--- /dev/null
+/*
+Copyright 2019 Keebio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xCB10
+#define PRODUCT_ID 0x125F
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Keebio
+#define PRODUCT Ergodicity
+#define DESCRIPTION Low-profile ergo keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, C7, B6, B4 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, D7, D6, D4, D3, D2, D1, D0, B7, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 7
+
+#define RGB_DI_PIN B2
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 12
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- /dev/null
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ergodicity.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
+
+*/
--- /dev/null
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ kA1, kA2, kA3, kE3, kA4, kA5, kA6, kA7, kA8, kA9, kA10, kA11, kA12, kA13, kA15, \
+ kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kB10, kB11, kB12, kB13, kB14, kB15, \
+ kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kC10, kC11, kC12, kC13, kC15, \
+ kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kD10, kD11, kD12, kD13, kD14, kD15, \
+ kE2, kE4, kE6, kE7, kE9, kE11, kE15 \
+) \
+{ \
+ { kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kA10, kA11, kA12, kA13, KC_NO, kA15 }, \
+ { kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kB10, kB11, kB12, kB13, kB14, kB15 }, \
+ { kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kC10, kC11, kC12, kC13, KC_NO, kC15 }, \
+ { KC_NO, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kD10, kD11, kD12, kD13, kD14, kD15 }, \
+ { KC_NO, kE2, kE3, kE4, KC_NO, kE6, kE7, KC_NO, kE9, KC_NO, kE11, KC_NO, KC_NO, kE15 } \
+}
--- /dev/null
+{
+ "keyboard_name": "Ergodicity",
+ "url": "https://keeb.io",
+ "maintainer": "Keebio",
+ "width": 19.5,
+ "height": 5.25,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label":"Esc", "x":0.5, "y":0},
+ {"label":"`", "x":1.75, "y":0.25},
+ {"label":"1", "x":2.75, "y":0.25},
+ {"label":"2", "x":3.75, "y":0},
+ {"label":"3", "x":4.75, "y":0.25},
+ {"label":"4", "x":5.75, "y":0.25},
+ {"label":"5", "x":6.75, "y":0.25},
+ {"label":"6", "x":7.75, "y":0.25},
+ {"label":"7", "x":11, "y":0.25},
+ {"label":"8", "x":12, "y":0.25},
+ {"label":"9", "x":13, "y":0.25},
+ {"label":"0", "x":14, "y":0.25},
+ {"label":"-", "x":15, "y":0},
+ {"label":"=", "x":16, "y":0.25},
+ {"label":"Backspace", "x":17, "y":0.25, "w":2},
+
+ {"label":"PgUp", "x":0.25, "y":1},
+ {"label":"Tab", "x":1.5, "y":1.25, "w":1.5},
+ {"label":"Q", "x":3, "y":1.25},
+ {"label":"W", "x":4.25, "y":1.25},
+ {"label":"E", "x":5.25, "y":1.25},
+ {"label":"R", "x":6.25, "y":1.25},
+ {"label":"T", "x":7.25, "y":1.25},
+ {"label":"Y", "x":10.5, "y":1.25},
+ {"label":"U", "x":11.5, "y":1.25},
+ {"label":"I", "x":12.5, "y":1.25},
+ {"label":"O", "x":13.5, "y":1.25},
+ {"label":"P", "x":14.75, "y":1.25},
+ {"label":"[", "x":15.75, "y":1.25},
+ {"label":"]", "x":16.75, "y":1.25},
+ {"label":"Backslash", "x":17.75, "y":1.25, "w":1.5},
+
+ {"label":"PgDn", "x":0, "y":2},
+ {"label":"Caps Lock", "x":1.25, "y":2.25, "w":2},
+ {"label":"A", "x":3.25, "y":2.25},
+ {"label":"S", "x":4.5, "y":2.25},
+ {"label":"D", "x":5.5, "y":2.25},
+ {"label":"F", "x":6.5, "y":2.25},
+ {"label":"G", "x":7.5, "y":2.25},
+ {"label":"H", "x":10.75, "y":2.25},
+ {"label":"J", "x":11.75, "y":2.25},
+ {"label":"K", "x":12.75, "y":2.25},
+ {"label":"L", "x":13.75, "y":2.25},
+ {"label":";", "x":15.25, "y":2.25},
+ {"label":"'", "x":16.25, "y":2.25},
+ {"label":"Enter", "x":17.25, "y":2.25, "w":2},
+
+ {"label":"Shift", "x":1.25, "y":3.25, "w":2.5},
+ {"label":"Z", "x":3.75, "y":3.25},
+ {"label":"X", "x":5, "y":3.25},
+ {"label":"C", "x":6, "y":3.25},
+ {"label":"V", "x":7, "y":3.25},
+ {"label":"B", "x":8, "y":3.25},
+ {"label":"B", "x":10.25, "y":3.25},
+ {"label":"N", "x":11.25, "y":3.25},
+ {"label":"M", "x":12.25, "y":3.25},
+ {"label":",", "x":13.25, "y":3.25},
+ {"label":".", "x":14.75, "y":3.25},
+ {"label":"/", "x":15.75, "y":3.25},
+ {"label":"Shift", "x":16.75, "y":3.25, "w":1.5},
+ {"label":"Fn", "x":18.25, "y":3.25},
+
+ {"label":"Alt", "x":1.25, "y":4.25, "w":1.5},
+ {"label":"Gui", "x":5, "y":4.25, "w":1.5},
+ {"label":"Space", "x":6.5, "y":4.25, "w":2},
+ {"label":"Menu", "x":8.5, "y":4.25},
+ {"label":"Space", "x":10.25, "y":4.25, "w":2.5},
+ {"label":"Alt", "x":12.75, "y":4.25, "w":1.5},
+ {"label":"Fn", "x":17.75, "y":4.25, "w":1.5}
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 Keebio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ QMKBEST = SAFE_RANGE,
+ QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
+ KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), \
+ KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL \
+ ),
+ [1] = LAYOUT(
+ _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, \
+ RGB_MOD, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ BL_STEP, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______ \
+ ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QMKBEST:
+ if (record->event.pressed) {
+ // when keycode QMKBEST is pressed
+ SEND_STRING("QMK is the best thing ever!");
+ } else {
+ // when keycode QMKBEST is released
+ }
+ break;
+ case QMKURL:
+ if (record->event.pressed) {
+ // when keycode QMKURL is pressed
+ SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+ } else {
+ // when keycode QMKURL is released
+ }
+ break;
+ }
+ return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for ergodicity
--- /dev/null
+# Ergodicity
+
+
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [nooges/bakingpy](https://github.com/nooges)
+Hardware Supported: Ergodicity PCB w/ATmega32u4
+Hardware Availability: [Keebio](https://keeb.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make keebio/ergodicity:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
projects / qmk_firmware.git / commitdiff