC, KC_CIRC, KC_PLUS, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_PIPE, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA,
+ KC_NP, KC_NP, KC_GT, KC_RPRN, KC_UNDS, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP
+ )
+};
--- /dev/null
+#+Title: miryoku.org
+
+The miryoku layout is an ergonomic, minimal, orthogonal layout for ergo or ortho
+keyboards, implemented as part of the QMK firmware. The layout is maintained in
+emacs org-mode tables and converted to QMK keymap data structures using embedded
+python scripts. The layout is mapped onto keyboards with different physical
+layouts as a subset without code duplication using the QMK userland feature and
+C macros. Versions of the layout can also be seen outside of the QMK source at
+[[https://github.com/manna-harbour/miryoku/]].
+
+* Contents
+
+- [[#layout][Layout]]
+- [[#code-generation][Code Generation]]
+- [[#subset-mapping][Subset Mapping]]
+
+
+* Layout
+:PROPERTIES:
+:CUSTOM_ID: layout
+:END:
+
+** Info
+
+*** General Principles
+
+ - Use layers instead of reaching.
+ - Use both hands instead of contortions.
+ - Use the home positions as much as possible.
+ - Make full use of the thumbs.
+ - Avoid unnecessary complication.
+
+
+*** Specifics
+
+ - 5 columns, 3 rows, 3 thumb keys, 2 hands.
+ - Can be used on almost any split or non-split ergo or ortho keyboard.
+ - Includes all keys found on a US layout TKL keyboard, plus media keys and
+ mouse emulation.
+ - Home row is the middle row, home thumb key is the middle thumb key.
+ - Maximum 1-u movement from home position for fingers and thumbs, and only
+ along one axis (except for the inner index finger column which is
+ deprioritised compared with the home columns).
+ - Dual-function modifiers on home row, mirrored on both hands.
+ - Dual-function layer change on thumbs.
+ - Layers are designed orthogonally with a single purpose per hand and are
+ accessed by holding a thumb key on the opposite hand.
+ - Holding layer change and modifiers on one hand combined with a single key
+ press on the other hand can produce any combination of modifiers and
+ single keys without any finger contortions.
+ - Single function mods are also defined on layers on the same hand as the
+ layer change thumb key so layer change and mods can be held in any order
+ or simultaneously without race conditions.
+ - As mods are only enabled on the opposite hand, auto-repeat is available on
+ the home row on layers for use with cursor and mouse keys.
+ - Tap-hold auto-repeat is disabled to enable faster tap-hold switching on
+ thumbs but thumb tap keys are mirrored onto some layers for use with
+ auto-repeat.
+
+
+** Layers
+
+The layers are maintained in tables, with the thumb keys on the bottom row. NP
+indicates the key is not present and is used to fill in the table around the
+thumb keys. The grid arrangement of the tables does not imply a particular
+physical layout.
+
+Basic keycodes are entered without the KC_ prefix. Symbols can be entered as-is
+(excepting '"' (DQUO) and '|' (PIPE)). Empty cells are unused.
+
+The base layer has both halves of the layout joined for convenience. Other
+layers are specified as a single hand.
+
+*** Base (BASE)
+
+
+The base layer is maintained as separate tap and hold tables and are combined
+into the corresponding tap-hold keycodes for mods and layer change. RST and
+mods will be available on sub layers on the same hand as the layer change thumb
+key. Unknown names are considered to be layer names.
+
+Base layer alphas are Colemak DHm. Thumb keys are backspace, enter, delete on
+the right and space, tab, escape on the left. Dot, comma and apostrophe are
+included for prose, dot and slash for file and directory names.
+
+#+NAME: tap
+| Q | W | F | P | B | J | L | U | Y | ' |
+| A | R | S | T | G | M | N | E | I | O |
+| Z | X | C | D | V | K | H | , | . | / |
+| NP | NP | ESC | SPC | TAB | ENT | BSPC | DEL | NP | NP |
+
+#+NAME: hold
+| RST | | | | | | | | | RST |
+| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI |
+| | | | | | | | | | |
+| NP | NP | MEDR | NAVR | MOUR | NSSL | NSL | FUNL | NP | NP |
+
+
+*** Navigation (NAVR)
+
+Primary right-hand layer (left home thumb) is navigation and editing. Cursor
+keys are on the home position, line and page movement below, clipboard above,
+caps and insert on the inner column. Thumb keys are duplicated from the base
+layer to avoid having to layer change mid edit and to enable auto-repeat.
