#include "wait.h"
#endif
+#include "is31fl3733.h"
#include <string.h>
#include "i2c_master.h"
#include "progmem.h"
-#include "rgb_matrix.h"
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
#include "config_common.h"
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0258
-#define DEVICE_VER 0x0001
+#define VENDOR_ID 0x8968
+#define PRODUCT_ID 0x4853
+#define DEVICE_VER 0x0002
#define MANUFACTURER Yiancar-Designs
#define PRODUCT HS60 V2
#define DESCRIPTION GH60 compatible, tool free RGB keyboard
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 0
+#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
*/
//#define FORCE_NKRO
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
+/* Backlight options */
-/* disable debug print */
-//#define NO_DEBUG
+#define RGB_BACKLIGHT_ENABLED 1
-/* disable print */
-//#define NO_PRINT
+#define RGB_BACKLIGHT_HS60
-/* Backlight options */
+// they aren't really used if RGB_BACKLIGHT_HS60 defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
-#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
-#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
-#define RGB_MATRIX_SKIP_FRAMES 3
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
-#define DRIVER_ADDR_1 0b1010000
-#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
-#define DRIVER_COUNT 2
-#ifdef HS60_ANSI
-#define DRIVER_1_LED_TOTAL 61
-#else
-#define DRIVER_1_LED_TOTAL 62
-#endif
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
-#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 64
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Backlight config starts after EEPROM version
+#define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
+// Dynamic keymap starts after backlight config (35+31)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 66
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// Dynamic macro starts after dynamic keymaps (66+(4*5*14*2)) = (66+560)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 626
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 398
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16
/* Include overwrites for specific keymap */
#define HS60_ANSI
+#undef PRODUCT_ID
+#define PRODUCT_ID 0x4854
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
[1] = LAYOUT_60_ansi( /* FN */
- KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
- KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS,\
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS,\
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
+ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS,\
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS,\
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[2] = LAYOUT_60_ansi( /* Empty for dynamic keymaps */
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[3] = LAYOUT_60_ansi( /* Empty for dynamic keymaps */
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
};
void matrix_init_user(void) {
-The default keymap for ANSI HS60
-================================
+The default keymap for ANSI HS60 V2
+===================================
-
+
Default layer is normal ANSI and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) , KC_APP, KC_RCTL),
[1] = LAYOUT_60_iso( /* FN */
- KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , \
- KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_TRNS,\
KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[2] = LAYOUT_60_iso( /* Empty for dynamic keymaps */
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+[3] = LAYOUT_60_iso( /* Empty for dynamic keymaps */
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
};
void matrix_init_user(void) {
-The default keymap for ISO HS60
-===============================
+The default keymap for ISO HS60 V2
+==================================
-
+
Default layer is normal ISO and Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
/* Include overwrites for specific keymap */
#define HS60_HHKB
+#undef PRODUCT_ID
+#define PRODUCT_ID 0x4855
+
+#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_0
+#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_1
+#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_2
+#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_3
+#undef RGB_BACKLIGHT_ALPHAS_MODS_ROW_4
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_60_hhkb( /* Base */
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, \
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \
- KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ),
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,\
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,\
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),\
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ),
[1] = LAYOUT_60_hhkb( /* FN */
- RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,\
- KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_UP, KC_TRNS, KC_DEL, \
- KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS )
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,\
+ KC_TRNS, EF_DEC, EF_INC, H1_DEC, H1_INC, H2_DEC, H2_INC, BR_DEC, BR_INC, ES_DEC, ES_INC, KC_UP, KC_TRNS, KC_DEL, \
+ KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, \
+ KC_TRNS, KC_TRNS, S1_DEC, S1_INC, S2_DEC, S2_INC, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ),
+
+[2] = LAYOUT_60_hhkb( /* Empty for dynamic keymaps */
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ),
+
+[3] = LAYOUT_60_hhkb( /* Empty for dynamic keymaps */
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ),
};
void matrix_init_user(void) {
--- /dev/null
+The default keymap for HHKB HS60 V2
+===================================
+
+
+
+Default layer is normal HHKB with 7U space. Fn layer is used for RGB functions, Volume control and arrow cluster
\ No newline at end of file
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
-#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM4 TRUE
#define STM32_GPT_USE_TIM6 TRUE
#define STM32_GPT_USE_TIM7 TRUE
#define STM32_GPT_USE_TIM8 TRUE
# project specific files
+SRC = keyboards/zeal60/zeal60.c \
+ keyboards/zeal60/rgb_backlight.c \
+ drivers/issi/is31fl3733.c \
+ quantum/color.c \
+ drivers/arm/i2c_master.c
## chip/board settings
# the next two should match the directories in
# Build Options
# comment out to disable the options.
#
-BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
-AUDIO_ENABLE = no
-RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
+AUDIO_ENABLE = no # Audio output on port C6
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
#SERIAL_LINK_ENABLE = yes
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+CIE1931_CURVE = yes
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "v2.h"
-
-//#include "is31fl3733.h"
-
-// Please ignore this is for upcoming features
-/*#ifdef RAW_ENABLE
-
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
- uint8_t command = data[0];
- switch ( command )
- {
- case id_protocol_version:
- {
- msg_protocol_version *msg = (msg_protocol_version*)&data[1];
- msg->version = PROTOCOL_VERSION;
- break;
- }
-#if USE_KEYMAPS_IN_EEPROM
- case id_keymap_keycode_load:
- {
- msg_keymap_keycode_load *msg = (msg_keymap_keycode_load*)&data[1];
- msg->keycode = keymap_keycode_load( msg->layer, msg->row, msg->column );
- break;
- }
- case id_keymap_keycode_save:
- {
- msg_keymap_keycode_save *msg = (msg_keymap_keycode_save*)&data[1];
- keymap_keycode_save( msg->layer, msg->row, msg->column, msg->keycode);
- break;
- }
- case id_keymap_default_save:
- {
- keymap_default_save();
- break;
- }
-#endif // USE_KEYMAPS_IN_EEPROM
- case id_backlight_config_set_values:
- {
- msg_backlight_config_set_values *msg = (msg_backlight_config_set_values*)&data[1];
- backlight_config_set_values(msg);
- backlight_config_save();
- break;
- }
- case id_backlight_config_set_alphas_mods:
- {
- msg_backlight_config_set_alphas_mods *msg = (msg_backlight_config_set_alphas_mods*)&data[1];
- backlight_config_set_alphas_mods( msg->alphas_mods );
- backlight_config_save();
- break;
- }
- case id_backlight_set_key_color:
- {
- msg_backlight_set_key_color *msg = (msg_backlight_set_key_color*)&data[1];
- backlight_set_key_color(msg->row, msg->column, msg->hsv);
- break;
- }
- case id_system_get_state:
- {
- msg_system_state *msg = (msg_system_state*)&data[1];
- msg->value = backlight_get_tick();
- break;
- }
- default:
- {
- // Unhandled message.
- data[0] = id_unhandled;
- break;
- }
- }
-
- // Return same buffer with values changed
- raw_hid_send( data, length );
-
-}
-
-#endif*/
-
-#ifdef HS60_ANSI
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, B_1, A_1, C_1}, //MX1
- {0, E_1, D_1, F_1}, //MX2
- {0, H_1, G_1, I_1}, //MX3
- {0, K_1, J_1, L_1}, //MX4
- {0, B_2, A_2, C_2}, //MX6
- {0, E_2, D_2, F_2}, //MX7
- {0, H_2, G_2, I_2}, //MX8
- {0, K_2, J_2, L_2}, //MX14
- {0, B_3, A_3, C_3}, //MX11
- {0, E_3, D_3, F_3}, //MX12
- {0, H_3, G_3, I_3}, //MX13
- {0, K_3, J_3, L_3}, //MX19
- {0, B_4, A_4, C_4}, //MX16
- {0, E_4, D_4, F_4}, //MX17
- {0, H_4, G_4, I_4}, //MX18
- {0, K_4, J_4, L_4}, //MX23
- {0, B_5, A_5, C_5}, //MX20
- {0, E_5, D_5, F_5}, //MX21
- {0, H_5, G_5, I_5}, //MX22
- {0, K_5, J_5, L_5}, //MX27
- {0, B_6, A_6, C_6}, //MX24
- {0, E_6, D_6, F_6}, //MX25
- {0, H_6, G_6, I_6}, //MX26
- {0, K_6, J_6, L_6}, //MX31
- {0, B_7, A_7, C_7}, //MX28
- {0, E_7, D_7, F_7}, //MX29
- {0, H_7, G_7, I_7}, //MX30
- {0, K_7, J_7, L_7}, //MX36
- {0, B_8, A_8, C_8}, //MX33
- {0, E_8, D_8, F_8}, //MX34
- {0, H_8, G_8, I_8}, //MX35
- {0, K_8, J_8, L_8}, //MX40
- {0, B_9, A_9, C_9}, //MX37
- {0, E_9, D_9, F_9}, //MX38
- {0, H_9, G_9, I_9}, //MX39
- {0, K_9, J_9, L_9}, //MX44
- {0, B_10, A_10, C_10}, //MX41
- {0, E_10, D_10, F_10}, //MX42
- {0, H_10, G_10, I_10}, //MX43
- {0, K_10, J_10, L_10}, //MX48
- {0, B_11, A_11, C_11}, //MX45
- {0, E_11, D_11, F_11}, //MX46
- {0, H_11, G_11, I_11}, //MX47
- {0, K_11, J_11, L_11}, //MX53
- {0, B_12, A_12, C_12}, //MX50
- {0, E_12, D_12, F_12}, //MX51
- {0, H_12, G_12, I_12}, //MX52
-
- {0, B_13, A_13, C_13}, //MX55
- {0, E_13, D_13, F_13}, //MX56
-
- {0, K_13, J_13, L_13}, //MX61
- {0, B_14, A_14, C_14}, //MX59
- {0, E_14, D_14, F_14}, //MX57
- {0, H_14, G_14, I_14}, //MX60
- {0, K_14, J_14, L_14}, //MX62
- {0, B_15, A_15, C_15}, //MX5
- {0, E_15, D_15, F_15}, //MX10
- {0, H_15, G_15, I_15}, //MX15
- {0, K_15, J_15, L_15}, //MX32
-
- {0, E_16, D_16, F_16}, //MX49
- {0, H_16, G_16, I_16}, //MX54
- {0, K_16, J_16, L_16}, //MX58
-};
-
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-//
-// MX1, MX6, MX11, MX16, MX20, MX24, MX28, MX33, MX37, MX41, MX45, MX50, MX55, MX59,
-// MX2, MX7, MX12, MX17, MX21, MX25, MX29, MX34, MX38, MX42, MX46, MX51, MX56, ---,
-// MX3, MX8, MX13, MX18, MX22, MX26, MX30, MX35, MX39, MX43, MX47, MX52, MX57, MX60,
-// MX4, ---, MX14, MX19, MX23, MX27, MX31, MX36, MX40, MX44, MX48, MX53, ---, MX61,
-// MX5, MX10, MX15, ---, ---, ---, MX32, ---, ---, ---, MX49, MX54, MX58, MX62
-/* {row | col << 4}
- * | {x=0..224, y=0..64}
- * | | modifier
- * | | | */
- {{0|(0<<4)}, { 0, 0}, 1}, //MX1
- {{1|(0<<4)}, { 0, 16}, 1}, //MX2
- {{2|(0<<4)}, { 0, 32}, 1}, //MX3
- {{3|(0<<4)}, { 0, 48}, 1}, //MX4
- {{0|(1<<4)}, { 17, 0}, 0}, //MX6
- {{1|(1<<4)}, { 17, 16}, 0}, //MX7
- {{2|(1<<4)}, { 17, 32}, 0}, //MX8
- {{3|(2<<4)}, { 34, 48}, 0}, //MX14
- {{0|(2<<4)}, { 34, 0}, 0}, //MX11
- {{1|(2<<4)}, { 34, 16}, 0}, //MX12
- {{2|(2<<4)}, { 34, 32}, 0}, //MX13
- {{3|(3<<4)}, { 51, 48}, 0}, //MX19
- {{0|(3<<4)}, { 51, 0}, 0}, //MX16
- {{1|(3<<4)}, { 51, 16}, 0}, //MX17
- {{2|(3<<4)}, { 51, 32}, 0}, //MX18
- {{3|(4<<4)}, { 68, 48}, 0}, //MX23
- {{0|(4<<4)}, { 68, 0}, 0}, //MX20
- {{1|(4<<4)}, { 68, 16}, 0}, //MX21
- {{2|(4<<4)}, { 68, 32}, 0}, //MX22
- {{3|(5<<4)}, { 85, 48}, 0}, //MX27
- {{0|(5<<4)}, { 85, 0}, 0}, //MX24
- {{1|(5<<4)}, { 85, 16}, 0}, //MX25
- {{2|(5<<4)}, { 85, 32}, 0}, //MX26
- {{3|(6<<4)}, {102, 48}, 0}, //MX31
- {{0|(6<<4)}, {102, 0}, 0}, //MX28
- {{1|(6<<4)}, {102, 16}, 0}, //MX29
- {{2|(6<<4)}, {102, 32}, 0}, //MX30
- {{3|(7<<4)}, {119, 48}, 0}, //MX36
- {{0|(7<<4)}, {119, 0}, 0}, //MX33
- {{1|(7<<4)}, {119, 16}, 0}, //MX34
- {{2|(7<<4)}, {119, 32}, 0}, //MX35
- {{3|(8<<4)}, {136, 48}, 0}, //MX40
- {{0|(8<<4)}, {136, 0}, 0}, //MX37
- {{1|(8<<4)}, {136, 16}, 0}, //MX38
- {{2|(8<<4)}, {136, 32}, 0}, //MX39
- {{3|(9<<4)}, {153, 48}, 0}, //MX44
- {{0|(9<<4)}, {153, 0}, 0}, //MX41
- {{1|(9<<4)}, {153, 16}, 0}, //MX42
- {{2|(9<<4)}, {153, 32}, 0}, //MX43
- {{3|(10<<4)}, {170, 48}, 0}, //MX48
- {{0|(10<<4)}, {170, 0}, 0}, //MX45
- {{1|(10<<4)}, {170, 16}, 0}, //MX46
- {{2|(10<<4)}, {170, 32}, 0}, //MX47
- {{3|(11<<4)}, {187, 48}, 0}, //MX53
- {{0|(11<<4)}, {187, 0}, 0}, //MX50
- {{1|(11<<4)}, {187, 16}, 0}, //MX51
- {{2|(11<<4)}, {187, 32}, 0}, //MX52
-
- {{0|(12<<4)}, {204, 0}, 0}, //MX55
- {{1|(12<<4)}, {204, 16}, 0}, //MX56
-
- {{3|(13<<4)}, {221, 48}, 1}, //MX61
- {{0|(13<<4)}, {221, 0}, 1}, //MX59
- {{2|(12<<4)}, {221, 16}, 0}, //MX57
- {{2|(13<<4)}, {221, 32}, 1}, //MX60
- {{4|(13<<4)}, {221, 64}, 1}, //MX62
- {{4|(0<<4)}, { 0, 64}, 1}, //MX5
- {{4|(1<<4)}, { 17, 64}, 1}, //MX10
- {{4|(2<<4)}, { 34, 64}, 1}, //MX15
- {{4|(5<<4)}, {102, 64}, 0}, //MX32
-
- {{4|(10<<4)}, {170, 64}, 1}, //MX49
- {{4|(11<<4)}, {187, 64}, 1}, //MX54
- {{4|(12<<4)}, {204, 64}, 1} //MX58
-};
-
-#elif defined(HS60_HHKB)
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, B_1, A_1, C_1}, //MX1
- {0, E_1, D_1, F_1}, //MX2
- {0, H_1, G_1, I_1}, //MX3
- {0, K_1, J_1, L_1}, //MX4
- {0, B_2, A_2, C_2}, //MX6
- {0, E_2, D_2, F_2}, //MX7
- {0, H_2, G_2, I_2}, //MX8
- {0, K_2, J_2, L_2}, //MX14
- {0, B_3, A_3, C_3}, //MX11
- {0, E_3, D_3, F_3}, //MX12
- {0, H_3, G_3, I_3}, //MX13
- {0, K_3, J_3, L_3}, //MX19
- {0, B_4, A_4, C_4}, //MX16
- {0, E_4, D_4, F_4}, //MX17
- {0, H_4, G_4, I_4}, //MX18
- {0, K_4, J_4, L_4}, //MX23
- {0, B_5, A_5, C_5}, //MX20
- {0, E_5, D_5, F_5}, //MX21
- {0, H_5, G_5, I_5}, //MX22
- {0, K_5, J_5, L_5}, //MX27
- {0, B_6, A_6, C_6}, //MX24
- {0, E_6, D_6, F_6}, //MX25
- {0, H_6, G_6, I_6}, //MX26
- {0, K_6, J_6, L_6}, //MX31
- {0, B_7, A_7, C_7}, //MX28
- {0, E_7, D_7, F_7}, //MX29
- {0, H_7, G_7, I_7}, //MX30
- {0, K_7, J_7, L_7}, //MX36
- {0, B_8, A_8, C_8}, //MX33
- {0, E_8, D_8, F_8}, //MX34
- {0, H_8, G_8, I_8}, //MX35
- {0, K_8, J_8, L_8}, //MX40
- {0, B_9, A_9, C_9}, //MX37
- {0, E_9, D_9, F_9}, //MX38
- {0, H_9, G_9, I_9}, //MX39
- {0, K_9, J_9, L_9}, //MX44
- {0, B_10, A_10, C_10}, //MX41
- {0, E_10, D_10, F_10}, //MX42
- {0, H_10, G_10, I_10}, //MX43
- {0, K_10, J_10, L_10}, //MX48
- {0, B_11, A_11, C_11}, //MX45
- {0, E_11, D_11, F_11}, //MX46
- {0, H_11, G_11, I_11}, //MX47
- {0, K_11, J_11, L_11}, //MX53
- {0, B_12, A_12, C_12}, //MX50
- {0, E_12, D_12, F_12}, //MX51
- {0, H_12, G_12, I_12}, //MX52
- {0, K_12, J_12, L_12}, //MX64
- {0, B_13, A_13, C_13}, //MX55
- {0, E_13, D_13, F_13}, //MX56
- {0, H_13, G_13, I_13}, //MX63
- {0, K_13, J_13, L_13}, //MX61
- {0, B_14, A_14, C_14}, //MX59
- {0, E_14, D_14, F_14}, //MX57
- {0, H_14, G_14, I_14}, //MX60
- {0, K_14, J_14, L_14}, //MX62
- {0, B_15, A_15, C_15}, //MX5
- {0, E_15, D_15, F_15}, //MX10
- {0, H_15, G_15, I_15}, //MX15
- {0, K_15, J_15, L_15}, //MX32
-
-
- {0, H_16, G_16, I_16}, //MX54
- {0, K_16, J_16, L_16}, //MX58
-};
-
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-//
-// MX1, MX6, MX11, MX16, MX20, MX24, MX28, MX33, MX37, MX41, MX45, MX50, MX55, MX59,
-// MX2, MX7, MX12, MX17, MX21, MX25, MX29, MX34, MX38, MX42, MX46, MX51, MX56, MX64,
