#include "gdisp_lld_config.h"
#include "src/gdisp/gdisp_driver.h"
-#include "board_IS31FL3731C.h"
+#include "board_is31fl3731c.h"
// Can't include led_tables from here
#include "gdisp_lld_config.h"
#include "src/gdisp/gdisp_driver.h"
-#include "board_ST7565.h"
+#include "board_st7565.h"
/*===========================================================================*/
/* Driver local definitions. */
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
- 400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-static const uint8_t led_mask[] = {
- 0xFF, 0x00, /* C1-1 -> C1-16 */
- 0xFF, 0x00, /* C2-1 -> C2-16 */
- 0xFF, 0x00, /* C3-1 -> C3-16 */
- 0xFF, 0x00, /* C4-1 -> C4-16 */
- 0x3F, 0x00, /* C5-1 -> C5-16 */
- 0x00, 0x00, /* C6-1 -> C6-16 */
- 0x00, 0x00, /* C7-1 -> C7-16 */
- 0x00, 0x00, /* C8-1 -> C8-16 */
- 0x00, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-// 45 44 43 42 41 40 39
- { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-// 52 51 50 49 48 47 46
- { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-// 58 57 56 55 54 53 N/A
- { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-// 67 66 65 64 63 62 61
- { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-// 76 75 74 73 72 60 59
- { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-// N/A N/A N/A N/A N/A N/A 68
- { NA, NA, NA, NA, NA, NA, LA(5, 4) },
-// N/A N/A N/A N/A 71 70 69
- { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) },
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- /* I2C pins */
- palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
- palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
- palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
- palClearPad(GPIOB, 16);
- /* start I2C */
- i2cStart(&I2CD1, &i2ccfg);
- // try high drive (from kiibohd)
- I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
- // try glitch fixing (from kiibohd)
- I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
- (void) g;
- return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
- (void) g;
- return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
- (void) g;
- if(!shutdown) {
- palSetPad(GPIOB, 16);
- }
- else {
- palClearPad(GPIOB, 16);
- }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
+++ /dev/null
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
- ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
- palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
- // Operation complete callback or @p NULL.
- .end_cb = NULL,
- //The chip select line port - when not using pcs.
- .ssport = ST7565_GPIOPORT,
- // brief The chip select line pad number - when not using pcs.
- .sspad=ST7565_SS_PIN,
- // SPI initialization data.
- .tar0 =
- SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
- | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
- | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
- | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
- | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
- | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to acquire
- // spiAcquireBus(&SPID1);
- spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to release
- //spiReleaseBus(&SPID1);
- spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
- palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
- palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
- spiInit();
- spiStart(&SPID1, &spi1config);
- release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
- (void) g;
- if (state) {
- palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
- else {
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
- palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+ 400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+ 0xFF, 0x00, /* C1-1 -> C1-16 */
+ 0xFF, 0x00, /* C2-1 -> C2-16 */
+ 0xFF, 0x00, /* C3-1 -> C3-16 */
+ 0xFF, 0x00, /* C4-1 -> C4-16 */
+ 0x3F, 0x00, /* C5-1 -> C5-16 */
+ 0x00, 0x00, /* C6-1 -> C6-16 */
+ 0x00, 0x00, /* C7-1 -> C7-16 */
+ 0x00, 0x00, /* C8-1 -> C8-16 */
+ 0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+// 45 44 43 42 41 40 39
+ { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+// 52 51 50 49 48 47 46
+ { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+// 58 57 56 55 54 53 N/A
+ { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+// 67 66 65 64 63 62 61
+ { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+// 76 75 74 73 72 60 59
+ { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+// N/A N/A N/A N/A N/A N/A 68
+ { NA, NA, NA, NA, NA, NA, LA(5, 4) },
+// N/A N/A N/A N/A 71 70 69
+ { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ /* I2C pins */
+ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+ palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palClearPad(GPIOB, 16);
+ /* start I2C */
+ i2cStart(&I2CD1, &i2ccfg);
+ // try high drive (from kiibohd)
+ I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+ // try glitch fixing (from kiibohd)
+ I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+ (void) g;
+ return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+ (void) g;
+ return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+ (void) g;
+ if(!shutdown) {
+ palSetPad(GPIOB, 16);
+ }
+ else {
+ palClearPad(GPIOB, 16);
+ }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
--- /dev/null
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER 0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+ ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+ palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+ // Operation complete callback or @p NULL.
