+error_occurred=0;\
$($(TEST)_COMMAND)\
if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
+
+
endef
# Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps
QUANTUM_DIR = quantum
QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR)
+DRIVER_DIR = drivers
+DRIVER_PATH = $(TOP_DIR)/$(DRIVER_DIR)
+
BUILD_DIR := $(TOP_DIR)/.build
COMMON_VPATH := $(TOP_DIR)
COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
COMMON_VPATH += $(QUANTUM_PATH)/audio
COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
-COMMON_VPATH += $(QUANTUM_PATH)/api
\ No newline at end of file
+COMMON_VPATH += $(QUANTUM_PATH)/api
+COMMON_VPATH += $(DRIVER_PATH)
\ No newline at end of file
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
OPT_DEFS += -DRGBLIGHT_ENABLE
- SRC += $(QUANTUM_DIR)/light_ws2812.c
+ SRC += ws2812.c
SRC += $(QUANTUM_DIR)/rgblight.c
CIE1931_CURVE = yes
LED_BREATHING_TABLE = yes
--- /dev/null
+/* Copyright 2015 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Simple analog to digitial conversion
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <stdint.h>
+#include "analog.h"
+
+
+static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
+
+
+void analogReference(uint8_t mode)
+{
+ aref = mode & 0xC0;
+}
+
+
+// Arduino compatible pin input
+int16_t analogRead(uint8_t pin)
+{
+#if defined(__AVR_ATmega32U4__)
+ static const uint8_t PROGMEM pin_to_mux[] = {
+ 0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
+ 0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
+ if (pin >= 12) return 0;
+ return adc_read(pgm_read_byte(pin_to_mux + pin));
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+ if (pin >= 8) return 0;
+ return adc_read(pin);
+#else
+ return 0;
+#endif
+}
+
+// Mux input
+int16_t adc_read(uint8_t mux)
+{
+#if defined(__AVR_AT90USB162__)
+ return 0;
+#else
+ uint8_t low;
+
+ ADCSRA = (1<<ADEN) | ADC_PRESCALER; // enable ADC
+ ADCSRB = (1<<ADHSM) | (mux & 0x20); // high speed mode
+ ADMUX = aref | (mux & 0x1F); // configure mux input
+ ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC); // start the conversion
+ while (ADCSRA & (1<<ADSC)) ; // wait for result
+ low = ADCL; // must read LSB first
+ return (ADCH << 8) | low; // must read MSB only once!
+#endif
+}
+
+
--- /dev/null
+/* Copyright 2015 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _analog_h_included__
+#define _analog_h_included__
+
+#include <stdint.h>
+
+void analogReference(uint8_t mode);
+int16_t analogRead(uint8_t pin);
+int16_t adc_read(uint8_t mux);
+
+#define ADC_REF_POWER (1<<REFS0)
+#define ADC_REF_INTERNAL ((1<<REFS1) | (1<<REFS0))
+#define ADC_REF_EXTERNAL (0)
+
+// These prescaler values are for high speed mode, ADHSM = 1
+#if F_CPU == 16000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
+#elif F_CPU == 8000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
+#elif F_CPU == 4000000L
+#define ADC_PRESCALER ((1<<ADPS2))
+#elif F_CPU == 2000000L
+#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
+#elif F_CPU == 1000000L
+#define ADC_PRESCALER ((1<<ADPS1))
+#else
+#define ADC_PRESCALER ((1<<ADPS0))
+#endif
+
+// some avr-libc versions do not properly define ADHSM
+#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+#if !defined(ADHSM)
+#define ADHSM (7)
+#endif
+#endif
+
+#endif
--- /dev/null
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+static const unsigned char font[] PROGMEM = {
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
+ 0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
+ 0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
+ 0x18, 0x3C, 0x7E, 0x3C, 0x18,
+ 0x1C, 0x57, 0x7D, 0x57, 0x1C,
+ 0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
+ 0x00, 0x18, 0x3C, 0x18, 0x00,
+ 0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
+ 0x00, 0x18, 0x24, 0x18, 0x00,
+ 0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
+ 0x30, 0x48, 0x3A, 0x06, 0x0E,
+ 0x26, 0x29, 0x79, 0x29, 0x26,
+ 0x40, 0x7F, 0x05, 0x05, 0x07,
+ 0x40, 0x7F, 0x05, 0x25, 0x3F,
+ 0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
+ 0x7F, 0x3E, 0x1C, 0x1C, 0x08,
+ 0x08, 0x1C, 0x1C, 0x3E, 0x7F,
+ 0x14, 0x22, 0x7F, 0x22, 0x14,
+ 0x5F, 0x5F, 0x00, 0x5F, 0x5F,
+ 0x06, 0x09, 0x7F, 0x01, 0x7F,
+ 0x00, 0x66, 0x89, 0x95, 0x6A,
+ 0x60, 0x60, 0x60, 0x60, 0x60,
+ 0x94, 0xA2, 0xFF, 0xA2, 0x94,
+ 0x08, 0x04, 0x7E, 0x04, 0x08,
+ 0x10, 0x20, 0x7E, 0x20, 0x10,
+ 0x08, 0x08, 0x2A, 0x1C, 0x08,
+ 0x08, 0x1C, 0x2A, 0x08, 0x08,
+ 0x1E, 0x10, 0x10, 0x10, 0x10,
+ 0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+ 0x30, 0x38, 0x3E, 0x38, 0x30,
+ 0x06, 0x0E, 0x3E, 0x0E, 0x06,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x5F, 0x00, 0x00,
+ 0x00, 0x07, 0x00, 0x07, 0x00,
+ 0x14, 0x7F, 0x14, 0x7F, 0x14,
+ 0x24, 0x2A, 0x7F, 0x2A, 0x12,
+ 0x23, 0x13, 0x08, 0x64, 0x62,
+ 0x36, 0x49, 0x56, 0x20, 0x50,
+ 0x00, 0x08, 0x07, 0x03, 0x00,
+ 0x00, 0x1C, 0x22, 0x41, 0x00,
+ 0x00, 0x41, 0x22, 0x1C, 0x00,
+ 0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
+ 0x08, 0x08, 0x3E, 0x08, 0x08,
+ 0x00, 0x80, 0x70, 0x30, 0x00,
+ 0x08, 0x08, 0x08, 0x08, 0x08,
+ 0x00, 0x00, 0x60, 0x60, 0x00,
+ 0x20, 0x10, 0x08, 0x04, 0x02,
+ 0x3E, 0x51, 0x49, 0x45, 0x3E,
+ 0x00, 0x42, 0x7F, 0x40, 0x00,
+ 0x72, 0x49, 0x49, 0x49, 0x46,
+ 0x21, 0x41, 0x49, 0x4D, 0x33,
+ 0x18, 0x14, 0x12, 0x7F, 0x10,
+ 0x27, 0x45, 0x45, 0x45, 0x39,
+ 0x3C, 0x4A, 0x49, 0x49, 0x31,
+ 0x41, 0x21, 0x11, 0x09, 0x07,
+ 0x36, 0x49, 0x49, 0x49, 0x36,
+ 0x46, 0x49, 0x49, 0x29, 0x1E,
+ 0x00, 0x00, 0x14, 0x00, 0x00,
+ 0x00, 0x40, 0x34, 0x00, 0x00,
+ 0x00, 0x08, 0x14, 0x22, 0x41,
+ 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x00, 0x41, 0x22, 0x14, 0x08,
+ 0x02, 0x01, 0x59, 0x09, 0x06,
+ 0x3E, 0x41, 0x5D, 0x59, 0x4E,
+ 0x7C, 0x12, 0x11, 0x12, 0x7C,
+ 0x7F, 0x49, 0x49, 0x49, 0x36,
+ 0x3E, 0x41, 0x41, 0x41, 0x22,
+ 0x7F, 0x41, 0x41, 0x41, 0x3E,
+ 0x7F, 0x49, 0x49, 0x49, 0x41,
+ 0x7F, 0x09, 0x09, 0x09, 0x01,
+ 0x3E, 0x41, 0x41, 0x51, 0x73,
+ 0x7F, 0x08, 0x08, 0x08, 0x7F,
+ 0x00, 0x41, 0x7F, 0x41, 0x00,
+ 0x20, 0x40, 0x41, 0x3F, 0x01,
+ 0x7F, 0x08, 0x14, 0x22, 0x41,
+ 0x7F, 0x40, 0x40, 0x40, 0x40,
+ 0x7F, 0x02, 0x1C, 0x02, 0x7F,
+ 0x7F, 0x04, 0x08, 0x10, 0x7F,
+ 0x3E, 0x41, 0x41, 0x41, 0x3E,
+ 0x7F, 0x09, 0x09, 0x09, 0x06,
+ 0x3E, 0x41, 0x51, 0x21, 0x5E,
+ 0x7F, 0x09, 0x19, 0x29, 0x46,
+ 0x26, 0x49, 0x49, 0x49, 0x32,
+ 0x03, 0x01, 0x7F, 0x01, 0x03,
+ 0x3F, 0x40, 0x40, 0x40, 0x3F,
+ 0x1F, 0x20, 0x40, 0x20, 0x1F,
+ 0x3F, 0x40, 0x38, 0x40, 0x3F,
+ 0x63, 0x14, 0x08, 0x14, 0x63,
+ 0x03, 0x04, 0x78, 0x04, 0x03,
+ 0x61, 0x59, 0x49, 0x4D, 0x43,
+ 0x00, 0x7F, 0x41, 0x41, 0x41,
+ 0x02, 0x04, 0x08, 0x10, 0x20,
+ 0x00, 0x41, 0x41, 0x41, 0x7F,
+ 0x04, 0x02, 0x01, 0x02, 0x04,
+ 0x40, 0x40, 0x40, 0x40, 0x40,
+ 0x00, 0x03, 0x07, 0x08, 0x00,
+ 0x20, 0x54, 0x54, 0x78, 0x40,
+ 0x7F, 0x28, 0x44, 0x44, 0x38,
+ 0x38, 0x44, 0x44, 0x44, 0x28,
+ 0x38, 0x44, 0x44, 0x28, 0x7F,
+ 0x38, 0x54, 0x54, 0x54, 0x18,
+ 0x00, 0x08, 0x7E, 0x09, 0x02,
+ 0x18, 0xA4, 0xA4, 0x9C, 0x78,
+ 0x7F, 0x08, 0x04, 0x04, 0x78,
+ 0x00, 0x44, 0x7D, 0x40, 0x00,
+ 0x20, 0x40, 0x40, 0x3D, 0x00,
+ 0x7F, 0x10, 0x28, 0x44, 0x00,
+ 0x00, 0x41, 0x7F, 0x40, 0x00,
+ 0x7C, 0x04, 0x78, 0x04, 0x78,
+ 0x7C, 0x08, 0x04, 0x04, 0x78,
+ 0x38, 0x44, 0x44, 0x44, 0x38,
+ 0xFC, 0x18, 0x24, 0x24, 0x18,
+ 0x18, 0x24, 0x24, 0x18, 0xFC,
+ 0x7C, 0x08, 0x04, 0x04, 0x08,
+ 0x48, 0x54, 0x54, 0x54, 0x24,
+ 0x04, 0x04, 0x3F, 0x44, 0x24,
+ 0x3C, 0x40, 0x40, 0x20, 0x7C,
+ 0x1C, 0x20, 0x40, 0x20, 0x1C,
+ 0x3C, 0x40, 0x30, 0x40, 0x3C,
+ 0x44, 0x28, 0x10, 0x28, 0x44,
+ 0x4C, 0x90, 0x90, 0x90, 0x7C,
+ 0x44, 0x64, 0x54, 0x4C, 0x44,
+ 0x00, 0x08, 0x36, 0x41, 0x00,
+ 0x00, 0x00, 0x77, 0x00, 0x00,
+ 0x00, 0x41, 0x36, 0x08, 0x00,
+ 0x02, 0x01, 0x02, 0x04, 0x02,
+ 0x3C, 0x26, 0x23, 0x26, 0x3C,
+ 0x1E, 0xA1, 0xA1, 0x61, 0x12,
+ 0x3A, 0x40, 0x40, 0x20, 0x7A,
+ 0x38, 0x54, 0x54, 0x55, 0x59,
+ 0x21, 0x55, 0x55, 0x79, 0x41,
+ 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
+ 0x21, 0x55, 0x54, 0x78, 0x40,
+ 0x20, 0x54, 0x55, 0x79, 0x40,
+ 0x0C, 0x1E, 0x52, 0x72, 0x12,
+ 0x39, 0x55, 0x55, 0x55, 0x59,
+ 0x39, 0x54, 0x54, 0x54, 0x59,
+ 0x39, 0x55, 0x54, 0x54, 0x58,
+ 0x00, 0x00, 0x45, 0x7C, 0x41,
+ 0x00, 0x02, 0x45, 0x7D, 0x42,
+ 0x00, 0x01, 0x45, 0x7C, 0x40,
+ 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
+ 0xF0, 0x28, 0x25, 0x28, 0xF0,
+ 0x7C, 0x54, 0x55, 0x45, 0x00,
+ 0x20, 0x54, 0x54, 0x7C, 0x54,
+ 0x7C, 0x0A, 0x09, 0x7F, 0x49,
+ 0x32, 0x49, 0x49, 0x49, 0x32,
+ 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
+ 0x32, 0x4A, 0x48, 0x48, 0x30,
+ 0x3A, 0x41, 0x41, 0x21, 0x7A,
+ 0x3A, 0x42, 0x40, 0x20, 0x78,
+ 0x00, 0x9D, 0xA0, 0xA0, 0x7D,
+ 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
+ 0x3D, 0x40, 0x40, 0x40, 0x3D,
+ 0x3C, 0x24, 0xFF, 0x24, 0x24,
+ 0x48, 0x7E, 0x49, 0x43, 0x66,
+ 0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
+ 0xFF, 0x09, 0x29, 0xF6, 0x20,
+ 0xC0, 0x88, 0x7E, 0x09, 0x03,
+ 0x20, 0x54, 0x54, 0x79, 0x41,
+ 0x00, 0x00, 0x44, 0x7D, 0x41,
+ 0x30, 0x48, 0x48, 0x4A, 0x32,
+ 0x38, 0x40, 0x40, 0x22, 0x7A,
+ 0x00, 0x7A, 0x0A, 0x0A, 0x72,
+ 0x7D, 0x0D, 0x19, 0x31, 0x7D,
+ 0x26, 0x29, 0x29, 0x2F, 0x28,
+ 0x26, 0x29, 0x29, 0x29, 0x26,
+ 0x30, 0x48, 0x4D, 0x40, 0x20,
+ 0x38, 0x08, 0x08, 0x08, 0x08,
+ 0x08, 0x08, 0x08, 0x08, 0x38,
+ 0x2F, 0x10, 0xC8, 0xAC, 0xBA,
+ 0x2F, 0x10, 0x28, 0x34, 0xFA,
+ 0x00, 0x00, 0x7B, 0x00, 0x00,
+ 0x08, 0x14, 0x2A, 0x14, 0x22,
+ 0x22, 0x14, 0x2A, 0x14, 0x08,
+ 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
+ 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
+ 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
+ 0x00, 0x00, 0x00, 0xFF, 0x00,
+ 0x10, 0x10, 0x10, 0xFF, 0x00,
+ 0x14, 0x14, 0x14, 0xFF, 0x00,
+ 0x10, 0x10, 0xFF, 0x00, 0xFF,
+ 0x10, 0x10, 0xF0, 0x10, 0xF0,
+ 0x14, 0x14, 0x14, 0xFC, 0x00,
+ 0x14, 0x14, 0xF7, 0x00, 0xFF,
+ 0x00, 0x00, 0xFF, 0x00, 0xFF,
+ 0x14, 0x14, 0xF4, 0x04, 0xFC,
+ 0x14, 0x14, 0x17, 0x10, 0x1F,
+ 0x10, 0x10, 0x1F, 0x10, 0x1F,
+ 0x14, 0x14, 0x14, 0x1F, 0x00,
+ 0x10, 0x10, 0x10, 0xF0, 0x00,
+ 0x00, 0x00, 0x00, 0x1F, 0x10,
+ 0x10, 0x10, 0x10, 0x1F, 0x10,
+ 0x10, 0x10, 0x10, 0xF0, 0x10,
+ 0x00, 0x00, 0x00, 0xFF, 0x10,
+ 0x10, 0x10, 0x10, 0x10, 0x10,
+ 0x10, 0x10, 0x10, 0xFF, 0x10,
+ 0x00, 0x00, 0x00, 0xFF, 0x14,
+ 0x00, 0x00, 0xFF, 0x00, 0xFF,
+ 0x00, 0x00, 0x1F, 0x10, 0x17,
+ 0x00, 0x00, 0xFC, 0x04, 0xF4,
+ 0x14, 0x14, 0x17, 0x10, 0x17,
+ 0x14, 0x14, 0xF4, 0x04, 0xF4,
+ 0x00, 0x00, 0xFF, 0x00, 0xF7,
+ 0x14, 0x14, 0x14, 0x14, 0x14,
+ 0x14, 0x14, 0xF7, 0x00, 0xF7,
+ 0x14, 0x14, 0x14, 0x17, 0x14,
+ 0x10, 0x10, 0x1F, 0x10, 0x1F,
+ 0x14, 0x14, 0x14, 0xF4, 0x14,
+ 0x10, 0x10, 0xF0, 0x10, 0xF0,
+ 0x00, 0x00, 0x1F, 0x10, 0x1F,
+ 0x00, 0x00, 0x00, 0x1F, 0x14,
+ 0x00, 0x00, 0x00, 0xFC, 0x14,
+ 0x00, 0x00, 0xF0, 0x10, 0xF0,
+ 0x10, 0x10, 0xFF, 0x10, 0xFF,
+ 0x14, 0x14, 0x14, 0xFF, 0x14,
+ 0x10, 0x10, 0x10, 0x1F, 0x00,
+ 0x00, 0x00, 0x00, 0xF0, 0x10,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
+ 0xFF, 0xFF, 0xFF, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xFF, 0xFF,
+ 0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
+ 0x38, 0x44, 0x44, 0x38, 0x44,
+ 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
+ 0x7E, 0x02, 0x02, 0x06, 0x06,
+ 0x02, 0x7E, 0x02, 0x7E, 0x02,
+ 0x63, 0x55, 0x49, 0x41, 0x63,
+ 0x38, 0x44, 0x44, 0x3C, 0x04,
+ 0x40, 0x7E, 0x20, 0x1E, 0x20,
+ 0x06, 0x02, 0x7E, 0x02, 0x02,
+ 0x99, 0xA5, 0xE7, 0xA5, 0x99,
+ 0x1C, 0x2A, 0x49, 0x2A, 0x1C,
+ 0x4C, 0x72, 0x01, 0x72, 0x4C,
+ 0x30, 0x4A, 0x4D, 0x4D, 0x30,
+ 0x30, 0x48, 0x78, 0x48, 0x30,
+ 0xBC, 0x62, 0x5A, 0x46, 0x3D,
+ 0x3E, 0x49, 0x49, 0x49, 0x00,
+ 0x7E, 0x01, 0x01, 0x01, 0x7E,
+ 0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
+ 0x44, 0x44, 0x5F, 0x44, 0x44,
+ 0x40, 0x51, 0x4A, 0x44, 0x40,
+ 0x40, 0x44, 0x4A, 0x51, 0x40,
+ 0x00, 0x00, 0xFF, 0x01, 0x03,
+ 0xE0, 0x80, 0xFF, 0x00, 0x00,
+ 0x08, 0x08, 0x6B, 0x6B, 0x08,
+ 0x36, 0x12, 0x36, 0x24, 0x36,
+ 0x06, 0x0F, 0x09, 0x0F, 0x06,
+ 0x00, 0x00, 0x18, 0x18, 0x00,
+ 0x00, 0x00, 0x10, 0x10, 0x00,
+ 0x30, 0x40, 0xFF, 0x01, 0x01,
+ 0x00, 0x1F, 0x01, 0x01, 0x1E,
+ 0x00, 0x19, 0x1D, 0x17, 0x12,
+ 0x00, 0x3C, 0x3C, 0x3C, 0x3C,
+ 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP
+};
+#endif // FONT5X7_H
--- /dev/null
+/*
+ pins_arduino.h - Pin definition functions for Arduino
+ Part of Arduino - http://www.arduino.cc/
+
+ Copyright (c) 2007 David A. Mellis
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
+*/
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
+
+// Workaround for wrong definitions in "iom32u4.h".
+// This should be fixed in the AVR toolchain.
+#undef UHCON
+#undef UHINT
+#undef UHIEN
+#undef UHADDR
+#undef UHFNUM
+#undef UHFNUML
+#undef UHFNUMH
+#undef UHFLEN
+#undef UPINRQX
+#undef UPINTX
+#undef UPNUM
+#undef UPRST
+#undef UPCONX
+#undef UPCFG0X
+#undef UPCFG1X
+#undef UPSTAX
+#undef UPCFG2X
+#undef UPIENX
+#undef UPDATX
+#undef TCCR2A
+#undef WGM20
+#undef WGM21
+#undef COM2B0
+#undef COM2B1
+#undef COM2A0
+#undef COM2A1
+#undef TCCR2B
+#undef CS20
+#undef CS21
+#undef CS22
+#undef WGM22
+#undef FOC2B
+#undef FOC2A
+#undef TCNT2
+#undef TCNT2_0
+#undef TCNT2_1
+#undef TCNT2_2
+#undef TCNT2_3
+#undef TCNT2_4
+#undef TCNT2_5
+#undef TCNT2_6
+#undef TCNT2_7
+#undef OCR2A
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+#undef OCR2B
+#undef OCR2_0
+#undef OCR2_1
+#undef OCR2_2
+#undef OCR2_3
+#undef OCR2_4
+#undef OCR2_5
+#undef OCR2_6
+#undef OCR2_7
+
+#define NUM_DIGITAL_PINS 30
+#define NUM_ANALOG_INPUTS 12
+
+#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0)
+#define TXLED0 PORTD |= (1<<5)
+#define TXLED1 PORTD &= ~(1<<5)
+#define RXLED0 PORTB |= (1<<0)
+#define RXLED1 PORTB &= ~(1<<0)
+
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+#define LED_BUILTIN 13
+
+// Map SPI port to 'new' pins D14..D17
+static const uint8_t SS = 17;
+static const uint8_t MOSI = 16;
+static const uint8_t MISO = 14;
+static const uint8_t SCK = 15;
+
+// Mapping of analog pins as digital I/O
+// A6-A11 share with digital pins
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24; // D4
+static const uint8_t ADC7 = 25; // D6
+static const uint8_t ADC8 = 26; // D8
+static const uint8_t ADC9 = 27; // D9
+static const uint8_t ADC10 = 28; // D10
+static const uint8_t ADC11 = 29; // D12
+
+#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICRbit(p) 0
+#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+
+// __AVR_ATmega32U4__ has an unusual mapping of pins to channels
+extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
+#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+
+#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
+
+#ifdef ARDUINO_MAIN
+
+// On the Arduino board, digital pins are also used
+// for the analog output (software PWM). Analog input
+// pins are a separate set.