-// MX3, MX8, MX13, MX18, MX22, MX26, MX30, MX35, MX39, MX43, MX47, MX52, MX57, MX60,
-// MX4, ----, MX14, MX19, MX23, MX27, MX31, MX36, MX40, MX44, MX48, MX53, MX63, MX61,
-// MX5, MX10, MX15, ----, ----, ----, MX32, ----, ---, ----, ----, MX54, MX58, MX62
-/* {row | col << 4}
- * | {x=0..224, y=0..64}
- * | | modifier
- * | | | */
- {{0|(0<<4)}, { 0, 0}, 1}, //MX1
- {{1|(0<<4)}, { 0, 16}, 1}, //MX2
- {{2|(0<<4)}, { 0, 32}, 1}, //MX3
- {{3|(0<<4)}, { 0, 48}, 1}, //MX4
- {{0|(1<<4)}, { 17, 0}, 0}, //MX6
- {{1|(1<<4)}, { 17, 16}, 0}, //MX7
- {{2|(1<<4)}, { 17, 32}, 0}, //MX8
- {{3|(2<<4)}, { 34, 48}, 0}, //MX14
- {{0|(2<<4)}, { 34, 0}, 0}, //MX11
- {{1|(2<<4)}, { 34, 16}, 0}, //MX12
- {{2|(2<<4)}, { 34, 32}, 0}, //MX13
- {{3|(3<<4)}, { 51, 48}, 0}, //MX19
- {{0|(3<<4)}, { 51, 0}, 0}, //MX16
- {{1|(3<<4)}, { 51, 16}, 0}, //MX17
- {{2|(3<<4)}, { 51, 32}, 0}, //MX18
- {{3|(4<<4)}, { 68, 48}, 0}, //MX23
- {{0|(4<<4)}, { 68, 0}, 0}, //MX20
- {{1|(4<<4)}, { 68, 16}, 0}, //MX21
- {{2|(4<<4)}, { 68, 32}, 0}, //MX22
- {{3|(5<<4)}, { 85, 48}, 0}, //MX27
- {{0|(5<<4)}, { 85, 0}, 0}, //MX24
- {{1|(5<<4)}, { 85, 16}, 0}, //MX25
- {{2|(5<<4)}, { 85, 32}, 0}, //MX26
- {{3|(6<<4)}, {102, 48}, 0}, //MX31
- {{0|(6<<4)}, {102, 0}, 0}, //MX28
- {{1|(6<<4)}, {102, 16}, 0}, //MX29
- {{2|(6<<4)}, {102, 32}, 0}, //MX30
- {{3|(7<<4)}, {119, 48}, 0}, //MX36
- {{0|(7<<4)}, {119, 0}, 0}, //MX33
- {{1|(7<<4)}, {119, 16}, 0}, //MX34
- {{2|(7<<4)}, {119, 32}, 0}, //MX35
- {{3|(8<<4)}, {136, 48}, 0}, //MX40
- {{0|(8<<4)}, {136, 0}, 0}, //MX37
- {{1|(8<<4)}, {136, 16}, 0}, //MX38
- {{2|(8<<4)}, {136, 32}, 0}, //MX39
- {{3|(9<<4)}, {153, 48}, 0}, //MX44
- {{0|(9<<4)}, {153, 0}, 0}, //MX41
- {{1|(9<<4)}, {153, 16}, 0}, //MX42
- {{2|(9<<4)}, {153, 32}, 0}, //MX43
- {{3|(10<<4)}, {170, 48}, 0}, //MX48
- {{0|(10<<4)}, {170, 0}, 0}, //MX45
- {{1|(10<<4)}, {170, 16}, 0}, //MX46
- {{2|(10<<4)}, {170, 32}, 0}, //MX47
- {{3|(11<<4)}, {187, 48}, 0}, //MX53
- {{0|(11<<4)}, {187, 0}, 0}, //MX50
- {{1|(11<<4)}, {187, 16}, 0}, //MX51
- {{2|(11<<4)}, {187, 32}, 0}, //MX52
- {{1|(13<<4)}, {221, 0}, 1}, //MX64
- {{0|(12<<4)}, {204, 0}, 0}, //MX55
- {{1|(12<<4)}, {204, 16}, 0}, //MX56
- {{3|(12<<4)}, {204, 48}, 0}, //MX63
- {{3|(13<<4)}, {212, 48}, 1}, //MX61
- {{0|(13<<4)}, {221, 0}, 0}, //MX59
- {{2|(12<<4)}, {221, 16}, 0}, //MX57
- {{2|(13<<4)}, {221, 32}, 1}, //MX60
- {{4|(13<<4)}, {221, 64}, 1}, //MX62
- {{4|(0<<4)}, { 0, 64}, 1}, //MX5
- {{4|(1<<4)}, { 17, 64}, 1}, //MX10
- {{4|(2<<4)}, { 34, 64}, 1}, //MX15
- {{4|(5<<4)}, {102, 64}, 0}, //MX32
-
-
- {{4|(11<<4)}, {187, 64}, 1}, //MX54
- {{4|(12<<4)}, {204, 64}, 1} //MX58
-};
-
-#else //ISO layout
-
-const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
-/* Refer to IS31 manual for these locations
- * driver
- * | R location
- * | | G location
- * | | | B location
- * | | | | */
- {0, B_1, A_1, C_1}, //MX1
- {0, E_1, D_1, F_1}, //MX2
- {0, H_1, G_1, I_1}, //MX3
- {0, K_1, J_1, L_1}, //MX4
- {0, B_2, A_2, C_2}, //MX6
- {0, E_2, D_2, F_2}, //MX7
- {0, H_2, G_2, I_2}, //MX8
- {0, K_2, J_2, L_2}, //MX14
- {0, B_3, A_3, C_3}, //MX11
- {0, E_3, D_3, F_3}, //MX12
- {0, H_3, G_3, I_3}, //MX13
- {0, K_3, J_3, L_3}, //MX19
- {0, B_4, A_4, C_4}, //MX16
- {0, E_4, D_4, F_4}, //MX17
- {0, H_4, G_4, I_4}, //MX18
- {0, K_4, J_4, L_4}, //MX23
- {0, B_5, A_5, C_5}, //MX20
- {0, E_5, D_5, F_5}, //MX21
- {0, H_5, G_5, I_5}, //MX22
- {0, K_5, J_5, L_5}, //MX27
- {0, B_6, A_6, C_6}, //MX24
- {0, E_6, D_6, F_6}, //MX25
- {0, H_6, G_6, I_6}, //MX26
- {0, K_6, J_6, L_6}, //MX31
- {0, B_7, A_7, C_7}, //MX28
- {0, E_7, D_7, F_7}, //MX29
- {0, H_7, G_7, I_7}, //MX30
- {0, K_7, J_7, L_7}, //MX36
- {0, B_8, A_8, C_8}, //MX33
- {0, E_8, D_8, F_8}, //MX34
- {0, H_8, G_8, I_8}, //MX35
- {0, K_8, J_8, L_8}, //MX40
- {0, B_9, A_9, C_9}, //MX37
- {0, E_9, D_9, F_9}, //MX38
- {0, H_9, G_9, I_9}, //MX39
- {0, K_9, J_9, L_9}, //MX44
- {0, B_10, A_10, C_10}, //MX41
- {0, E_10, D_10, F_10}, //MX42
- {0, H_10, G_10, I_10}, //MX43
- {0, K_10, J_10, L_10}, //MX48
- {0, B_11, A_11, C_11}, //MX45
- {0, E_11, D_11, F_11}, //MX46
- {0, H_11, G_11, I_11}, //MX47
- {0, K_11, J_11, L_11}, //MX53
- {0, B_12, A_12, C_12}, //MX50
- {0, E_12, D_12, F_12}, //MX51
- {0, H_12, G_12, I_12}, //MX52
- {0, K_12, J_12, L_12}, //MX9
- {0, B_13, A_13, C_13}, //MX55
- {0, E_13, D_13, F_13}, //MX56
-
- {0, K_13, J_13, L_13}, //MX61
- {0, B_14, A_14, C_14}, //MX59
- {0, E_14, D_14, F_14}, //MX57
- {0, H_14, G_14, I_14}, //MX60
- {0, K_14, J_14, L_14}, //MX62
- {0, B_15, A_15, C_15}, //MX5
- {0, E_15, D_15, F_15}, //MX10
- {0, H_15, G_15, I_15}, //MX15
- {0, K_15, J_15, L_15}, //MX32
-
- {0, E_16, D_16, F_16}, //MX49
- {0, H_16, G_16, I_16}, //MX54
- {0, K_16, J_16, L_16}, //MX58
-};
-
-const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
-//
-// MX1, MX6, MX11, MX16, MX20, MX24, MX28, MX33, MX37, MX41, MX45, MX50, MX55, MX59,
-// MX2, MX7, MX12, MX17, MX21, MX25, MX29, MX34, MX38, MX42, MX46, MX51, MX56, ---,
-// MX3, MX8, MX13, MX18, MX22, MX26, MX30, MX35, MX39, MX43, MX47, MX52, MX57, MX60,
-// MX4, ---, MX14, MX19, MX23, MX27, MX31, MX36, MX40, MX44, MX48, MX53, ---, MX61,
-// MX5, MX10, MX15, ---, ---, ---, MX32, ---, ---, ---, MX49, MX54, MX58, MX62
-/* {row | col << 4}
- * | {x=0..224, y=0..64}
- * | | modifier
- * | | | */
- {{0|(0<<4)}, { 0, 0}, 1}, //MX1
- {{1|(0<<4)}, { 0, 16}, 1}, //MX2
- {{2|(0<<4)}, { 0, 32}, 1}, //MX3
- {{3|(0<<4)}, { 0, 48}, 1}, //MX4
- {{0|(1<<4)}, { 17, 0}, 0}, //MX6
- {{1|(1<<4)}, { 17, 16}, 0}, //MX7
- {{2|(1<<4)}, { 17, 32}, 0}, //MX8
- {{3|(2<<4)}, { 34, 48}, 0}, //MX14
- {{0|(2<<4)}, { 34, 0}, 0}, //MX11
- {{1|(2<<4)}, { 34, 16}, 0}, //MX12
- {{2|(2<<4)}, { 34, 32}, 0}, //MX13
- {{3|(3<<4)}, { 51, 48}, 0}, //MX19
- {{0|(3<<4)}, { 51, 0}, 0}, //MX16
- {{1|(3<<4)}, { 51, 16}, 0}, //MX17
- {{2|(3<<4)}, { 51, 32}, 0}, //MX18
- {{3|(4<<4)}, { 68, 48}, 0}, //MX23
- {{0|(4<<4)}, { 68, 0}, 0}, //MX20
- {{1|(4<<4)}, { 68, 16}, 0}, //MX21
- {{2|(4<<4)}, { 68, 32}, 0}, //MX22
- {{3|(5<<4)}, { 85, 48}, 0}, //MX27
- {{0|(5<<4)}, { 85, 0}, 0}, //MX24
- {{1|(5<<4)}, { 85, 16}, 0}, //MX25
- {{2|(5<<4)}, { 85, 32}, 0}, //MX26
- {{3|(6<<4)}, {102, 48}, 0}, //MX31
- {{0|(6<<4)}, {102, 0}, 0}, //MX28
- {{1|(6<<4)}, {102, 16}, 0}, //MX29
- {{2|(6<<4)}, {102, 32}, 0}, //MX30
- {{3|(7<<4)}, {119, 48}, 0}, //MX36
- {{0|(7<<4)}, {119, 0}, 0}, //MX33
- {{1|(7<<4)}, {119, 16}, 0}, //MX34
- {{2|(7<<4)}, {119, 32}, 0}, //MX35
- {{3|(8<<4)}, {136, 48}, 0}, //MX40
- {{0|(8<<4)}, {136, 0}, 0}, //MX37
- {{1|(8<<4)}, {136, 16}, 0}, //MX38
- {{2|(8<<4)}, {136, 32}, 0}, //MX39
- {{3|(9<<4)}, {153, 48}, 0}, //MX44
- {{0|(9<<4)}, {153, 0}, 0}, //MX41
- {{1|(9<<4)}, {153, 16}, 0}, //MX42
- {{2|(9<<4)}, {153, 32}, 0}, //MX43
- {{3|(10<<4)}, {170, 48}, 0}, //MX48
- {{0|(10<<4)}, {170, 0}, 0}, //MX45
- {{1|(10<<4)}, {170, 16}, 0}, //MX46
- {{2|(10<<4)}, {170, 32}, 0}, //MX47
- {{3|(11<<4)}, {187, 48}, 0}, //MX53
- {{0|(11<<4)}, {187, 0}, 0}, //MX50
- {{1|(11<<4)}, {187, 16}, 0}, //MX51
- {{2|(11<<4)}, {187, 32}, 0}, //MX52
- {{3|(2<<4)}, { 17, 32}, 1}, //MX9
- {{0|(12<<4)}, {204, 0}, 0}, //MX55
- {{1|(12<<4)}, {204, 16}, 0}, //MX56
-
- {{3|(13<<4)}, {221, 48}, 1}, //MX61
- {{0|(13<<4)}, {221, 0}, 1}, //MX59
- {{2|(12<<4)}, {204, 32}, 0}, //MX57
- {{2|(13<<4)}, {221, 24}, 1}, //MX60
- {{4|(13<<4)}, {221, 64}, 1}, //MX62
- {{4|(0<<4)}, { 0, 64}, 1}, //MX5
- {{4|(1<<4)}, { 17, 64}, 1}, //MX10
- {{4|(2<<4)}, { 34, 64}, 1}, //MX15
- {{4|(5<<4)}, {102, 64}, 0}, //MX32
-
- {{4|(10<<4)}, {170, 64}, 1}, //MX49
- {{4|(11<<4)}, {187, 64}, 1}, //MX54
- {{4|(12<<4)}, {204, 64}, 1} //MX58
-};
-
+#ifndef RGB_BACKLIGHT_HS60
+#error RGB_BACKLIGHT_M60_A not defined, recheck config.h
#endif
-
-void bootmagic_lite(void)
-{
- // The lite version of TMK's bootmagic made by Wilba.
- // 100% less potential for accidentally making the
- // keyboard do stupid things.
-
- // We need multiple scans because debouncing can't be turned off.
- matrix_scan();
- wait_ms(10);
- matrix_scan();
-
- // If the Esc and space bar are held down on power up,
- // reset the EEPROM valid state and jump to bootloader.
- // Assumes Esc is at [0,0] and spacebar is at [4,6].
- // This isn't very generalized, but we need something that doesn't
- // rely on user's keymaps in firmware or EEPROM.
- if ( ( matrix_get_row(0) & (1<<0) ) &&
- ( matrix_get_row(4) & (1<<6) ) )
- {
- // Set the TMK/QMK EEPROM state as invalid.
- eeconfig_disable();
- //eeprom_set_valid(false);
- // Jump to bootloader.
- bootloader_jump();
- }
-}
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- bootmagic_lite();
-
- // Please ignore this is for upcoming features
- // If the EEPROM has the magic, the data is good.
- // OK to load from EEPROM.
- /*if (eeprom_is_valid())
- {
- backlight_config_load();
-
- // TODO: do something to "turn on" keymaps in EEPROM?
- }
- else
- {
- // If the EEPROM has not been saved before, or is out of date,
- // save the default values to the EEPROM. Default values
- // come from construction of the zeal_backlight_config instance.
- backlight_config_save();
-
- // Clear the LED colors stored in EEPROM
- for ( int row=0; row < MATRIX_ROWS; row++ )
- {
- HSV hsv;
- for ( int column=0; column < MATRIX_COLS; column++ )
- {
- hsv.h = rand() & 0xFF;
- hsv.s = rand() & 0x7F;
- hsv.v = 255;
- backlight_set_key_color( row, column, hsv );
- }
- }
- #ifdef USE_KEYMAPS_IN_EEPROM
- keymap_default_save();
- #endif
- // Save the magic number last, in case saving was interrupted
- eeprom_set_valid(true);
- }*/
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- //backlight_set_indicator_state(usb_led);
-}
\ No newline at end of file
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#ifndef HS60_H
-#define HS60_H
+#pragma once
#define XXX KC_NO
#include "quantum.h"
+#include "../../zeal60/rgb_backlight_keycodes.h"
+#include "../../zeal60/zeal60_keycodes.h"
// This a shortcut to help you visually see your layout.
{ K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
{ K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, XXX, K4B, K4C, K4D } \
}
-
-#endif
\ No newline at end of file
*/
#if RGB_BACKLIGHT_ENABLED
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU)
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60)
#else
#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU
#endif
+#ifndef MAX
+ #define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
+#endif
+
+#ifndef MIN
+ #define MIN(a,b) ((a) < (b)? (a): (b))
+#endif
+
#include "quantum.h"
#include "rgb_backlight.h"
#include "rgb_backlight_api.h"
#include "rgb_backlight_keycodes.h"
+#if !defined(RGB_BACKLIGHT_HS60)
#include <avr/io.h>
#include <util/delay.h>
#include <avr/interrupt.h>
+#include "drivers/avr/i2c_master.h"
+#else
+#include "ch.h"
+#include "hal.h"
+#include "drivers/arm/i2c_master.h"
+#include "tmk_core/common/eeprom.h"
+#endif
#include "progmem.h"
-
#include "quantum/color.h"
-#include "drivers/avr/i2c_master.h"
#if defined (RGB_BACKLIGHT_M6_B)
#include "drivers/issi/is31fl3218.h"
#define BACKLIGHT_LED_COUNT 6
+#elif defined (RGB_BACKLIGHT_HS60)
+#include "drivers/issi/is31fl3733.h"
+#define BACKLIGHT_LED_COUNT 64
#else
#include "drivers/issi/is31fl3731.h"
#define BACKLIGHT_LED_COUNT 72
// Ticks since any key was last hit.
uint32_t g_any_key_hit = 0;
-#if !defined(RGB_BACKLIGHT_M6_B)
+#if defined(RGB_BACKLIGHT_HS60)
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// ADDR_2 is not needed. it is here as a dummy
+#define ISSI_ADDR_1 0x50
+#define ISSI_ADDR_2 0x50
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //LA1
+ {0, E_1, D_1, F_1}, //LA2
+ {0, H_1, G_1, I_1}, //LA3
+ {0, K_1, J_1, L_1}, //LA4
+ {0, B_2, A_2, C_2}, //LA5
+ {0, E_2, D_2, F_2}, //LA6
+ {0, H_2, G_2, I_2}, //LA7
+ {0, K_2, J_2, L_2}, //LA8
+ {0, B_3, A_3, C_3}, //LA9
+ {0, E_3, D_3, F_3}, //LA10
+ {0, H_3, G_3, I_3}, //LA11
+ {0, K_3, J_3, L_3}, //LA12
+ {0, B_4, A_4, C_4}, //LA13
+ {0, E_4, D_4, F_4}, //LA14
+ {0, H_4, G_4, I_4}, //LA15
+ {0, K_4, J_4, L_4}, //LA16
+ {0, B_5, A_5, C_5}, //LA17
+ {0, E_5, D_5, F_5}, //LA18
+ {0, H_5, G_5, I_5}, //LA19
+ {0, K_5, J_5, L_5}, //LA20
+ {0, B_6, A_6, C_6}, //LA21
+ {0, E_6, D_6, F_6}, //LA22
+ {0, H_6, G_6, I_6}, //LA23
+ {0, K_6, J_6, L_6}, //LA24
+ {0, B_7, A_7, C_7}, //LA25
+ {0, E_7, D_7, F_7}, //LA26
+ {0, H_7, G_7, I_7}, //LA27
+ {0, K_7, J_7, L_7}, //LA28
+ {0, B_8, A_8, C_8}, //LA29
+ {0, E_8, D_8, F_8}, //LA30
+ {0, H_8, G_8, I_8}, //LA31
+ {0, K_8, J_8, L_8}, //LA32
+ {0, B_9, A_9, C_9}, //LA33
+ {0, E_9, D_9, F_9}, //LA34
+ {0, H_9, G_9, I_9}, //LA35
+ {0, K_9, J_9, L_9}, //LA36
+ {0, B_10, A_10, C_10}, //LA37
+ {0, E_10, D_10, F_10}, //LA38
+ {0, H_10, G_10, I_10}, //LA39
+ {0, K_10, J_10, L_10}, //LA40
+ {0, B_11, A_11, C_11}, //LA41
+ {0, E_11, D_11, F_11}, //LA42
+ {0, H_11, G_11, I_11}, //LA43
+ {0, K_11, J_11, L_11}, //LA44
+ {0, B_12, A_12, C_12}, //LA45
+ {0, E_12, D_12, F_12}, //LA46
+ {0, H_12, G_12, I_12}, //LA47
+ {0, K_12, J_12, L_12}, //LA48
+ {0, B_13, A_13, C_13}, //LA49
+ {0, E_13, D_13, F_13}, //LA50
+ {0, H_13, G_13, I_13}, //LA51
+ {0, K_13, J_13, L_13}, //LA52
+ {0, B_14, A_14, C_14}, //LA53
+ {0, E_14, D_14, F_14}, //LA54
+ {0, H_14, G_14, I_14}, //LA55
+ {0, K_14, J_14, L_14}, //LA56
+ {0, B_15, A_15, C_15}, //LA57
+ {0, E_15, D_15, F_15}, //LA58
+ {0, H_15, G_15, I_15}, //LA59
+ {0, K_15, J_15, L_15}, //LA60
+ {0, B_16, A_16, C_16}, //LA61
+ {0, E_16, D_16, F_16}, //LA62
+ {0, H_16, G_16, I_16}, //LA63
+ {0, K_16, J_16, L_16}, //LA64
+};
+
+#elif !defined(RGB_BACKLIGHT_M6_B)
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
#define ISSI_ADDR_1 0x74
{0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
{195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA47
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA47
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
+};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {180,64}, {200,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255},
+ {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {214,255}, {219,255}
+};
+#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA50
+ {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0},
+ {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16},
+ {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16},
+ {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA50
+ {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255},
+ {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129},
+ {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101},
+ {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
+};
#elif defined (RGB_BACKLIGHT_M6_B)
// M6-B is really simple:
// 0 3 5
{ 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
{ 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
+#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 }
+};
+#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55,
+// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
#elif defined (RGB_BACKLIGHT_M6_B)
// M6-B is really simple:
// 0 3 5
{
#if defined (RGB_BACKLIGHT_M6_B)
IS31FL3218_update_pwm_buffers();
+#elif defined (RGB_BACKLIGHT_HS60)
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
#else
IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
{
#if defined (RGB_BACKLIGHT_M6_B)
IS31FL3218_set_color( index, red, green, blue );
+#elif defined (RGB_BACKLIGHT_HS60)
+ IS31FL3733_set_color( index, red, green, blue );
#else
IS31FL3731_set_color( index, red, green, blue );
#endif
{
#if defined (RGB_BACKLIGHT_M6_B)
IS31FL3218_set_color_all( red, green, blue );
+#elif defined (RGB_BACKLIGHT_HS60)
+ IS31FL3733_set_color_all( red, green, blue );
#else
IS31FL3731_set_color_all( red, green, blue );
#endif
g_any_key_hit = 0;
}
+#if !defined(RGB_BACKLIGHT_HS60)
// This is (F_CPU/1024) / 20 Hz
// = 15625 Hz / 20 Hz
// = 781
{
TIMSK3 &= ~_BV(OCIE3A);
}
+#else //STM32, use GPT with TIM4. Enable in halconf.h
+static void gpt_backlight_timer_task(GPTDriver *gptp);
+// Timer setup at 200Khz, callback at 10k ticks = 20Hz
+static GPTConfig gpt4cfg1 = {
+ .frequency = 200000U,
+ .callback = gpt_backlight_timer_task
+};
+
+void backlight_timer_init(void)
+{
+ gptStart(&GPTD4, &gpt4cfg1);
+}
+
+void backlight_timer_enable(void)
+{
+ gptStartContinuous(&GPTD4, 10000);
+}
+
+void backlight_timer_disable(void)
+{
+ gptStopTimer(&GPTD4);
+}
+#endif //!defined(RGB_BACKLIGHT_HS60)
void backlight_set_suspend_state(bool state)
{
}
}
+#if !defined(RGB_BACKLIGHT_HS60)
ISR(TIMER3_COMPA_vect)
+#else //STM32 interrupt
+static void gpt_backlight_timer_task(GPTDriver *gptp)
+#endif
{
// delay 1 second before driving LEDs or doing anything else
static uint8_t startup_tick = 0;
#if defined(RGB_BACKLIGHT_M6_B)
IS31FL3218_init();
+#elif defined(RGB_BACKLIGHT_HS60)
+ IS31FL3733_init( ISSI_ADDR_1 );
+
+ for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ )
+ {
+#if defined (HS60_ANSI)
+ bool enabled = !( ( index == 48-1 ) || //LA48
+ ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#elif defined (HS60_HHKB)
+ bool enabled = !( ( index == 61-1 ) || //LA61
+ ( index == 62-1 ) ); //LA62
+#else //HS60_ISO
+ bool enabled = !( ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#endif
+ // This only caches it for later
+ IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ // This actually updates the LED drivers
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
#else
IS31FL3731_init( ISSI_ADDR_1 );
IS31FL3731_init( ISSI_ADDR_2 );
}
}
}
-#endif // defined(RGB_DEBUGGING_ONLY)
void backlight_debug_led( bool state )
{
PORTE &= ~(1<<6);
}
}
+#endif // defined(RGB_DEBUGGING_ONLY)
#endif // BACKLIGHT_ENABLED
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
- * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and
- * https://github.com/leaflabs/libmaple
+ * This files are free to use from http://engsta.com/stm32-flash-memory-eeprom-emulator/ by
+ * Artur F.
*
* Modifications for QMK and STM32F303 by Yiancar
*/
+#include <stdio.h>
+#include <string.h>
#include "eeprom_stm32.h"
+/*****************************************************************************
+ * Allows to use the internal flash to store non volatile data. To initialize
+ * the functionality use the EEPROM_Init() function. Be sure that by reprogramming
+ * of the controller just affected pages will be deleted. In other case the non
+ * volatile data will be lost.
+******************************************************************************/
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Functions -----------------------------------------------------------------*/
+
+uint8_t DataBuf[FEE_PAGE_SIZE];
+/*****************************************************************************
+* Delete Flash Space used for user Data, deletes the whole space between
+* RW_PAGE_BASE_ADDRESS and the last uC Flash Page
+******************************************************************************/
+uint16_t EEPROM_Init(void) {
+ // unlock flash
+ FLASH_Unlock();
- FLASH_Status EE_ErasePage(uint32_t);
-
- uint16_t EE_CheckPage(uint32_t, uint16_t);
- uint16_t EE_CheckErasePage(uint32_t, uint16_t);
- uint16_t EE_Format(void);
- uint32_t EE_FindValidPage(void);
- uint16_t EE_GetVariablesCount(uint32_t, uint16_t);
- uint16_t EE_PageTransfer(uint32_t, uint32_t, uint16_t);
- uint16_t EE_VerifyPageFullWriteVariable(uint16_t, uint16_t);
-
- uint32_t PageBase0 = EEPROM_PAGE0_BASE;
- uint32_t PageBase1 = EEPROM_PAGE1_BASE;
- uint32_t PageSize = EEPROM_PAGE_SIZE;
- uint16_t Status = EEPROM_NOT_INIT;
-
-// See http://www.st.com/web/en/resource/technical/document/application_note/CD00165693.pdf
-
-/**
- * @brief Check page for blank
- * @param page base address
- * @retval Success or error
- * EEPROM_BAD_FLASH: page not empty after erase
- * EEPROM_OK: page blank
- */
-uint16_t EE_CheckPage(uint32_t pageBase, uint16_t status)
-{
- uint32_t pageEnd = pageBase + (uint32_t)PageSize;
-
- // Page Status not EEPROM_ERASED and not a "state"
- if ((*(__IO uint16_t*)pageBase) != EEPROM_ERASED && (*(__IO uint16_t*)pageBase) != status)
- return EEPROM_BAD_FLASH;
- for(pageBase += 4; pageBase < pageEnd; pageBase += 4)
- if ((*(__IO uint32_t*)pageBase) != 0xFFFFFFFF) // Verify if slot is empty
- return EEPROM_BAD_FLASH;
- return EEPROM_OK;
-}
-
-/**
- * @brief Erase page with increment erase counter (page + 2)
- * @param page base address
- * @retval Success or error
- * FLASH_COMPLETE: success erase
- * - Flash error code: on write Flash error
- */
-FLASH_Status EE_ErasePage(uint32_t pageBase)
-{
- FLASH_Status FlashStatus;
- uint16_t data = (*(__IO uint16_t*)(pageBase));
- if ((data == EEPROM_ERASED) || (data == EEPROM_VALID_PAGE) || (data == EEPROM_RECEIVE_DATA))
- data = (*(__IO uint16_t*)(pageBase + 2)) + 1;
- else
- data = 0;
-
- FlashStatus = FLASH_ErasePage(pageBase);
- if (FlashStatus == FLASH_COMPLETE)
- FlashStatus = FLASH_ProgramHalfWord(pageBase + 2, data);
-
- return FlashStatus;
-}
+ // Clear Flags
+ //FLASH_ClearFlag(FLASH_SR_EOP|FLASH_SR_PGERR|FLASH_SR_WRPERR);
-/**
- * @brief Check page for blank and erase it
- * @param page base address
- * @retval Success or error
- * - Flash error code: on write Flash error
- * - EEPROM_BAD_FLASH: page not empty after erase
- * - EEPROM_OK: page blank
- */
-uint16_t EE_CheckErasePage(uint32_t pageBase, uint16_t status)
-{
- uint16_t FlashStatus;
- if (EE_CheckPage(pageBase, status) != EEPROM_OK)
- {
- FlashStatus = EE_ErasePage(pageBase);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
- return EE_CheckPage(pageBase, status);
- }
- return EEPROM_OK;
+ return FEE_DENSITY_BYTES;
}
+/*****************************************************************************
+* Erase the whole reserved Flash Space used for user Data
+******************************************************************************/
+void EEPROM_Erase (void) {
-/**
- * @brief Find valid Page for write or read operation
- * @param Page0: Page0 base address
- * Page1: Page1 base address
- * @retval Valid page address (PAGE0 or PAGE1) or NULL in case of no valid page was found
- */
-uint32_t EE_FindValidPage(void)
-{
- uint16_t status0 = (*(__IO uint16_t*)PageBase0); // Get Page0 actual status
- uint16_t status1 = (*(__IO uint16_t*)PageBase1); // Get Page1 actual status
-
- if (status0 == EEPROM_VALID_PAGE && status1 == EEPROM_ERASED)
- return PageBase0;
- if (status1 == EEPROM_VALID_PAGE && status0 == EEPROM_ERASED)
- return PageBase1;
-
- return 0;
-}
+ int page_num = 0;
-/**
- * @brief Calculate unique variables in EEPROM
- * @param start: address of first slot to check (page + 4)
- * @param end: page end address
- * @param address: 16 bit virtual address of the variable to excluse (or 0XFFFF)
- * @retval count of variables
- */
-uint16_t EE_GetVariablesCount(uint32_t pageBase, uint16_t skipAddress)
-{
- uint16_t varAddress, nextAddress;
- uint32_t idx;
- uint32_t pageEnd = pageBase + (uint32_t)PageSize;
- uint16_t count = 0;
-
- for (pageBase += 6; pageBase < pageEnd; pageBase += 4)
- {
- varAddress = (*(__IO uint16_t*)pageBase);
- if (varAddress == 0xFFFF || varAddress == skipAddress)
- continue;
-
- count++;
- for(idx = pageBase + 4; idx < pageEnd; idx += 4)
- {
- nextAddress = (*(__IO uint16_t*)idx);
- if (nextAddress == varAddress)
- {
- count--;
- break;
- }
- }
- }
- return count;
+ // delete all pages from specified start page to the last page
+ do {
+ FLASH_ErasePage(FEE_PAGE_BASE_ADDRESS + (page_num * FEE_PAGE_SIZE));
+ page_num++;
+ } while (page_num < FEE_DENSITY_PAGES);
}
+/*****************************************************************************
+* Writes once data byte to flash on specified address. If a byte is already
+* written, the whole page must be copied to a buffer, the byte changed and
+* the manipulated buffer written after PageErase.
+*******************************************************************************/
+uint16_t EEPROM_WriteDataByte (uint16_t Address, uint8_t DataByte) {
-/**
- * @brief Transfers last updated variables data from the full Page to an empty one.