+ .end_cb = NULL,
+ //The chip select line port - when not using pcs.
+ .ssport = ST7565_GPIOPORT,
+ // brief The chip select line pad number - when not using pcs.
+ .sspad=ST7565_SS_PIN,
+ // SPI initialization data.
+ .tar0 =
+ SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+ | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+ | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+ | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+ | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+ | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+};
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to acquire
+ // spiAcquireBus(&SPID1);
+ spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to release
+ //spiReleaseBus(&SPID1);
+ spiUnselect(&SPID1);
+}
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+ palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+ palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+ palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+
+ spiInit();
+ spiStart(&SPID1, &spi1config);
+ release_bus(g);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+ (void) g;
+ if (state) {
+ palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ }
+ else {
+ palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ }
+}
+
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+ palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
- 400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-static const uint8_t led_mask[] = {
- 0xFF, 0x00, /* C1-1 -> C1-16 */
- 0xFF, 0x00, /* C2-1 -> C2-16 */
- 0xFF, 0x00, /* C3-1 -> C3-16 */
- 0xFF, 0x00, /* C4-1 -> C4-16 */
- 0xFF, 0x00, /* C5-1 -> C5-16 */
- 0xFF, 0x00, /* C6-1 -> C6-16 */
- 0xFF, 0x00, /* C7-1 -> C7-16 */
- 0xFF, 0x00, /* C8-1 -> C8-16 */
- 0xFE, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
-// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
-// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
- { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
-// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
- { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
-// 62 63 64 65 66 67 68 69 70 71
- { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- /* I2C pins */
- palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
- palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
- palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
- palClearPad(GPIOB, 16);
- /* start I2C */
- i2cStart(&I2CD1, &i2ccfg);
- // try high drive (from kiibohd)
- I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
- // try glitch fixing (from kiibohd)
- I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
- (void) g;
- return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
- (void) g;
- return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
- (void) g;
- if(!shutdown) {
- palSetPad(GPIOB, 16);
- }
- else {
- palClearPad(GPIOB, 16);
- }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+ 400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+ 0xFF, 0x00, /* C1-1 -> C1-16 */
+ 0xFF, 0x00, /* C2-1 -> C2-16 */
+ 0xFF, 0x00, /* C3-1 -> C3-16 */
+ 0xFF, 0x00, /* C4-1 -> C4-16 */
+ 0xFF, 0x00, /* C5-1 -> C5-16 */
+ 0xFF, 0x00, /* C6-1 -> C6-16 */
+ 0xFF, 0x00, /* C7-1 -> C7-16 */
+ 0xFF, 0x00, /* C8-1 -> C8-16 */
+ 0xFE, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
+// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
+// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
+ { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
+// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
+ { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
+// 62 63 64 65 66 67 68 69 70 71
+ { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ /* I2C pins */
+ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+ palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palClearPad(GPIOB, 16);
+ /* start I2C */
+ i2cStart(&I2CD1, &i2ccfg);
+ // try high drive (from kiibohd)
+ I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+ // try glitch fixing (from kiibohd)
+ I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+ (void) g;
+ return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+ (void) g;
+ return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+ (void) g;
+ if(!shutdown) {
+ palSetPad(GPIOB, 16);
+ }
+ else {
+ palClearPad(GPIOB, 16);
+ }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
projects / qmk_firmware.git / commitdiff