+
+// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
+//
+// D0 PD2 RXD1/INT2
+// D1 PD3 TXD1/INT3
+// D2 PD1 SDA SDA/INT1
+// D3# PD0 PWM8/SCL OC0B/SCL/INT0
+// D4 A6 PD4 ADC8
+// D5# PC6 ??? OC3A/#OC4A
+// D6# A7 PD7 FastPWM #OC4D/ADC10
+// D7 PE6 INT6/AIN0
+//
+// D8 A8 PB4 ADC11/PCINT4
+// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5
+// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6
+// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7
+// D12 A11 PD6 T1/#OC4D/ADC9
+// D13# PC7 PWM10 CLK0/OC4A
+//
+// A0 D18 PF7 ADC7
+// A1 D19 PF6 ADC6
+// A2 D20 PF5 ADC5
+// A3 D21 PF4 ADC4
+// A4 D22 PF1 ADC1
+// A5 D23 PF0 ADC0
+//
+// New pins D14..D17 to map SPI port to digital pins
+//
+// MISO D14 PB3 MISO,PCINT3
+// SCK D15 PB1 SCK,PCINT1
+// MOSI D16 PB2 MOSI,PCINT2
+// SS D17 PB0 RXLED,SS/PCINT0
+//
+// Connected LEDs on board for TX and RX
+// TXLED D24 PD5 XCK1
+// RXLED D17 PB0
+// HWB PE2 HWB
+
+// these arrays map port names (e.g. port B) to the
+// appropriate addresses for various functions (e.g. reading
+// and writing)
+const uint16_t PROGMEM port_to_mode_PGM[] = {
+ NOT_A_PORT,
+ NOT_A_PORT,
+ (uint16_t) &DDRB,
+ (uint16_t) &DDRC,
+ (uint16_t) &DDRD,
+ (uint16_t) &DDRE,
+ (uint16_t) &DDRF,
+};
+
+const uint16_t PROGMEM port_to_output_PGM[] = {
+ NOT_A_PORT,
+ NOT_A_PORT,
+ (uint16_t) &PORTB,
+ (uint16_t) &PORTC,
+ (uint16_t) &PORTD,
+ (uint16_t) &PORTE,
+ (uint16_t) &PORTF,
+};
+
+const uint16_t PROGMEM port_to_input_PGM[] = {
+ NOT_A_PORT,
+ NOT_A_PORT,
+ (uint16_t) &PINB,
+ (uint16_t) &PINC,
+ (uint16_t) &PIND,
+ (uint16_t) &PINE,
+ (uint16_t) &PINF,
+};
+
+const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
+ PD, // D0 - PD2
+ PD, // D1 - PD3
+ PD, // D2 - PD1
+ PD, // D3 - PD0
+ PD, // D4 - PD4
+ PC, // D5 - PC6
+ PD, // D6 - PD7
+ PE, // D7 - PE6
+
+ PB, // D8 - PB4
+ PB, // D9 - PB5
+ PB, // D10 - PB6
+ PB, // D11 - PB7
+ PD, // D12 - PD6
+ PC, // D13 - PC7
+
+ PB, // D14 - MISO - PB3
+ PB, // D15 - SCK - PB1
+ PB, // D16 - MOSI - PB2
+ PB, // D17 - SS - PB0
+
+ PF, // D18 - A0 - PF7
+ PF, // D19 - A1 - PF6
+ PF, // D20 - A2 - PF5
+ PF, // D21 - A3 - PF4
+ PF, // D22 - A4 - PF1
+ PF, // D23 - A5 - PF0
+
+ PD, // D24 - PD5
+ PD, // D25 / D6 - A7 - PD7
+ PB, // D26 / D8 - A8 - PB4
+ PB, // D27 / D9 - A9 - PB5
+ PB, // D28 / D10 - A10 - PB6
+ PD, // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
+ _BV(2), // D0 - PD2
+ _BV(3), // D1 - PD3
+ _BV(1), // D2 - PD1
+ _BV(0), // D3 - PD0
+ _BV(4), // D4 - PD4
+ _BV(6), // D5 - PC6
+ _BV(7), // D6 - PD7
+ _BV(6), // D7 - PE6
+
+ _BV(4), // D8 - PB4
+ _BV(5), // D9 - PB5
+ _BV(6), // D10 - PB6
+ _BV(7), // D11 - PB7
+ _BV(6), // D12 - PD6
+ _BV(7), // D13 - PC7
+
+ _BV(3), // D14 - MISO - PB3
+ _BV(1), // D15 - SCK - PB1
+ _BV(2), // D16 - MOSI - PB2
+ _BV(0), // D17 - SS - PB0
+
+ _BV(7), // D18 - A0 - PF7
+ _BV(6), // D19 - A1 - PF6
+ _BV(5), // D20 - A2 - PF5
+ _BV(4), // D21 - A3 - PF4
+ _BV(1), // D22 - A4 - PF1
+ _BV(0), // D23 - A5 - PF0
+
+ _BV(5), // D24 - PD5
+ _BV(7), // D25 / D6 - A7 - PD7
+ _BV(4), // D26 / D8 - A8 - PB4
+ _BV(5), // D27 / D9 - A9 - PB5
+ _BV(6), // D28 / D10 - A10 - PB6
+ _BV(6), // D29 / D12 - A11 - PD6
+};
+
+const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ TIMER0B, /* 3 */
+ NOT_ON_TIMER,
+ TIMER3A, /* 5 */
+ TIMER4D, /* 6 */
+ NOT_ON_TIMER,
+
+ NOT_ON_TIMER,
+ TIMER1A, /* 9 */
+ TIMER1B, /* 10 */
+ TIMER0A, /* 11 */
+
+ NOT_ON_TIMER,
+ TIMER4A, /* 13 */
+
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+ NOT_ON_TIMER,
+};
+
+const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
+ 7, // A0 PF7 ADC7
+ 6, // A1 PF6 ADC6
+ 5, // A2 PF5 ADC5
+ 4, // A3 PF4 ADC4
+ 1, // A4 PF1 ADC1
+ 0, // A5 PF0 ADC0
+ 8, // A6 D4 PD4 ADC8
+ 10, // A7 D6 PD7 ADC10
+ 11, // A8 D8 PB4 ADC11
+ 12, // A9 D9 PB5 ADC12
+ 13, // A10 D10 PB6 ADC13
+ 9 // A11 D12 PD6 ADC9
+};
+
+#endif /* ARDUINO_MAIN */
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+// pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR Serial
+#define SERIAL_PORT_USBVIRTUAL Serial
+#define SERIAL_PORT_HARDWARE Serial1
+#define SERIAL_PORT_HARDWARE_OPEN Serial1
+
+#endif /* Pins_Arduino_h */
--- /dev/null
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "config.h"
+#include "i2c.h"
+#include <string.h>
+#include "print.h"
+#include "lets_split.h"
+#include "glcdfont.c"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "pincontrol.h"
+
+//assign the right code to your layers
+#define _BASE 0
+#define _LOWER 8
+#define _RAISE 16
+#define _FNLAYER 64
+#define _NUMLAY 128
+#define _NLOWER 136
+#define _NFNLAYER 192
+#define _MOUSECURSOR 256
+#define _ADJUST 65560
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble. Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#define i2cAddress 0x3C
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+ uint8_t display[MatrixRows][MatrixCols];
+ uint8_t *cursor;
+ bool dirty;
+};
+
+static struct CharacterMatrix display;
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+#define ScreenOffInterval 300000 /* milliseconds */
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+enum ssd1306_cmds {
+ DisplayOff = 0xAE,
+ DisplayOn = 0xAF,
+
+ SetContrast = 0x81,
+ DisplayAllOnResume = 0xA4,
+
+ DisplayAllOn = 0xA5,
+ NormalDisplay = 0xA6,
+ InvertDisplay = 0xA7,
+ SetDisplayOffset = 0xD3,
+ SetComPins = 0xda,
+ SetVComDetect = 0xdb,
+ SetDisplayClockDiv = 0xD5,
+ SetPreCharge = 0xd9,
+ SetMultiPlex = 0xa8,
+ SetLowColumn = 0x00,
+ SetHighColumn = 0x10,
+ SetStartLine = 0x40,
+
+ SetMemoryMode = 0x20,
+ ColumnAddr = 0x21,
+ PageAddr = 0x22,
+
+ ComScanInc = 0xc0,
+ ComScanDec = 0xc8,
+ SegRemap = 0xa0,
+ SetChargePump = 0x8d,
+ ExternalVcc = 0x01,
+ SwitchCapVcc = 0x02,
+
+ ActivateScroll = 0x2f,
+ DeActivateScroll = 0x2e,
+ SetVerticalScrollArea = 0xa3,
+ RightHorizontalScroll = 0x26,
+ LeftHorizontalScroll = 0x27,
+ VerticalAndRightHorizontalScroll = 0x29,
+ VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+ bool res = false;
+
+ if (i2c_start_write(i2cAddress)) {
+ xprintf("failed to start write to %d\n", i2cAddress);
+ goto done;
+ }
+
+ if (i2c_master_write(0x0 /* command byte follows */)) {
+ print("failed to write control byte\n");
+
+ goto done;
+ }
+
+ if (i2c_master_write(cmd)) {
+ xprintf("failed to write command %d\n", cmd);
+ goto done;
+ }
+ res = true;
+done:
+ i2c_master_stop();
+ return res;
+}
+
+// Write 2-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
+ if (!_send_cmd1(cmd)) {
+ return false;
+ }
+ return _send_cmd1(opr);
+}
+
+// Write 3-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
+ if (!_send_cmd1(cmd)) {
+ return false;
+ }
+ if (!_send_cmd1(opr1)) {
+ return false;
+ }
+ return _send_cmd1(opr2);
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
+#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+
+static void matrix_clear(struct CharacterMatrix *matrix);
+
+static void clear_display(void) {
+ matrix_clear(&display);
+
+ // Clear all of the display bits (there can be random noise
+ // in the RAM on startup)
+ send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+ send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+ if (i2c_start_write(i2cAddress)) {
+ goto done;
+ }
+ if (i2c_master_write(0x40)) {
+ // Data mode
+ goto done;
+ }
+ for (uint8_t row = 0; row < MatrixRows; ++row) {
+ for (uint8_t col = 0; col < DisplayWidth; ++col) {
+ i2c_master_write(0);
+ }
+ }
+
+ display.dirty = false;
+
+done:
+ i2c_master_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+ sendchar(c);
+ iota_gfx_write_char(c);
+
+ if (!displaying) {
+ iota_gfx_flush();
+ }
+ return 0;
+}
+#endif
+
+bool iota_gfx_init(void) {
+ bool success = false;
+
+ send_cmd1(DisplayOff);
+ send_cmd2(SetDisplayClockDiv, 0x80);
+ send_cmd2(SetMultiPlex, DisplayHeight - 1);
+
+ send_cmd2(SetDisplayOffset, 0);
+
+
+ send_cmd1(SetStartLine | 0x0);
+ send_cmd2(SetChargePump, 0x14 /* Enable */);
+ send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+
+/// Flips the display orientation 0 degrees
+ send_cmd1(SegRemap | 0x1);
+ send_cmd1(ComScanDec);
+/*
+// the following Flip the display orientation 180 degrees
+ send_cmd1(SegRemap);
+ send_cmd1(ComScanInc);
+// end flip */
+ send_cmd2(SetComPins, 0x2);
+ send_cmd2(SetContrast, 0x8f);
+ send_cmd2(SetPreCharge, 0xf1);
+ send_cmd2(SetVComDetect, 0x40);
+ send_cmd1(DisplayAllOnResume);
+ send_cmd1(NormalDisplay);
+ send_cmd1(DeActivateScroll);
+ send_cmd1(DisplayOn);
+
+ send_cmd2(SetContrast, 0); // Dim
+
+ clear_display();
+
+ success = true;
+
+ iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+ print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+ return success;
+}
+
+bool iota_gfx_off(void) {
+ bool success = false;
+
+ send_cmd1(DisplayOff);
+ success = true;
+
+done:
+ return success;
+}
+
+bool iota_gfx_on(void) {
+ bool success = false;
+
+ send_cmd1(DisplayOn);
+ success = true;
+
+done:
+ return success;
+}
+
+static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+ *matrix->cursor = c;
+ ++matrix->cursor;
+
+ if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+ // We went off the end; scroll the display upwards by one line
+ memmove(&matrix->display[0], &matrix->display[1],
+ MatrixCols * (MatrixRows - 1));
+ matrix->cursor = &matrix->display[MatrixRows - 1][0];
+ memset(matrix->cursor, ' ', MatrixCols);
+ }
+}
+
+static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+ matrix->dirty = true;
+
+ if (c == '\n') {
+ // Clear to end of line from the cursor and then move to the
+ // start of the next line
+ uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+ while (cursor_col++ < MatrixCols) {
+ matrix_write_char_inner(matrix, ' ');
+ }
+ return;
+ }
+
+ matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+ matrix_write_char(&display, c);
+}
+
+static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+ const char *end = data + strlen(data);
+ while (data < end) {
+ matrix_write_char(matrix, *data);
+ ++data;
+ }
+}
+
+void iota_gfx_write(const char *data) {
+ matrix_write(&display, data);
+}
+
+static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+ while (true) {
+ uint8_t c = pgm_read_byte(data);
+ if (c == 0) {
+ return;
+ }
+ matrix_write_char(matrix, c);
+ ++data;
+ }
+}
+
+void iota_gfx_write_P(const char *data) {
+ matrix_write_P(&display, data);
+}
+
+static void matrix_clear(struct CharacterMatrix *matrix) {
+ memset(matrix->display, ' ', sizeof(matrix->display));
+ matrix->cursor = &matrix->display[0][0];
+ matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+ matrix_clear(&display);
+}
+
+static void matrix_render(struct CharacterMatrix *matrix) {
+ last_flush = timer_read();
+ iota_gfx_on();
+#if DEBUG_TO_SCREEN
+ ++displaying;
+#endif
+
+ // Move to the home position
+ send_cmd3(PageAddr, 0, MatrixRows - 1);
+ send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+ if (i2c_start_write(i2cAddress)) {
+ goto done;
+ }
+ if (i2c_master_write(0x40)) {
+ // Data mode
+ goto done;
+ }
+
+ for (uint8_t row = 0; row < MatrixRows; ++row) {
+ for (uint8_t col = 0; col < MatrixCols; ++col) {
+ const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
+
+ for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
+ uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+ i2c_master_write(colBits);
+ }
+
+ // 1 column of space between chars (it's not included in the glyph)
+ i2c_master_write(0);
+ }
+ }
+
+ matrix->dirty = false;
+
+done:
+ i2c_master_stop();
+#if DEBUG_TO_SCREEN
+ --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+ matrix_render(&display);
+}
+
+static void matrix_update(struct CharacterMatrix *dest,
+ const struct CharacterMatrix *source) {
+ if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+ memcpy(dest->display, source->display, sizeof(dest->display));
+ dest->dirty = true;
+ }
+}
+
+static void render_status_info(void) {
+#if DEBUG_TO_SCREEN
+ if (debug_enable) {
+ return;
+ }
+#endif
+
+ struct CharacterMatrix matrix;
+
+ matrix_clear(&matrix);
+ matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+ switch (USB_DeviceState) {
+ case DEVICE_STATE_Unattached:
+ matrix_write_P(&matrix, PSTR("Unattached"));
+ break;
+ case DEVICE_STATE_Suspended:
+ matrix_write_P(&matrix, PSTR("Suspended"));
+ break;
+ case DEVICE_STATE_Configured:
+ matrix_write_P(&matrix, PSTR("Connected"));
+ break;
+ case DEVICE_STATE_Powered:
+ matrix_write_P(&matrix, PSTR("Powered"));
+ break;
+ case DEVICE_STATE_Default:
+ matrix_write_P(&matrix, PSTR("Default"));
+ break;
+ case DEVICE_STATE_Addressed:
+ matrix_write_P(&matrix, PSTR("Addressed"));
+ break;
+ default:
+ matrix_write_P(&matrix, PSTR("Invalid"));
+ }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+ char buf[40];
+ snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+ matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+ switch (layer_state) {
+ case _BASE:
+ matrix_write_P(&matrix, PSTR("Default"));
+ break;
+ case _RAISE:
+ matrix_write_P(&matrix, PSTR("Raise"));
+ break;
+ case _LOWER:
+ matrix_write_P(&matrix, PSTR("Lower"));
+ break;
+ case _ADJUST:
+ matrix_write_P(&matrix, PSTR("ADJUST"));
+ break;
+ default:
+ matrix_write(&matrix, buf);
+ }
+
+ // Host Keyboard LED Status
+ char led[40];
+ snprintf(led, sizeof(led), "\n%s %s %s",
+ (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
+ (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
+ matrix_write(&matrix, led);
+ matrix_update(&display, &matrix);
+}
+
+void iota_gfx_task(void) {
+ render_status_info();
+
+ if (display.dirty) {
+ iota_gfx_flush();
+ }
+
+ if (timer_elapsed(last_flush) > ScreenOffInterval) {
+ iota_gfx_off();
+ }
+}
+#endif
--- /dev/null
+#ifndef SSD1306_H
+#define SSD1306_H
+
+#include <stdbool.h>
+#include <stdio.h>
+
+bool iota_gfx_init(void);
+void iota_gfx_task(void);
+bool iota_gfx_off(void);
+bool iota_gfx_on(void);
+void iota_gfx_flush(void);
+void iota_gfx_write_char(uint8_t c);
+void iota_gfx_write(const char *data);
+void iota_gfx_write_P(const char *data);
+void iota_gfx_clear_screen(void);
+
+#endif
--- /dev/null
+/*
+* light weight WS2812 lib V2.0b
+*
+* Controls WS2811/WS2812/WS2812B RGB-LEDs
+* Author: Tim (cpldcpu@gmail.com)
+*
+* Jan 18th, 2014 v2.0b Initial Version
+* Nov 29th, 2015 v2.3 Added SK6812RGBW support
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ws2812.h"
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "debug.h"
+
+#ifdef RGBW_BB_TWI
+
+// Port for the I2C
+#define I2C_DDR DDRD
+#define I2C_PIN PIND
+#define I2C_PORT PORTD
+
+// Pins to be used in the bit banging
+#define I2C_CLK 0
+#define I2C_DAT 1
+
+#define I2C_DATA_HI()\
+I2C_DDR &= ~ (1 << I2C_DAT);\
+I2C_PORT |= (1 << I2C_DAT);
+#define I2C_DATA_LO()\
+I2C_DDR |= (1 << I2C_DAT);\
+I2C_PORT &= ~ (1 << I2C_DAT);
+
+#define I2C_CLOCK_HI()\
+I2C_DDR &= ~ (1 << I2C_CLK);\
+I2C_PORT |= (1 << I2C_CLK);
+#define I2C_CLOCK_LO()\
+I2C_DDR |= (1 << I2C_CLK);\
+I2C_PORT &= ~ (1 << I2C_CLK);
+
+#define I2C_DELAY 1
+
+void I2C_WriteBit(unsigned char c)
+{
+ if (c > 0)
+ {
+ I2C_DATA_HI();
+ }
+ else
+ {
+ I2C_DATA_LO();
+ }
+
+ I2C_CLOCK_HI();
+ _delay_us(I2C_DELAY);
+
+ I2C_CLOCK_LO();
+ _delay_us(I2C_DELAY);
+
+ if (c > 0)
+ {
+ I2C_DATA_LO();
+ }
+
+ _delay_us(I2C_DELAY);
+}
+
+// Inits bitbanging port, must be called before using the functions below
+//
+void I2C_Init(void)
+{
+ I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+
+ I2C_CLOCK_HI();
+ I2C_DATA_HI();
+
+ _delay_us(I2C_DELAY);
+}
+
+// Send a START Condition
+//
+void I2C_Start(void)
+{
+ // set both to high at the same time
+ I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+ _delay_us(I2C_DELAY);
+
+ I2C_DATA_LO();
+ _delay_us(I2C_DELAY);
+
+ I2C_CLOCK_LO();
+ _delay_us(I2C_DELAY);
+}
+
+// Send a STOP Condition
+//
+void I2C_Stop(void)
+{
+ I2C_CLOCK_HI();
+ _delay_us(I2C_DELAY);
+
+ I2C_DATA_HI();
+ _delay_us(I2C_DELAY);
+}
+
+// write a byte to the I2C slave device
+//
+unsigned char I2C_Write(unsigned char c)
+{
+ for (char i = 0; i < 8; i++)
+ {
+ I2C_WriteBit(c & 128);
+
+ c <<= 1;
+ }
+
+
+ I2C_WriteBit(0);
+ _delay_us(I2C_DELAY);
+ _delay_us(I2C_DELAY);
+
+ // _delay_us(I2C_DELAY);
+ //return I2C_ReadBit();
+ return 0;
+}
+
+
+#endif
+
+// Setleds for standard RGB
+void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
+{
+ // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
+ ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
+}
+
+void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask)
+{
+ // ws2812_DDRREG |= pinmask; // Enable DDR
+ // new universal format (DDR)
+ _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
+
+ ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
+ _delay_us(50);
+}
+
+// Setleds for SK6812RGBW
+void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds)
+{
+
+ #ifdef RGBW_BB_TWI
+ uint8_t sreg_prev, twcr_prev;
+ sreg_prev=SREG;
+ twcr_prev=TWCR;
+ cli();
+ TWCR &= ~(1<<TWEN);
+ I2C_Init();
+ I2C_Start();
+ I2C_Write(0x84);
+ uint16_t datlen = leds<<2;
+ uint8_t curbyte;
+ uint8_t * data = (uint8_t*)ledarray;
+ while (datlen--) {
+ curbyte=*data++;
+ I2C_Write(curbyte);
+ }
+ I2C_Stop();
+ SREG=sreg_prev;
+ TWCR=twcr_prev;
+ #endif
+
+
+ // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
+ // new universal format (DDR)
+ _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
+
+ ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
+
+
+ #ifndef RGBW_BB_TWI
+ _delay_us(80);
+ #endif
+}
+
+void ws2812_sendarray(uint8_t *data,uint16_t datlen)
+{
+ ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
+}
+
+/*
+ This routine writes an array of bytes with RGB values to the Dataout pin
+ using the fast 800kHz clockless WS2811/2812 protocol.
+*/
+
+// Timing in ns
+#define w_zeropulse 350
+#define w_onepulse 900
+#define w_totalperiod 1250
+
+// Fixed cycles used by the inner loop
+#define w_fixedlow 2
+#define w_fixedhigh 4
+#define w_fixedtotal 8
+
+// Insert NOPs to match the timing, if possible
+#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000)
+#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000)
+#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000)
+
+// w1 - nops between rising edge and falling edge - low
+#define w1 (w_zerocycles-w_fixedlow)
+// w2 nops between fe low and fe high
+#define w2 (w_onecycles-w_fixedhigh-w1)
+// w3 nops to complete loop
+#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
+
+#if w1>0
+ #define w1_nops w1
+#else
+ #define w1_nops 0
+#endif
+
+// The only critical timing parameter is the minimum pulse length of the "0"
+// Warn or throw error if this timing can not be met with current F_CPU settings.
+#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
+#if w_lowtime>550
+ #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
+#elif w_lowtime>450
+ #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
+ #warning "Please consider a higher clockspeed, if possible"
+#endif
+
+#if w2>0
+#define w2_nops w2
+#else
+#define w2_nops 0
+#endif
+
+#if w3>0
+#define w3_nops w3
+#else
+#define w3_nops 0
+#endif
+
+#define w_nop1 "nop \n\t"
+#define w_nop2 "rjmp .+0 \n\t"
+#define w_nop4 w_nop2 w_nop2
+#define w_nop8 w_nop4 w_nop4
+#define w_nop16 w_nop8 w_nop8
+
+void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
+{
+ uint8_t curbyte,ctr,masklo;
+ uint8_t sreg_prev;
+
+ // masklo =~maskhi&ws2812_PORTREG;
+ // maskhi |= ws2812_PORTREG;
+ masklo =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
+ maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2);
+ sreg_prev=SREG;
+ cli();
+
+ while (datlen--) {
+ curbyte=(*data++);
+
+ asm volatile(
+ " ldi %0,8 \n\t"
+ "loop%=: \n\t"
+ " out %2,%3 \n\t" // '1' [01] '0' [01] - re
+#if (w1_nops&1)
+w_nop1
+#endif
+#if (w1_nops&2)
+w_nop2
+#endif
+#if (w1_nops&4)
+w_nop4
+#endif
+#if (w1_nops&8)
+w_nop8
+#endif
+#if (w1_nops&16)
+w_nop16
+#endif
+ " sbrs %1,7 \n\t" // '1' [03] '0' [02]
+ " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low
+ " lsl %1 \n\t" // '1' [04] '0' [04]
+#if (w2_nops&1)
+ w_nop1
+#endif
+#if (w2_nops&2)
+ w_nop2
+#endif
+#if (w2_nops&4)
+ w_nop4
+#endif
+#if (w2_nops&8)
+ w_nop8
+#endif
+#if (w2_nops&16)
+ w_nop16
+#endif
+ " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high
+#if (w3_nops&1)
+w_nop1
+#endif
+#if (w3_nops&2)
+w_nop2
+#endif
+#if (w3_nops&4)
+w_nop4
+#endif
+#if (w3_nops&8)
+w_nop8
+#endif
+#if (w3_nops&16)
+w_nop16
+#endif
+
+ " dec %0 \n\t" // '1' [+2] '0' [+2]
+ " brne loop%=\n\t" // '1' [+3] '0' [+4]
+ : "=&d" (ctr)
+ : "r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
+ );
+ }
+
+ SREG=sreg_prev;
+}
--- /dev/null
+/*
+ * light weight WS2812 lib include
+ *
+ * Version 2.3 - Nev 29th 2015
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Please do not change this file! All configuration is handled in "ws2812_config.h"
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef LIGHT_WS2812_H_
+#define LIGHT_WS2812_H_
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+//#include "ws2812_config.h"
+//#include "i2cmaster.h"
+
+#ifdef RGBW
+ #define LED_TYPE struct cRGBW
+#else
+ #define LED_TYPE struct cRGB
+#endif
+
+
+/*
+ * Structure of the LED array
+ *
+ * cRGB: RGB for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
+ * cRGBW: RGBW for SK6812RGBW
+ */
+
+struct cRGB { uint8_t g; uint8_t r; uint8_t b; };
+struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
+
+
+
+/* User Interface
+ *
+ * Input:
+ * ledarray: An array of GRB data describing the LED colors
+ * number_of_leds: The number of LEDs to write
+ * pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
+ *
+ * The functions will perform the following actions:
+ * - Set the data-out pin as output
+ * - Send out the LED data
+ * - Wait 50�s to reset the LEDs
+ */
+
+void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
+
+/*
+ * Old interface / Internal functions
+ *
+ * The functions take a byte-array and send to the data output as WS2812 bitstream.
+ * The length is the number of bytes to send - three per LED.
+ */
+
+void ws2812_sendarray (uint8_t *array,uint16_t length);
+void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
+
+
+/*
+ * Internal defines
+ */
+#ifndef CONCAT
+#define CONCAT(a, b) a ## b
+#endif
+#ifndef CONCAT_EXP
+#define CONCAT_EXP(a, b) CONCAT(a, b)
+#endif
+
+// #define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port)
+// #define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port)
+
+#endif /* LIGHT_WS2812_H_ */
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+ 400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+ 0xFF, 0x00, /* C1-1 -> C1-16 */
+ 0xFF, 0x00, /* C2-1 -> C2-16 */
+ 0xFF, 0x00, /* C3-1 -> C3-16 */
+ 0xFF, 0x00, /* C4-1 -> C4-16 */
+ 0x3F, 0x00, /* C5-1 -> C5-16 */
+ 0x00, 0x00, /* C6-1 -> C6-16 */
+ 0x00, 0x00, /* C7-1 -> C7-16 */
+ 0x00, 0x00, /* C8-1 -> C8-16 */
+ 0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+// 45 44 43 42 41 40 39
+ { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+// 52 51 50 49 48 47 46
+ { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+// 58 57 56 55 54 53 N/A
+ { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+// 67 66 65 64 63 62 61
+ { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+// 76 75 74 73 72 60 59
+ { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+// N/A N/A N/A N/A N/A N/A 68
+ { NA, NA, NA, NA, NA, NA, LA(5, 4) },
+// N/A N/A N/A N/A 71 70 69
+ { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ /* I2C pins */
+ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+ palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palClearPad(GPIOB, 16);
+ /* start I2C */
+ i2cStart(&I2CD1, &i2ccfg);
+ // try high drive (from kiibohd)
+ I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+ // try glitch fixing (from kiibohd)
+ I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+ (void) g;
+ return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+ (void) g;
+ return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+ (void) g;
+ if(!shutdown) {
+ palSetPad(GPIOB, 16);
+ }
+ else {
+ palClearPad(GPIOB, 16);
+ }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
--- /dev/null
+GFXINC += drivers/ugfx/gdisp/is31fl3731c
+GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK
\ No newline at end of file
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK
+#define GDISP_SCREEN_HEIGHT LED_HEIGHT
+#define GDISP_SCREEN_WIDTH LED_WIDTH
+
+#include "gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_is31fl3731c.h"
+
+
+// Can't include led_tables from here
+extern const uint8_t CIE1931_CURVE[];
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#ifndef GDISP_INITIAL_CONTRAST
+ #define GDISP_INITIAL_CONTRAST 0
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+ #define GDISP_INITIAL_BACKLIGHT 0
+#endif
+
+#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
+
+#define IS31_ADDR_DEFAULT 0x74
+
+#define IS31_REG_CONFIG 0x00
+// bits in reg
+#define IS31_REG_CONFIG_PICTUREMODE 0x00
+#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+// D2:D0 bits are starting frame for autoplay mode
+
+#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+
+#define IS31_REG_AUTOPLAYCTRL1 0x02
+// D6:D4 number of loops (000=infty)
+// D2:D0 number of frames to be used
+
+#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+
+#define IS31_REG_DISPLAYOPT 0x05
+#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
+#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+// D2:D0 bits blink period time (*0.27s)
+
+#define IS31_REG_AUDIOSYNC 0x06
+#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+
+#define IS31_REG_FRAMESTATE 0x07
+
+#define IS31_REG_BREATHCTRL1 0x08
+// D6:D4 fade out time (26ms*2^i)
+// D2:D0 fade in time (26ms*2^i)
+
+#define IS31_REG_BREATHCTRL2 0x09
+#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+// D2:D0 extinguish time (3.5ms*2^i)
+
+#define IS31_REG_SHUTDOWN 0x0A
+#define IS31_REG_SHUTDOWN_OFF 0x0
+#define IS31_REG_SHUTDOWN_ON 0x1
+
+#define IS31_REG_AGCCTRL 0x0B
+#define IS31_REG_ADCRATE 0x0C
+
+#define IS31_COMMANDREGISTER 0xFD
+#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define IS31_FUNCTIONREG_SIZE 0xD
+
+#define IS31_FRAME_SIZE 0xB4
+
+#define IS31_PWM_REG 0x24
+#define IS31_PWM_SIZE 0x90
+
+#define IS31_LED_MASK_SIZE 0x12
+
+#define IS31
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+typedef struct{
+ uint8_t write_buffer_offset;
+ uint8_t write_buffer[IS31_FRAME_SIZE];
+ uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
+ uint8_t page;
+}__attribute__((__packed__)) PrivData;
+
+// Some common routines and macros
+#define PRIV(g) ((PrivData*)g->priv)
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+ uint8_t tx[2] __attribute__((aligned(2)));
+ tx[0] = IS31_COMMANDREGISTER;
+ tx[1] = page;
+ write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+ uint8_t tx[2] __attribute__((aligned(2)));
+ tx[0] = reg;
+ tx[1] = data;
+ write_page(g, page);
+ write_data(g, tx, 2);
+}
+
+static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
+ PRIV(g)->write_buffer_offset = offset;
+ write_page(g, page);
+ write_data(g, (uint8_t*)PRIV(g), length + 1);
+}
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+ // The private area is the display surface.
+ g->priv = gfxAlloc(sizeof(PrivData));
+ __builtin_memset(PRIV(g), 0, sizeof(PrivData));
+ PRIV(g)->page = 0;
+
+ // Initialise the board interface
+ init_board(g);
+ gfxSleepMilliseconds(10);
+
+ // zero function page, all registers (assuming full_page is all zeroes)
+ write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+ set_hardware_shutdown(g, false);
+ gfxSleepMilliseconds(10);
+ // software shutdown
+ write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+ gfxSleepMilliseconds(10);
+ // zero function page, all registers
+ write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
+ gfxSleepMilliseconds(10);
+
+
+ // zero all LED registers on all 8 pages, and enable the mask
+ __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
+ for(uint8_t i=0; i<8; i++) {
+ write_ram(g, i, 0, IS31_FRAME_SIZE);
+ gfxSleepMilliseconds(1);
+ }
+
+ // software shutdown disable (i.e. turn stuff on)
+ write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+ gfxSleepMilliseconds(10);
+
+ // Finish Init
+ post_init_board(g);
+
+ /* Initialise the GDISP structure */
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Orientation = GDISP_ROTATE_0;
+ g->g.Powermode = powerOff;
+ g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+ g->g.Contrast = GDISP_INITIAL_CONTRAST;
+ return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+ // Don't flush if we don't need it.
+ if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+ return;
+
+ PRIV(g)->page++;
+ PRIV(g)->page %= 2;
+ // TODO: some smarter algorithm for this
+ // We should run only one physical page at a time
+ // This way we don't need to send so much data, and
+ // we could use slightly less memory
+ uint8_t* src = PRIV(g)->frame_buffer;
+ for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+ for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+ uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
+ PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
+ ++src;
+ }
+ }
+ write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+ gfxSleepMilliseconds(1);
+ write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
+
+ g->flags &= ~GDISP_FLG_NEEDFLUSH;
+ }
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+ coord_t x, y;
+
+ switch(g->g.Orientation) {
+ default:
+ case GDISP_ROTATE_0:
+ x = g->p.x;
+ y = g->p.y;
+ break;
+ case GDISP_ROTATE_180:
+ x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+ y = g->p.y;
+ break;
+ }
+ PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+ g->flags |= GDISP_FLG_NEEDFLUSH;
+ }
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+ LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+ coord_t x, y;
+
+ switch(g->g.Orientation) {
+ default:
+ case GDISP_ROTATE_0:
+ x = g->p.x;
+ y = g->p.y;
+ break;
+ case GDISP_ROTATE_180:
+ x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+ y = g->p.y;
+ break;
+ }
+ return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+ }
+#endif
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+ LLDSPEC void gdisp_lld_control(GDisplay *g) {
+ switch(g->p.x) {
+ case GDISP_CONTROL_POWER:
+ if (g->g.Powermode == (powermode_t)g->p.ptr)
+ return;
+ switch((powermode_t)g->p.ptr) {
+ case powerOff:
+ case powerSleep:
+ case powerDeepSleep:
+ write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+ break;
+ case powerOn:
+ write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+ break;
+ default:
+ return;
+ }
+ g->g.Powermode = (powermode_t)g->p.ptr;
+ return;
+
+ case GDISP_CONTROL_ORIENTATION:
+ if (g->g.Orientation == (orientation_t)g->p.ptr)
+ return;
+ switch((orientation_t)g->p.ptr) {
+ /* Rotation is handled by the drawing routines */
+ case GDISP_ROTATE_0:
+ case GDISP_ROTATE_180:
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_90:
+ case GDISP_ROTATE_270:
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ default:
+ return;
+ }
+ g->g.Orientation = (orientation_t)g->p.ptr;
+ return;
+
+ case GDISP_CONTROL_BACKLIGHT:
+ if (g->g.Backlight == (unsigned)g->p.ptr)
+ return;
+ unsigned val = (unsigned)g->p.ptr;
+ g->g.Backlight = val > 100 ? 100 : val;
+ g->flags |= GDISP_FLG_NEEDFLUSH;
+ return;
+ }
+ }
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support. */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL TRUE
+#define GDISP_HARDWARE_PIXELREAD TRUE
+#define GDISP_HARDWARE_CONTROL TRUE
+
+#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256
+
+#endif /* GFX_USE_GDISP */
+
+#endif /* _GDISP_LLD_CONFIG_H */
--- /dev/null
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER 0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+ ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+ palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+ // Operation complete callback or @p NULL.
+ .end_cb = NULL,
+ //The chip select line port - when not using pcs.
+ .ssport = ST7565_GPIOPORT,
+ // brief The chip select line pad number - when not using pcs.
+ .sspad=ST7565_SS_PIN,
+ // SPI initialization data.
+ .tar0 =
+ SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+ | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+ | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+ | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+ | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+ | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+};
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to acquire
+ // spiAcquireBus(&SPID1);
+ spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to release
+ //spiReleaseBus(&SPID1);
+ spiUnselect(&SPID1);
+}
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+ palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+ palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+ palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+
+ spiInit();
+ spiStart(&SPID1, &spi1config);
+ release_bus(g);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+ (void) g;
+ if (state) {
+ palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ }
+ else {
+ palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ }
+}
+
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+ palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
--- /dev/null
+GFXINC += drivers/ugfx/gdisp/st7565
+GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK
\ No newline at end of file
--- /dev/null
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
+
+#include "gfx.h"
+
+#if GFX_USE_GDISP
+
+#define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK
+#include "gdisp_lld_config.h"
+#include "src/gdisp/gdisp_driver.h"
+
+#include "board_st7565.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+#ifndef GDISP_SCREEN_HEIGHT
+#define GDISP_SCREEN_HEIGHT LCD_HEIGHT
+#endif
+#ifndef GDISP_SCREEN_WIDTH
+#define GDISP_SCREEN_WIDTH LCD_WIDTH
+#endif
+#ifndef GDISP_INITIAL_CONTRAST
+#define GDISP_INITIAL_CONTRAST 35
+#endif
+#ifndef GDISP_INITIAL_BACKLIGHT
+#define GDISP_INITIAL_BACKLIGHT 100
+#endif
+
+#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
+
+#include "st7565.h"
+
+/*===========================================================================*/
+/* Driver config defaults for backward compatibility. */
+/*===========================================================================*/
+#ifndef ST7565_LCD_BIAS
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
+#endif
+#ifndef ST7565_ADC
+#define ST7565_ADC ST7565_ADC_NORMAL
+#endif
+#ifndef ST7565_COM_SCAN
+#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
+#endif
+#ifndef ST7565_PAGE_ORDER
+#define ST7565_PAGE_ORDER 0,1,2,3
+#endif
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+typedef struct{
+ bool_t buffer2;
+ uint8_t data_pos;
+ uint8_t data[16];
+ uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
+}PrivData;
+
+// Some common routines and macros
+#define PRIV(g) ((PrivData*)g->priv)
+#define RAM(g) (PRIV(g)->ram)
+
+static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
+ PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
+}
+
+static GFXINLINE void flush_cmd(GDisplay* g) {
+ write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
+ PRIV(g)->data_pos = 0;
+}
+
+#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+
+// Some common routines and macros
+#define delay(us) gfxSleepMicroseconds(us)
+#define delay_ms(ms) gfxSleepMilliseconds(ms)
+
+#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xybit(y) (1<<((y)&7))
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/*
+ * As this controller can't update on a pixel boundary we need to maintain the
+ * the entire display surface in memory so that we can do the necessary bit
+ * operations. Fortunately it is a small display in monochrome.
+ * 64 * 128 / 8 = 1024 bytes.
+ */
+
+LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
+ // The private area is the display surface.
+ g->priv = gfxAlloc(sizeof(PrivData));
+ PRIV(g)->buffer2 = false;
+ PRIV(g)->data_pos = 0;
+
+ // Initialise the board interface
+ init_board(g);
+
+ // Hardware reset
+ setpin_reset(g, TRUE);
+ gfxSleepMilliseconds(20);
+ setpin_reset(g, FALSE);
+ gfxSleepMilliseconds(20);
+ acquire_bus(g);
+ enter_cmd_mode(g);
+
+ write_cmd(g, ST7565_RESET);
+ write_cmd(g, ST7565_LCD_BIAS);
+ write_cmd(g, ST7565_ADC);
+ write_cmd(g, ST7565_COM_SCAN);
+
+ write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
+ write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
+
+ // turn on internal power supply (VC=1, VR=1, VF=1)
+ write_cmd(g, ST7565_POWER_CONTROL | 0x07);
+
+ write_cmd(g, ST7565_INVERT_DISPLAY);
+ write_cmd(g, ST7565_ALLON_NORMAL);
+
+ write_cmd(g, ST7565_START_LINE | 0);
+ write_cmd(g, ST7565_RMW);
+ flush_cmd(g);
+
+ // Finish Init
+ post_init_board(g);
+
+ // Release the bus
+ release_bus(g);
+
+ /* Initialise the GDISP structure */
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Orientation = GDISP_ROTATE_0;
+ g->g.Powermode = powerOff;
+ g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+ g->g.Contrast = GDISP_INITIAL_CONTRAST;
+ return TRUE;
+}
+
+#if GDISP_HARDWARE_FLUSH
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+ unsigned p;
+
+ // Don't flush if we don't need it.
+ if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+ return;
+
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
+ for (p = 0; p < 4; p++) {
+ write_cmd(g, ST7565_PAGE | (p + dstOffset));
+ write_cmd(g, ST7565_COLUMN_MSB | 0);
+ write_cmd(g, ST7565_COLUMN_LSB | 0);
+ write_cmd(g, ST7565_RMW);
+ flush_cmd(g);
+ enter_data_mode(g);
+ write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+ enter_cmd_mode(g);
+ }
+ unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
+ write_cmd(g, ST7565_START_LINE | line);
+ flush_cmd(g);
+ PRIV(g)->buffer2 = !PRIV(g)->buffer2;
+ release_bus(g);
+
+ g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
+#endif
+
+#if GDISP_HARDWARE_DRAWPIXEL
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+ coord_t x, y;
+
+ switch(g->g.Orientation) {
+ default:
+ case GDISP_ROTATE_0:
+ x = g->p.x;
+ y = g->p.y;
+ break;
+ case GDISP_ROTATE_90:
+ x = g->p.y;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+ break;
+ case GDISP_ROTATE_180:
+ x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ break;
+ case GDISP_ROTATE_270:
+ x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ y = g->p.x;
+ break;
+ }
+ if (gdispColor2Native(g->p.color) != Black)
+ RAM(g)[xyaddr(x, y)] |= xybit(y);
+ else
+ RAM(g)[xyaddr(x, y)] &= ~xybit(y);
+ g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+#endif
+
+#if GDISP_HARDWARE_PIXELREAD
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+ coord_t x, y;
+
+ switch(g->g.Orientation) {
+ default:
+ case GDISP_ROTATE_0:
+ x = g->p.x;
+ y = g->p.y;
+ break;
+ case GDISP_ROTATE_90:
+ x = g->p.y;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
+ break;
+ case GDISP_ROTATE_180:
+ x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+ y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ break;
+ case GDISP_ROTATE_270:
+ x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
+ y = g->p.x;
+ break;
+ }
+ return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
+}
+#endif
+
+LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
+ uint8_t* buffer = (uint8_t*)g->p.ptr;
+ int linelength = g->p.cx;
+ for (int i = 0; i < g->p.cy; i++) {
+ unsigned dstx = g->p.x;
+ unsigned dsty = g->p.y + i;
+ unsigned srcx = g->p.x1;
+ unsigned srcy = g->p.y1 + i;
+ unsigned srcbit = srcy * g->p.x2 + srcx;
+ for(int j=0; j < linelength; j++) {
+ uint8_t src = buffer[srcbit / 8];
+ uint8_t bit = 7-(srcbit % 8);
+ uint8_t bitset = (src >> bit) & 1;
+ uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+ if (bitset) {
+ *dst |= xybit(dsty);
+ }
+ else {
+ *dst &= ~xybit(dsty);
+ }
+ dstx++;
+ srcbit++;
+ }
+ }
+ g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+
+#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+ switch(g->p.x) {
+ case GDISP_CONTROL_POWER:
+ if (g->g.Powermode == (powermode_t)g->p.ptr)
+ return;
+ switch((powermode_t)g->p.ptr) {
+ case powerOff:
+ case powerSleep:
+ case powerDeepSleep:
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ write_cmd(g, ST7565_DISPLAY_OFF);
+ flush_cmd(g);
+ release_bus(g);
+ break;
+ case powerOn:
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ write_cmd(g, ST7565_DISPLAY_ON);
+ flush_cmd(g);
+ release_bus(g);
+ break;
+ default:
+ return;
+ }
+ g->g.Powermode = (powermode_t)g->p.ptr;
+ return;
+
+ case GDISP_CONTROL_ORIENTATION:
+ if (g->g.Orientation == (orientation_t)g->p.ptr)
+ return;
+ switch((orientation_t)g->p.ptr) {
+ /* Rotation is handled by the drawing routines */
+ case GDISP_ROTATE_0:
+ case GDISP_ROTATE_180:
+ g->g.Height = GDISP_SCREEN_HEIGHT;
+ g->g.Width = GDISP_SCREEN_WIDTH;
+ break;
+ case GDISP_ROTATE_90:
+ case GDISP_ROTATE_270:
+ g->g.Height = GDISP_SCREEN_WIDTH;
+ g->g.Width = GDISP_SCREEN_HEIGHT;
+ break;
+ default:
+ return;
+ }
+ g->g.Orientation = (orientation_t)g->p.ptr;
+ return;
+
+ case GDISP_CONTROL_CONTRAST:
+ g->g.Contrast = (unsigned)g->p.ptr & 63;
+ acquire_bus(g);
+ enter_cmd_mode(g);
+ write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+ flush_cmd(g);
+ release_bus(g);
+ return;
+ }
+}
+#endif // GDISP_NEED_CONTROL
+
+#endif // GFX_USE_GDISP
--- /dev/null
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_CONFIG_H
+#define _GDISP_LLD_CONFIG_H
+
+#if GFX_USE_GDISP
+
+/*===========================================================================*/
+/* Driver hardware support. */
+/*===========================================================================*/
+
+#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
+#define GDISP_HARDWARE_DRAWPIXEL TRUE
+#define GDISP_HARDWARE_PIXELREAD TRUE
+#define GDISP_HARDWARE_CONTROL TRUE
+#define GDISP_HARDWARE_BITFILLS TRUE
+
+#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
+
+#endif /* GFX_USE_GDISP */
+
+#endif /* _GDISP_LLD_CONFIG_H */
--- /dev/null
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
+
+#ifndef _ST7565_H
+#define _ST7565_H
+
+#define ST7565_CONTRAST 0x81
+#define ST7565_ALLON_NORMAL 0xA4
+#define ST7565_ALLON 0xA5
+#define ST7565_POSITIVE_DISPLAY 0xA6
+#define ST7565_INVERT_DISPLAY 0xA7
+#define ST7565_DISPLAY_OFF 0xAE
+#define ST7565_DISPLAY_ON 0xAF
+
+#define ST7565_LCD_BIAS_7 0xA3
+#define ST7565_LCD_BIAS_9 0xA2
+
+#define ST7565_ADC_NORMAL 0xA0
+#define ST7565_ADC_REVERSE 0xA1
+
+#define ST7565_COM_SCAN_INC 0xC0
+#define ST7565_COM_SCAN_DEC 0xC8
+
+#define ST7565_START_LINE 0x40
+#define ST7565_PAGE 0xB0
+#define ST7565_COLUMN_MSB 0x10
+#define ST7565_COLUMN_LSB 0x00
+#define ST7565_RMW 0xE0
+
+#define ST7565_RESISTOR_RATIO 0x20
+#define ST7565_POWER_CONTROL 0x28
+
+#define ST7565_RESET 0xE2
+
+#endif /* _ST7565_H */
+++ /dev/null
-/*
- pins_arduino.h - Pin definition functions for Arduino
- Part of Arduino - http://www.arduino.cc/
-
- Copyright (c) 2007 David A. Mellis
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General
- Public License along with this library; if not, write to the
- Free Software Foundation, Inc., 59 Temple Place, Suite 330,
- Boston, MA 02111-1307 USA
-
- $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS 30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0 PORTD |= (1<<5)
-#define TXLED1 PORTD &= ~(1<<5)
-#define RXLED0 PORTB |= (1<<0)
-#define RXLED1 PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24; // D4
-static const uint8_t ADC7 = 25; // D6
-static const uint8_t ADC8 = 26; // D8
-static const uint8_t ADC9 = 27; // D9
-static const uint8_t ADC10 = 28; // D10
-static const uint8_t ADC11 = 29; // D12
-
-#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-// __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM). Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0 PD2 RXD1/INT2
-// D1 PD3 TXD1/INT3
-// D2 PD1 SDA SDA/INT1
-// D3# PD0 PWM8/SCL OC0B/SCL/INT0
-// D4 A6 PD4 ADC8
-// D5# PC6 ??? OC3A/#OC4A
-// D6# A7 PD7 FastPWM #OC4D/ADC10
-// D7 PE6 INT6/AIN0
-//
-// D8 A8 PB4 ADC11/PCINT4
-// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5
-// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6
-// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7
-// D12 A11 PD6 T1/#OC4D/ADC9
-// D13# PC7 PWM10 CLK0/OC4A
-//
-// A0 D18 PF7 ADC7
-// A1 D19 PF6 ADC6
-// A2 D20 PF5 ADC5
-// A3 D21 PF4 ADC4
-// A4 D22 PF1 ADC1
-// A5 D23 PF0 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO D14 PB3 MISO,PCINT3
-// SCK D15 PB1 SCK,PCINT1
-// MOSI D16 PB2 MOSI,PCINT2
-// SS D17 PB0 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED D24 PD5 XCK1
-// RXLED D17 PB0
-// HWB PE2 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &DDRB,
- (uint16_t) &DDRC,
- (uint16_t) &DDRD,
- (uint16_t) &DDRE,
- (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PORTB,
- (uint16_t) &PORTC,
- (uint16_t) &PORTD,
- (uint16_t) &PORTE,
- (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PINB,
- (uint16_t) &PINC,
- (uint16_t) &PIND,
- (uint16_t) &PINE,
- (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
- PD, // D0 - PD2
- PD, // D1 - PD3
- PD, // D2 - PD1
- PD, // D3 - PD0
- PD, // D4 - PD4
- PC, // D5 - PC6
- PD, // D6 - PD7
- PE, // D7 - PE6
-
- PB, // D8 - PB4
- PB, // D9 - PB5
- PB, // D10 - PB6
- PB, // D11 - PB7
- PD, // D12 - PD6
- PC, // D13 - PC7
-
- PB, // D14 - MISO - PB3
- PB, // D15 - SCK - PB1
- PB, // D16 - MOSI - PB2
- PB, // D17 - SS - PB0
-
- PF, // D18 - A0 - PF7
- PF, // D19 - A1 - PF6
- PF, // D20 - A2 - PF5
- PF, // D21 - A3 - PF4
- PF, // D22 - A4 - PF1
- PF, // D23 - A5 - PF0
-
- PD, // D24 - PD5
- PD, // D25 / D6 - A7 - PD7
- PB, // D26 / D8 - A8 - PB4
- PB, // D27 / D9 - A9 - PB5
- PB, // D28 / D10 - A10 - PB6
- PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
- _BV(2), // D0 - PD2
- _BV(3), // D1 - PD3
- _BV(1), // D2 - PD1
- _BV(0), // D3 - PD0
- _BV(4), // D4 - PD4
- _BV(6), // D5 - PC6
- _BV(7), // D6 - PD7
- _BV(6), // D7 - PE6
-
- _BV(4), // D8 - PB4
- _BV(5), // D9 - PB5
- _BV(6), // D10 - PB6
- _BV(7), // D11 - PB7
- _BV(6), // D12 - PD6
- _BV(7), // D13 - PC7
-
- _BV(3), // D14 - MISO - PB3
- _BV(1), // D15 - SCK - PB1
- _BV(2), // D16 - MOSI - PB2
- _BV(0), // D17 - SS - PB0
-
- _BV(7), // D18 - A0 - PF7
- _BV(6), // D19 - A1 - PF6
- _BV(5), // D20 - A2 - PF5
- _BV(4), // D21 - A3 - PF4
- _BV(1), // D22 - A4 - PF1
- _BV(0), // D23 - A5 - PF0
-
- _BV(5), // D24 - PD5
- _BV(7), // D25 / D6 - A7 - PD7
- _BV(4), // D26 / D8 - A8 - PB4
- _BV(5), // D27 / D9 - A9 - PB5
- _BV(6), // D28 / D10 - A10 - PB6
- _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- TIMER0B, /* 3 */
- NOT_ON_TIMER,
- TIMER3A, /* 5 */
- TIMER4D, /* 6 */
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- TIMER1A, /* 9 */
- TIMER1B, /* 10 */
- TIMER0A, /* 11 */
-
- NOT_ON_TIMER,
- TIMER4A, /* 13 */
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
- 7, // A0 PF7 ADC7
- 6, // A1 PF6 ADC6
- 5, // A2 PF5 ADC5
- 4, // A3 PF4 ADC4
- 1, // A4 PF1 ADC1
- 0, // A5 PF0 ADC0
- 8, // A6 D4 PD4 ADC8
- 10, // A7 D6 PD7 ADC10
- 11, // A8 D8 PB4 ADC11
- 12, // A9 D9 PB5 ADC12
- 13, // A10 D10 PB6 ADC13
- 9 // A11 D12 PD6 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
-// pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR Serial
-#define SERIAL_PORT_USBVIRTUAL Serial
-#define SERIAL_PORT_HARDWARE Serial1
-#define SERIAL_PORT_HARDWARE_OPEN Serial1
-
-#endif /* Pins_Arduino_h */
+++ /dev/null
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-#ifdef LCD_ENABLE
-#include "lcd_keyframes.h"
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
-#include "lcd_backlight_keyframes.h"
-#endif
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef LCD_ENABLE
- lcd_keyframe_enable(animation, state);
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
- backlight_keyframe_enable(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
- led_keyframe_enable(animation, state);
-#endif
- return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef LCD_ENABLE
- lcd_keyframe_disable(animation, state);
-#endif
-#ifdef LCD_BACKLIGHT_ENABLE
- backlight_keyframe_disable(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
- led_keyframe_disable(animation, state);
-#endif
- return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
- bool ret = false;
-#ifdef LCD_BACKLIGHT_ENABLE
- ret |= backlight_keyframe_animate_color(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
- ret |= led_keyframe_fade_in_all(animation, state);
-#endif
- return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
- bool ret = false;
-#ifdef LCD_BACKLIGHT_ENABLE
- ret |= backlight_keyframe_animate_color(animation, state);
-#endif
-#ifdef BACKLIGHT_ENABLE
- ret |= led_keyframe_fade_out_all(animation, state);
-#endif
- return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
- .num_frames = 3,
- .loop = false,
- .frame_lengths = {0, 0, gfxMillisecondsToTicks(5000)},
- .frame_functions = {
- keyframe_enable,
- lcd_keyframe_draw_logo,
- keyframe_fade_in,
- },
-};
-
-keyframe_animation_t default_suspend_animation = {
- .num_frames = 3,
- .loop = false,
- .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0},
- .frame_functions = {
- lcd_keyframe_display_layer_text,
- keyframe_fade_out,
- keyframe_disable,
- },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
- .num_frames = 14,
- .loop = true,
- .frame_lengths = {
- gfxMillisecondsToTicks(1000), // fade in
- gfxMillisecondsToTicks(1000), // no op (leds on)
- gfxMillisecondsToTicks(1000), // fade out
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
- 0, // mirror leds
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
- 0, // normal leds
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
- },
- .frame_functions = {
- led_keyframe_fade_in_all,
- keyframe_no_operation,
- led_keyframe_fade_out_all,
- led_keyframe_crossfade,
- led_keyframe_left_to_right_gradient,
- led_keyframe_crossfade,
- led_keyframe_top_to_bottom_gradient,
- led_keyframe_mirror_orientation,
- led_keyframe_crossfade,
- led_keyframe_left_to_right_gradient,
- led_keyframe_crossfade,
- led_keyframe_top_to_bottom_gradient,
- led_keyframe_normal_orientation,
- led_keyframe_crossfade,
- },
-};
-#endif
-
-#endif
+++ /dev/null
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-
-#include "visualizer.h"
-
-// You can use these default animations, but of course you can also write your own custom ones instead
-extern keyframe_animation_t default_startup_animation;
-extern keyframe_animation_t default_suspend_animation;
-
-// An animation for testing and demonstrating the led support, should probably not be used for real world
-// cases
-extern keyframe_animation_t led_test_animation;
-
-#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+ 400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+ 0xFF, 0x00, /* C1-1 -> C1-16 */
+ 0xFF, 0x00, /* C2-1 -> C2-16 */
+ 0xFF, 0x00, /* C3-1 -> C3-16 */
+ 0xFF, 0x00, /* C4-1 -> C4-16 */
+ 0x3F, 0x00, /* C5-1 -> C5-16 */
+ 0x00, 0x00, /* C6-1 -> C6-16 */
+ 0x00, 0x00, /* C7-1 -> C7-16 */
+ 0x00, 0x00, /* C8-1 -> C8-16 */
+ 0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+// 45 44 43 42 41 40 39
+ { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+// 52 51 50 49 48 47 46
+ { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+// 58 57 56 55 54 53 N/A
+ { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+// 67 66 65 64 63 62 61
+ { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+// 76 75 74 73 72 60 59
+ { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+// N/A N/A N/A N/A N/A N/A 68
+ { NA, NA, NA, NA, NA, NA, LA(5, 4) },
+// N/A N/A N/A N/A 71 70 69
+ { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ /* I2C pins */
+ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+ palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palClearPad(GPIOB, 16);
+ /* start I2C */
+ i2cStart(&I2CD1, &i2ccfg);
+ // try high drive (from kiibohd)
+ I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+ // try glitch fixing (from kiibohd)
+ I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+ (void) g;
+ return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+ (void) g;
+ return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+ (void) g;
+ if(!shutdown) {
+ palSetPad(GPIOB, 16);
+ }
+ else {
+ palClearPad(GPIOB, 16);
+ }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
--- /dev/null
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ * http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER 0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+ ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+ palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+ // Operation complete callback or @p NULL.
+ .end_cb = NULL,
+ //The chip select line port - when not using pcs.
+ .ssport = ST7565_GPIOPORT,
+ // brief The chip select line pad number - when not using pcs.
+ .sspad=ST7565_SS_PIN,
+ // SPI initialization data.
+ .tar0 =
+ SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+ | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+ | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+ | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+ | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+ | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+};
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to acquire
+ // spiAcquireBus(&SPID1);
+ spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+ (void) g;
+ // Only the LCD is using the SPI bus, so no need to release
+ //spiReleaseBus(&SPID1);
+ spiUnselect(&SPID1);
+}
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+ palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+ palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+ palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+
+ spiInit();
+ spiStart(&SPID1, &spi1config);
+ release_bus(g);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+ (void) g;
+ if (state) {
+ palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ }
+ else {
+ palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+ }
+}
+
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+ palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+ palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
#define SERIAL_LINK_BAUD 562500
#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
-// The visualizer needs gfx thread priorities
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
#define VISUALIZER_USER_DATA_SIZE 16
-#define LCD_DISPLAY_NUMBER 0
-#define LED_DISPLAY_NUMBER 1
-
-#define LED_NUM_ROWS 7
-#define LED_NUM_COLS 7
/*
* Feature disable options
* These options are also useful to firmware size reduction.
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
- 400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-#define GDISP_SCREEN_WIDTH 7
-#define GDISP_SCREEN_HEIGHT 7
-
-static const uint8_t led_mask[] = {
- 0xFF, 0x00, /* C1-1 -> C1-16 */
- 0xFF, 0x00, /* C2-1 -> C2-16 */
- 0xFF, 0x00, /* C3-1 -> C3-16 */
- 0xFF, 0x00, /* C4-1 -> C4-16 */
- 0x3F, 0x00, /* C5-1 -> C5-16 */
- 0x00, 0x00, /* C6-1 -> C6-16 */
- 0x00, 0x00, /* C7-1 -> C7-16 */
- 0x00, 0x00, /* C8-1 -> C8-16 */
- 0x00, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-// 45 44 43 42 41 40 39
- { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-// 52 51 50 49 48 47 46
- { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-// 58 57 56 55 54 53 N/A
- { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-// 67 66 65 64 63 62 61
- { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-// 76 75 74 73 72 60 59
- { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-// N/A N/A N/A N/A N/A N/A 68
- { NA, NA, NA, NA, NA, NA, LA(5, 4) },
-// N/A N/A N/A N/A 71 70 69
- { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) },
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- /* I2C pins */
- palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
- palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
- palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
- palClearPad(GPIOB, 16);
- /* start I2C */
- i2cStart(&I2CD1, &i2ccfg);
- // try high drive (from kiibohd)
- I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
- // try glitch fixing (from kiibohd)
- I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
- (void) g;
- return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
- (void) g;
- return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
- (void) g;
- if(!shutdown) {
- palSetPad(GPIOB, 16);
- }
- else {
- palClearPad(GPIOB, 16);
- }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
+++ /dev/null
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
- #define GDISP_SCREEN_HEIGHT 9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
- #define GDISP_SCREEN_WIDTH 16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
- #define GDISP_INITIAL_CONTRAST 0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
- #define GDISP_INITIAL_BACKLIGHT 0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG 0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-typedef struct{
- uint8_t write_buffer_offset;
- uint8_t write_buffer[IS31_FRAME_SIZE];
- uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
- uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g) ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
- uint8_t tx[2] __attribute__((aligned(2)));
- tx[0] = IS31_COMMANDREGISTER;
- tx[1] = page;
- write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
- uint8_t tx[2] __attribute__((aligned(2)));
- tx[0] = reg;
- tx[1] = data;
- write_page(g, page);
- write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
- PRIV(g)->write_buffer_offset = offset;
- write_page(g, page);
- write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(sizeof(PrivData));
- __builtin_memset(PRIV(g), 0, sizeof(PrivData));
- PRIV(g)->page = 0;
-
- // Initialise the board interface
- init_board(g);
- gfxSleepMilliseconds(10);
-
- // zero function page, all registers (assuming full_page is all zeroes)
- write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
- set_hardware_shutdown(g, false);
- gfxSleepMilliseconds(10);
- // software shutdown
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- gfxSleepMilliseconds(10);
- // zero function page, all registers
- write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
- gfxSleepMilliseconds(10);
-
-
- // zero all LED registers on all 8 pages, and enable the mask
- __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
- for(uint8_t i=0; i<8; i++) {
- write_ram(g, i, 0, IS31_FRAME_SIZE);
- gfxSleepMilliseconds(1);
- }
-
- // software shutdown disable (i.e. turn stuff on)
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- gfxSleepMilliseconds(10);
-
- // Finish Init
- post_init_board(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOff;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
- LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH))
- return;
-
- PRIV(g)->page++;
- PRIV(g)->page %= 2;
- // TODO: some smarter algorithm for this
- // We should run only one physical page at a time
- // This way we don't need to send so much data, and
- // we could use slightly less memory
- uint8_t* src = PRIV(g)->frame_buffer;
- for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
- for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
- uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
- PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
- ++src;
- }
- }
- write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
- gfxSleepMilliseconds(1);
- write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
- }
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
- LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = g->p.y;
- break;
- }
- PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
- g->flags |= GDISP_FLG_NEEDFLUSH;
- }
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
- LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = g->p.y;
- break;
- }
- return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
- }
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
- LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch(g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr)
- return;
- switch((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- break;
- case powerOn:
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr)
- return;
- switch((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_BACKLIGHT:
- if (g->g.Backlight == (unsigned)g->p.ptr)
- return;
- unsigned val = (unsigned)g->p.ptr;
- g->g.Backlight = val > 100 ? 100 : val;
- g->flags |= GDISP_FLG_NEEDFLUSH;
- return;
- }
- }
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-
-#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
+++ /dev/null
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
- ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
- palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
- // Operation complete callback or @p NULL.
- .end_cb = NULL,
- //The chip select line port - when not using pcs.
- .ssport = ST7565_GPIOPORT,
- // brief The chip select line pad number - when not using pcs.
- .sspad=ST7565_SS_PIN,
- // SPI initialization data.
- .tar0 =
- SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
- | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
- | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
- | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
- | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
- | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to acquire
- // spiAcquireBus(&SPID1);
- spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to release
- //spiReleaseBus(&SPID1);
- spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
- palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
- palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
- spiInit();
- spiStart(&SPID1, &spi1config);
- release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
- (void) g;
- if (state) {
- palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
- else {
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
- palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
+++ /dev/null
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT 32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH 128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST 35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT 100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
-
-#include "drivers/gdisp/st7565ergodox/st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility. */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER 0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-typedef struct{
- bool_t buffer2;
- uint8_t data_pos;
- uint8_t data[16];
- uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g) ((PrivData*)g->priv)
-#define RAM(g) (PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
- PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
-
-static GFXINLINE void flush_cmd(GDisplay* g) {
- write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
- PRIV(g)->data_pos = 0;
-}
-
-#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us) gfxSleepMicroseconds(us)
-#define delay_ms(ms) gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y) (1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(sizeof(PrivData));
- PRIV(g)->buffer2 = false;
- PRIV(g)->data_pos = 0;
-
- // Initialise the board interface
- init_board(g);
-
- // Hardware reset
- setpin_reset(g, TRUE);
- gfxSleepMilliseconds(20);
- setpin_reset(g, FALSE);
- gfxSleepMilliseconds(20);
- acquire_bus(g);
- enter_cmd_mode(g);
-
- write_cmd(g, ST7565_RESET);
- write_cmd(g, ST7565_LCD_BIAS);
- write_cmd(g, ST7565_ADC);
- write_cmd(g, ST7565_COM_SCAN);
-
- write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
- write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
- // turn on internal power supply (VC=1, VR=1, VF=1)
- write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
- write_cmd(g, ST7565_INVERT_DISPLAY);
- write_cmd(g, ST7565_ALLON_NORMAL);
-
- write_cmd(g, ST7565_START_LINE | 0);
- write_cmd(g, ST7565_RMW);
- flush_cmd(g);
-
- // Finish Init
- post_init_board(g);
-
- // Release the bus
- release_bus(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOff;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- unsigned p;
-
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH))
- return;
-
- acquire_bus(g);
- enter_cmd_mode(g);
- unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
- for (p = 0; p < 4; p++) {
- write_cmd(g, ST7565_PAGE | (p + dstOffset));
- write_cmd(g, ST7565_COLUMN_MSB | 0);
- write_cmd(g, ST7565_COLUMN_LSB | 0);
- write_cmd(g, ST7565_RMW);
- flush_cmd(g);
- enter_data_mode(g);
- write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
- enter_cmd_mode(g);
- }
- unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
- write_cmd(g, ST7565_START_LINE | line);
- flush_cmd(g);
- PRIV(g)->buffer2 = !PRIV(g)->buffer2;
- release_bus(g);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- if (gdispColor2Native(g->p.color) != Black)
- RAM(g)[xyaddr(x, y)] |= xybit(y);
- else
- RAM(g)[xyaddr(x, y)] &= ~xybit(y);
- g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#endif
-
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
- uint8_t* buffer = (uint8_t*)g->p.ptr;
- int linelength = g->p.cx;
- for (int i = 0; i < g->p.cy; i++) {
- unsigned dstx = g->p.x;
- unsigned dsty = g->p.y + i;
- unsigned srcx = g->p.x1;
- unsigned srcy = g->p.y1 + i;
- unsigned srcbit = srcy * g->p.x2 + srcx;
- for(int j=0; j < linelength; j++) {
- uint8_t src = buffer[srcbit / 8];
- uint8_t bit = 7-(srcbit % 8);
- uint8_t bitset = (src >> bit) & 1;
- uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
- if (bitset) {
- *dst |= xybit(dsty);
- }
- else {
- *dst &= ~xybit(dsty);
- }
- dstx++;
- srcbit++;
- }
- }
- g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch(g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr)
- return;
- switch((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- acquire_bus(g);
- enter_cmd_mode(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- flush_cmd(g);
- release_bus(g);
- break;
- case powerOn:
- acquire_bus(g);
- enter_cmd_mode(g);
- write_cmd(g, ST7565_DISPLAY_ON);
- flush_cmd(g);
- release_bus(g);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr)
- return;
- switch((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_CONTRAST:
- g->g.Contrast = (unsigned)g->p.ptr & 63;
- acquire_bus(g);
- enter_cmd_mode(g);
- write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
- flush_cmd(g);
- release_bus(g);
- return;
- }
-}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
+++ /dev/null
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-#define GDISP_HARDWARE_BITFILLS TRUE
-
-#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
+++ /dev/null
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST 0x81
-#define ST7565_ALLON_NORMAL 0xA4
-#define ST7565_ALLON 0xA5
-#define ST7565_POSITIVE_DISPLAY 0xA6
-#define ST7565_INVERT_DISPLAY 0xA7
-#define ST7565_DISPLAY_OFF 0xAE
-#define ST7565_DISPLAY_ON 0xAF
-
-#define ST7565_LCD_BIAS_7 0xA3
-#define ST7565_LCD_BIAS_9 0xA2
-
-#define ST7565_ADC_NORMAL 0xA0
-#define ST7565_ADC_REVERSE 0xA1
-
-#define ST7565_COM_SCAN_INC 0xC0
-#define ST7565_COM_SCAN_DEC 0xC8
-
-#define ST7565_START_LINE 0x40
-#define ST7565_PAGE 0xB0
-#define ST7565_COLUMN_MSB 0x10
-#define ST7565_COLUMN_LSB 0x00
-#define ST7565_RMW 0xE0
-
-#define ST7565_RESISTOR_RATIO 0x20
-#define ST7565_POWER_CONTROL 0x28
-
-#define ST7565_RESET 0xE2
-
-#endif /* _ST7565_H */
#ifndef _GFXCONF_H
#define _GFXCONF_H
-
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS TRUE
-//#define GFX_USE_OS_FREERTOS FALSE
-// #define GFX_FREERTOS_USE_TRACE FALSE
-//#define GFX_USE_OS_WIN32 FALSE
-//#define GFX_USE_OS_LINUX FALSE
-//#define GFX_USE_OS_OSX FALSE
-//#define GFX_USE_OS_ECOS FALSE
-//#define GFX_USE_OS_RAWRTOS FALSE
-//#define GFX_USE_OS_ARDUINO FALSE
-//#define GFX_USE_OS_KEIL FALSE
-//#define GFX_USE_OS_CMSIS FALSE
-//#define GFX_USE_OS_RAW32 FALSE
-// #define INTERRUPTS_OFF() optional_code
-// #define INTERRUPTS_ON() optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS FALSE
-#define GOS_NEED_X_HEAP FALSE
-
-// Options that (should where relevant) apply to all operating systems
- #define GFX_NO_INLINE FALSE
-// #define GFX_COMPILER GFX_COMPILER_UNKNOWN
-// #define GFX_CPU GFX_CPU_UNKNOWN
-// #define GFX_OS_HEAP_SIZE 0
-// #define GFX_OS_NO_INIT FALSE
-// #define GFX_OS_INIT_NO_WARNING FALSE
-// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine
-// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine
-// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP TRUE
-
-//#define GDISP_NEED_AUTOFLUSH FALSE
-//#define GDISP_NEED_TIMERFLUSH FALSE
-//#define GDISP_NEED_VALIDATION TRUE
-//#define GDISP_NEED_CLIP TRUE
-#define GDISP_NEED_CIRCLE TRUE
-#define GDISP_NEED_ELLIPSE TRUE
-#define GDISP_NEED_ARC TRUE
-#define GDISP_NEED_ARCSECTORS TRUE
-#define GDISP_NEED_CONVEX_POLYGON TRUE
-//#define GDISP_NEED_SCROLL FALSE
-#define GDISP_NEED_PIXELREAD TRUE
-#define GDISP_NEED_CONTROL TRUE
-//#define GDISP_NEED_QUERY FALSE
-//#define GDISP_NEED_MULTITHREAD FALSE
-//#define GDISP_NEED_STREAMING FALSE
-#define GDISP_NEED_TEXT TRUE
-// #define GDISP_NEED_TEXT_WORDWRAP FALSE
-// #define GDISP_NEED_ANTIALIAS FALSE
-// #define GDISP_NEED_UTF8 FALSE
- #define GDISP_NEED_TEXT_KERNING TRUE
-// #define GDISP_INCLUDE_FONT_UI1 FALSE
-// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font.
-// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE
- #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE
-// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE
-// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE
- #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE
-// #define GDISP_INCLUDE_USER_FONTS FALSE
-
-//#define GDISP_NEED_IMAGE FALSE
-// #define GDISP_NEED_IMAGE_NATIVE FALSE
-// #define GDISP_NEED_IMAGE_GIF FALSE
-// #define GDISP_NEED_IMAGE_BMP FALSE
-// #define GDISP_NEED_IMAGE_BMP_1 FALSE
-// #define GDISP_NEED_IMAGE_BMP_4 FALSE
-// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE
-// #define GDISP_NEED_IMAGE_BMP_8 FALSE
-// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE
-// #define GDISP_NEED_IMAGE_BMP_16 FALSE
-// #define GDISP_NEED_IMAGE_BMP_24 FALSE
-// #define GDISP_NEED_IMAGE_BMP_32 FALSE
-// #define GDISP_NEED_IMAGE_JPG FALSE
-// #define GDISP_NEED_IMAGE_PNG FALSE
-// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP TRUE
-#endif
-// #define GDISP_NEED_PIXMAP_IMAGE FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE 128
-//#define GDISP_STARTUP_COLOR Black
-#define GDISP_NEED_STARTUP_LOGO FALSE
-
-//#define GDISP_TOTAL_DISPLAYS 2
-
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX
-#else
-#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX
-#endif
-
- #ifdef GDISP_DRIVER_LIST
- // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
- #define GDISP_HARDWARE_STREAM_WRITE FALSE
- #define GDISP_HARDWARE_STREAM_READ FALSE
- #define GDISP_HARDWARE_STREAM_POS FALSE
- #define GDISP_HARDWARE_DRAWPIXEL TRUE
- #define GDISP_HARDWARE_CLEARS FALSE
- #define GDISP_HARDWARE_FILLS FALSE
- //#define GDISP_HARDWARE_BITFILLS FALSE
- #define GDISP_HARDWARE_SCROLL FALSE
- #define GDISP_HARDWARE_PIXELREAD TRUE
- #define GDISP_HARDWARE_CONTROL TRUE
- #define GDISP_HARDWARE_QUERY FALSE
- #define GDISP_HARDWARE_CLIP FALSE
-
- #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888
- #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET FALSE
-// #define GDISP_GFXNET_PORT 13001
-// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE
-// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE
-// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER FALSE
-// #define GWIN_REDRAW_IMMEDIATE FALSE
-// #define GWIN_REDRAW_SINGLEOP FALSE
-// #define GWIN_NEED_FLASHING FALSE
-// #define GWIN_FLASHING_PERIOD 250
-
-//#define GWIN_NEED_CONSOLE FALSE
-// #define GWIN_CONSOLE_USE_HISTORY FALSE
-// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE
-// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE
-// #define GWIN_CONSOLE_ESCSEQ FALSE
-// #define GWIN_CONSOLE_USE_BASESTREAM FALSE
-// #define GWIN_CONSOLE_USE_FLOAT FALSE
-//#define GWIN_NEED_GRAPH FALSE
-//#define GWIN_NEED_GL3D FALSE
-
-//#define GWIN_NEED_WIDGET FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1
-// #define GWIN_NEED_LABEL FALSE
-// #define GWIN_LABEL_ATTRIBUTE FALSE
-// #define GWIN_NEED_BUTTON FALSE
-// #define GWIN_BUTTON_LAZY_RELEASE FALSE
-// #define GWIN_NEED_SLIDER FALSE
-// #define GWIN_SLIDER_NOSNAP FALSE
-// #define GWIN_SLIDER_DEAD_BAND 5
-// #define GWIN_SLIDER_TOGGLE_INC 20
-// #define GWIN_NEED_CHECKBOX FALSE
-// #define GWIN_NEED_IMAGE FALSE
-// #define GWIN_NEED_IMAGE_ANIMATION FALSE
-// #define GWIN_NEED_RADIO FALSE
-// #define GWIN_NEED_LIST FALSE
-// #define GWIN_NEED_LIST_IMAGES FALSE
-// #define GWIN_NEED_PROGRESSBAR FALSE
-// #define GWIN_PROGRESSBAR_AUTO FALSE
-// #define GWIN_NEED_KEYBOARD FALSE
-// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1
-// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE
-// #define GWIN_NEED_TEXTEDIT FALSE
-// #define GWIN_FLAT_STYLING FALSE
-// #define GWIN_WIDGET_TAGS FALSE
-
-//#define GWIN_NEED_CONTAINERS FALSE
-// #define GWIN_NEED_CONTAINER FALSE
-// #define GWIN_NEED_FRAME FALSE
-// #define GWIN_NEED_TABSET FALSE
-// #define GWIN_TABSET_TABHEIGHT 18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE FALSE
-//#define GEVENT_MAXIMUM_SIZE 32
-//#define GEVENT_MAX_SOURCE_LISTENERS 32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER FALSE
-
-//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE 2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE FALSE
-
-//#define GQUEUE_NEED_ASYNC FALSE
-//#define GQUEUE_NEED_GSYNC FALSE
-//#define GQUEUE_NEED_FSYNC FALSE
-//#define GQUEUE_NEED_BUFFERS FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT FALSE
-
-//#define GINPUT_NEED_MOUSE FALSE
-// #define GINPUT_TOUCH_STARTRAW FALSE
-// #define GINPUT_TOUCH_NOTOUCH FALSE
-// #define GINPUT_TOUCH_NOCALIBRATE FALSE
-// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE
-// #define GINPUT_MOUSE_POLL_PERIOD 25
-// #define GINPUT_MOUSE_CLICK_TIME 300
-// #define GINPUT_TOUCH_CXTCLICK_TIME 700
-// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE
-// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE
-// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD FALSE
-// #define GINPUT_KEYBOARD_POLL_PERIOD 200
-// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-// #define GKEYBOARD_LAYOUT_OFF FALSE
-// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE
-//#define GINPUT_NEED_TOGGLE FALSE
-//#define GINPUT_NEED_DIAL FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE FALSE
-
-//#define GFILE_NEED_PRINTG FALSE
-//#define GFILE_NEED_SCANG FALSE
-//#define GFILE_NEED_STRINGS FALSE
-//#define GFILE_NEED_FILELISTS FALSE
-//#define GFILE_NEED_STDIO FALSE
-//#define GFILE_NEED_NOAUTOMOUNT FALSE
-//#define GFILE_NEED_NOAUTOSYNC FALSE
-
-//#define GFILE_NEED_MEMFS FALSE
-//#define GFILE_NEED_ROMFS FALSE
-//#define GFILE_NEED_RAMFS FALSE
-//#define GFILE_NEED_FATFS FALSE
-//#define GFILE_NEED_NATIVEFS FALSE
-//#define GFILE_NEED_CHBIOSFS FALSE
-
-//#define GFILE_ALLOW_FLOATS FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC FALSE
-//#define GFILE_MAX_GFILES 3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES 4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN GFX_USE_GAUDIO
-// #define GAUDIO_NEED_PLAY FALSE
-// #define GAUDIO_NEED_RECORD FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC TRUE
-
-//#define GMISC_NEED_ARRAYOPS FALSE
-//#define GMISC_NEED_FASTTRIG FALSE
-//#define GMISC_NEED_FIXEDTRIG FALSE
-//#define GMISC_NEED_INVSQRT FALSE
-// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE
-// #define GMISC_INVSQRT_REAL_SLOW FALSE
-#define GMISC_NEED_MATRIXFLOAT2D TRUE
-#define GMISC_NEED_MATRIXFIXED2D FALSE
+#include "common_gfxconf.h"
#endif /* _GFXCONF_H */
# project specific files
SRC = matrix.c \
- led.c \
- animations.c
+ led.c
## chip/board settings
# - the next two should match the directories in
MIDI_ENABLE = no
RGBLIGHT_ENABLE = no
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
\ No newline at end of file
+LCD_DRIVER = st7565
+LCD_WIDTH = 128
+LCD_HEIGHT = 32
+
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 7
+LED_HEIGHT = 7
\ No newline at end of file
#include "lcd_backlight_keyframes.h"
#include "system/serial_link.h"
#include "led.h"
-#include "animations.h"
+#include "default_animations.h"
static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
// this prevents the color from changing when activating the layer
// momentarily
.frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)},
- .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color},
+ .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color},
};
void initialize_user_visualizer(visualizer_state_t* state) {
#include "lcd_keyframes.h"
#include "lcd_backlight_keyframes.h"
#include "system/serial_link.h"
-#include "animations.h"
+#include "default_animations.h"
static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
.num_frames = 1,
.loop = false,
.frame_lengths = {gfxMillisecondsToTicks(0)},
- .frame_functions = {backlight_keyframe_set_color},
+ .frame_functions = {lcd_backlight_keyframe_set_color},
};
bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) {
.num_frames = 2,
.loop = true,
.frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)},
- .frame_functions = {backlight_keyframe_set_color, swap_led_target_color},
+ .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color},
};
// The LCD animation alternates between the layer name display and a
## Wiring Layout
-
+
## Pinout
-#include "light_ws2812.h"
+#include "ws2812.h"
#include "rgbsps.h"
struct cRGB led[RGBSPS_NUM];
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-SRC += $(QUANTUM_DIR)/light_ws2812.c
+SRC += ws2812.c
SRC += rgbsps.c
-SRC += $(QUANTUM_DIR)/analog.c
+SRC += analog.c
SRC += matrix.c
+++ /dev/null
-// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
-// See gfxfont.h for newer custom bitmap font info.