- * @param newPage: new page base address
- * @param oldPage: old page base address
- * @param SkipAddress: 16 bit virtual address of the variable (or 0xFFFF)
- * @retval Success or error status:
- * - FLASH_COMPLETE: on success
- * - EEPROM_OUT_SIZE: if valid new page is full
- * - Flash error code: on write Flash error
- */
-uint16_t EE_PageTransfer(uint32_t newPage, uint32_t oldPage, uint16_t SkipAddress)
-{
- uint32_t oldEnd, newEnd;
- uint32_t oldIdx, newIdx, idx;
- uint16_t address, data, found;
- FLASH_Status FlashStatus;
-
- // Transfer process: transfer variables from old to the new active page
- newEnd = newPage + ((uint32_t)PageSize);
-
- // Find first free element in new page
- for (newIdx = newPage + 4; newIdx < newEnd; newIdx += 4)
- if ((*(__IO uint32_t*)newIdx) == 0xFFFFFFFF) // Verify if element
- break; // contents are 0xFFFFFFFF
- if (newIdx >= newEnd)
- return EEPROM_OUT_SIZE;
-
- oldEnd = oldPage + 4;
- oldIdx = oldPage + (uint32_t)(PageSize - 2);
-
- for (; oldIdx > oldEnd; oldIdx -= 4)
- {
- address = *(__IO uint16_t*)oldIdx;
- if (address == 0xFFFF || address == SkipAddress)
- continue; // it's means that power off after write data
-
- found = 0;
- for (idx = newPage + 6; idx < newIdx; idx += 4)
- if ((*(__IO uint16_t*)(idx)) == address)
- {
- found = 1;
- break;
- }
-
- if (found)
- continue;
-
- if (newIdx < newEnd)
- {
- data = (*(__IO uint16_t*)(oldIdx - 2));
-
- FlashStatus = FLASH_ProgramHalfWord(newIdx, data);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
+ FLASH_Status FlashStatus = FLASH_COMPLETE;
- FlashStatus = FLASH_ProgramHalfWord(newIdx + 2, address);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
+ uint32_t page;
+ int i;
- newIdx += 4;
- }
- else
- return EEPROM_OUT_SIZE;
+ // exit if desired address is above the limit (e.G. under 2048 Bytes for 4 pages)
+ if (Address > FEE_DENSITY_BYTES) {
+ return 0;
}
- // Erase the old Page: Set old Page status to EEPROM_EEPROM_ERASED status
- data = EE_CheckErasePage(oldPage, EEPROM_ERASED);
- if (data != EEPROM_OK)
- return data;
+ // calculate which page is affected (Pagenum1/Pagenum2...PagenumN)
+ page = (FEE_PAGE_BASE_ADDRESS + FEE_ADDR_OFFSET(Address)) & 0x00000FFF;
- // Set new Page status
- FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_VALID_PAGE);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
+ if (page % FEE_PAGE_SIZE) page = page + FEE_PAGE_SIZE;
+ page = (page / FEE_PAGE_SIZE) - 1;
- return EEPROM_OK;
-}
+ // if current data is 0xFF, the byte is empty, just overwrite with the new one
+ if ((*(__IO uint16_t*)(FEE_PAGE_BASE_ADDRESS + FEE_ADDR_OFFSET(Address))) == FEE_EMPTY_WORD) {
-/**
- * @brief Verify if active page is full and Writes variable in EEPROM.
- * @param Address: 16 bit virtual address of the variable
- * @param Data: 16 bit data to be written as variable value
- * @retval Success or error status:
- * - FLASH_COMPLETE: on success
- * - EEPROM_PAGE_FULL: if valid page is full (need page transfer)
- * - EEPROM_NO_VALID_PAGE: if no valid page was found
- * - EEPROM_OUT_SIZE: if EEPROM size exceeded
- * - Flash error code: on write Flash error
- */
-uint16_t EE_VerifyPageFullWriteVariable(uint16_t Address, uint16_t Data)
-{
- FLASH_Status FlashStatus;
- uint32_t idx, pageBase, pageEnd, newPage;
- uint16_t count;
-
- // Get valid Page for write operation
- pageBase = EE_FindValidPage();
- if (pageBase == 0)
- return EEPROM_NO_VALID_PAGE;
-
- // Get the valid Page end Address
- pageEnd = pageBase + PageSize; // Set end of page
-
- for (idx = pageEnd - 2; idx > pageBase; idx -= 4)
- {
- if ((*(__IO uint16_t*)idx) == Address) // Find last value for address
- {
- count = (*(__IO uint16_t*)(idx - 2)); // Read last data
- if (count == Data)
- return EEPROM_OK;
- if (count == 0xFFFF)
- {
- FlashStatus = FLASH_ProgramHalfWord(idx - 2, Data); // Set variable data
- if (FlashStatus == FLASH_COMPLETE)
- return EEPROM_OK;
- }
- break;
- }
+ FlashStatus = FLASH_ProgramHalfWord(FEE_PAGE_BASE_ADDRESS + FEE_ADDR_OFFSET(Address), (uint16_t)(0x00FF & DataByte));
}
+ else {
- // Check each active page address starting from begining
- for (idx = pageBase + 4; idx < pageEnd; idx += 4)
- if ((*(__IO uint32_t*)idx) == 0xFFFFFFFF) // Verify if element
- { // contents are 0xFFFFFFFF
- FlashStatus = FLASH_ProgramHalfWord(idx, Data); // Set variable data
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
- FlashStatus = FLASH_ProgramHalfWord(idx + 2, Address); // Set variable virtual address
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
- return EEPROM_OK;
- }
-
- // Empty slot not found, need page transfer
- // Calculate unique variables in page
- count = EE_GetVariablesCount(pageBase, Address) + 1;
- if (count >= (PageSize / 4 - 1))
- return EEPROM_OUT_SIZE;
-
- if (pageBase == PageBase1)
- newPage = PageBase0; // New page address where variable will be moved to
- else
- newPage = PageBase1;
-
- // Set the new Page status to RECEIVE_DATA status
- FlashStatus = FLASH_ProgramHalfWord(newPage, EEPROM_RECEIVE_DATA);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
-
- // Write the variable passed as parameter in the new active page
- FlashStatus = FLASH_ProgramHalfWord(newPage + 4, Data);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
-
- FlashStatus = FLASH_ProgramHalfWord(newPage + 6, Address);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
-
- return EE_PageTransfer(newPage, pageBase, Address);
-}
-
-/*EEPROMClass::EEPROMClass(void)
-{
- PageBase0 = EEPROM_PAGE0_BASE;
- PageBase1 = EEPROM_PAGE1_BASE;
- PageSize = EEPROM_PAGE_SIZE;
- Status = EEPROM_NOT_INIT;
-}*/
-/*
-uint16_t EEPROM_init(uint32_t pageBase0, uint32_t pageBase1, uint32_t pageSize)
-{
- PageBase0 = pageBase0;
- PageBase1 = pageBase1;
- PageSize = pageSize;
- return EEPROM_init();
-}*/
+ // Copy Page to a buffer
+ memcpy(DataBuf, (uint8_t*)FEE_PAGE_BASE_ADDRESS + (page * FEE_PAGE_SIZE), FEE_PAGE_SIZE); // !!! Calculate base address for the desired page
-uint16_t EEPROM_init(void)
-{
- uint16_t status0 = 6, status1 = 6;
- FLASH_Status FlashStatus;
+ // check if new data is differ to current data, return if not, proceed if yes
+ if (DataByte == *(__IO uint8_t*)(FEE_PAGE_BASE_ADDRESS + FEE_ADDR_OFFSET(Address))) {
+ return 0;
+ }
- FLASH_Unlock();
- Status = EEPROM_NO_VALID_PAGE;
+ // manipulate desired data byte in temp data array if new byte is differ to the current
+ DataBuf[FEE_ADDR_OFFSET(Address)] = DataByte;
- status0 = (*(__IO uint16_t *)PageBase0);
- status1 = (*(__IO uint16_t *)PageBase1);
+ //Erase Page
+ FlashStatus = FLASH_ErasePage(FEE_PAGE_BASE_ADDRESS + page);
- switch (status0)
- {
-/*
- Page0 Page1
- ----- -----
- EEPROM_ERASED EEPROM_VALID_PAGE Page1 valid, Page0 erased
- EEPROM_RECEIVE_DATA Page1 need set to valid, Page0 erased
- EEPROM_ERASED make EE_Format
- any Error: EEPROM_NO_VALID_PAGE
-*/
- case EEPROM_ERASED:
- if (status1 == EEPROM_VALID_PAGE) // Page0 erased, Page1 valid
- Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED);
- else if (status1 == EEPROM_RECEIVE_DATA) // Page0 erased, Page1 receive
- {
- FlashStatus = FLASH_ProgramHalfWord(PageBase1, EEPROM_VALID_PAGE);
- if (FlashStatus != FLASH_COMPLETE)
- Status = FlashStatus;
- else
- Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED);
- }
- else if (status1 == EEPROM_ERASED) // Both in erased state so format EEPROM
- Status = EEPROM_format();
- break;
-/*
- Page0 Page1
- ----- -----
- EEPROM_RECEIVE_DATA EEPROM_VALID_PAGE Transfer Page1 to Page0
- EEPROM_ERASED Page0 need set to valid, Page1 erased
- any EEPROM_NO_VALID_PAGE
-*/
- case EEPROM_RECEIVE_DATA:
- if (status1 == EEPROM_VALID_PAGE) // Page0 receive, Page1 valid
- Status = EE_PageTransfer(PageBase0, PageBase1, 0xFFFF);
- else if (status1 == EEPROM_ERASED) // Page0 receive, Page1 erased
- {
- Status = EE_CheckErasePage(PageBase1, EEPROM_ERASED);
- if (Status == EEPROM_OK)
- {
- FlashStatus = FLASH_ProgramHalfWord(PageBase0, EEPROM_VALID_PAGE);
- if (FlashStatus != FLASH_COMPLETE)
- Status = FlashStatus;
- else
- Status = EEPROM_OK;
+ // Write new data (whole page) to flash if data has beed changed
+ for(i = 0; i < (FEE_PAGE_SIZE / 2); i++) {
+ if ((__IO uint16_t)(0xFF00 | DataBuf[FEE_ADDR_OFFSET(i)]) != 0xFFFF) {
+ FlashStatus = FLASH_ProgramHalfWord((FEE_PAGE_BASE_ADDRESS + (page * FEE_PAGE_SIZE)) + (i * 2), (uint16_t)(0xFF00 | DataBuf[FEE_ADDR_OFFSET(i)]));
}
}
- break;
-/*
- Page0 Page1
- ----- -----
- EEPROM_VALID_PAGE EEPROM_VALID_PAGE Error: EEPROM_NO_VALID_PAGE
- EEPROM_RECEIVE_DATA Transfer Page0 to Page1
- any Page0 valid, Page1 erased
-*/
- case EEPROM_VALID_PAGE:
- if (status1 == EEPROM_VALID_PAGE) // Both pages valid
- Status = EEPROM_NO_VALID_PAGE;
- else if (status1 == EEPROM_RECEIVE_DATA)
- Status = EE_PageTransfer(PageBase1, PageBase0, 0xFFFF);
- else
- Status = EE_CheckErasePage(PageBase1, EEPROM_ERASED);
- break;
-/*
- Page0 Page1
- ----- -----
- any EEPROM_VALID_PAGE Page1 valid, Page0 erased
- EEPROM_RECEIVE_DATA Page1 valid, Page0 erased
- any EEPROM_NO_VALID_PAGE
-*/
- default:
- if (status1 == EEPROM_VALID_PAGE)
- Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED); // Check/Erase Page0
- else if (status1 == EEPROM_RECEIVE_DATA)
- {
- FlashStatus = FLASH_ProgramHalfWord(PageBase1, EEPROM_VALID_PAGE);
- if (FlashStatus != FLASH_COMPLETE)
- Status = FlashStatus;
- else
- Status = EE_CheckErasePage(PageBase0, EEPROM_ERASED);
- }
- break;
- }
- return Status;
-}
-
-/**
- * @brief Erases PAGE0 and PAGE1 and writes EEPROM_VALID_PAGE / 0 header to PAGE0
- * @param PAGE0 and PAGE1 base addresses
- * @retval Status of the last operation (Flash write or erase) done during EEPROM formating
- */
-uint16_t EEPROM_format(void)
-{
- uint16_t status;
- FLASH_Status FlashStatus;
- FLASH_Unlock();
-
- // Erase Page0
- status = EE_CheckErasePage(PageBase0, EEPROM_VALID_PAGE);
- if (status != EEPROM_OK)
- return status;
- if ((*(__IO uint16_t*)PageBase0) == EEPROM_ERASED)
- {
- // Set Page0 as valid page: Write VALID_PAGE at Page0 base address
- FlashStatus = FLASH_ProgramHalfWord(PageBase0, EEPROM_VALID_PAGE);
- if (FlashStatus != FLASH_COMPLETE)
- return FlashStatus;
}
- // Erase Page1
- return EE_CheckErasePage(PageBase1, EEPROM_ERASED);
-}
-
-/**
- * @brief Returns the erase counter for current page
- * @param Data: Global variable contains the read variable value
- * @retval Success or error status:
- * - EEPROM_OK: if erases counter return.