+
+#+NAME: navr
+| AGIN | UNDO | CUT | COPY | PSTE |
+| CAPS | LEFT | DOWN | UP | RGHT |
+| INS | HOME | PGDN | PGUP | END |
+| ENT | BSPC | DEL | NP | NP |
+
+
+*** Mouse (MOUR)
+
+Secondary RH layer is mouse emulation. Mouse movement mirrors cursor navigation
+on home and wheel mirrors line / page movement below. Buttons are on the
+thumbs. Mouse movement, click, and drag with modifiers can be performed from
+the home position. Unused keys are available for other related functions.
+
+#+NAME: mour
+| | | | | |
+| | MS_L | MS_D | MS_U | MS_R |
+| | WH_L | WH_D | WH_U | WH_R |
+| BTN3 | BTN1 | BTN2 | NP | NP |
+
+
+*** Media (MEDR)
+
+Tertiary RH layer is media control, with volume up / down and next / prev
+mirroring the navigation keys. Pause, stop and mute are on thumbs. Unused keys
+are available for other related functions.
+
+#+NAME: medr
+| | | | | |
+| | MPRV | VOLD | VOLU | MNXT |
+| | | | | |
+| MSTP | MPLY | MUTE | NP | NP |
+
+
+*** Numerals and Symbols (NSL)
+
+Primary left-hand layer (right home thumb) is numerals and symbols. Numerals
+are in the standard numpad locations with symbols in the remaining positions.
+Dot is duplicated from the base layer for convenience.
+
+#+NAME: nsl
+| [ | 7 | 8 | 9 | ] |
+| ; | 4 | 5 | 6 | = |
+| ` | 1 | 2 | 3 | \ |
+| NP | NP | . | 0 | - |
+
+
+*** Shifted Numerals and Symbols (NSSL)
+
+Secondary LH layer has shifted symbols in the same locations to reduce chording
+when using mods with shifted symbols. Automatically generated from unshifted
+table.
+
+
+*** Function and System (FUNL)
+
+Tertiary LH layer has function keys mirroring the numerals on the primary layer
+with extras on the pinkie column, plus system keys on the inner column. App
+(menu) is on the tertiary thumb key and other thumb keys are duplicated from the
+base layer to enable auto-repeat.
+
+
+#+NAME: funl
+| F12 | F7 | F8 | F9 | PSCR |
+| F11 | F4 | F5 | F6 | SLCK |
+| F10 | F1 | F2 | F3 | PAUS |
+| NP | NP | APP | SPC | TAB |
+
+
+*** COMMENT Templates
+
+#+NAME: tem
+| <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> | <l4> |
+|------+------+------+------+------+------+------+------+------+------|
+| | | | | | | | | | |
+| | | | | | | | | | |
+| | | | | | | | | | |
+| NP | NP | | | | | | | NP | NP |
+
+
+Duplicate base layer tap keys on thumbs rather than trans to enable auto-repeat.
+
+#+NAME: temr
+| <l4> | <l4> | <l4> | <l4> | <l4> |
+|------+------+------+------+------|
+| | | | | |
+| | | | | |
+| | | | | |
+| ENT | BSPC | DEL | NP | NP |
+
+#+NAME: teml
+| <l4> | <l4> | <l4> | <l4> | <l4> |
+|------+------+------+------+------|
+| | | | | |
+| | | | | |
+| | | | | |
+| NP | NP | ESC | SPC | TAB |
+
+
+* Code Generation
+:PROPERTIES:
+:CUSTOM_ID: code-generation
+:END:
+
+** Table Conversion Scripts
+
+*** table-layout-taphold
+
+Produce base layer from separate tap and hold tables.
