send_cmd2(SetChargePump, 0x14 /* Enable */);
send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-/// Flips the display orientation 0 degrees
- send_cmd1(SegRemap | 0x1);
- send_cmd1(ComScanDec);
-/*
+#ifdef OLED_ROTATE180
// the following Flip the display orientation 180 degrees
send_cmd1(SegRemap);
send_cmd1(ComScanInc);
-// end flip */
+#endif
+#ifndef OLED_ROTATE180
+// Flips the display orientation 0 degrees
+ send_cmd1(SegRemap | 0x1);
+ send_cmd1(ComScanDec);
+#endif
+
send_cmd2(SetComPins, 0x2);
send_cmd2(SetContrast, 0x8f);
send_cmd2(SetPreCharge, 0xf1);
matrix_render(&display);
}
-__attribute__((weak))
+__attribute__ ((weak))
void iota_gfx_task_user(void) {
-
}
void iota_gfx_task(void) {
void iota_gfx_write_P(const char *data);
void iota_gfx_clear_screen(void);
-__attribute__((weak))
void iota_gfx_task_user(void);
void matrix_clear(struct CharacterMatrix *matrix);
#define USE_I2C
#define SSD1306OLED
+#define OLED_ROTATE180
/* ws2812 RGB LED*/
#define RGB_DI_PIN D4
return MACRO_NONE;
}
+
+void matrix_update(struct CharacterMatrix *dest,
+ const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+#endif
+
+ struct CharacterMatrix matrix;
+
+ matrix_clear(&matrix);
+ matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+ switch (USB_DeviceState) {
+ case DEVICE_STATE_Unattached:
+ matrix_write_P(&matrix, PSTR("Unattached"));
+ break;
+ case DEVICE_STATE_Suspended:
+ matrix_write_P(&matrix, PSTR("Suspended"));
+ break;
+ case DEVICE_STATE_Configured:
+ matrix_write_P(&matrix, PSTR("Connected"));
+ break;
+ case DEVICE_STATE_Powered:
+ matrix_write_P(&matrix, PSTR("Powered"));
+ break;
+ case DEVICE_STATE_Default:
+ matrix_write_P(&matrix, PSTR("Default"));
+ break;
+ case DEVICE_STATE_Addressed:
+ matrix_write_P(&matrix, PSTR("Addressed"));
+ break;
+ default:
+ matrix_write_P(&matrix, PSTR("Invalid"));
+ }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+ char buf[40];
+ snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+ matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+ switch (layer_state) {
+ case L_BASE:
+ matrix_write_P(&matrix, PSTR("Default"));
+ break;
+ case L_RAISE:
+ matrix_write_P(&matrix, PSTR("Raise"));
+ break;
+ case L_LOWER:
+ matrix_write_P(&matrix, PSTR("Lower"));
+ break;
+ case L_ADJUST:
+ matrix_write_P(&matrix, PSTR("ADJUST"));
+ break;
+ default:
+ matrix_write(&matrix, buf);
+ }
+
+ // Host Keyboard LED Status
+ char led[40];
+ snprintf(led, sizeof(led), "\n%s %s %s",
+ (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
+ matrix_write(&matrix, led);
+ matrix_update(&display, &matrix);
+}
+
#define USE_I2C
#define SSD1306OLED
+#define OLED_ROTATE180
/* ws2812 RGB LED*/
#define RGB_DI_PIN D4
return MACRO_NONE;
}
+
+void matrix_update(struct CharacterMatrix *dest,
+ const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+#endif
+
+ struct CharacterMatrix matrix;
+
+ matrix_clear(&matrix);
+ matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+ switch (USB_DeviceState) {
+ case DEVICE_STATE_Unattached:
+ matrix_write_P(&matrix, PSTR("Unattached"));
+ break;
+ case DEVICE_STATE_Suspended:
+ matrix_write_P(&matrix, PSTR("Suspended"));
+ break;
+ case DEVICE_STATE_Configured:
+ matrix_write_P(&matrix, PSTR("Connected"));
+ break;
+ case DEVICE_STATE_Powered:
+ matrix_write_P(&matrix, PSTR("Powered"));
+ break;
+ case DEVICE_STATE_Default:
+ matrix_write_P(&matrix, PSTR("Default"));
+ break;
+ case DEVICE_STATE_Addressed:
+ matrix_write_P(&matrix, PSTR("Addressed"));
+ break;
+ default:
+ matrix_write_P(&matrix, PSTR("Invalid"));
+ }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+ char buf[40];
+ snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+ matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+ switch (layer_state) {
+ case L_BASE:
+ matrix_write_P(&matrix, PSTR("Default"));
+ break;
+ case L_RAISE:
+ matrix_write_P(&matrix, PSTR("Raise"));
+ break;
+ case L_LOWER:
+ matrix_write_P(&matrix, PSTR("Lower"));
+ break;
+ case L_ADJUST:
+ matrix_write_P(&matrix, PSTR("ADJUST"));
+ break;
+ default:
+ matrix_write(&matrix, buf);
+ }
+
+ // Host Keyboard LED Status
+ char led[40];
+ snprintf(led, sizeof(led), "\n%s %s %s",
+ (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
+ matrix_write(&matrix, led);
+ matrix_update(&display, &matrix);
+}
#define FLIP_HALF
#define SSD1306OLED
+//#define OLED_ROTATE180
#define PREVENT_STUCK_MODIFIERS
return MACRO_NONE;
}
+
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
}
}
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
void iota_gfx_task_user(void) {
#if DEBUG_TO_SCREEN
if (debug_enable) {
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
matrix_write_P(&matrix, PSTR("\n\nLayer: "));
switch (layer_state) {
- case _QWERTY:
- case _COLEMAK:
- case _DVORAK:
+ case L_BASE:
matrix_write_P(&matrix, PSTR("Default"));
break;
- case _RAISE:
+ case L_RAISE:
matrix_write_P(&matrix, PSTR("Raise"));
break;
- case _LOWER:
+ case L_LOWER:
matrix_write_P(&matrix, PSTR("Lower"));
break;
- case _ADJUST:
+ case L_ADJUST:
matrix_write_P(&matrix, PSTR("ADJUST"));
break;
default: