## Flashing Instructions
-1) from the `qmk_firmware` directory run:
+*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do! _
+
+1) from the `qmk_firmware\` directory run:
```
-$ make tada68-default-bin
+$ make tada68-default-flashbin
```
-2) hit the reset button on the TADA, the lights will start flashing.
+2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
-5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
+5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!