- * - EEPROM_NO_VALID_PAGE: if no valid page was found.
- */
-uint16_t EEPROM_erases(uint16_t *Erases)
-{
- uint32_t pageBase;
- if (Status != EEPROM_OK)
- if (EEPROM_init() != EEPROM_OK)
- return Status;
-
- // Get active Page for read operation
- pageBase = EE_FindValidPage();
- if (pageBase == 0)
- return EEPROM_NO_VALID_PAGE;
-
- *Erases = (*(__IO uint16_t*)pageBase+2);
- return EEPROM_OK;
-}
-
-/**
- * @brief Returns the last stored variable data, if found,
- * which correspond to the passed virtual address
- * @param Address: Variable virtual address
- * @retval Data for variable or EEPROM_DEFAULT_DATA, if any errors
- */
-/*
-uint16_t EEPROM_read (uint16_t Address)
-{
- uint16_t data;
- EEPROM_read(Address, &data);
- return data;
-}*/
-
-/**
- * @brief Returns the last stored variable data, if found,
- * which correspond to the passed virtual address
- * @param Address: Variable virtual address
- * @param Data: Pointer to data variable
- * @retval Success or error status:
- * - EEPROM_OK: if variable was found
- * - EEPROM_BAD_ADDRESS: if the variable was not found
- * - EEPROM_NO_VALID_PAGE: if no valid page was found.
- */
-uint16_t EEPROM_read(uint16_t Address, uint16_t *Data)
-{
- uint32_t pageBase, pageEnd;
-
- // Set default data (empty EEPROM)
- *Data = EEPROM_DEFAULT_DATA;
-
- if (Status == EEPROM_NOT_INIT)
- if (EEPROM_init() != EEPROM_OK)
- return Status;
-
- // Get active Page for read operation
- pageBase = EE_FindValidPage();
- if (pageBase == 0)
- return EEPROM_NO_VALID_PAGE;
-
- // Get the valid Page end Address
- pageEnd = pageBase + ((uint32_t)(PageSize - 2));
-
- // Check each active page address starting from end
- for (pageBase += 6; pageEnd >= pageBase; pageEnd -= 4)
- if ((*(__IO uint16_t*)pageEnd) == Address) // Compare the read address with the virtual address
- {
- *Data = (*(__IO uint16_t*)(pageEnd - 2)); // Get content of Address-2 which is variable value
- return EEPROM_OK;
- }
-
- // Return ReadStatus value: (0: variable exist, 1: variable doesn't exist)
- return EEPROM_BAD_ADDRESS;
-}
-
-/**
- * @brief Writes/upadtes variable data in EEPROM.
- * @param VirtAddress: Variable virtual address
- * @param Data: 16 bit data to be written
- * @retval Success or error status:
- * - FLASH_COMPLETE: on success
- * - EEPROM_BAD_ADDRESS: if address = 0xFFFF
- * - EEPROM_PAGE_FULL: if valid page is full
- * - EEPROM_NO_VALID_PAGE: if no valid page was found
- * - EEPROM_OUT_SIZE: if no empty EEPROM variables
- * - Flash error code: on write Flash error
- */
-uint16_t EEPROM_write(uint16_t Address, uint16_t Data)
-{
- if (Status == EEPROM_NOT_INIT)
- if (EEPROM_init() != EEPROM_OK)
- return Status;
-
- if (Address == 0xFFFF)
- return EEPROM_BAD_ADDRESS;
-
- // Write the variable virtual address and value in the EEPROM
- uint16_t status = EE_VerifyPageFullWriteVariable(Address, Data);
- return status;
-}
-
-/**
- * @brief Writes/upadtes variable data in EEPROM.
- The value is written only if differs from the one already saved at the same address.
- * @param VirtAddress: Variable virtual address
- * @param Data: 16 bit data to be written
- * @retval Success or error status:
- * - EEPROM_SAME_VALUE: If new Data matches existing EEPROM Data
- * - FLASH_COMPLETE: on success
- * - EEPROM_BAD_ADDRESS: if address = 0xFFFF
- * - EEPROM_PAGE_FULL: if valid page is full
- * - EEPROM_NO_VALID_PAGE: if no valid page was found
- * - EEPROM_OUT_SIZE: if no empty EEPROM variables
- * - Flash error code: on write Flash error
- */
-uint16_t EEPROM_update(uint16_t Address, uint16_t Data)
-{
- uint16_t temp;
- EEPROM_read(Address, &temp);
- if (temp == Data)
- return EEPROM_SAME_VALUE;
- else
- return EEPROM_write(Address, Data);
+ return FlashStatus;
}
+/*****************************************************************************
+* Read once data byte from a specified address.
+*******************************************************************************/
+uint8_t EEPROM_ReadDataByte (uint16_t Address) {
-/**
- * @brief Return number of variable
- * @retval Number of variables
- */
-uint16_t EEPROM_count(uint16_t *Count)
-{
- if (Status == EEPROM_NOT_INIT)
- if (EEPROM_init() != EEPROM_OK)
- return Status;
-
- // Get valid Page for write operation
- uint32_t pageBase = EE_FindValidPage();
- if (pageBase == 0)
- return EEPROM_NO_VALID_PAGE; // No valid page, return max. numbers
+ uint8_t DataByte = 0xFF;
- *Count = EE_GetVariablesCount(pageBase, 0xFFFF);
- return EEPROM_OK;
-}
+ // Get Byte from specified address
+ DataByte = (*(__IO uint8_t*)(FEE_PAGE_BASE_ADDRESS + FEE_ADDR_OFFSET(Address)));
-uint16_t EEPROM_maxcount(void)
-{
- return ((PageSize / 4)-1);
+ return DataByte;
}
-
+/*****************************************************************************
+* Wrap library in AVR style functions.
+*******************************************************************************/
uint8_t eeprom_read_byte (const uint8_t *Address)
{
const uint16_t p = (const uint32_t) Address;
- uint16_t temp;
- EEPROM_read(p, &temp);
- return (uint8_t) temp;
+ return EEPROM_ReadDataByte(p);
}
void eeprom_write_byte (uint8_t *Address, uint8_t Value)
{
uint16_t p = (uint32_t) Address;
- EEPROM_write(p, (uint16_t) Value);
+ EEPROM_WriteDataByte(p, Value);
}
void eeprom_update_byte (uint8_t *Address, uint8_t Value)
{
uint16_t p = (uint32_t) Address;
- EEPROM_update(p, (uint16_t) Value);
+ EEPROM_WriteDataByte(p, Value);
}
uint16_t eeprom_read_word (const uint16_t *Address)
{
const uint16_t p = (const uint32_t) Address;
- uint16_t temp;
- EEPROM_read(p, &temp);
- return temp;
+ return EEPROM_ReadDataByte(p) | (EEPROM_ReadDataByte(p+1) << 8);
}
void eeprom_write_word (uint16_t *Address, uint16_t Value)
{
uint16_t p = (uint32_t) Address;
- EEPROM_write(p, Value);
+ EEPROM_WriteDataByte(p, (uint8_t) Value);
+ EEPROM_WriteDataByte(p + 1, (uint8_t) (Value >> 8));
}
void eeprom_update_word (uint16_t *Address, uint16_t Value)
{
uint16_t p = (uint32_t) Address;
- EEPROM_update(p, Value);
+ EEPROM_WriteDataByte(p, (uint8_t) Value);
+ EEPROM_WriteDataByte(p + 1, (uint8_t) (Value >> 8));
}
uint32_t eeprom_read_dword (const uint32_t *Address)
{
const uint16_t p = (const uint32_t) Address;
- uint16_t temp1, temp2;
- EEPROM_read(p, &temp1);
- EEPROM_read(p + 1, &temp2);
- return temp1 | (temp2 << 16);
+ return EEPROM_ReadDataByte(p) | (EEPROM_ReadDataByte(p+1) << 8)
+ | (EEPROM_ReadDataByte(p+2) << 16) | (EEPROM_ReadDataByte(p+3) << 24);
}
void eeprom_write_dword (uint32_t *Address, uint32_t Value)
{
- uint16_t temp = (uint16_t) Value;
- uint16_t p = (uint32_t) Address;
- EEPROM_write(p, temp);
- temp = (uint16_t) (Value >> 16);
- EEPROM_write(p + 1, temp);
+ uint16_t p = (const uint32_t) Address;
+ EEPROM_WriteDataByte(p, (uint8_t) Value);
+ EEPROM_WriteDataByte(p+1, (uint8_t) (Value >> 8));
+ EEPROM_WriteDataByte(p+2, (uint8_t) (Value >> 16));
+ EEPROM_WriteDataByte(p+3, (uint8_t) (Value >> 24));
}
void eeprom_update_dword (uint32_t *Address, uint32_t Value)
{
- uint16_t temp = (uint16_t) Value;
- uint16_t p = (uint32_t) Address;
- EEPROM_update(p, temp);
- temp = (uint16_t) (Value >> 16);
- EEPROM_update(p + 1, temp);
+ uint16_t p = (const uint32_t) Address;
+ EEPROM_WriteDataByte(p, (uint8_t) Value);
+ EEPROM_WriteDataByte(p+1, (uint8_t) (Value >> 8));
+ EEPROM_WriteDataByte(p+2, (uint8_t) (Value >> 16));
+ EEPROM_WriteDataByte(p+3, (uint8_t) (Value >> 24));
+}
+
+void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
+ const uint8_t *p = (const uint8_t *)addr;
+ uint8_t *dest = (uint8_t *)buf;
+ while (len--) {
+ *dest++ = eeprom_read_byte(p++);
+ }
+}
+
+void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
+ uint8_t *p = (uint8_t *)addr;
+ const uint8_t *src = (const uint8_t *)buf;
+ while (len--) {
+ eeprom_write_byte(p++, *src++);
+ }
+}
+
+void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
+ uint8_t *p = (uint8_t *)addr;
+ const uint8_t *src = (const uint8_t *)buf;
+ while (len--) {
+ eeprom_write_byte(p++, *src++);
+ }
}
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
- * This files are free to use from https://github.com/rogerclarkmelbourne/Arduino_STM32 and
- * https://github.com/leaflabs/libmaple
+ * This files are free to use from http://engsta.com/stm32-flash-memory-eeprom-emulator/ by
+ * Artur F.
*
* Modifications for QMK and STM32F303 by Yiancar
+ *
+ * This library assumes 8-bit data locations. To add a new MCU, please provide the flash
+ * page size and the total flash size in Kb. The number of available pages must be a multiple
+ * of 2. Only half of the pages account for the total EEPROM size.
+ * This library also assumes that the pages are not used by the firmware.
*/
-// This file must be modified if the MCU is not defined below.
-// This library also assumes that the pages are not used by the firmware.
-
#ifndef __EEPROM_H
#define __EEPROM_H
#ifndef EEPROM_PAGE_SIZE
#if defined (MCU_STM32F103RB)
- #define EEPROM_PAGE_SIZE (uint16_t)0x400 /* Page size = 1KByte */
+ #define FEE_PAGE_SIZE (uint16_t)0x400 // Page size = 1KByte
+ #define FEE_DENSITY_PAGES 2 // How many pages are used
#elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE) || defined (MCU_STM32F103RD) || defined (MCU_STM32F303CC)
- #define EEPROM_PAGE_SIZE (uint16_t)0x800 /* Page size = 2KByte */
+ #define FEE_PAGE_SIZE (uint16_t)0x800 // Page size = 2KByte
+ #define FEE_DENSITY_PAGES 4 // How many pages are used
#else
#error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
#endif
#ifndef EEPROM_START_ADDRESS
#if defined (MCU_STM32F103RB)
- #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 128 * 1024 - 2 * EEPROM_PAGE_SIZE))
+ #define FEE_MCU_FLASH_SIZE 128 // Size in Kb
#elif defined (MCU_STM32F103ZE) || defined (MCU_STM32F103RE)
- #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 512 * 1024 - 2 * EEPROM_PAGE_SIZE))
+ #define FEE_MCU_FLASH_SIZE 512 // Size in Kb
#elif defined (MCU_STM32F103RD)
- #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 384 * 1024 - 2 * EEPROM_PAGE_SIZE))
+ #define FEE_MCU_FLASH_SIZE 384 // Size in Kb
#elif defined (MCU_STM32F303CC)
- #define EEPROM_START_ADDRESS ((uint32_t)(0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE))
+ #define FEE_MCU_FLASH_SIZE 256 // Size in Kb
#else
#error "No MCU type specified. Add something like -DMCU_STM32F103RB to your compiler arguments (probably in a Makefile)."
#endif
#endif
-/* Pages 0 and 1 base and end addresses */
-#define EEPROM_PAGE0_BASE ((uint32_t)(EEPROM_START_ADDRESS + 0x000))
-#define EEPROM_PAGE1_BASE ((uint32_t)(EEPROM_START_ADDRESS + EEPROM_PAGE_SIZE))
-
-/* Page status definitions */
-#define EEPROM_ERASED ((uint16_t)0xFFFF) /* PAGE is empty */
-#define EEPROM_RECEIVE_DATA ((uint16_t)0xEEEE) /* PAGE is marked to receive data */
-#define EEPROM_VALID_PAGE ((uint16_t)0x0000) /* PAGE containing valid data */
-
-/* Page full define */
-enum uint16_t
- {
- EEPROM_OK = ((uint16_t)0x0000),
- EEPROM_OUT_SIZE = ((uint16_t)0x0081),
- EEPROM_BAD_ADDRESS = ((uint16_t)0x0082),
- EEPROM_BAD_FLASH = ((uint16_t)0x0083),
- EEPROM_NOT_INIT = ((uint16_t)0x0084),
- EEPROM_SAME_VALUE = ((uint16_t)0x0085),
- EEPROM_NO_VALID_PAGE = ((uint16_t)0x00AB)
- };
-
-#define EEPROM_DEFAULT_DATA 0xFFFF
+// DONT CHANGE
+// Choose location for the first EEPROM Page address on the top of flash
+#define FEE_PAGE_BASE_ADDRESS ((uint32_t)(0x8000000 + FEE_MCU_FLASH_SIZE * 1024 - FEE_DENSITY_PAGES * FEE_PAGE_SIZE))
+#define FEE_DENSITY_BYTES ((FEE_PAGE_SIZE / 2) * FEE_DENSITY_PAGES - 1)
+#define FEE_LAST_PAGE_ADDRESS (FEE_PAGE_BASE_ADDRESS + (FEE_PAGE_SIZE * FEE_DENSITY_PAGES))
+#define FEE_EMPTY_WORD ((uint16_t)0xFFFF)
+#define FEE_ADDR_OFFSET(Address)(Address * 2) // 1Byte per Word will be saved to preserve Flash
- uint16_t EEPROM_init(void);
- uint16_t EEPROM_format(void);
- uint16_t EEPROM_erases(uint16_t *);
- uint16_t EEPROM_read (uint16_t address, uint16_t *data);
- uint16_t EEPROM_write(uint16_t address, uint16_t data);
- uint16_t EEPROM_update(uint16_t address, uint16_t data);
- uint16_t EEPROM_count(uint16_t *);
- uint16_t EEPROM_maxcount(void);
+// Use this function to initialize the functionality
+uint16_t EEPROM_Init(void);
+void EEPROM_Erase (void);
+uint16_t EEPROM_WriteDataByte (uint16_t Address, uint8_t DataByte);
+uint8_t EEPROM_ReadDataByte (uint16_t Address);
#endif /* __EEPROM_H */
/* Set the Lock Bit to lock the FPEC and the FCR */
FLASH->CR |= FLASH_CR_LOCK;
}
+
+/**
+ * @brief Clears the FLASH's pending flags.
+ * @param FLASH_FLAG: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_PGERR: FLASH Programming error flag flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_EOP: FLASH End of Programming flag
+ * @retval None
+ */
+void FLASH_ClearFlag(uint32_t FLASH_FLAG)
+{
+ /* Clear the flags */
+ FLASH->SR = FLASH_FLAG;
+}
void FLASH_Unlock(void);
void FLASH_Lock(void);
+void FLASH_ClearFlag(uint32_t FLASH_FLAG);
#ifdef __cplusplus
}
*/
void eeconfig_init_quantum(void) {
#ifdef STM32_EEPROM_ENABLE
- EEPROM_format();
+ EEPROM_Erase();
#endif
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
eeprom_update_byte(EECONFIG_DEBUG, 0);
void eeconfig_disable(void)
{
#ifdef STM32_EEPROM_ENABLE
- EEPROM_format();
+ EEPROM_Erase();
#endif
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER_OFF);
}
#define EECONFIG_MAGIC_NUMBER (uint16_t)0xFEED
#define EECONFIG_MAGIC_NUMBER_OFF (uint16_t)0xFFFF
-/* eeprom parameteter address */
-#if !defined(STM32_EEPROM_ENABLE)
+/* EEPROM parameter address */
#define EECONFIG_MAGIC (uint16_t *)0
#define EECONFIG_DEBUG (uint8_t *)2
#define EECONFIG_DEFAULT_LAYER (uint8_t *)3
#define EECONFIG_KEYBOARD (uint32_t *)15
#define EECONFIG_USER (uint32_t *)19
-#else
-/* STM32F3 uses 16byte block. Reconfigure memory map */
-#define EECONFIG_MAGIC (uint16_t *)0
-#define EECONFIG_DEBUG (uint8_t *)1
-#define EECONFIG_DEFAULT_LAYER (uint8_t *)2
-#define EECONFIG_KEYMAP (uint8_t *)3
-#define EECONFIG_MOUSEKEY_ACCEL (uint8_t *)4
-#define EECONFIG_BACKLIGHT (uint8_t *)5
-#define EECONFIG_AUDIO (uint8_t *)6
-#define EECONFIG_RGBLIGHT (uint32_t *)7
-#define EECONFIG_UNICODEMODE (uint8_t *)9
-#define EECONFIG_STENOMODE (uint8_t *)10
-// EEHANDS for two handed boards
-#define EECONFIG_HANDEDNESS (uint8_t *)11
-#define EECONFIG_KEYBOARD (uint32_t *)12
-#define EECONFIG_USER (uint32_t *)14
-#endif
-
/* debug bit */
#define EECONFIG_DEBUG_ENABLE (1<<0)
#define EECONFIG_DEBUG_MATRIX (1<<1)
void eeprom_update_block (const void *__src, void *__dst, uint32_t __n);
#endif
-
#endif /* TMK_CORE_COMMON_EEPROM_H_ */
chSysInit();
#ifdef STM32_EEPROM_ENABLE
- EEPROM_init();
+ EEPROM_Init();
#endif
// TESTING
projects / qmk_firmware.git / commitdiff