+
+#+NAME: table-layout-taphold
+#+BEGIN_SRC python :var tap_table=tap :var hold_table=hold :var symbol_names_table=symbol-names :var mods_list=mods :tangle no :results verbatim
+width = 19
+mods_dict = dict.fromkeys(mods_list)
+symbol_names_dict = {}
+for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
+ symbol_names_dict[symbol] = name
+ symbol_names_dict[shifted_symbol] = shifted_name
+results = ' [BASE] = LAYOUT_miryoku(\n'
+for tap_row, hold_row in map(None, tap_table, hold_table):
+ results += ' '
+ for tap, hold in map(None, tap_row, hold_row):
+ if tap == '':
+ code = 'NU'
+ elif tap in symbol_names_dict:
+ code = symbol_names_dict[tap]
+ else:
+ code = tap
+ code = 'KC_' + str(code)
+ if hold in mods_dict:
+ code = str(hold) + '_T(' + code + ')'
+ elif hold != '' and hold != 'NP' and hold != 'RST':
+ code = 'LT(' + str(hold) + ', ' + code + ')'
+ results += (code + ', ').ljust(width)
+ results = results.rstrip(' ') + '\n'
+results = results.rstrip('\n, ') + '\n )'
+return results
+#+END_SRC
+
+#+RESULTS: table-layout-taphold
+: [BASE] = LAYOUT_miryoku(
+: KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT,
+: LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O),
+: KC_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH,
+: KC_NP, KC_NP, LT(MEDR, KC_ESC), LT(NAVR, KC_SPC), LT(MOUR, KC_TAB), LT(NSSL, KC_ENT), LT(NSL, KC_BSPC), LT(FUNL, KC_DEL), KC_NP, KC_NP
+: )
+
+
+*** table-layout-half
+
+Produce sub layers given layer name and corresponding table for single hand and
+incorporating mods and reset from base layer. Layer names must end with R or L.
+A layer with shifted symbols can also be generated.
+
+#+NAME: table-layout-half
+#+BEGIN_SRC python :var hold_table=hold :var layer_name="NSL" :var half_table=nsl :var symbol_names_table=symbol-names :var mods_list=mods :var shift="false" :tangle no :results verbatim
+width = 9
+mods_dict = dict.fromkeys(mods_list)
+symbol_names_dict = {}
+shifted_symbol_names_dict = {}
+for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
+ symbol_names_dict[symbol] = name
+ symbol_names_dict[shifted_symbol] = shifted_name
+ shifted_symbol_names_dict[symbol] = shifted_name
+length = len(half_table[0])
+mode = layer_name[-1:].lower()
+results = ' [' + layer_name + '] = LAYOUT_miryoku(\n'
+for half_row, hold_row in map(None, half_table, hold_table):
+ results += ' '
+ hold_row_l, hold_row_r = hold_row[:length], hold_row[length:]
+ for lr, hold_row_lr in ('l', hold_row_l), ('r', hold_row_r):
+ if lr == mode:
+ for half in half_row:
+ if half == '':
+ code = 'NU'
+ elif shift == "true" and half in shifted_symbol_names_dict:
+ code = shifted_symbol_names_dict[half]
+ elif half in symbol_names_dict:
+ code = symbol_names_dict[half]
+ else:
+ code = half
+ results += ('KC_' + str(code) + ', ').ljust(width)
+ else:
+ for hold in hold_row_lr:
+ if hold == '' or hold != 'NP' and hold != 'RST' and hold not in mods_dict:
+ code = 'NA'
+ else:
+ code = hold
+ results += ('KC_' + str(code) + ', ').ljust(width)
+ results = results.rstrip(' ') + '\n'
+results = results.rstrip('\n, ') + '\n )'
+return results
+#+END_SRC
+
+#+RESULTS: table-layout-half
+: [NSL] = LAYOUT_miryoku(
+: KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, KC_NA, KC_NA, KC_NA, KC_NA, KC_RST,
+: KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, KC_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
+: KC_GRV, KC_1, KC_2, KC_3, KC_BSLS, KC_NA, KC_NA, KC_NA, KC_NA, KC_NA,
+: KC_NP, KC_NP, KC_DOT, KC_0, KC_MINS, KC_NA, KC_NA, KC_NA, KC_NP, KC_NP
+: )
+
+
+*** table-enums
+
+Produce layer enums from layer names in hold table.
+
+#+NAME: table-enums
+#+BEGIN_SRC python :var hold_table=hold :var mods_list=mods :tangle no
+mods_dict = dict.fromkeys(mods_list)
+results = 'enum layers { BASE, '
+for hold_row in hold_table:
+ for hold in hold_row:
+ if hold not in mods_dict and hold != '' and hold != 'NP' and hold != 'RST':
+ results += hold + ', '
+results = results.rstrip(', ') + ' };'
+return results
+#+END_SRC
+
+#+RESULTS: table-enums
+: enum layers { BASE, MEDR, NAVR, MOUR, NSSL, NSL, FUNL };
+
+
+** Data
+
+*** symbol-names
+
+Symbol, name, and shifted symbol mappings for use in tables.