-
-#ifndef FONT5X7_H
-#define FONT5X7_H
-
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
-#elif defined(ESP8266)
- #include <pgmspace.h>
-#else
- #define PROGMEM
-#endif
-
-// Standard ASCII 5x7 font
-
-static const unsigned char font[] PROGMEM = {
- 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
- 0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
- 0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
- 0x18, 0x3C, 0x7E, 0x3C, 0x18,
- 0x1C, 0x57, 0x7D, 0x57, 0x1C,
- 0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
- 0x00, 0x18, 0x3C, 0x18, 0x00,
- 0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
- 0x00, 0x18, 0x24, 0x18, 0x00,
- 0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
- 0x30, 0x48, 0x3A, 0x06, 0x0E,
- 0x26, 0x29, 0x79, 0x29, 0x26,
- 0x40, 0x7F, 0x05, 0x05, 0x07,
- 0x40, 0x7F, 0x05, 0x25, 0x3F,
- 0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
- 0x7F, 0x3E, 0x1C, 0x1C, 0x08,
- 0x08, 0x1C, 0x1C, 0x3E, 0x7F,
- 0x14, 0x22, 0x7F, 0x22, 0x14,
- 0x5F, 0x5F, 0x00, 0x5F, 0x5F,
- 0x06, 0x09, 0x7F, 0x01, 0x7F,
- 0x00, 0x66, 0x89, 0x95, 0x6A,
- 0x60, 0x60, 0x60, 0x60, 0x60,
- 0x94, 0xA2, 0xFF, 0xA2, 0x94,
- 0x08, 0x04, 0x7E, 0x04, 0x08,
- 0x10, 0x20, 0x7E, 0x20, 0x10,
- 0x08, 0x08, 0x2A, 0x1C, 0x08,
- 0x08, 0x1C, 0x2A, 0x08, 0x08,
- 0x1E, 0x10, 0x10, 0x10, 0x10,
- 0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
- 0x30, 0x38, 0x3E, 0x38, 0x30,
- 0x06, 0x0E, 0x3E, 0x0E, 0x06,
- 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x5F, 0x00, 0x00,
- 0x00, 0x07, 0x00, 0x07, 0x00,
- 0x14, 0x7F, 0x14, 0x7F, 0x14,
- 0x24, 0x2A, 0x7F, 0x2A, 0x12,
- 0x23, 0x13, 0x08, 0x64, 0x62,
- 0x36, 0x49, 0x56, 0x20, 0x50,
- 0x00, 0x08, 0x07, 0x03, 0x00,
- 0x00, 0x1C, 0x22, 0x41, 0x00,
- 0x00, 0x41, 0x22, 0x1C, 0x00,
- 0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
- 0x08, 0x08, 0x3E, 0x08, 0x08,
- 0x00, 0x80, 0x70, 0x30, 0x00,
- 0x08, 0x08, 0x08, 0x08, 0x08,
- 0x00, 0x00, 0x60, 0x60, 0x00,
- 0x20, 0x10, 0x08, 0x04, 0x02,
- 0x3E, 0x51, 0x49, 0x45, 0x3E,
- 0x00, 0x42, 0x7F, 0x40, 0x00,
- 0x72, 0x49, 0x49, 0x49, 0x46,
- 0x21, 0x41, 0x49, 0x4D, 0x33,
- 0x18, 0x14, 0x12, 0x7F, 0x10,
- 0x27, 0x45, 0x45, 0x45, 0x39,
- 0x3C, 0x4A, 0x49, 0x49, 0x31,
- 0x41, 0x21, 0x11, 0x09, 0x07,
- 0x36, 0x49, 0x49, 0x49, 0x36,
- 0x46, 0x49, 0x49, 0x29, 0x1E,
- 0x00, 0x00, 0x14, 0x00, 0x00,
- 0x00, 0x40, 0x34, 0x00, 0x00,
- 0x00, 0x08, 0x14, 0x22, 0x41,
- 0x14, 0x14, 0x14, 0x14, 0x14,
- 0x00, 0x41, 0x22, 0x14, 0x08,
- 0x02, 0x01, 0x59, 0x09, 0x06,
- 0x3E, 0x41, 0x5D, 0x59, 0x4E,
- 0x7C, 0x12, 0x11, 0x12, 0x7C,
- 0x7F, 0x49, 0x49, 0x49, 0x36,
- 0x3E, 0x41, 0x41, 0x41, 0x22,
- 0x7F, 0x41, 0x41, 0x41, 0x3E,
- 0x7F, 0x49, 0x49, 0x49, 0x41,
- 0x7F, 0x09, 0x09, 0x09, 0x01,
- 0x3E, 0x41, 0x41, 0x51, 0x73,
- 0x7F, 0x08, 0x08, 0x08, 0x7F,
- 0x00, 0x41, 0x7F, 0x41, 0x00,
- 0x20, 0x40, 0x41, 0x3F, 0x01,
- 0x7F, 0x08, 0x14, 0x22, 0x41,
- 0x7F, 0x40, 0x40, 0x40, 0x40,
- 0x7F, 0x02, 0x1C, 0x02, 0x7F,
- 0x7F, 0x04, 0x08, 0x10, 0x7F,
- 0x3E, 0x41, 0x41, 0x41, 0x3E,
- 0x7F, 0x09, 0x09, 0x09, 0x06,
- 0x3E, 0x41, 0x51, 0x21, 0x5E,
- 0x7F, 0x09, 0x19, 0x29, 0x46,
- 0x26, 0x49, 0x49, 0x49, 0x32,
- 0x03, 0x01, 0x7F, 0x01, 0x03,
- 0x3F, 0x40, 0x40, 0x40, 0x3F,
- 0x1F, 0x20, 0x40, 0x20, 0x1F,
- 0x3F, 0x40, 0x38, 0x40, 0x3F,
- 0x63, 0x14, 0x08, 0x14, 0x63,
- 0x03, 0x04, 0x78, 0x04, 0x03,
- 0x61, 0x59, 0x49, 0x4D, 0x43,
- 0x00, 0x7F, 0x41, 0x41, 0x41,
- 0x02, 0x04, 0x08, 0x10, 0x20,
- 0x00, 0x41, 0x41, 0x41, 0x7F,
- 0x04, 0x02, 0x01, 0x02, 0x04,
- 0x40, 0x40, 0x40, 0x40, 0x40,
- 0x00, 0x03, 0x07, 0x08, 0x00,
- 0x20, 0x54, 0x54, 0x78, 0x40,
- 0x7F, 0x28, 0x44, 0x44, 0x38,
- 0x38, 0x44, 0x44, 0x44, 0x28,
- 0x38, 0x44, 0x44, 0x28, 0x7F,
- 0x38, 0x54, 0x54, 0x54, 0x18,
- 0x00, 0x08, 0x7E, 0x09, 0x02,
- 0x18, 0xA4, 0xA4, 0x9C, 0x78,
- 0x7F, 0x08, 0x04, 0x04, 0x78,
- 0x00, 0x44, 0x7D, 0x40, 0x00,
- 0x20, 0x40, 0x40, 0x3D, 0x00,
- 0x7F, 0x10, 0x28, 0x44, 0x00,
- 0x00, 0x41, 0x7F, 0x40, 0x00,
- 0x7C, 0x04, 0x78, 0x04, 0x78,
- 0x7C, 0x08, 0x04, 0x04, 0x78,
- 0x38, 0x44, 0x44, 0x44, 0x38,
- 0xFC, 0x18, 0x24, 0x24, 0x18,
- 0x18, 0x24, 0x24, 0x18, 0xFC,
- 0x7C, 0x08, 0x04, 0x04, 0x08,
- 0x48, 0x54, 0x54, 0x54, 0x24,
- 0x04, 0x04, 0x3F, 0x44, 0x24,
- 0x3C, 0x40, 0x40, 0x20, 0x7C,
- 0x1C, 0x20, 0x40, 0x20, 0x1C,
- 0x3C, 0x40, 0x30, 0x40, 0x3C,
- 0x44, 0x28, 0x10, 0x28, 0x44,
- 0x4C, 0x90, 0x90, 0x90, 0x7C,
- 0x44, 0x64, 0x54, 0x4C, 0x44,
- 0x00, 0x08, 0x36, 0x41, 0x00,
- 0x00, 0x00, 0x77, 0x00, 0x00,
- 0x00, 0x41, 0x36, 0x08, 0x00,
- 0x02, 0x01, 0x02, 0x04, 0x02,
- 0x3C, 0x26, 0x23, 0x26, 0x3C,
- 0x1E, 0xA1, 0xA1, 0x61, 0x12,
- 0x3A, 0x40, 0x40, 0x20, 0x7A,
- 0x38, 0x54, 0x54, 0x55, 0x59,
- 0x21, 0x55, 0x55, 0x79, 0x41,
- 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
- 0x21, 0x55, 0x54, 0x78, 0x40,
- 0x20, 0x54, 0x55, 0x79, 0x40,
- 0x0C, 0x1E, 0x52, 0x72, 0x12,
- 0x39, 0x55, 0x55, 0x55, 0x59,
- 0x39, 0x54, 0x54, 0x54, 0x59,
- 0x39, 0x55, 0x54, 0x54, 0x58,
- 0x00, 0x00, 0x45, 0x7C, 0x41,
- 0x00, 0x02, 0x45, 0x7D, 0x42,
- 0x00, 0x01, 0x45, 0x7C, 0x40,
- 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
- 0xF0, 0x28, 0x25, 0x28, 0xF0,
- 0x7C, 0x54, 0x55, 0x45, 0x00,
- 0x20, 0x54, 0x54, 0x7C, 0x54,
- 0x7C, 0x0A, 0x09, 0x7F, 0x49,
- 0x32, 0x49, 0x49, 0x49, 0x32,
- 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
- 0x32, 0x4A, 0x48, 0x48, 0x30,
- 0x3A, 0x41, 0x41, 0x21, 0x7A,
- 0x3A, 0x42, 0x40, 0x20, 0x78,
- 0x00, 0x9D, 0xA0, 0xA0, 0x7D,
- 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
- 0x3D, 0x40, 0x40, 0x40, 0x3D,
- 0x3C, 0x24, 0xFF, 0x24, 0x24,
- 0x48, 0x7E, 0x49, 0x43, 0x66,
- 0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
- 0xFF, 0x09, 0x29, 0xF6, 0x20,
- 0xC0, 0x88, 0x7E, 0x09, 0x03,
- 0x20, 0x54, 0x54, 0x79, 0x41,
- 0x00, 0x00, 0x44, 0x7D, 0x41,
- 0x30, 0x48, 0x48, 0x4A, 0x32,
- 0x38, 0x40, 0x40, 0x22, 0x7A,
- 0x00, 0x7A, 0x0A, 0x0A, 0x72,
- 0x7D, 0x0D, 0x19, 0x31, 0x7D,
- 0x26, 0x29, 0x29, 0x2F, 0x28,
- 0x26, 0x29, 0x29, 0x29, 0x26,
- 0x30, 0x48, 0x4D, 0x40, 0x20,
- 0x38, 0x08, 0x08, 0x08, 0x08,
- 0x08, 0x08, 0x08, 0x08, 0x38,
- 0x2F, 0x10, 0xC8, 0xAC, 0xBA,
- 0x2F, 0x10, 0x28, 0x34, 0xFA,
- 0x00, 0x00, 0x7B, 0x00, 0x00,
- 0x08, 0x14, 0x2A, 0x14, 0x22,
- 0x22, 0x14, 0x2A, 0x14, 0x08,
- 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
- 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
- 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
- 0x00, 0x00, 0x00, 0xFF, 0x00,
- 0x10, 0x10, 0x10, 0xFF, 0x00,
- 0x14, 0x14, 0x14, 0xFF, 0x00,
- 0x10, 0x10, 0xFF, 0x00, 0xFF,
- 0x10, 0x10, 0xF0, 0x10, 0xF0,
- 0x14, 0x14, 0x14, 0xFC, 0x00,
- 0x14, 0x14, 0xF7, 0x00, 0xFF,
- 0x00, 0x00, 0xFF, 0x00, 0xFF,
- 0x14, 0x14, 0xF4, 0x04, 0xFC,
- 0x14, 0x14, 0x17, 0x10, 0x1F,
- 0x10, 0x10, 0x1F, 0x10, 0x1F,
- 0x14, 0x14, 0x14, 0x1F, 0x00,
- 0x10, 0x10, 0x10, 0xF0, 0x00,
- 0x00, 0x00, 0x00, 0x1F, 0x10,
- 0x10, 0x10, 0x10, 0x1F, 0x10,
- 0x10, 0x10, 0x10, 0xF0, 0x10,
- 0x00, 0x00, 0x00, 0xFF, 0x10,
- 0x10, 0x10, 0x10, 0x10, 0x10,
- 0x10, 0x10, 0x10, 0xFF, 0x10,
- 0x00, 0x00, 0x00, 0xFF, 0x14,
- 0x00, 0x00, 0xFF, 0x00, 0xFF,
- 0x00, 0x00, 0x1F, 0x10, 0x17,
- 0x00, 0x00, 0xFC, 0x04, 0xF4,
- 0x14, 0x14, 0x17, 0x10, 0x17,
- 0x14, 0x14, 0xF4, 0x04, 0xF4,
- 0x00, 0x00, 0xFF, 0x00, 0xF7,
- 0x14, 0x14, 0x14, 0x14, 0x14,
- 0x14, 0x14, 0xF7, 0x00, 0xF7,
- 0x14, 0x14, 0x14, 0x17, 0x14,
- 0x10, 0x10, 0x1F, 0x10, 0x1F,
- 0x14, 0x14, 0x14, 0xF4, 0x14,
- 0x10, 0x10, 0xF0, 0x10, 0xF0,
- 0x00, 0x00, 0x1F, 0x10, 0x1F,
- 0x00, 0x00, 0x00, 0x1F, 0x14,
- 0x00, 0x00, 0x00, 0xFC, 0x14,
- 0x00, 0x00, 0xF0, 0x10, 0xF0,
- 0x10, 0x10, 0xFF, 0x10, 0xFF,
- 0x14, 0x14, 0x14, 0xFF, 0x14,
- 0x10, 0x10, 0x10, 0x1F, 0x00,
- 0x00, 0x00, 0x00, 0xF0, 0x10,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
- 0xFF, 0xFF, 0xFF, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0xFF, 0xFF,
- 0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
- 0x38, 0x44, 0x44, 0x38, 0x44,
- 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
- 0x7E, 0x02, 0x02, 0x06, 0x06,
- 0x02, 0x7E, 0x02, 0x7E, 0x02,
- 0x63, 0x55, 0x49, 0x41, 0x63,
- 0x38, 0x44, 0x44, 0x3C, 0x04,
- 0x40, 0x7E, 0x20, 0x1E, 0x20,
- 0x06, 0x02, 0x7E, 0x02, 0x02,
- 0x99, 0xA5, 0xE7, 0xA5, 0x99,
- 0x1C, 0x2A, 0x49, 0x2A, 0x1C,
- 0x4C, 0x72, 0x01, 0x72, 0x4C,
- 0x30, 0x4A, 0x4D, 0x4D, 0x30,
- 0x30, 0x48, 0x78, 0x48, 0x30,
- 0xBC, 0x62, 0x5A, 0x46, 0x3D,
- 0x3E, 0x49, 0x49, 0x49, 0x00,
- 0x7E, 0x01, 0x01, 0x01, 0x7E,
- 0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
- 0x44, 0x44, 0x5F, 0x44, 0x44,
- 0x40, 0x51, 0x4A, 0x44, 0x40,
- 0x40, 0x44, 0x4A, 0x51, 0x40,
- 0x00, 0x00, 0xFF, 0x01, 0x03,
- 0xE0, 0x80, 0xFF, 0x00, 0x00,
- 0x08, 0x08, 0x6B, 0x6B, 0x08,
- 0x36, 0x12, 0x36, 0x24, 0x36,
- 0x06, 0x0F, 0x09, 0x0F, 0x06,
- 0x00, 0x00, 0x18, 0x18, 0x00,
- 0x00, 0x00, 0x10, 0x10, 0x00,
- 0x30, 0x40, 0xFF, 0x01, 0x01,
- 0x00, 0x1F, 0x01, 0x01, 0x1E,
- 0x00, 0x19, 0x1D, 0x17, 0x12,
- 0x00, 0x3C, 0x3C, 0x3C, 0x3C,
- 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP
-};
-#endif // FONT5X7_H
+++ /dev/null
-/*
- pins_arduino.h - Pin definition functions for Arduino
- Part of Arduino - http://www.arduino.cc/
-
- Copyright (c) 2007 David A. Mellis
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General
- Public License along with this library; if not, write to the
- Free Software Foundation, Inc., 59 Temple Place, Suite 330,
- Boston, MA 02111-1307 USA
-
- $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS 30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0 PORTD |= (1<<5)
-#define TXLED1 PORTD &= ~(1<<5)
-#define RXLED0 PORTB |= (1<<0)
-#define RXLED1 PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24; // D4
-static const uint8_t ADC7 = 25; // D6
-static const uint8_t ADC8 = 26; // D8
-static const uint8_t ADC9 = 27; // D9
-static const uint8_t ADC10 = 28; // D10
-static const uint8_t ADC11 = 29; // D12
-
-#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-// __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM). Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0 PD2 RXD1/INT2
-// D1 PD3 TXD1/INT3
-// D2 PD1 SDA SDA/INT1
-// D3# PD0 PWM8/SCL OC0B/SCL/INT0
-// D4 A6 PD4 ADC8
-// D5# PC6 ??? OC3A/#OC4A
-// D6# A7 PD7 FastPWM #OC4D/ADC10
-// D7 PE6 INT6/AIN0
-//
-// D8 A8 PB4 ADC11/PCINT4
-// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5
-// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6
-// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7
-// D12 A11 PD6 T1/#OC4D/ADC9
-// D13# PC7 PWM10 CLK0/OC4A
-//
-// A0 D18 PF7 ADC7
-// A1 D19 PF6 ADC6
-// A2 D20 PF5 ADC5
-// A3 D21 PF4 ADC4
-// A4 D22 PF1 ADC1
-// A5 D23 PF0 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO D14 PB3 MISO,PCINT3
-// SCK D15 PB1 SCK,PCINT1
-// MOSI D16 PB2 MOSI,PCINT2
-// SS D17 PB0 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED D24 PD5 XCK1
-// RXLED D17 PB0
-// HWB PE2 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &DDRB,
- (uint16_t) &DDRC,
- (uint16_t) &DDRD,
- (uint16_t) &DDRE,
- (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PORTB,
- (uint16_t) &PORTC,
- (uint16_t) &PORTD,
- (uint16_t) &PORTE,
- (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PINB,
- (uint16_t) &PINC,
- (uint16_t) &PIND,
- (uint16_t) &PINE,
- (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
- PD, // D0 - PD2
- PD, // D1 - PD3
- PD, // D2 - PD1
- PD, // D3 - PD0
- PD, // D4 - PD4
- PC, // D5 - PC6
- PD, // D6 - PD7
- PE, // D7 - PE6
-
- PB, // D8 - PB4
- PB, // D9 - PB5
- PB, // D10 - PB6
- PB, // D11 - PB7
- PD, // D12 - PD6
- PC, // D13 - PC7
-
- PB, // D14 - MISO - PB3
- PB, // D15 - SCK - PB1
- PB, // D16 - MOSI - PB2
- PB, // D17 - SS - PB0
-
- PF, // D18 - A0 - PF7
- PF, // D19 - A1 - PF6
- PF, // D20 - A2 - PF5
- PF, // D21 - A3 - PF4
- PF, // D22 - A4 - PF1
- PF, // D23 - A5 - PF0
-
- PD, // D24 - PD5
- PD, // D25 / D6 - A7 - PD7
- PB, // D26 / D8 - A8 - PB4
- PB, // D27 / D9 - A9 - PB5
- PB, // D28 / D10 - A10 - PB6
- PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
- _BV(2), // D0 - PD2
- _BV(3), // D1 - PD3
- _BV(1), // D2 - PD1
- _BV(0), // D3 - PD0
- _BV(4), // D4 - PD4
- _BV(6), // D5 - PC6
- _BV(7), // D6 - PD7
- _BV(6), // D7 - PE6
-
- _BV(4), // D8 - PB4
- _BV(5), // D9 - PB5
- _BV(6), // D10 - PB6
- _BV(7), // D11 - PB7
- _BV(6), // D12 - PD6
- _BV(7), // D13 - PC7
-
- _BV(3), // D14 - MISO - PB3
- _BV(1), // D15 - SCK - PB1
- _BV(2), // D16 - MOSI - PB2
- _BV(0), // D17 - SS - PB0
-
- _BV(7), // D18 - A0 - PF7
- _BV(6), // D19 - A1 - PF6
- _BV(5), // D20 - A2 - PF5
- _BV(4), // D21 - A3 - PF4
- _BV(1), // D22 - A4 - PF1
- _BV(0), // D23 - A5 - PF0
-
- _BV(5), // D24 - PD5
- _BV(7), // D25 / D6 - A7 - PD7
- _BV(4), // D26 / D8 - A8 - PB4
- _BV(5), // D27 / D9 - A9 - PB5
- _BV(6), // D28 / D10 - A10 - PB6
- _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- TIMER0B, /* 3 */
- NOT_ON_TIMER,
- TIMER3A, /* 5 */
- TIMER4D, /* 6 */
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- TIMER1A, /* 9 */
- TIMER1B, /* 10 */
- TIMER0A, /* 11 */
-
- NOT_ON_TIMER,
- TIMER4A, /* 13 */
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
- 7, // A0 PF7 ADC7
- 6, // A1 PF6 ADC6
- 5, // A2 PF5 ADC5
- 4, // A3 PF4 ADC4
- 1, // A4 PF1 ADC1
- 0, // A5 PF0 ADC0
- 8, // A6 D4 PD4 ADC8
- 10, // A7 D6 PD7 ADC10
- 11, // A8 D8 PB4 ADC11
- 12, // A9 D9 PB5 ADC12
- 13, // A10 D10 PB6 ADC13
- 9 // A11 D12 PD6 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
-// pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR Serial
-#define SERIAL_PORT_USBVIRTUAL Serial
-#define SERIAL_PORT_HARDWARE Serial1
-#define SERIAL_PORT_HARDWARE_OPEN Serial1
-
-#endif /* Pins_Arduino_h */
+++ /dev/null
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "config.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "lets_split.h"
-#include "common/glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble. Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
- uint8_t display[MatrixRows][MatrixCols];
- uint8_t *cursor;
- bool dirty;
-};
-
-static struct CharacterMatrix display;
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-enum ssd1306_cmds {
- DisplayOff = 0xAE,
- DisplayOn = 0xAF,
-
- SetContrast = 0x81,
- DisplayAllOnResume = 0xA4,
-
- DisplayAllOn = 0xA5,
- NormalDisplay = 0xA6,
- InvertDisplay = 0xA7,
- SetDisplayOffset = 0xD3,
- SetComPins = 0xda,
- SetVComDetect = 0xdb,
- SetDisplayClockDiv = 0xD5,
- SetPreCharge = 0xd9,
- SetMultiPlex = 0xa8,
- SetLowColumn = 0x00,
- SetHighColumn = 0x10,
- SetStartLine = 0x40,
-
- SetMemoryMode = 0x20,
- ColumnAddr = 0x21,
- PageAddr = 0x22,
-
- ComScanInc = 0xc0,
- ComScanDec = 0xc8,
- SegRemap = 0xa0,
- SetChargePump = 0x8d,
- ExternalVcc = 0x01,
- SwitchCapVcc = 0x02,
-
- ActivateScroll = 0x2f,
- DeActivateScroll = 0x2e,
- SetVerticalScrollArea = 0xa3,
- RightHorizontalScroll = 0x26,
- LeftHorizontalScroll = 0x27,
- VerticalAndRightHorizontalScroll = 0x29,
- VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
- bool res = false;
-
- if (i2c_start_write(i2cAddress)) {
- xprintf("failed to start write to %d\n", i2cAddress);
- goto done;
- }
-
- if (i2c_master_write(0x0 /* command byte follows */)) {
- print("failed to write control byte\n");
-
- goto done;
- }
-
- if (i2c_master_write(cmd)) {
- xprintf("failed to write command %d\n", cmd);
- goto done;
- }
- res = true;
-done:
- i2c_master_stop();
- return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- if (!_send_cmd1(opr1)) {
- return false;
- }
- return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void matrix_clear(struct CharacterMatrix *matrix);
-
-static void clear_display(void) {
- matrix_clear(&display);
-
- // Clear all of the display bits (there can be random noise
- // in the RAM on startup)
- send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
- send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
- if (i2c_start_write(i2cAddress)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < DisplayWidth; ++col) {
- i2c_master_write(0);
- }
- }
-
- display.dirty = false;
-
-done:
- i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
- sendchar(c);
- iota_gfx_write_char(c);
-
- if (!displaying) {
- iota_gfx_flush();
- }
- return 0;
-}
-#endif
-
-bool iota_gfx_init(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- send_cmd2(SetDisplayClockDiv, 0x80);
- send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
- send_cmd2(SetDisplayOffset, 0);
-
-
- send_cmd1(SetStartLine | 0x0);
- send_cmd2(SetChargePump, 0x14 /* Enable */);
- send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-/// Flips the display orientation 0 degrees
- send_cmd1(SegRemap | 0x1);
- send_cmd1(ComScanDec);
-/*
-// the following Flip the display orientation 180 degrees
- send_cmd1(SegRemap);
- send_cmd1(ComScanInc);
-// end flip */
- send_cmd2(SetComPins, 0x2);
- send_cmd2(SetContrast, 0x8f);
- send_cmd2(SetPreCharge, 0xf1);
- send_cmd2(SetVComDetect, 0x40);
- send_cmd1(DisplayAllOnResume);
- send_cmd1(NormalDisplay);
- send_cmd1(DeActivateScroll);
- send_cmd1(DisplayOn);
-
- send_cmd2(SetContrast, 0); // Dim
-
- clear_display();
-
- success = true;
-
- iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
- print_set_sendchar(capture_sendchar);
-#endif
-
-done:
- return success;
-}
-
-bool iota_gfx_off(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- success = true;
-
-done:
- return success;
-}
-
-bool iota_gfx_on(void) {
- bool success = false;
-
- send_cmd1(DisplayOn);
- success = true;
-
-done:
- return success;
-}
-
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
- *matrix->cursor = c;
- ++matrix->cursor;
-
- if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
- // We went off the end; scroll the display upwards by one line
- memmove(&matrix->display[0], &matrix->display[1],
- MatrixCols * (MatrixRows - 1));
- matrix->cursor = &matrix->display[MatrixRows - 1][0];
- memset(matrix->cursor, ' ', MatrixCols);
- }
-}
-
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
- matrix->dirty = true;
-
- if (c == '\n') {
- // Clear to end of line from the cursor and then move to the
- // start of the next line
- uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
- while (cursor_col++ < MatrixCols) {
- matrix_write_char_inner(matrix, ' ');
- }
- return;
- }
-
- matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
- matrix_write_char(&display, c);
-}
-
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
- const char *end = data + strlen(data);
- while (data < end) {
- matrix_write_char(matrix, *data);
- ++data;
- }
-}
-
-void iota_gfx_write(const char *data) {
- matrix_write(&display, data);
-}
-
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
- while (true) {
- uint8_t c = pgm_read_byte(data);
- if (c == 0) {
- return;
- }
- matrix_write_char(matrix, c);
- ++data;
- }
-}
-
-void iota_gfx_write_P(const char *data) {
- matrix_write_P(&display, data);
-}
-
-static void matrix_clear(struct CharacterMatrix *matrix) {
- memset(matrix->display, ' ', sizeof(matrix->display));
- matrix->cursor = &matrix->display[0][0];
- matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
- matrix_clear(&display);
-}
-
-static void matrix_render(struct CharacterMatrix *matrix) {
- last_flush = timer_read();
- iota_gfx_on();
-#if DEBUG_TO_SCREEN
- ++displaying;
-#endif
-
- // Move to the home position
- send_cmd3(PageAddr, 0, MatrixRows - 1);
- send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
- if (i2c_start_write(i2cAddress)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
-
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < MatrixCols; ++col) {
- const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
- for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
- uint8_t colBits = pgm_read_byte(glyph + glyphCol);
- i2c_master_write(colBits);
- }
-
- // 1 column of space between chars (it's not included in the glyph)
- i2c_master_write(0);
- }
- }
-
- matrix->dirty = false;
-
-done:
- i2c_master_stop();
-#if DEBUG_TO_SCREEN
- --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
- matrix_render(&display);
-}
-
-static void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- struct CharacterMatrix matrix;
-
- matrix_clear(&matrix);
- matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
- switch (USB_DeviceState) {
- case DEVICE_STATE_Unattached:
- matrix_write_P(&matrix, PSTR("Unattached"));
- break;
- case DEVICE_STATE_Suspended:
- matrix_write_P(&matrix, PSTR("Suspended"));
- break;
- case DEVICE_STATE_Configured:
- matrix_write_P(&matrix, PSTR("Connected"));
- break;
- case DEVICE_STATE_Powered:
- matrix_write_P(&matrix, PSTR("Powered"));
- break;
- case DEVICE_STATE_Default:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case DEVICE_STATE_Addressed:
- matrix_write_P(&matrix, PSTR("Addressed"));
- break;
- default:
- matrix_write_P(&matrix, PSTR("Invalid"));
- }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
- char buf[40];
- snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
- matrix_write_P(&matrix, PSTR("\n\nLayer: "));
- switch (layer_state) {
- case _BASE:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case _RAISE:
- matrix_write_P(&matrix, PSTR("Raise"));
- break;
- case _LOWER:
- matrix_write_P(&matrix, PSTR("Lower"));
- break;
- case _ADJUST:
- matrix_write_P(&matrix, PSTR("ADJUST"));
- break;
- default:
- matrix_write(&matrix, buf);
- }
-
- // Host Keyboard LED Status
- char led[40];
- snprintf(led, sizeof(led), "\n%s %s %s",
- (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
- matrix_write(&matrix, led);
- matrix_update(&display, &matrix);
-}
-
-void iota_gfx_task(void) {
- render_status_info();
-
- if (display.dirty) {
- iota_gfx_flush();
- }
-
- if (timer_elapsed(last_flush) > ScreenOffInterval) {
- iota_gfx_off();
- }
-}
-#endif
+++ /dev/null
-#ifndef SSD1306_H
-#define SSD1306_H
-
-#include <stdbool.h>
-#include <stdio.h>
-
-bool iota_gfx_init(void);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-#endif
+++ /dev/null
-/*
- pins_arduino.h - Pin definition functions for Arduino
- Part of Arduino - http://www.arduino.cc/
-
- Copyright (c) 2007 David A. Mellis
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General
- Public License along with this library; if not, write to the
- Free Software Foundation, Inc., 59 Temple Place, Suite 330,
- Boston, MA 02111-1307 USA
-
- $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS 30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0 PORTD |= (1<<5)
-#define TXLED1 PORTD &= ~(1<<5)
-#define RXLED0 PORTB |= (1<<0)
-#define RXLED1 PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24; // D4
-static const uint8_t ADC7 = 25; // D6
-static const uint8_t ADC8 = 26; // D8
-static const uint8_t ADC9 = 27; // D9
-static const uint8_t ADC10 = 28; // D10
-static const uint8_t ADC11 = 29; // D12
-
-#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-// __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM). Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0 PD2 RXD1/INT2
-// D1 PD3 TXD1/INT3
-// D2 PD1 SDA SDA/INT1
-// D3# PD0 PWM8/SCL OC0B/SCL/INT0
-// D4 A6 PD4 ADC8
-// D5# PC6 ??? OC3A/#OC4A
-// D6# A7 PD7 FastPWM #OC4D/ADC10
-// D7 PE6 INT6/AIN0
-//
-// D8 A8 PB4 ADC11/PCINT4
-// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5
-// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6
-// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7
-// D12 A11 PD6 T1/#OC4D/ADC9
-// D13# PC7 PWM10 CLK0/OC4A
-//
-// A0 D18 PF7 ADC7
-// A1 D19 PF6 ADC6
-// A2 D20 PF5 ADC5
-// A3 D21 PF4 ADC4
-// A4 D22 PF1 ADC1
-// A5 D23 PF0 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO D14 PB3 MISO,PCINT3
-// SCK D15 PB1 SCK,PCINT1
-// MOSI D16 PB2 MOSI,PCINT2
-// SS D17 PB0 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED D24 PD5 XCK1
-// RXLED D17 PB0
-// HWB PE2 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &DDRB,
- (uint16_t) &DDRC,
- (uint16_t) &DDRD,
- (uint16_t) &DDRE,
- (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PORTB,
- (uint16_t) &PORTC,
- (uint16_t) &PORTD,
- (uint16_t) &PORTE,
- (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PINB,
- (uint16_t) &PINC,
- (uint16_t) &PIND,
- (uint16_t) &PINE,
- (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
- PD, // D0 - PD2
- PD, // D1 - PD3
- PD, // D2 - PD1
- PD, // D3 - PD0
- PD, // D4 - PD4
- PC, // D5 - PC6
- PD, // D6 - PD7
- PE, // D7 - PE6
-
- PB, // D8 - PB4
- PB, // D9 - PB5
- PB, // D10 - PB6
- PB, // D11 - PB7
- PD, // D12 - PD6
- PC, // D13 - PC7
-
- PB, // D14 - MISO - PB3
- PB, // D15 - SCK - PB1
- PB, // D16 - MOSI - PB2
- PB, // D17 - SS - PB0
-
- PF, // D18 - A0 - PF7
- PF, // D19 - A1 - PF6
- PF, // D20 - A2 - PF5
- PF, // D21 - A3 - PF4
- PF, // D22 - A4 - PF1
- PF, // D23 - A5 - PF0
-
- PD, // D24 - PD5
- PD, // D25 / D6 - A7 - PD7
- PB, // D26 / D8 - A8 - PB4
- PB, // D27 / D9 - A9 - PB5
- PB, // D28 / D10 - A10 - PB6
- PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
- _BV(2), // D0 - PD2
- _BV(3), // D1 - PD3
- _BV(1), // D2 - PD1
- _BV(0), // D3 - PD0
- _BV(4), // D4 - PD4
- _BV(6), // D5 - PC6
- _BV(7), // D6 - PD7
- _BV(6), // D7 - PE6
-
- _BV(4), // D8 - PB4
- _BV(5), // D9 - PB5
- _BV(6), // D10 - PB6
- _BV(7), // D11 - PB7
- _BV(6), // D12 - PD6
- _BV(7), // D13 - PC7
-
- _BV(3), // D14 - MISO - PB3
- _BV(1), // D15 - SCK - PB1
- _BV(2), // D16 - MOSI - PB2
- _BV(0), // D17 - SS - PB0
-
- _BV(7), // D18 - A0 - PF7
- _BV(6), // D19 - A1 - PF6
- _BV(5), // D20 - A2 - PF5
- _BV(4), // D21 - A3 - PF4
- _BV(1), // D22 - A4 - PF1
- _BV(0), // D23 - A5 - PF0
-
- _BV(5), // D24 - PD5
- _BV(7), // D25 / D6 - A7 - PD7
- _BV(4), // D26 / D8 - A8 - PB4
- _BV(5), // D27 / D9 - A9 - PB5
- _BV(6), // D28 / D10 - A10 - PB6
- _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- TIMER0B, /* 3 */
- NOT_ON_TIMER,
- TIMER3A, /* 5 */
- TIMER4D, /* 6 */
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- TIMER1A, /* 9 */
- TIMER1B, /* 10 */
- TIMER0A, /* 11 */
-
- NOT_ON_TIMER,
- TIMER4A, /* 13 */
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
- 7, // A0 PF7 ADC7
- 6, // A1 PF6 ADC6
- 5, // A2 PF5 ADC5
- 4, // A3 PF4 ADC4
- 1, // A4 PF1 ADC1
- 0, // A5 PF0 ADC0
- 8, // A6 D4 PD4 ADC8
- 10, // A7 D6 PD7 ADC10
- 11, // A8 D8 PB4 ADC11
- 12, // A9 D9 PB5 ADC12
- 13, // A10 D10 PB6 ADC13
- 9 // A11 D12 PD6 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
-// pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR Serial
-#define SERIAL_PORT_USBVIRTUAL Serial
-#define SERIAL_PORT_HARDWARE Serial1
-#define SERIAL_PORT_HARDWARE_OPEN Serial1
-
-#endif /* Pins_Arduino_h */
+++ /dev/null
-/*
- pins_arduino.h - Pin definition functions for Arduino
- Part of Arduino - http://www.arduino.cc/
-
- Copyright (c) 2007 David A. Mellis
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General
- Public License along with this library; if not, write to the
- Free Software Foundation, Inc., 59 Temple Place, Suite 330,
- Boston, MA 02111-1307 USA
-
- $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS 30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0 PORTD |= (1<<5)
-#define TXLED1 PORTD &= ~(1<<5)
-#define RXLED0 PORTB |= (1<<0)
-#define RXLED1 PORTB &= ~(1<<0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24; // D4
-static const uint8_t ADC7 = 25; // D6
-static const uint8_t ADC8 = 26; // D8
-static const uint8_t ADC9 = 27; // D9
-static const uint8_t ADC10 = 28; // D10
-static const uint8_t ADC11 = 29; // D12
-
-#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-// __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM). Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0 PD2 RXD1/INT2
-// D1 PD3 TXD1/INT3
-// D2 PD1 SDA SDA/INT1
-// D3# PD0 PWM8/SCL OC0B/SCL/INT0
-// D4 A6 PD4 ADC8
-// D5# PC6 ??? OC3A/#OC4A
-// D6# A7 PD7 FastPWM #OC4D/ADC10
-// D7 PE6 INT6/AIN0
-//
-// D8 A8 PB4 ADC11/PCINT4
-// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5
-// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6
-// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7
-// D12 A11 PD6 T1/#OC4D/ADC9
-// D13# PC7 PWM10 CLK0/OC4A
-//
-// A0 D18 PF7 ADC7
-// A1 D19 PF6 ADC6
-// A2 D20 PF5 ADC5
-// A3 D21 PF4 ADC4
-// A4 D22 PF1 ADC1
-// A5 D23 PF0 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO D14 PB3 MISO,PCINT3
-// SCK D15 PB1 SCK,PCINT1
-// MOSI D16 PB2 MOSI,PCINT2
-// SS D17 PB0 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED D24 PD5 XCK1
-// RXLED D17 PB0
-// HWB PE2 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &DDRB,
- (uint16_t) &DDRC,
- (uint16_t) &DDRD,
- (uint16_t) &DDRE,
- (uint16_t) &DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PORTB,
- (uint16_t) &PORTC,
- (uint16_t) &PORTD,
- (uint16_t) &PORTE,
- (uint16_t) &PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
- NOT_A_PORT,
- NOT_A_PORT,
- (uint16_t) &PINB,
- (uint16_t) &PINC,
- (uint16_t) &PIND,
- (uint16_t) &PINE,
- (uint16_t) &PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
- PD, // D0 - PD2
- PD, // D1 - PD3
- PD, // D2 - PD1
- PD, // D3 - PD0
- PD, // D4 - PD4
- PC, // D5 - PC6
- PD, // D6 - PD7
- PE, // D7 - PE6
-
- PB, // D8 - PB4
- PB, // D9 - PB5
- PB, // D10 - PB6
- PB, // D11 - PB7
- PD, // D12 - PD6
- PC, // D13 - PC7
-
- PB, // D14 - MISO - PB3
- PB, // D15 - SCK - PB1
- PB, // D16 - MOSI - PB2
- PB, // D17 - SS - PB0
-
- PF, // D18 - A0 - PF7
- PF, // D19 - A1 - PF6
- PF, // D20 - A2 - PF5
- PF, // D21 - A3 - PF4
- PF, // D22 - A4 - PF1
- PF, // D23 - A5 - PF0
-
- PD, // D24 - PD5
- PD, // D25 / D6 - A7 - PD7
- PB, // D26 / D8 - A8 - PB4
- PB, // D27 / D9 - A9 - PB5
- PB, // D28 / D10 - A10 - PB6
- PD, // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
- _BV(2), // D0 - PD2
- _BV(3), // D1 - PD3
- _BV(1), // D2 - PD1
- _BV(0), // D3 - PD0
- _BV(4), // D4 - PD4
- _BV(6), // D5 - PC6
- _BV(7), // D6 - PD7
- _BV(6), // D7 - PE6
-
- _BV(4), // D8 - PB4
- _BV(5), // D9 - PB5
- _BV(6), // D10 - PB6
- _BV(7), // D11 - PB7
- _BV(6), // D12 - PD6
- _BV(7), // D13 - PC7
-
- _BV(3), // D14 - MISO - PB3
- _BV(1), // D15 - SCK - PB1
- _BV(2), // D16 - MOSI - PB2
- _BV(0), // D17 - SS - PB0
-
- _BV(7), // D18 - A0 - PF7
- _BV(6), // D19 - A1 - PF6
- _BV(5), // D20 - A2 - PF5
- _BV(4), // D21 - A3 - PF4
- _BV(1), // D22 - A4 - PF1
- _BV(0), // D23 - A5 - PF0
-
- _BV(5), // D24 - PD5
- _BV(7), // D25 / D6 - A7 - PD7
- _BV(4), // D26 / D8 - A8 - PB4
- _BV(5), // D27 / D9 - A9 - PB5
- _BV(6), // D28 / D10 - A10 - PB6
- _BV(6), // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- TIMER0B, /* 3 */
- NOT_ON_TIMER,
- TIMER3A, /* 5 */
- TIMER4D, /* 6 */
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- TIMER1A, /* 9 */
- TIMER1B, /* 10 */
- TIMER0A, /* 11 */
-
- NOT_ON_TIMER,
- TIMER4A, /* 13 */
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
- NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
- 7, // A0 PF7 ADC7
- 6, // A1 PF6 ADC6
- 5, // A2 PF5 ADC5
- 4, // A3 PF4 ADC4
- 1, // A4 PF1 ADC1
- 0, // A5 PF0 ADC0
- 8, // A6 D4 PD4 ADC8
- 10, // A7 D6 PD7 ADC10
- 11, // A8 D8 PB4 ADC11
- 12, // A9 D9 PB5 ADC12
- 13, // A10 D10 PB6 ADC13
- 9 // A11 D12 PD6 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
-// pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR Serial
-#define SERIAL_PORT_USBVIRTUAL Serial
-#define SERIAL_PORT_HARDWARE Serial1
-#define SERIAL_PORT_HARDWARE_OPEN Serial1
-
-#endif /* Pins_Arduino_h */
+++ /dev/null
-#ifdef SSD1306OLED
-
-#include "ssd1306.h"
-#include "config.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "lets_split.h"
-#include "common/glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "pincontrol.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
-
-// Set this to 1 to help diagnose early startup problems
-// when testing power-on with ble. Turn it off otherwise,
-// as the latency of printing most of the debug info messes
-// with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
-
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
- uint8_t display[MatrixRows][MatrixCols];
- uint8_t *cursor;
- bool dirty;
-};
-
-static struct CharacterMatrix display;
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
-//#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
-static uint8_t displaying;
-#endif
-static uint16_t last_flush;
-
-enum ssd1306_cmds {
- DisplayOff = 0xAE,
- DisplayOn = 0xAF,
-
- SetContrast = 0x81,
- DisplayAllOnResume = 0xA4,
-
- DisplayAllOn = 0xA5,
- NormalDisplay = 0xA6,
- InvertDisplay = 0xA7,
- SetDisplayOffset = 0xD3,
- SetComPins = 0xda,
- SetVComDetect = 0xdb,
- SetDisplayClockDiv = 0xD5,
- SetPreCharge = 0xd9,
- SetMultiPlex = 0xa8,
- SetLowColumn = 0x00,
- SetHighColumn = 0x10,
- SetStartLine = 0x40,
-
- SetMemoryMode = 0x20,
- ColumnAddr = 0x21,
- PageAddr = 0x22,
-
- ComScanInc = 0xc0,
- ComScanDec = 0xc8,
- SegRemap = 0xa0,
- SetChargePump = 0x8d,
- ExternalVcc = 0x01,
- SwitchCapVcc = 0x02,
-
- ActivateScroll = 0x2f,
- DeActivateScroll = 0x2e,
- SetVerticalScrollArea = 0xa3,
- RightHorizontalScroll = 0x26,
- LeftHorizontalScroll = 0x27,
- VerticalAndRightHorizontalScroll = 0x29,
- VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
-// Write command sequence.
-// Returns true on success.
-static inline bool _send_cmd1(uint8_t cmd) {
- bool res = false;
-
- if (i2c_start_write(i2cAddress)) {
- xprintf("failed to start write to %d\n", i2cAddress);
- goto done;
- }
-
- if (i2c_master_write(0x0 /* command byte follows */)) {
- print("failed to write control byte\n");
-
- goto done;
- }
-
- if (i2c_master_write(cmd)) {
- xprintf("failed to write command %d\n", cmd);
- goto done;
- }
- res = true;
-done:
- i2c_master_stop();
- return res;
-}
-
-// Write 2-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- return _send_cmd1(opr);
-}
-
-// Write 3-byte command sequence.
-// Returns true on success
-static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
- if (!_send_cmd1(cmd)) {
- return false;
- }
- if (!_send_cmd1(opr1)) {
- return false;
- }
- return _send_cmd1(opr2);
-}
-
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
-
-static void matrix_clear(struct CharacterMatrix *matrix);
-
-static void clear_display(void) {
- matrix_clear(&display);
-
- // Clear all of the display bits (there can be random noise
- // in the RAM on startup)
- send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
- send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
- if (i2c_start_write(i2cAddress)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < DisplayWidth; ++col) {
- i2c_master_write(0);
- }
- }
-
- display.dirty = false;
-
-done:
- i2c_master_stop();
-}
-
-#if DEBUG_TO_SCREEN
-#undef sendchar
-static int8_t capture_sendchar(uint8_t c) {
- sendchar(c);
- iota_gfx_write_char(c);
-
- if (!displaying) {
- iota_gfx_flush();
- }
- return 0;
-}
-#endif
-
-bool iota_gfx_init(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- send_cmd2(SetDisplayClockDiv, 0x80);
- send_cmd2(SetMultiPlex, DisplayHeight - 1);
-
- send_cmd2(SetDisplayOffset, 0);
-
-
- send_cmd1(SetStartLine | 0x0);
- send_cmd2(SetChargePump, 0x14 /* Enable */);
- send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
-
-/// Flips the display orientation 0 degrees
- send_cmd1(SegRemap | 0x1);
- send_cmd1(ComScanDec);
-/*
-// the following Flip the display orientation 180 degrees
- send_cmd1(SegRemap);
- send_cmd1(ComScanInc);
-// end flip */
- send_cmd2(SetComPins, 0x2);
- send_cmd2(SetContrast, 0x8f);
- send_cmd2(SetPreCharge, 0xf1);
- send_cmd2(SetVComDetect, 0x40);
- send_cmd1(DisplayAllOnResume);
- send_cmd1(NormalDisplay);
- send_cmd1(DeActivateScroll);
- send_cmd1(DisplayOn);
-
- send_cmd2(SetContrast, 0); // Dim
-
- clear_display();
-
- success = true;
-
- iota_gfx_flush();
-
-#if DEBUG_TO_SCREEN
- print_set_sendchar(capture_sendchar);
-#endif
-
-done:
- return success;
-}
-
-bool iota_gfx_off(void) {
- bool success = false;
-
- send_cmd1(DisplayOff);
- success = true;
-
-done:
- return success;
-}
-
-bool iota_gfx_on(void) {
- bool success = false;
-
- send_cmd1(DisplayOn);
- success = true;
-
-done:
- return success;
-}
-
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
- *matrix->cursor = c;
- ++matrix->cursor;
-
- if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
- // We went off the end; scroll the display upwards by one line
- memmove(&matrix->display[0], &matrix->display[1],
- MatrixCols * (MatrixRows - 1));
- matrix->cursor = &matrix->display[MatrixRows - 1][0];
- memset(matrix->cursor, ' ', MatrixCols);
- }
-}
-
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
- matrix->dirty = true;
-
- if (c == '\n') {
- // Clear to end of line from the cursor and then move to the
- // start of the next line
- uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
-
- while (cursor_col++ < MatrixCols) {
- matrix_write_char_inner(matrix, ' ');
- }
- return;
- }
-
- matrix_write_char_inner(matrix, c);
-}
-
-void iota_gfx_write_char(uint8_t c) {
- matrix_write_char(&display, c);
-}
-
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
- const char *end = data + strlen(data);
- while (data < end) {
- matrix_write_char(matrix, *data);
- ++data;
- }
-}
-
-void iota_gfx_write(const char *data) {
- matrix_write(&display, data);
-}
-
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
- while (true) {
- uint8_t c = pgm_read_byte(data);
- if (c == 0) {
- return;
- }
- matrix_write_char(matrix, c);
- ++data;
- }
-}
-
-void iota_gfx_write_P(const char *data) {
- matrix_write_P(&display, data);
-}
-
-static void matrix_clear(struct CharacterMatrix *matrix) {
- memset(matrix->display, ' ', sizeof(matrix->display));
- matrix->cursor = &matrix->display[0][0];
- matrix->dirty = true;
-}
-
-void iota_gfx_clear_screen(void) {
- matrix_clear(&display);
-}
-
-static void matrix_render(struct CharacterMatrix *matrix) {
- last_flush = timer_read();
- iota_gfx_on();
-#if DEBUG_TO_SCREEN
- ++displaying;
-#endif
-
- // Move to the home position
- send_cmd3(PageAddr, 0, MatrixRows - 1);
- send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
- if (i2c_start_write(i2cAddress)) {
- goto done;
- }
- if (i2c_master_write(0x40)) {
- // Data mode
- goto done;
- }
-
- for (uint8_t row = 0; row < MatrixRows; ++row) {
- for (uint8_t col = 0; col < MatrixCols; ++col) {
- const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
- for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
- uint8_t colBits = pgm_read_byte(glyph + glyphCol);
- i2c_master_write(colBits);
- }
-
- // 1 column of space between chars (it's not included in the glyph)
- i2c_master_write(0);
- }
- }
-
- matrix->dirty = false;
-
-done:
- i2c_master_stop();
-#if DEBUG_TO_SCREEN
- --displaying;
-#endif
-}
-
-void iota_gfx_flush(void) {
- matrix_render(&display);
-}
-
-static void matrix_update(struct CharacterMatrix *dest,
- const struct CharacterMatrix *source) {
- if (memcmp(dest->display, source->display, sizeof(dest->display))) {
- memcpy(dest->display, source->display, sizeof(dest->display));
- dest->dirty = true;
- }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
- if (debug_enable) {
- return;
- }
-#endif
-
- struct CharacterMatrix matrix;
-
- matrix_clear(&matrix);
- matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
- switch (USB_DeviceState) {
- case DEVICE_STATE_Unattached:
- matrix_write_P(&matrix, PSTR("Unattached"));
- break;
- case DEVICE_STATE_Suspended:
- matrix_write_P(&matrix, PSTR("Suspended"));
- break;
- case DEVICE_STATE_Configured:
- matrix_write_P(&matrix, PSTR("Connected"));
- break;
- case DEVICE_STATE_Powered:
- matrix_write_P(&matrix, PSTR("Powered"));
- break;
- case DEVICE_STATE_Default:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case DEVICE_STATE_Addressed:
- matrix_write_P(&matrix, PSTR("Addressed"));
- break;
- default:
- matrix_write_P(&matrix, PSTR("Invalid"));
- }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
- char buf[40];
- snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
- matrix_write_P(&matrix, PSTR("\n\nLayer: "));
- switch (layer_state) {
- case _BASE:
- matrix_write_P(&matrix, PSTR("Default"));
- break;
- case _RAISE:
- matrix_write_P(&matrix, PSTR("Raise"));
- break;
- case _LOWER:
- matrix_write_P(&matrix, PSTR("Lower"));
- break;
- case _ADJUST:
- matrix_write_P(&matrix, PSTR("ADJUST"));
- break;
- default:
- matrix_write(&matrix, buf);
- }
-
- // Host Keyboard LED Status
- char led[40];
- snprintf(led, sizeof(led), "\n%s %s %s",
- (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
- (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
- (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
- matrix_write(&matrix, led);
- matrix_update(&display, &matrix);
-}
-
-void iota_gfx_task(void) {
- render_status_info();
-
- if (display.dirty) {
- iota_gfx_flush();
- }
-
- if (timer_elapsed(last_flush) > ScreenOffInterval) {
- iota_gfx_off();
- }
-}
-#endif
+++ /dev/null
-#ifndef SSD1306_H
-#define SSD1306_H
-
-#include <stdbool.h>
-#include <stdio.h>
-
-bool iota_gfx_init(void);
-void iota_gfx_task(void);
-bool iota_gfx_off(void);
-bool iota_gfx_on(void);
-void iota_gfx_flush(void);
-void iota_gfx_write_char(uint8_t c);
-void iota_gfx_write(const char *data);
-void iota_gfx_write_P(const char *data);
-void iota_gfx_clear_screen(void);
-
-#endif
+++ /dev/null
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
- led_keyframe_enable(animation, state);
-#endif
- return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
- led_keyframe_disable(animation, state);
-#endif
- return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
- bool ret = false;
-#ifdef BACKLIGHT_ENABLE
- ret |= led_keyframe_fade_in_all(animation, state);
-#endif
- return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
- bool ret = false;
-#ifdef BACKLIGHT_ENABLE
- ret |= led_keyframe_fade_out_all(animation, state);
-#endif
- return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
- .num_frames = 2,
- .loop = false,
- .frame_lengths = {0, gfxMillisecondsToTicks(5000)},
- .frame_functions = {
- keyframe_enable,
- keyframe_fade_in,
- },
-};
-
-keyframe_animation_t default_suspend_animation = {
- .num_frames = 2,
- .loop = false,
- .frame_lengths = {gfxMillisecondsToTicks(1000), 0},
- .frame_functions = {
- keyframe_fade_out,
- keyframe_disable,
- },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
- .num_frames = 14,
- .loop = true,
- .frame_lengths = {
- gfxMillisecondsToTicks(1000), // fade in
- gfxMillisecondsToTicks(1000), // no op (leds on)
- gfxMillisecondsToTicks(1000), // fade out
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
- 0, // mirror leds
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
- gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
- 0, // normal leds
- gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
- },
- .frame_functions = {
- led_keyframe_fade_in_all,
- keyframe_no_operation,
- led_keyframe_fade_out_all,
- led_keyframe_crossfade,
- led_keyframe_left_to_right_gradient,
- led_keyframe_crossfade,
- led_keyframe_top_to_bottom_gradient,
- led_keyframe_mirror_orientation,
- led_keyframe_crossfade,
- led_keyframe_left_to_right_gradient,
- led_keyframe_crossfade,
- led_keyframe_top_to_bottom_gradient,
- led_keyframe_normal_orientation,
- led_keyframe_crossfade,
- },
-};
-#endif
-
-#endif
+++ /dev/null
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_
-
-#include "visualizer.h"
-
-// You can use these default animations, but of course you can also write your own custom ones instead
-extern keyframe_animation_t default_startup_animation;
-extern keyframe_animation_t default_suspend_animation;
-
-// An animation for testing and demonstrating the led support, should probably not be used for real world
-// cases
-extern keyframe_animation_t led_test_animation;
-
-#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */
--- /dev/null
+/*
+Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+ 400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+ 0xFF, 0x00, /* C1-1 -> C1-16 */
+ 0xFF, 0x00, /* C2-1 -> C2-16 */
+ 0xFF, 0x00, /* C3-1 -> C3-16 */
+ 0xFF, 0x00, /* C4-1 -> C4-16 */
+ 0xFF, 0x00, /* C5-1 -> C5-16 */
+ 0xFF, 0x00, /* C6-1 -> C6-16 */
+ 0xFF, 0x00, /* C7-1 -> C7-16 */
+ 0xFF, 0x00, /* C8-1 -> C8-16 */
+ 0xFE, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
+// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
+// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
+ { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
+// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
+ { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
+// 62 63 64 65 66 67 68 69 70 71
+ { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+ (void) g;
+ /* I2C pins */
+ palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+ palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+ palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+ palClearPad(GPIOB, 16);
+ /* start I2C */
+ i2cStart(&I2CD1, &i2ccfg);
+ // try high drive (from kiibohd)
+ I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+ // try glitch fixing (from kiibohd)
+ I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+ (void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+ (void) g;
+ return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+ (void) g;
+ return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+ (void) g;
+ if(!shutdown) {
+ palSetPad(GPIOB, 16);
+ }
+ else {
+ palClearPad(GPIOB, 16);
+ }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+ (void) g;
+ i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-#endif
-
-// The visualizer needs gfx thread priorities
-#define LED_DISPLAY_NUMBER 0
-
-#define LED_NUM_ROWS 5
-#define LED_NUM_COLS 16
-
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
+#endif
\ No newline at end of file
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-static const I2CConfig i2ccfg = {
- 400000 // clock speed (Hz); 400kHz max for IS31
-};
-
-#define GDISP_SCREEN_WIDTH 16
-#define GDISP_SCREEN_HEIGHT 5
-
-static const uint8_t led_mask[] = {
- 0xFF, 0x00, /* C1-1 -> C1-16 */
- 0xFF, 0x00, /* C2-1 -> C2-16 */
- 0xFF, 0x00, /* C3-1 -> C3-16 */
- 0xFF, 0x00, /* C4-1 -> C4-16 */
- 0xFF, 0x00, /* C5-1 -> C5-16 */
- 0xFF, 0x00, /* C6-1 -> C6-16 */
- 0xFF, 0x00, /* C7-1 -> C7-16 */
- 0xFF, 0x00, /* C8-1 -> C8-16 */
- 0xFE, 0x00, /* C9-1 -> C9-16 */
-};
-
-// The address of the LED
-#define LA(c, r) (c + r * 16 )
-// Need to be an address that is not mapped, but inside the range of the controller matrix
-#define NA LA(8, 8)
-
-// The numbers in the comments are the led numbers DXX on the PCB
-// The mapping is taken from the schematic of left hand side
-static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
-// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
- { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
-// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
- { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
-// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
- { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
-// 62 63 64 65 66 67 68 69 70 71
- { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
-};
-
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
-#define IS31_TIMEOUT 5000
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- /* I2C pins */
- palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
- palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
- palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
- palClearPad(GPIOB, 16);
- /* start I2C */
- i2cStart(&I2CD1, &i2ccfg);
- // try high drive (from kiibohd)
- I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
- // try glitch fixing (from kiibohd)
- I2CD1.i2c->FLT = 4;
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
- (void) g;
- return led_mask;
-}
-
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
- (void) g;
- return led_mapping[y][x];
-}
-
-static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
- (void) g;
- if(!shutdown) {
- palSetPad(GPIOB, 16);
- }
- else {
- palClearPad(GPIOB, 16);
- }
-}
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
+++ /dev/null
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_WHITEFOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
- #define GDISP_SCREEN_HEIGHT 9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
- #define GDISP_SCREEN_WIDTH 16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
- #define GDISP_INITIAL_CONTRAST 0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
- #define GDISP_INITIAL_BACKLIGHT 0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG 0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-typedef struct{
- uint8_t write_buffer_offset;
- uint8_t write_buffer[IS31_FRAME_SIZE];
- uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
- uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g) ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
- uint8_t tx[2] __attribute__((aligned(2)));
- tx[0] = IS31_COMMANDREGISTER;
- tx[1] = page;
- write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
- uint8_t tx[2] __attribute__((aligned(2)));
- tx[0] = reg;
- tx[1] = data;
- write_page(g, page);
- write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
- PRIV(g)->write_buffer_offset = offset;
- write_page(g, page);
- write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(sizeof(PrivData));
- __builtin_memset(PRIV(g), 0, sizeof(PrivData));
- PRIV(g)->page = 0;
-
- // Initialise the board interface
- init_board(g);
- gfxSleepMilliseconds(10);
-
- // zero function page, all registers (assuming full_page is all zeroes)
- write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
- set_hardware_shutdown(g, false);
- gfxSleepMilliseconds(10);
- // software shutdown
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- gfxSleepMilliseconds(10);
- // zero function page, all registers
- write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
- gfxSleepMilliseconds(10);
-
-
- // zero all LED registers on all 8 pages, and enable the mask
- __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
- for(uint8_t i=0; i<8; i++) {
- write_ram(g, i, 0, IS31_FRAME_SIZE);
- gfxSleepMilliseconds(1);
- }
-
- // software shutdown disable (i.e. turn stuff on)
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- gfxSleepMilliseconds(10);
-
- // Finish Init
- post_init_board(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOff;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
- LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH))
- return;
-
- PRIV(g)->page++;
- PRIV(g)->page %= 2;
- // TODO: some smarter algorithm for this
- // We should run only one physical page at a time
- // This way we don't need to send so much data, and
- // we could use slightly less memory
- uint8_t* src = PRIV(g)->frame_buffer;
- for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
- for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
- uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
- PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
- ++src;
- }
- }
- write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
- gfxSleepMilliseconds(1);
- write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
- }
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
- LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = g->p.y;
- break;
- }
- PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
- g->flags |= GDISP_FLG_NEEDFLUSH;
- }
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
- LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = g->p.y;
- break;
- }
- return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
- }
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
- LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch(g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr)
- return;
- switch((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
- break;
- case powerOn:
- write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr)
- return;
- switch((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_BACKLIGHT:
- if (g->g.Backlight == (unsigned)g->p.ptr)
- return;
- unsigned val = (unsigned)g->p.ptr;
- g->g.Backlight = val > 100 ? 100 : val;
- g->flags |= GDISP_FLG_NEEDFLUSH;
- return;
- }
- }
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
+++ /dev/null
-/*
-Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-
-#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
#ifndef _GFXCONF_H
#define _GFXCONF_H
-
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS TRUE
-//#define GFX_USE_OS_FREERTOS FALSE
-// #define GFX_FREERTOS_USE_TRACE FALSE
-//#define GFX_USE_OS_WIN32 FALSE
-//#define GFX_USE_OS_LINUX FALSE
-//#define GFX_USE_OS_OSX FALSE
-//#define GFX_USE_OS_ECOS FALSE
-//#define GFX_USE_OS_RAWRTOS FALSE
-//#define GFX_USE_OS_ARDUINO FALSE
-//#define GFX_USE_OS_KEIL FALSE
-//#define GFX_USE_OS_CMSIS FALSE
-//#define GFX_USE_OS_RAW32 FALSE
-// #define INTERRUPTS_OFF() optional_code
-// #define INTERRUPTS_ON() optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS FALSE
-#define GOS_NEED_X_HEAP FALSE
-
-// Options that (should where relevant) apply to all operating systems
- #define GFX_NO_INLINE FALSE
-// #define GFX_COMPILER GFX_COMPILER_UNKNOWN
-// #define GFX_CPU GFX_CPU_UNKNOWN
-// #define GFX_OS_HEAP_SIZE 0
-// #define GFX_OS_NO_INIT FALSE
-// #define GFX_OS_INIT_NO_WARNING FALSE
-// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine
-// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine
-// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP TRUE
-
-//#define GDISP_NEED_AUTOFLUSH FALSE
-//#define GDISP_NEED_TIMERFLUSH FALSE
-//#define GDISP_NEED_VALIDATION TRUE
-//#define GDISP_NEED_CLIP TRUE
-#define GDISP_NEED_CIRCLE TRUE
-#define GDISP_NEED_ELLIPSE TRUE
-#define GDISP_NEED_ARC TRUE
-#define GDISP_NEED_ARCSECTORS TRUE
-#define GDISP_NEED_CONVEX_POLYGON TRUE
-//#define GDISP_NEED_SCROLL FALSE
-#define GDISP_NEED_PIXELREAD TRUE
-#define GDISP_NEED_CONTROL TRUE
-//#define GDISP_NEED_QUERY FALSE
-//#define GDISP_NEED_MULTITHREAD FALSE
-//#define GDISP_NEED_STREAMING FALSE
-#define GDISP_NEED_TEXT TRUE
-// #define GDISP_NEED_TEXT_WORDWRAP FALSE
-// #define GDISP_NEED_ANTIALIAS FALSE
-// #define GDISP_NEED_UTF8 FALSE
- #define GDISP_NEED_TEXT_KERNING TRUE
-// #define GDISP_INCLUDE_FONT_UI1 FALSE
-// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font.
-// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE
- #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE
-// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE
-// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE
- #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE
-// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE
-// #define GDISP_INCLUDE_USER_FONTS FALSE
-
-//#define GDISP_NEED_IMAGE FALSE
-// #define GDISP_NEED_IMAGE_NATIVE FALSE
-// #define GDISP_NEED_IMAGE_GIF FALSE
-// #define GDISP_NEED_IMAGE_BMP FALSE
-// #define GDISP_NEED_IMAGE_BMP_1 FALSE
-// #define GDISP_NEED_IMAGE_BMP_4 FALSE
-// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE
-// #define GDISP_NEED_IMAGE_BMP_8 FALSE
-// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE
-// #define GDISP_NEED_IMAGE_BMP_16 FALSE
-// #define GDISP_NEED_IMAGE_BMP_24 FALSE
-// #define GDISP_NEED_IMAGE_BMP_32 FALSE
-// #define GDISP_NEED_IMAGE_JPG FALSE
-// #define GDISP_NEED_IMAGE_PNG FALSE
-// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP TRUE
-#endif
-// #define GDISP_NEED_PIXMAP_IMAGE FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE 128
-//#define GDISP_STARTUP_COLOR Black
-#define GDISP_NEED_STARTUP_LOGO FALSE
-
-//#define GDISP_TOTAL_DISPLAYS 2
-
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_WHITEFOX
-#endif
-
- #ifdef GDISP_DRIVER_LIST
- // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
- #define GDISP_HARDWARE_STREAM_WRITE FALSE
- #define GDISP_HARDWARE_STREAM_READ FALSE
- #define GDISP_HARDWARE_STREAM_POS FALSE
- #define GDISP_HARDWARE_DRAWPIXEL TRUE
- #define GDISP_HARDWARE_CLEARS FALSE
- #define GDISP_HARDWARE_FILLS FALSE
- //#define GDISP_HARDWARE_BITFILLS FALSE
- #define GDISP_HARDWARE_SCROLL FALSE
- #define GDISP_HARDWARE_PIXELREAD TRUE
- #define GDISP_HARDWARE_CONTROL TRUE
- #define GDISP_HARDWARE_QUERY FALSE
- #define GDISP_HARDWARE_CLIP FALSE
-
- #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888
- #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET FALSE
-// #define GDISP_GFXNET_PORT 13001
-// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE
-// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE
-// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER FALSE
-// #define GWIN_REDRAW_IMMEDIATE FALSE
-// #define GWIN_REDRAW_SINGLEOP FALSE
-// #define GWIN_NEED_FLASHING FALSE
-// #define GWIN_FLASHING_PERIOD 250
-
-//#define GWIN_NEED_CONSOLE FALSE
-// #define GWIN_CONSOLE_USE_HISTORY FALSE
-// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE
-// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE
-// #define GWIN_CONSOLE_ESCSEQ FALSE
-// #define GWIN_CONSOLE_USE_BASESTREAM FALSE
-// #define GWIN_CONSOLE_USE_FLOAT FALSE
-//#define GWIN_NEED_GRAPH FALSE
-//#define GWIN_NEED_GL3D FALSE
-
-//#define GWIN_NEED_WIDGET FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1
-// #define GWIN_NEED_LABEL FALSE
-// #define GWIN_LABEL_ATTRIBUTE FALSE
-// #define GWIN_NEED_BUTTON FALSE
-// #define GWIN_BUTTON_LAZY_RELEASE FALSE
-// #define GWIN_NEED_SLIDER FALSE
-// #define GWIN_SLIDER_NOSNAP FALSE
-// #define GWIN_SLIDER_DEAD_BAND 5
-// #define GWIN_SLIDER_TOGGLE_INC 20
-// #define GWIN_NEED_CHECKBOX FALSE
-// #define GWIN_NEED_IMAGE FALSE
-// #define GWIN_NEED_IMAGE_ANIMATION FALSE
-// #define GWIN_NEED_RADIO FALSE
-// #define GWIN_NEED_LIST FALSE
-// #define GWIN_NEED_LIST_IMAGES FALSE
-// #define GWIN_NEED_PROGRESSBAR FALSE
-// #define GWIN_PROGRESSBAR_AUTO FALSE
-// #define GWIN_NEED_KEYBOARD FALSE
-// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1
-// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE
-// #define GWIN_NEED_TEXTEDIT FALSE
-// #define GWIN_FLAT_STYLING FALSE
-// #define GWIN_WIDGET_TAGS FALSE
-
-//#define GWIN_NEED_CONTAINERS FALSE
-// #define GWIN_NEED_CONTAINER FALSE
-// #define GWIN_NEED_FRAME FALSE
-// #define GWIN_NEED_TABSET FALSE
-// #define GWIN_TABSET_TABHEIGHT 18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE FALSE
-//#define GEVENT_MAXIMUM_SIZE 32
-//#define GEVENT_MAX_SOURCE_LISTENERS 32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER FALSE
-
-//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE 2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE FALSE
-
-//#define GQUEUE_NEED_ASYNC FALSE
-//#define GQUEUE_NEED_GSYNC FALSE
-//#define GQUEUE_NEED_FSYNC FALSE
-//#define GQUEUE_NEED_BUFFERS FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT FALSE
-
-//#define GINPUT_NEED_MOUSE FALSE
-// #define GINPUT_TOUCH_STARTRAW FALSE
-// #define GINPUT_TOUCH_NOTOUCH FALSE
-// #define GINPUT_TOUCH_NOCALIBRATE FALSE
-// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE
-// #define GINPUT_MOUSE_POLL_PERIOD 25
-// #define GINPUT_MOUSE_CLICK_TIME 300
-// #define GINPUT_TOUCH_CXTCLICK_TIME 700
-// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE
-// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE
-// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD FALSE
-// #define GINPUT_KEYBOARD_POLL_PERIOD 200
-// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-// #define GKEYBOARD_LAYOUT_OFF FALSE
-// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE
-//#define GINPUT_NEED_TOGGLE FALSE
-//#define GINPUT_NEED_DIAL FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE FALSE
-
-//#define GFILE_NEED_PRINTG FALSE
-//#define GFILE_NEED_SCANG FALSE
-//#define GFILE_NEED_STRINGS FALSE
-//#define GFILE_NEED_FILELISTS FALSE
-//#define GFILE_NEED_STDIO FALSE
-//#define GFILE_NEED_NOAUTOMOUNT FALSE
-//#define GFILE_NEED_NOAUTOSYNC FALSE
-
-//#define GFILE_NEED_MEMFS FALSE
-//#define GFILE_NEED_ROMFS FALSE
-//#define GFILE_NEED_RAMFS FALSE
-//#define GFILE_NEED_FATFS FALSE
-//#define GFILE_NEED_NATIVEFS FALSE
-//#define GFILE_NEED_CHBIOSFS FALSE
-
-//#define GFILE_ALLOW_FLOATS FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC FALSE
-//#define GFILE_MAX_GFILES 3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES 4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN GFX_USE_GAUDIO
-// #define GAUDIO_NEED_PLAY FALSE
-// #define GAUDIO_NEED_RECORD FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC TRUE
-
-//#define GMISC_NEED_ARRAYOPS FALSE
-//#define GMISC_NEED_FASTTRIG FALSE
-//#define GMISC_NEED_FIXEDTRIG FALSE
-//#define GMISC_NEED_INVSQRT FALSE
-// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE
-// #define GMISC_INVSQRT_REAL_SLOW FALSE
-#define GMISC_NEED_MATRIXFLOAT2D TRUE
-#define GMISC_NEED_MATRIXFIXED2D FALSE
+#include "common_gfxconf.h"
#endif /* _GFXCONF_H */
# project specific files
SRC = matrix.c \
- led.c \
- animations.c
+ led.c
## chip/board settings
# - the next two should match the directories in
BACKLIGHT_ENABLE = yes
VISUALIZER_ENABLE = yes
-include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 16
+LED_HEIGHT = 5
\ No newline at end of file
#include "visualizer.h"
#include "visualizer_keyframes.h"
#include "led.h"
-#include "animations.h"
+#include "default_animations.h"
static bool initial_update = true;
--- /dev/null
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
+#define QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
+
+#include "visualizer.h"
+
+// Animates the LCD backlight color between the current color and the target color (of the state)
+bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state);
+// Sets the backlight color to the target color
+bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state);
+
+bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
+bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
+
+#endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */
+++ /dev/null
-/* Copyright 2015 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-// Simple analog to digitial conversion
-
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <stdint.h>
-#include "analog.h"
-
-
-static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
-
-
-void analogReference(uint8_t mode)
-{
- aref = mode & 0xC0;
-}
-
-
-// Arduino compatible pin input
-int16_t analogRead(uint8_t pin)
-{
-#if defined(__AVR_ATmega32U4__)
- static const uint8_t PROGMEM pin_to_mux[] = {
- 0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
- 0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
- if (pin >= 12) return 0;
- return adc_read(pgm_read_byte(pin_to_mux + pin));
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
- if (pin >= 8) return 0;
- return adc_read(pin);
-#else
- return 0;
-#endif
-}
-
-// Mux input
-int16_t adc_read(uint8_t mux)
-{
-#if defined(__AVR_AT90USB162__)
- return 0;
-#else
- uint8_t low;
-
- ADCSRA = (1<<ADEN) | ADC_PRESCALER; // enable ADC
- ADCSRB = (1<<ADHSM) | (mux & 0x20); // high speed mode
- ADMUX = aref | (mux & 0x1F); // configure mux input
- ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC); // start the conversion
- while (ADCSRA & (1<<ADSC)) ; // wait for result
- low = ADCL; // must read LSB first
- return (ADCH << 8) | low; // must read MSB only once!
-#endif
-}
-
-
+++ /dev/null
-/* Copyright 2015 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _analog_h_included__
-#define _analog_h_included__
-
-#include <stdint.h>
-
-void analogReference(uint8_t mode);
-int16_t analogRead(uint8_t pin);
-int16_t adc_read(uint8_t mux);
-
-#define ADC_REF_POWER (1<<REFS0)
-#define ADC_REF_INTERNAL ((1<<REFS1) | (1<<REFS0))
-#define ADC_REF_EXTERNAL (0)
-
-// These prescaler values are for high speed mode, ADHSM = 1
-#if F_CPU == 16000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
-#elif F_CPU == 8000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
-#elif F_CPU == 4000000L
-#define ADC_PRESCALER ((1<<ADPS2))
-#elif F_CPU == 2000000L
-#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
-#elif F_CPU == 1000000L
-#define ADC_PRESCALER ((1<<ADPS1))
-#else
-#define ADC_PRESCALER ((1<<ADPS0))
-#endif
-
-// some avr-libc versions do not properly define ADHSM
-#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-#if !defined(ADHSM)
-#define ADHSM (7)
-#endif
-#endif
-
-#endif
+++ /dev/null
-/*
-* light weight WS2812 lib V2.0b
-*
-* Controls WS2811/WS2812/WS2812B RGB-LEDs
-* Author: Tim (cpldcpu@gmail.com)
-*
-* Jan 18th, 2014 v2.0b Initial Version
-* Nov 29th, 2015 v2.3 Added SK6812RGBW support
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "light_ws2812.h"
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "debug.h"
-
-#ifdef RGBW_BB_TWI
-
-// Port for the I2C
-#define I2C_DDR DDRD
-#define I2C_PIN PIND
-#define I2C_PORT PORTD
-
-// Pins to be used in the bit banging
-#define I2C_CLK 0
-#define I2C_DAT 1
-
-#define I2C_DATA_HI()\
-I2C_DDR &= ~ (1 << I2C_DAT);\
-I2C_PORT |= (1 << I2C_DAT);
-#define I2C_DATA_LO()\
-I2C_DDR |= (1 << I2C_DAT);\
-I2C_PORT &= ~ (1 << I2C_DAT);
-
-#define I2C_CLOCK_HI()\
-I2C_DDR &= ~ (1 << I2C_CLK);\
-I2C_PORT |= (1 << I2C_CLK);
-#define I2C_CLOCK_LO()\
-I2C_DDR |= (1 << I2C_CLK);\
-I2C_PORT &= ~ (1 << I2C_CLK);
-
-#define I2C_DELAY 1
-
-void I2C_WriteBit(unsigned char c)
-{
- if (c > 0)
- {
- I2C_DATA_HI();
- }
- else
- {
- I2C_DATA_LO();
- }
-
- I2C_CLOCK_HI();
- _delay_us(I2C_DELAY);
-
- I2C_CLOCK_LO();
- _delay_us(I2C_DELAY);
-
- if (c > 0)
- {
- I2C_DATA_LO();
- }
-
- _delay_us(I2C_DELAY);
-}
-
-// Inits bitbanging port, must be called before using the functions below
-//
-void I2C_Init(void)
-{
- I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
-
- I2C_CLOCK_HI();
- I2C_DATA_HI();
-
- _delay_us(I2C_DELAY);
-}
-
-// Send a START Condition
-//
-void I2C_Start(void)
-{
- // set both to high at the same time
- I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
- _delay_us(I2C_DELAY);
-
- I2C_DATA_LO();
- _delay_us(I2C_DELAY);
-
- I2C_CLOCK_LO();
- _delay_us(I2C_DELAY);
-}
-
-// Send a STOP Condition
-//
-void I2C_Stop(void)
-{
- I2C_CLOCK_HI();
- _delay_us(I2C_DELAY);
-
- I2C_DATA_HI();
- _delay_us(I2C_DELAY);
-}
-
-// write a byte to the I2C slave device
-//
-unsigned char I2C_Write(unsigned char c)
-{
- for (char i = 0; i < 8; i++)
- {
- I2C_WriteBit(c & 128);
-
- c <<= 1;
- }
-
-
- I2C_WriteBit(0);
- _delay_us(I2C_DELAY);
- _delay_us(I2C_DELAY);
-
- // _delay_us(I2C_DELAY);
- //return I2C_ReadBit();
- return 0;
-}
-
-
-#endif
-
-// Setleds for standard RGB
-void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
-{
- // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
- ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
-}
-
-void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask)
-{
- // ws2812_DDRREG |= pinmask; // Enable DDR
- // new universal format (DDR)
- _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
-
- ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
- _delay_us(50);
-}
-
-// Setleds for SK6812RGBW
-void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds)
-{
-
- #ifdef RGBW_BB_TWI
- uint8_t sreg_prev, twcr_prev;
- sreg_prev=SREG;
- twcr_prev=TWCR;
- cli();
- TWCR &= ~(1<<TWEN);
- I2C_Init();
- I2C_Start();
- I2C_Write(0x84);
- uint16_t datlen = leds<<2;
- uint8_t curbyte;
- uint8_t * data = (uint8_t*)ledarray;
- while (datlen--) {
- curbyte=*data++;
- I2C_Write(curbyte);
- }
- I2C_Stop();
- SREG=sreg_prev;
- TWCR=twcr_prev;
- #endif
-
-
- // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
- // new universal format (DDR)
- _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
-
- ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
-
-
- #ifndef RGBW_BB_TWI
- _delay_us(80);
- #endif
-}
-
-void ws2812_sendarray(uint8_t *data,uint16_t datlen)
-{
- ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
-}
-
-/*
- This routine writes an array of bytes with RGB values to the Dataout pin
- using the fast 800kHz clockless WS2811/2812 protocol.
-*/
-
-// Timing in ns
-#define w_zeropulse 350
-#define w_onepulse 900
-#define w_totalperiod 1250
-
-// Fixed cycles used by the inner loop
-#define w_fixedlow 2
-#define w_fixedhigh 4
-#define w_fixedtotal 8
-
-// Insert NOPs to match the timing, if possible
-#define w_zerocycles (((F_CPU/1000)*w_zeropulse )/1000000)
-#define w_onecycles (((F_CPU/1000)*w_onepulse +500000)/1000000)
-#define w_totalcycles (((F_CPU/1000)*w_totalperiod +500000)/1000000)
-
-// w1 - nops between rising edge and falling edge - low
-#define w1 (w_zerocycles-w_fixedlow)
-// w2 nops between fe low and fe high
-#define w2 (w_onecycles-w_fixedhigh-w1)
-// w3 nops to complete loop
-#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
-
-#if w1>0
- #define w1_nops w1
-#else
- #define w1_nops 0
-#endif
-
-// The only critical timing parameter is the minimum pulse length of the "0"
-// Warn or throw error if this timing can not be met with current F_CPU settings.
-#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
-#if w_lowtime>550
- #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
-#elif w_lowtime>450
- #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
- #warning "Please consider a higher clockspeed, if possible"
-#endif
-
-#if w2>0
-#define w2_nops w2
-#else
-#define w2_nops 0
-#endif
-
-#if w3>0
-#define w3_nops w3
-#else
-#define w3_nops 0
-#endif
-
-#define w_nop1 "nop \n\t"
-#define w_nop2 "rjmp .+0 \n\t"
-#define w_nop4 w_nop2 w_nop2
-#define w_nop8 w_nop4 w_nop4
-#define w_nop16 w_nop8 w_nop8
-
-void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
-{
- uint8_t curbyte,ctr,masklo;
- uint8_t sreg_prev;
-
- // masklo =~maskhi&ws2812_PORTREG;
- // maskhi |= ws2812_PORTREG;
- masklo =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
- maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2);
- sreg_prev=SREG;
- cli();
-
- while (datlen--) {
- curbyte=(*data++);
-
- asm volatile(
- " ldi %0,8 \n\t"
- "loop%=: \n\t"
- " out %2,%3 \n\t" // '1' [01] '0' [01] - re
-#if (w1_nops&1)
-w_nop1
-#endif
-#if (w1_nops&2)
-w_nop2
-#endif
-#if (w1_nops&4)
-w_nop4
-#endif
-#if (w1_nops&8)
-w_nop8
-#endif
-#if (w1_nops&16)
-w_nop16
-#endif
- " sbrs %1,7 \n\t" // '1' [03] '0' [02]
- " out %2,%4 \n\t" // '1' [--] '0' [03] - fe-low
- " lsl %1 \n\t" // '1' [04] '0' [04]
-#if (w2_nops&1)
- w_nop1
-#endif
-#if (w2_nops&2)
- w_nop2
-#endif
-#if (w2_nops&4)
- w_nop4
-#endif
-#if (w2_nops&8)
- w_nop8
-#endif
-#if (w2_nops&16)
- w_nop16
-#endif
- " out %2,%4 \n\t" // '1' [+1] '0' [+1] - fe-high
-#if (w3_nops&1)
-w_nop1
-#endif
-#if (w3_nops&2)
-w_nop2
-#endif
-#if (w3_nops&4)
-w_nop4
-#endif
-#if (w3_nops&8)
-w_nop8
-#endif
-#if (w3_nops&16)
-w_nop16
-#endif
-
- " dec %0 \n\t" // '1' [+2] '0' [+2]
- " brne loop%=\n\t" // '1' [+3] '0' [+4]
- : "=&d" (ctr)
- : "r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
- );
- }
-
- SREG=sreg_prev;
-}
+++ /dev/null
-/*
- * light weight WS2812 lib include
- *
- * Version 2.3 - Nev 29th 2015
- * Author: Tim (cpldcpu@gmail.com)
- *
- * Please do not change this file! All configuration is handled in "ws2812_config.h"
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef LIGHT_WS2812_H_
-#define LIGHT_WS2812_H_
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-//#include "ws2812_config.h"
-//#include "i2cmaster.h"
-
-#ifdef RGBW
- #define LED_TYPE struct cRGBW
-#else
- #define LED_TYPE struct cRGB
-#endif
-
-
-/*
- * Structure of the LED array
- *
- * cRGB: RGB for WS2812S/B/C/D, SK6812, SK6812Mini, SK6812WWA, APA104, APA106
- * cRGBW: RGBW for SK6812RGBW
- */
-
-struct cRGB { uint8_t g; uint8_t r; uint8_t b; };
-struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;};
-
-
-
-/* User Interface
- *
- * Input:
- * ledarray: An array of GRB data describing the LED colors
- * number_of_leds: The number of LEDs to write
- * pinmask (optional): Bitmask describing the output bin. e.g. _BV(PB0)
- *
- * The functions will perform the following actions:
- * - Set the data-out pin as output
- * - Send out the LED data
- * - Wait 50�s to reset the LEDs
- */
-
-void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
-void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
-
-/*
- * Old interface / Internal functions
- *
- * The functions take a byte-array and send to the data output as WS2812 bitstream.
- * The length is the number of bytes to send - three per LED.
- */
-
-void ws2812_sendarray (uint8_t *array,uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
-
-
-/*
- * Internal defines
- */
-#ifndef CONCAT
-#define CONCAT(a, b) a ## b
-#endif
-#ifndef CONCAT_EXP
-#define CONCAT_EXP(a, b) CONCAT(a, b)
-#endif
-
-// #define ws2812_PORTREG CONCAT_EXP(PORT,ws2812_port)
-// #define ws2812_DDRREG CONCAT_EXP(DDR,ws2812_port)
-
-#endif /* LIGHT_WS2812_H_ */
#include <stdint.h>
#include <stdbool.h>
#include "eeconfig.h"
-#include "light_ws2812.h"
+#include "ws2812.h"
extern LED_TYPE led[RGBLED_NUM];
--- /dev/null
+/**
+ * This file has a different license to the rest of the uGFX system.
+ * You can copy, modify and distribute this file as you see fit.
+ * You do not need to publish your source modifications to this file.
+ * The only thing you are not permitted to do is to relicense it
+ * under a different license.
+ */
+
+/**
+ * Copy this file into your project directory and rename it as gfxconf.h
+ * Edit your copy to turn on the uGFX features you want to use.
+ * The values below are the defaults.
+ *
+ * Only remove the comments from lines where you want to change the
+ * default value. This allows definitions to be included from
+ * driver makefiles when required and provides the best future
+ * compatibility for your project.
+ *
+ * Please use spaces instead of tabs in this file.
+ */
+
+#ifndef COMMON_GFXCONF_H
+#define COMMON_GFXCONF_H
+
+
+///////////////////////////////////////////////////////////////////////////
+// GOS - One of these must be defined, preferably in your Makefile //
+///////////////////////////////////////////////////////////////////////////
+//#define GFX_USE_OS_CHIBIOS TRUE
+//#define GFX_USE_OS_FREERTOS FALSE
+// #define GFX_FREERTOS_USE_TRACE FALSE
+//#define GFX_USE_OS_WIN32 FALSE
+//#define GFX_USE_OS_LINUX FALSE
+//#define GFX_USE_OS_OSX FALSE
+//#define GFX_USE_OS_ECOS FALSE
+//#define GFX_USE_OS_RAWRTOS FALSE
+//#define GFX_USE_OS_ARDUINO FALSE
+//#define GFX_USE_OS_KEIL FALSE
+//#define GFX_USE_OS_CMSIS FALSE
+//#define GFX_USE_OS_RAW32 FALSE
+// #define INTERRUPTS_OFF() optional_code
+// #define INTERRUPTS_ON() optional_code
+// These are not defined by default for some reason
+#define GOS_NEED_X_THREADS FALSE
+#define GOS_NEED_X_HEAP FALSE
+
+// Options that (should where relevant) apply to all operating systems
+ #define GFX_NO_INLINE FALSE
+// #define GFX_COMPILER GFX_COMPILER_UNKNOWN
+// #define GFX_CPU GFX_CPU_UNKNOWN
+// #define GFX_OS_HEAP_SIZE 0
+// #define GFX_OS_NO_INIT FALSE
+// #define GFX_OS_INIT_NO_WARNING FALSE
+// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine
+// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine
+// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine
+
+
+///////////////////////////////////////////////////////////////////////////
+// GDISP //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GDISP TRUE
+
+//#define GDISP_NEED_AUTOFLUSH FALSE
+//#define GDISP_NEED_TIMERFLUSH FALSE
+//#define GDISP_NEED_VALIDATION TRUE
+//#define GDISP_NEED_CLIP TRUE
+#define GDISP_NEED_CIRCLE TRUE
+#define GDISP_NEED_ELLIPSE TRUE
+#define GDISP_NEED_ARC TRUE
+#define GDISP_NEED_ARCSECTORS TRUE
+#define GDISP_NEED_CONVEX_POLYGON TRUE
+//#define GDISP_NEED_SCROLL FALSE
+#define GDISP_NEED_PIXELREAD TRUE
+#define GDISP_NEED_CONTROL TRUE
+//#define GDISP_NEED_QUERY FALSE
+//#define GDISP_NEED_MULTITHREAD FALSE
+//#define GDISP_NEED_STREAMING FALSE
+#define GDISP_NEED_TEXT TRUE
+// #define GDISP_NEED_TEXT_WORDWRAP FALSE
+// #define GDISP_NEED_ANTIALIAS FALSE
+// #define GDISP_NEED_UTF8 FALSE
+ #define GDISP_NEED_TEXT_KERNING TRUE
+// #define GDISP_INCLUDE_FONT_UI1 FALSE
+// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font.
+// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE
+ #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE
+// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE
+// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE
+ #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE
+// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE
+// #define GDISP_INCLUDE_USER_FONTS FALSE
+
+//#define GDISP_NEED_IMAGE FALSE
+// #define GDISP_NEED_IMAGE_NATIVE FALSE
+// #define GDISP_NEED_IMAGE_GIF FALSE
+// #define GDISP_NEED_IMAGE_BMP FALSE
+// #define GDISP_NEED_IMAGE_BMP_1 FALSE
+// #define GDISP_NEED_IMAGE_BMP_4 FALSE
+// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE
+// #define GDISP_NEED_IMAGE_BMP_8 FALSE
+// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE
+// #define GDISP_NEED_IMAGE_BMP_16 FALSE
+// #define GDISP_NEED_IMAGE_BMP_24 FALSE
+// #define GDISP_NEED_IMAGE_BMP_32 FALSE
+// #define GDISP_NEED_IMAGE_JPG FALSE
+// #define GDISP_NEED_IMAGE_PNG FALSE
+// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE
+#ifdef EMULATOR
+#define GDISP_NEED_PIXMAP TRUE
+#endif
+// #define GDISP_NEED_PIXMAP_IMAGE FALSE
+
+//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used.
+//#define GDISP_LINEBUF_SIZE 128
+//#define GDISP_STARTUP_COLOR Black
+#define GDISP_NEED_STARTUP_LOGO FALSE
+
+//#define GDISP_TOTAL_DISPLAYS 2
+
+ #ifdef GDISP_DRIVER_LIST
+ // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
+ #define GDISP_HARDWARE_STREAM_WRITE FALSE
+ #define GDISP_HARDWARE_STREAM_READ FALSE
+ #define GDISP_HARDWARE_STREAM_POS FALSE
+ #define GDISP_HARDWARE_DRAWPIXEL TRUE
+ #define GDISP_HARDWARE_CLEARS FALSE
+ #define GDISP_HARDWARE_FILLS FALSE
+ //#define GDISP_HARDWARE_BITFILLS FALSE
+ #define GDISP_HARDWARE_SCROLL FALSE
+ #define GDISP_HARDWARE_PIXELREAD TRUE
+ #define GDISP_HARDWARE_CONTROL TRUE
+ #define GDISP_HARDWARE_QUERY FALSE
+ #define GDISP_HARDWARE_CLIP FALSE
+
+ #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888
+ #endif
+
+// The custom format is not defined for some reason, so define it as error
+// so we don't get compiler warnings
+#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
+
+#define GDISP_USE_GFXNET FALSE
+// #define GDISP_GFXNET_PORT 13001
+// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE
+// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE
+// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GWIN //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GWIN FALSE
+
+//#define GWIN_NEED_WINDOWMANAGER FALSE
+// #define GWIN_REDRAW_IMMEDIATE FALSE
+// #define GWIN_REDRAW_SINGLEOP FALSE
+// #define GWIN_NEED_FLASHING FALSE
+// #define GWIN_FLASHING_PERIOD 250
+
+//#define GWIN_NEED_CONSOLE FALSE
+// #define GWIN_CONSOLE_USE_HISTORY FALSE
+// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE
+// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE
+// #define GWIN_CONSOLE_ESCSEQ FALSE
+// #define GWIN_CONSOLE_USE_BASESTREAM FALSE
+// #define GWIN_CONSOLE_USE_FLOAT FALSE
+//#define GWIN_NEED_GRAPH FALSE
+//#define GWIN_NEED_GL3D FALSE
+
+//#define GWIN_NEED_WIDGET FALSE
+//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1
+// #define GWIN_NEED_LABEL FALSE
+// #define GWIN_LABEL_ATTRIBUTE FALSE
+// #define GWIN_NEED_BUTTON FALSE
+// #define GWIN_BUTTON_LAZY_RELEASE FALSE
+// #define GWIN_NEED_SLIDER FALSE
+// #define GWIN_SLIDER_NOSNAP FALSE
+// #define GWIN_SLIDER_DEAD_BAND 5
+// #define GWIN_SLIDER_TOGGLE_INC 20
+// #define GWIN_NEED_CHECKBOX FALSE
+// #define GWIN_NEED_IMAGE FALSE
+// #define GWIN_NEED_IMAGE_ANIMATION FALSE
+// #define GWIN_NEED_RADIO FALSE
+// #define GWIN_NEED_LIST FALSE
+// #define GWIN_NEED_LIST_IMAGES FALSE
+// #define GWIN_NEED_PROGRESSBAR FALSE
+// #define GWIN_PROGRESSBAR_AUTO FALSE
+// #define GWIN_NEED_KEYBOARD FALSE
+// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1
+// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE
+// #define GWIN_NEED_TEXTEDIT FALSE
+// #define GWIN_FLAT_STYLING FALSE
+// #define GWIN_WIDGET_TAGS FALSE
+
+//#define GWIN_NEED_CONTAINERS FALSE
+// #define GWIN_NEED_CONTAINER FALSE
+// #define GWIN_NEED_FRAME FALSE
+// #define GWIN_NEED_TABSET FALSE
+// #define GWIN_TABSET_TABHEIGHT 18
+
+
+///////////////////////////////////////////////////////////////////////////
+// GEVENT //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GEVENT TRUE
+
+//#define GEVENT_ASSERT_NO_RESOURCE FALSE
+//#define GEVENT_MAXIMUM_SIZE 32
+//#define GEVENT_MAX_SOURCE_LISTENERS 32
+
+
+///////////////////////////////////////////////////////////////////////////
+// GTIMER //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GTIMER FALSE
+
+//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY
+//#define GTIMER_THREAD_WORKAREA_SIZE 2048
+
+
+///////////////////////////////////////////////////////////////////////////
+// GQUEUE //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GQUEUE FALSE
+
+//#define GQUEUE_NEED_ASYNC FALSE
+//#define GQUEUE_NEED_GSYNC FALSE
+//#define GQUEUE_NEED_FSYNC FALSE
+//#define GQUEUE_NEED_BUFFERS FALSE
+
+///////////////////////////////////////////////////////////////////////////
+// GINPUT //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GINPUT FALSE
+
+//#define GINPUT_NEED_MOUSE FALSE
+// #define GINPUT_TOUCH_STARTRAW FALSE
+// #define GINPUT_TOUCH_NOTOUCH FALSE
+// #define GINPUT_TOUCH_NOCALIBRATE FALSE
+// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE
+// #define GINPUT_MOUSE_POLL_PERIOD 25
+// #define GINPUT_MOUSE_CLICK_TIME 300
+// #define GINPUT_TOUCH_CXTCLICK_TIME 700
+// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE
+// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE
+// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32
+//#define GINPUT_NEED_KEYBOARD FALSE
+// #define GINPUT_KEYBOARD_POLL_PERIOD 200
+// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
+// #define GKEYBOARD_LAYOUT_OFF FALSE
+// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE
+//#define GINPUT_NEED_TOGGLE FALSE
+//#define GINPUT_NEED_DIAL FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GFILE //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GFILE FALSE
+
+//#define GFILE_NEED_PRINTG FALSE
+//#define GFILE_NEED_SCANG FALSE
+//#define GFILE_NEED_STRINGS FALSE
+//#define GFILE_NEED_FILELISTS FALSE
+//#define GFILE_NEED_STDIO FALSE
+//#define GFILE_NEED_NOAUTOMOUNT FALSE
+//#define GFILE_NEED_NOAUTOSYNC FALSE
+
+//#define GFILE_NEED_MEMFS FALSE
+//#define GFILE_NEED_ROMFS FALSE
+//#define GFILE_NEED_RAMFS FALSE
+//#define GFILE_NEED_FATFS FALSE
+//#define GFILE_NEED_NATIVEFS FALSE
+//#define GFILE_NEED_CHBIOSFS FALSE
+
+//#define GFILE_ALLOW_FLOATS FALSE
+//#define GFILE_ALLOW_DEVICESPECIFIC FALSE
+//#define GFILE_MAX_GFILES 3
+
+///////////////////////////////////////////////////////////////////////////
+// GADC //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GADC FALSE
+
+//#define GADC_MAX_LOWSPEED_DEVICES 4
+
+
+///////////////////////////////////////////////////////////////////////////
+// GAUDIO //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GAUDIO FALSE
+// There seems to be a bug in the ugfx code, the wrong define is used
+// So define it in order to avoid warnings
+#define GFX_USE_GAUDIN GFX_USE_GAUDIO
+// #define GAUDIO_NEED_PLAY FALSE
+// #define GAUDIO_NEED_RECORD FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GMISC //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GMISC TRUE
+
+//#define GMISC_NEED_ARRAYOPS FALSE
+//#define GMISC_NEED_FASTTRIG FALSE
+//#define GMISC_NEED_FIXEDTRIG FALSE
+//#define GMISC_NEED_INVSQRT FALSE
+// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE
+// #define GMISC_INVSQRT_REAL_SLOW FALSE
+#define GMISC_NEED_MATRIXFLOAT2D TRUE
+#define GMISC_NEED_MATRIXFIXED2D FALSE
+
+#endif /* COMMON_GFXCONF_H */
--- /dev/null
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(VISUALIZER_ENABLE)
+
+#include "default_animations.h"
+#include "visualizer.h"
+#ifdef LCD_ENABLE
+#include "lcd_keyframes.h"
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+#include "lcd_backlight_keyframes.h"
+#endif
+
+#ifdef BACKLIGHT_ENABLE
+#include "led_backlight_keyframes.h"
+#endif
+
+#include "visualizer_keyframes.h"
+
+
+#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
+
+static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+#ifdef LCD_ENABLE
+ lcd_keyframe_enable(animation, state);
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+ lcd_backlight_keyframe_enable(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+ led_backlight_keyframe_enable(animation, state);
+#endif
+ return false;
+}
+
+static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+#ifdef LCD_ENABLE
+ lcd_keyframe_disable(animation, state);
+#endif
+#ifdef LCD_BACKLIGHT_ENABLE
+ lcd_backlight_keyframe_disable(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+ led_backlight_keyframe_disable(animation, state);
+#endif
+ return false;
+}
+
+static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
+ bool ret = false;
+#ifdef LCD_BACKLIGHT_ENABLE
+ ret |= lcd_backlight_keyframe_animate_color(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+ ret |= led_backlight_keyframe_fade_in_all(animation, state);
+#endif
+ return ret;
+}
+
+static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
+ bool ret = false;
+#ifdef LCD_BACKLIGHT_ENABLE
+ ret |= lcd_backlight_keyframe_animate_color(animation, state);
+#endif
+#ifdef BACKLIGHT_ENABLE
+ ret |= led_backlight_keyframe_fade_out_all(animation, state);
+#endif
+ return ret;
+}
+
+
+// Don't worry, if the startup animation is long, you can use the keyboard like normal
+// during that time
+keyframe_animation_t default_startup_animation = {
+#if LCD_ENABLE
+ .num_frames = 3,
+#else
+ .num_frames = 2,
+#endif
+ .loop = false,
+ .frame_lengths = {
+ 0,
+#if LCD_ENABLE
+ 0,
+#endif
+ gfxMillisecondsToTicks(5000)},
+ .frame_functions = {
+ keyframe_enable,
+#if LCD_ENABLE
+ lcd_keyframe_draw_logo,
+#endif
+ keyframe_fade_in,
+ },
+};
+
+keyframe_animation_t default_suspend_animation = {
+#if LCD_ENABLE
+ .num_frames = 3,
+#else
+ .num_frames = 2,
+#endif
+ .loop = false,
+ .frame_lengths = {
+#if LCD_ENABLE
+ 0,
+#endif
+ gfxMillisecondsToTicks(1000),
+ 0},
+ .frame_functions = {
+#if LCD_ENABLE
+ lcd_keyframe_display_layer_text,
+#endif
+ keyframe_fade_out,
+ keyframe_disable,
+ },
+};
+#endif
+
+#if defined(BACKLIGHT_ENABLE)
+#define CROSSFADE_TIME 1000
+#define GRADIENT_TIME 3000
+
+keyframe_animation_t led_test_animation = {
+ .num_frames = 14,
+ .loop = true,
+ .frame_lengths = {
+ gfxMillisecondsToTicks(1000), // fade in
+ gfxMillisecondsToTicks(1000), // no op (leds on)
+ gfxMillisecondsToTicks(1000), // fade out
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+ 0, // mirror leds
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+ gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
+ 0, // normal leds
+ gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
+
+ },
+ .frame_functions = {
+ led_backlight_keyframe_fade_in_all,
+ keyframe_no_operation,
+ led_backlight_keyframe_fade_out_all,
+ led_backlight_keyframe_crossfade,
+ led_backlight_keyframe_left_to_right_gradient,
+ led_backlight_keyframe_crossfade,
+ led_backlight_keyframe_top_to_bottom_gradient,
+ led_backlight_keyframe_mirror_orientation,
+ led_backlight_keyframe_crossfade,
+ led_backlight_keyframe_left_to_right_gradient,
+ led_backlight_keyframe_crossfade,
+ led_backlight_keyframe_top_to_bottom_gradient,
+ led_backlight_keyframe_normal_orientation,
+ led_backlight_keyframe_crossfade,
+ },
+};
+#endif
+
+#endif
--- /dev/null
+/* Copyright 2017 Fred Sundvik
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DEFAULT_ANIMATIONS_H_
+#define DEFAULT_ANIMATIONS_H_
+
+#include "visualizer.h"
+
+// You can use these default animations, but of course you can also write your own custom ones instead
+extern keyframe_animation_t default_startup_animation;
+extern keyframe_animation_t default_suspend_animation;
+
+// An animation for testing and demonstrating the led support, should probably not be used for real world
+// cases
+extern keyframe_animation_t led_test_animation;
+
+#endif /* DEFAULT_ANIMATIONS_H_ */
#include "lcd_backlight_keyframes.h"
-bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) {
int frame_length = animation->frame_lengths[animation->current_frame];
int current_pos = frame_length - animation->time_left_in_frame;
uint8_t t_h = LCD_HUE(state->target_lcd_color);
return true;
}
-bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) {
(void)animation;
state->prev_lcd_color = state->target_lcd_color;
state->current_lcd_color = state->target_lcd_color;
return false;
}
-bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
(void)animation;
(void)state;
lcd_backlight_hal_color(0, 0, 0);
return false;
}
-bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
(void)animation;
(void)state;
lcd_backlight_color(LCD_HUE(state->current_lcd_color),
+++ /dev/null
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
-#define QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_
-
-#include "visualizer.h"
-
-// Animates the LCD backlight color between the current color and the target color (of the state)
-bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state);
-// Sets the backlight color to the target color
-bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state);
-
-bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
-bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
-
-#endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */
// or state structs, here we use the image
//gdispGBlitArea is a tricky function to use since it supports blitting part of the image
- // if you have full screen image, then just use 128 and 32 for both source and target dimensions
- gdispGBlitArea(GDISP, 0, 0, 128, 32, 0, 0, 128, (pixel_t*)resource_lcd_logo);
+ // if you have full screen image, then just use LCD_WIDTH and LCD_HEIGHT for both source and target dimensions
+ gdispGBlitArea(GDISP, 0, 0, LCD_WIDTH, LCD_HEIGHT, 0, 0, LCD_WIDTH, (pixel_t*)resource_lcd_logo);
return false;
}
--- /dev/null
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 Fred Sundvik
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+#include "gfx.h"
+#include "math.h"
+#include "led_backlight_keyframes.h"
+
+static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) {
+ int frame_length = animation->frame_lengths[animation->current_frame];
+ int current_pos = frame_length - animation->time_left_in_frame;
+ int delta = to - from;
+ int luma = (delta * current_pos) / frame_length;
+ luma += from;
+ return luma;
+}
+
+static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) {
+ uint8_t luma = fade_led_color(animation, from, to);
+ color_t color = LUMA2COLOR(luma);
+ gdispGClear(LED_DISPLAY, color);
+}
+
+// TODO: Should be customizable per keyboard
+#define NUM_ROWS LED_HEIGHT
+#define NUM_COLS LED_WIDTH
+
+static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS];
+static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS];
+
+static uint8_t compute_gradient_color(float t, float index, float num) {
+ const float two_pi = M_PI * 2.0f;
+ float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi;
+ float x = t * two_pi + normalized_index;
+ float v = 0.5 * (cosf(x) + 1.0f);
+ return (uint8_t)(255.0f * v);
+}
+
+bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ keyframe_fade_all_leds_from_to(animation, 0, 255);
+ return true;
+}
+
+bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ keyframe_fade_all_leds_from_to(animation, 255, 0);
+ return true;
+}
+
+bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ float frame_length = animation->frame_lengths[animation->current_frame];
+ float current_pos = frame_length - animation->time_left_in_frame;
+ float t = current_pos / frame_length;
+ for (int i=0; i< NUM_COLS; i++) {
+ uint8_t color = compute_gradient_color(t, i, NUM_COLS);
+ gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color));
+ }
+ return true;
+}
+
+bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ float frame_length = animation->frame_lengths[animation->current_frame];
+ float current_pos = frame_length - animation->time_left_in_frame;
+ float t = current_pos / frame_length;
+ for (int i=0; i< NUM_ROWS; i++) {
+ uint8_t color = compute_gradient_color(t, i, NUM_ROWS);
+ gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color));
+ }
+ return true;
+}
+
+static void copy_current_led_state(uint8_t* dest) {
+ for (int i=0;i<NUM_ROWS;i++) {
+ for (int j=0;j<NUM_COLS;j++) {
+ dest[i*NUM_COLS + j] = gdispGGetPixelColor(LED_DISPLAY, j, i);
+ }
+ }
+}
+bool led_backlight_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ if (animation->first_update_of_frame) {
+ copy_current_led_state(&crossfade_start_frame[0][0]);
+ run_next_keyframe(animation, state);
+ copy_current_led_state(&crossfade_end_frame[0][0]);
+ }
+ for (int i=0;i<NUM_ROWS;i++) {
+ for (int j=0;j<NUM_COLS;j++) {
+ color_t color = LUMA2COLOR(fade_led_color(animation, crossfade_start_frame[i][j], crossfade_end_frame[i][j]));
+ gdispGDrawPixel(LED_DISPLAY, j, i, color);
+ }
+ }
+ return true;
+}
+
+bool led_backlight_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ (void)animation;
+ gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_180);
+ return false;
+}
+
+bool led_backlight_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ (void)animation;
+ gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_0);
+ return false;
+}
+
+bool led_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ (void)animation;
+ gdispGSetPowerMode(LED_DISPLAY, powerOff);
+ return false;
+}
+
+bool led_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
+ (void)state;
+ (void)animation;
+ gdispGSetPowerMode(LED_DISPLAY, powerOn);
+ return false;
+}
--- /dev/null
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 Fred Sundvik
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+
+#ifndef LED_BACKLIGHT_KEYFRAMES_H
+#define LED_BACKLIGHT_KEYFRAMES_H
+
+#include "visualizer.h"
+
+bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
+
+bool led_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
+bool led_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
+
+extern keyframe_animation_t led_test_animation;
+
+
+#endif /* LED_KEYFRAMES_H */
+++ /dev/null
-/*
-The MIT License (MIT)
-
-Copyright (c) 2016 Fred Sundvik
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-*/
-#include "gfx.h"
-#include "math.h"
-#include "led_keyframes.h"
-
-static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) {
- int frame_length = animation->frame_lengths[animation->current_frame];
- int current_pos = frame_length - animation->time_left_in_frame;
- int delta = to - from;
- int luma = (delta * current_pos) / frame_length;
- luma += from;
- return luma;
-}
-
-static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) {
- uint8_t luma = fade_led_color(animation, from, to);
- color_t color = LUMA2COLOR(luma);
- gdispGClear(LED_DISPLAY, color);
-}
-
-// TODO: Should be customizable per keyboard
-#define NUM_ROWS LED_NUM_ROWS
-#define NUM_COLS LED_NUM_COLS
-
-static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS];
-static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS];
-
-static uint8_t compute_gradient_color(float t, float index, float num) {
- const float two_pi = M_PI * 2.0f;
- float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi;
- float x = t * two_pi + normalized_index;
- float v = 0.5 * (cosf(x) + 1.0f);
- return (uint8_t)(255.0f * v);
-}
-
-bool led_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- keyframe_fade_all_leds_from_to(animation, 0, 255);
- return true;
-}
-
-bool led_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- keyframe_fade_all_leds_from_to(animation, 255, 0);
- return true;
-}
-
-bool led_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- float frame_length = animation->frame_lengths[animation->current_frame];
- float current_pos = frame_length - animation->time_left_in_frame;
- float t = current_pos / frame_length;
- for (int i=0; i< NUM_COLS; i++) {
- uint8_t color = compute_gradient_color(t, i, NUM_COLS);
- gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color));
- }
- return true;
-}
-
-bool led_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- float frame_length = animation->frame_lengths[animation->current_frame];
- float current_pos = frame_length - animation->time_left_in_frame;
- float t = current_pos / frame_length;
- for (int i=0; i< NUM_ROWS; i++) {
- uint8_t color = compute_gradient_color(t, i, NUM_ROWS);
- gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color));
- }
- return true;
-}
-
-static void copy_current_led_state(uint8_t* dest) {
- for (int i=0;i<NUM_ROWS;i++) {
- for (int j=0;j<NUM_COLS;j++) {
- dest[i*NUM_COLS + j] = gdispGGetPixelColor(LED_DISPLAY, j, i);
- }
- }
-}
-bool led_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- if (animation->first_update_of_frame) {
- copy_current_led_state(&crossfade_start_frame[0][0]);
- run_next_keyframe(animation, state);
- copy_current_led_state(&crossfade_end_frame[0][0]);
- }
- for (int i=0;i<NUM_ROWS;i++) {
- for (int j=0;j<NUM_COLS;j++) {
- color_t color = LUMA2COLOR(fade_led_color(animation, crossfade_start_frame[i][j], crossfade_end_frame[i][j]));
- gdispGDrawPixel(LED_DISPLAY, j, i, color);
- }
- }
- return true;
-}
-
-bool led_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- (void)animation;
- gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_180);
- return false;
-}
-
-bool led_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- (void)animation;
- gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_0);
- return false;
-}
-
-bool led_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- (void)animation;
- gdispGSetPowerMode(LED_DISPLAY, powerOff);
- return false;
-}
-
-bool led_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
- (void)state;
- (void)animation;
- gdispGSetPowerMode(LED_DISPLAY, powerOn);
- return false;
-}
+++ /dev/null
-/*
-The MIT License (MIT)
-
-Copyright (c) 2016 Fred Sundvik
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-*/
-
-#ifndef LED_KEYFRAMES_H
-#define LED_KEYFRAMES_H
-
-#include "visualizer.h"
-
-bool led_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state);
-
-bool led_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
-bool led_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
-
-extern keyframe_animation_t led_test_animation;
-
-
-#endif /* LED_KEYFRAMES_H */
// Define this in config.h
#ifndef VISUALIZER_THREAD_PRIORITY
-#define "Visualizer thread priority not defined"
+// The visualizer needs gfx thread priorities
+#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
#endif
static visualizer_keyboard_status_t current_status = {
.mods = 0xFF,
.leds = 0xFFFFFFFF,
.suspended = false,
+ #ifdef BACKLIGHT_ENABLE
+ .backlight_level = 0,
+ #endif
#ifdef VISUALIZER_USER_DATA_SIZE
.user_data = {0},
#endif
else {
gdispGSetPowerMode(LED_DISPLAY, powerOff);
}
+ state.status.backlight_level = current_status.backlight_level;
}
#endif
if (visualizer_enabled) {
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
+define ADD_DRIVER
+ $(1)_DRIVER:=$(strip $($(1)_DRIVER))
+ $(1)_WIDTH:=$(strip $($(1)_WIDTH))
+ $(1)_HEIGHT:=$(strip $($(1)_HEIGHT))
+ ifeq ($($(1)_DRIVER),)
+ $$(error $(1)_DRIVER is not defined)
+ endif
+ ifeq ($($(1)_WIDTH),)
+ $$(error $(1)_WIDTH is not defined)
+ endif
+ ifeq ($($(1)_HEIGHT),)
+ $$(error $(1)_HEIGHT is not defined)
+ endif
+ OPT_DEFS+=-D$(1)_WIDTH=$($(1)_WIDTH)
+ OPT_DEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT)
+ GFXDEFS+=-D$(1)_WIDTH=$($(1)_WIDTH)
+ GFXDEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT)
+ $(1)_DISPLAY_NUMBER:=$$(words $$(GDISP_DRIVER_LIST))
+ OPT_DEFS+=-D$(1)_DISPLAY_NUMBER=$$($(1)_DISPLAY_NUMBER)
+ include $(TOP_DIR)/drivers/ugfx/gdisp/$($(1)_DRIVER)/driver.mk
+endef
+
+GDISP_DRIVER_LIST:=
+
SRC += $(VISUALIZER_DIR)/visualizer.c \
$(VISUALIZER_DIR)/visualizer_keyframes.c
EXTRAINCDIRS += $(GFXINC) $(VISUALIZER_DIR)
# Note, that the linker will strip out any resources that are not actually in use
SRC += $(VISUALIZER_DIR)/resources/lcd_logo.c
OPT_DEFS += -DLCD_BACKLIGHT_ENABLE
+$(eval $(call ADD_DRIVER,LCD))
endif
ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
-SRC += $(VISUALIZER_DIR)/led_keyframes.c
+SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c
+$(eval $(call ADD_DRIVER,LED))
endif
+SRC += $(VISUALIZER_DIR)/default_animations.c
+
include $(GFXLIB)/gfx.mk
+# For the common_gfxconf.h
+GFXINC += quantum/visualizer
+
GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC))
GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS)))
+GDISP_LIST_COMMA=,
+GDISP_LIST_EMPTY=
+GDISP_LIST_SPACE=$(GDISP_LIST_EMPTY) $(GDISP_LIST_EMPTY)
+
+GDISP_DRIVER_LIST := $(strip $(GDISP_DRIVER_LIST))
+GDISP_DRIVER_LIST := $(subst $(GDISP_LIST_SPACE),$(GDISP_LIST_COMMA),$(GDISP_DRIVER_LIST))
+
+GFXDEFS +=-DGDISP_DRIVER_LIST="$(GDISP_DRIVER_LIST)"
+
ifneq ("$(wildcard $(KEYMAP_PATH)/visualizer.c)","")
SRC += keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/visualizer.c
else
EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
BIN =
-
+COMMON_VPATH += $(DRIVER_PATH)/avr
COMPILEFLAGS += -funsigned-char
COMPILEFLAGS += -funsigned-bitfields
DEBUG_HOST = localhost
#============================================================================
-# Autodecct teensy loader
-ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
- TEENSY_LOADER_CLI ?= teensy-loader-cli
-else
- TEENSY_LOADER_CLI ?= teensy_loader_cli
+# Autodetect teensy loader
+ifndef TEENSY_LOADER_CLI
+ ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+ TEENSY_LOADER_CLI ?= teensy-loader-cli
+ else
+ TEENSY_LOADER_CLI ?= teensy_loader_cli
+ endif
endif
# Program the device.
echo "Error: Bootloader not found. Trying again in 5s." ;\
sleep 5 ;\
done
-ifneq (, $(findstring 0.7, $(shell $(DFU_PROGRAMMER) --version 2>&1)))
- $(DFU_PROGRAMMER) $(MCU) erase --force
-else
- $(DFU_PROGRAMMER) $(MCU) erase
-endif
+ if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+ $(DFU_PROGRAMMER) $(MCU) erase --force;\
+ else\
+ $(DFU_PROGRAMMER) $(MCU) erase;\
+ fi
$(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
$(DFU_PROGRAMMER) $(MCU) reset
$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
- $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
-else
- $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
-endif
+ if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+ $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\
+ else\
+ $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\
+ fi
$(DFU_PROGRAMMER) $(MCU) reset
# Convert hex to bin.
projects / qmk_firmware.git / commitdiff