+
+#+NAME: symbol-names
+| ` | GRV | ~ | TILD |
+| - | MINS | _ | UNDS |
+| = | EQL | + | PLUS |
+| [ | LBRC | { | LCBR |
+| ] | RBRC | } | RCBR |
+| \ | BSLS | PIPE | PIPE |
+| ; | SCLN | : | COLN |
+| ' | QUOT | DQUO | DQUO |
+| , | COMM | < | LT |
+| . | DOT | > | GT |
+| / | SLSH | ? | QUES |
+| 1 | 1 | ! | EXLM |
+| 2 | 2 | @ | AT |
+| 3 | 3 | # | HASH |
+| 4 | 4 | $ | DLR |
+| 5 | 5 | % | PERC |
+| 6 | 6 | ^ | CIRC |
+| 7 | 7 | & | AMPR |
+| 8 | 8 | * | ASTR |
+| 9 | 9 | ( | LPRN |
+| 0 | 0 | ) | RPRN |
+
+
+*** mods
+
+Modifiers usable in hold table. Need to have the same name for KC_ and _T versions.
+
+#+NAME: mods
+- LSFT
+- LCTL
+- LALT
+- LGUI
+- LAGR
+
+
+** Other
+
+*** header
+
+Header for tangled src files.
+
+#+NAME: header
+#+BEGIN_SRC C :tangle no
+generated from users/manna-harbour_miryoku/miryoku.org
+#+END_SRC
+
+
+* Subset Mapping
+:PROPERTIES:
+:CUSTOM_ID: subset-mapping
+:END:
+
+** Userspace
+
+The keymap and configuration are shared between keyboards. The keymap is
+defined for LAYOUT_miryoku which is 10x4, with the outer 2 positions on the
+bottom row unused and the rest of the bottom row are the thumb keys.
+
+
+*** manna-harbour_miryoku.c
+
+Contains the keymap. Included from keymap.c
+
+[[./manna-harbour_miryoku.c][users/manna-harbour_miryoku/manna-harbour_miryoku.c]]
+#+BEGIN_SRC C :noweb yes :tangle manna-harbour_miryoku.c
+
+// <<header>>
+
+#include QMK_KEYBOARD_H
+
+#define KC_NP KC_NO // key is not present
+#define KC_NA KC_NO // present but not available for use
+#define KC_NU KC_NO // available but not used
+#define KC_RST RESET
+
+<<table-enums()>>
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+<<table-layout-taphold()>>,
+<<table-layout-half(layer_name="NAVR", half_table=navr)>>,
+<<table-layout-half(layer_name="MOUR", half_table=mour)>>,
+<<table-layout-half(layer_name="MEDR", half_table=medr)>>,
+<<table-layout-half(layer_name="FUNL", half_table=funl)>>,
+<<table-layout-half(layer_name="NSL", half_table=nsl)>>,
+<<table-layout-half(layer_name="NSSL", half_table=nsl, shift="true")>>
+};
+#+END_SRC
+
+
+*** config.h
+
+Config options. Automatically included.
+
+[[./config.h][users/manna-harbour_miryoku/config.h]]
+#+BEGIN_SRC C :noweb yes :tangle config.h
+
+// <<header>>
+
+#pragma once
+
+// Prevent normal rollover on alphas from accidentally triggering mods.
+#define IGNORE_MOD_TAP_INTERRUPT
+
+// Enable rapid switch from tap to hold, disables double tap hold auto-repeat.
+#define TAPPING_FORCE_HOLD
+
+// Recommended for heavy chording.
+#define QMK_KEYS_PER_SCAN 4
+
+#+END_SRC
+
+
+*** rules.mk
+
+Build options. Automatically included.
+
+[[./rules.mk][users/manna-harbour_miryoku/rules.mk]]
+#+BEGIN_SRC makefile :noweb yes :tangle rules.mk
+
+# <<header>>
+
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+
+#+END_SRC
+
+
+** Layouts
+
+To use the keymap on a keyboard supporting the layouts feature, LAYOUT_miryoku
+is defined as a macro mapping onto the layout's own LAYOUT macro, leaving the
+unused keys as KC_NO. The userspace keymap is then included.
+
+*** ergodox
+
+For the ergodox layout, the main 5x3 alphas are used as usual. The primary and
+secondary thumb keys are the inner and outer 2u thumb keys and the tertiary
+thumb key is the innermost key of the partial bottom row. The remaining keys
+are unused.
+
+[[../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c][layouts/community/ergodox/manna-harbour_miryoku/keymap.c]]
+#+BEGIN_SRC C :noweb yes :tangle ../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c
+
+// <<header>>
+
+#define LAYOUT_miryoku(\
+K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
+K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
+K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
+N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
+)\
+LAYOUT_ergodox_pretty( \
+KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
+KC_NO, K00, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, K09, KC_NO, \
+KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \
+KC_NO, K20, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K29, KC_NO, \
+KC_NO, KC_NO, KC_NO, KC_NO, K32, K37, KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_NO, KC_NO, \
+ K33, K34, KC_NO, KC_NO, K35, K36 \
+)
+
+#include "manna-harbour_miryoku.c"
+
+#+END_SRC
+
+To build for any keyboard using the this layout (ergodone, ergodox_ez,
+ergodox_infinity, hotdox) e.g. the ergodox_ez,
+
+#+BEGIN_SRC sh :tangle no
+cd ../.. && make ergodox_ez:manna-harbour_miryoku:teensy
+#+END_SRC
+
+
+
+*** ortho_4x12
+
+For the ortho_4x12 layout, the right half as is as follows: The rightmost column
+bottom 3 rows is the pinkie column. The middle 4 columns top 3 rows are for the
+remaining fingers. The bottom row left 3 columns are the thumb keys. The
+remaining keys are unused.
+
+[[../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c]]
+#+BEGIN_SRC C :noweb yes :tangle ../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c
+
+// <<header>>
+
+#define LAYOUT_miryoku(\
+K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\
+K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\
+K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\
+N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\
+)\
+LAYOUT_ortho_4x12(\
+KC_NO, K01, K02, K03, K04, KC_NO, KC_NO, K05, K06, K07, K08, KC_NO,\
+K00, K11, K12, K13, K14, KC_NO, KC_NO, K15, K16, K17, K18, K09,\
+K10, K21, K22, K23, K24, KC_NO, KC_NO, K25, K26, K27, K28, K19,\
+K20, KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO, K29\
+)
+
+#include "manna-harbour_miryoku.c"
+
+#+END_SRC
+
+To build for any keyboard using this layout (4x4, nori, chimera_ls, contra,
+divergetm2, jj40, lets_split, lets_split_eh, meira, niu_mini, planck, telophase,
+vitamins_included, zinc, zlant, ortho48, kbd4x, levinson, wavelet, plaid)
+e.g. the levinson,
+
+#+BEGIN_SRC sh :tangle no
+make keebio/levinson:manna-harbour_miryoku:avrdude
+#+END_SRC
+
+
+** Keyboards
+
+To use the keymap on a keyboard which does not support the layouts feature,
+LAYOUT_miryoku is defined as a macro mapping onto the keyboard's own LAYOUT
+macro, leaving the unused keys as KC_NO. The userspace keymap is then included.
+
+
+*** crkbd
+
+The outer columns are unused.
+
+[[../../keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c][keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c]]
+#+BEGIN_SRC C :noweb yes :tangle ../../keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c
+
+// <<header>>
+
+#define LAYOUT_miryoku( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
+ N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
+) \
+LAYOUT( \
+KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO, \
+KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \
+KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO, \
+ K32, K33, K34, K35, K36, K37 \
+)
+
+#include "manna-harbour_miryoku.c"
+
+#+END_SRC
+
+To build for this keyboard,
+
+#+BEGIN_SRC sh :tangle no
+cd ../.. && make crkbd:manna-harbour_miryoku:avrdude
+#+END_SRC
+
+
+* Related Documentation
+
+** QMK
+
+- https://qmk.fm/
+- https://docs.qmk.fm/#/getting_started_introduction
+- https://docs.qmk.fm/#/hardware_keyboard_guidelines
+- https://docs.qmk.fm/#/config_options
+- https://docs.qmk.fm/#/keycodes
+- https://docs.qmk.fm/#/feature_advanced_keycodes
+- https://docs.qmk.fm/#/feature_layouts
+- https://docs.qmk.fm/#/feature_userspace
+- https://docs.qmk.fm/#/getting_started_make_guide
+
+
+** Org Mode
+
+- https://orgmode.org/
+- https://orgmode.org/manual/Tables.html
+- https://orgmode.org/manual/Working-with-Source-Code.html
projects / qmk_firmware.git / commitdiff