* define is matrix has ghost (unlikely)
* `#define DIODE_DIRECTION COL2ROW`
* COL2ROW or ROW2COL - how your matrix is configured. COL2ROW means the black mark on your diode is facing to the rows, and between the switch and the rows.
+* `#define DIRECT_PINS { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } }`
+ * pins mapped to rows and columns, from left to right. Defines a matrix where each switch is connected to a separate pin and ground.
* `#define AUDIO_VOICES`
* turns on the alternate audio voices (to cycle through)
* `#define C4_AUDIO`
#define DIODE_DIRECTION COL2ROW
```
+#### Direct Pin Matrix
+To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
+
+```c
+// #define MATRIX_ROW_PINS { D0, D5 }
+// #define MATRIX_COL_PINS { F1, F0, B0 }
+#define DIRECT_PINS { \
+ { F1, E6, B0, B2, B3 }, \
+ { F5, F0, B1, B7, D2 }, \
+ { F6, F7, C7, D5, D3 }, \
+ { B5, C6, B6, NO_PIN, NO_PIN } \
+}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+//#define DIODE_DIRECTION
+```
+
### Backlight Configuration
By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
For the `DIODE_DIRECTION`, most hand-wiring guides will instruct you to wire the diodes in the `COL2ROW` position, but it's possible that they are in the other - people coming from EasyAVR often use `ROW2COL`. Nothing will function if this is incorrect.
+To configure a keyboard where each switch is connected to a separate pin and ground instead of sharing row and column pins, use `DIRECT_PINS`. The mapping defines the pins of each switch in rows and columns, from left to right. Must conform to the sizes within `MATRIX_ROWS` and `MATRIX_COLS`, use `NO_PIN` to fill in blank spaces. Overrides the behaviour of `DIODE_DIRECTION`, `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`.
+
`BACKLIGHT_PIN` is the pin that your PWM-controlled backlight (if one exists) is hooked-up to. Currently only B5, B6, and B7 are supported.
`BACKLIGHT_BREATHING` is a fancier backlight feature that adds breathing/pulsing/fading effects to the backlight. It uses the same timer as the normal backlight. These breathing effects must be called by code in your keymap.
#define MATRIX_ROWS 2
#define MATRIX_COLS 4
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ * NO_DIODE = switches are directly connected to AVR pins
+ *
+*/
+// #define MATRIX_ROW_PINS { D0, D5 }
+// #define MATRIX_COL_PINS { F1, F0, B0 }
+#define DIRECT_PINS { \
+ { F4, F5, F6, F7 }, \
+ { D1, D0, D4, C6 }, \
+}
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+//#define DIODE_DIRECTION CUSTOM_MATRIX
+
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 6 // Number of LEDs
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-#define TAPPING_TERM 200
+++ /dev/null
-/*
-
-Note for ErgoDox EZ customizers: Here be dragons!
-This is not a file you want to be messing with.
-All of the interesting stuff for you is under keymaps/ :)
-Love, Erez
-
-Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "action_layer.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "nano.h"
-#include <string.h>
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_stage[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static uint16_t debouncing_time;
-static bool debouncing = false;
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-
- DDRF &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
- PORTF |= (1<<4 | 1<<5 | 1<<6 | 1<<7);
- DDRC &= ~(1<<6);
- PORTC |= (1<<6);
- DDRD &= ~(1<<0 | 1<<1 | 1<<4);
- PORTD |= (1<<0 | 1<<1 | 1<<4);
-
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- matrix_stage[i] = 0;
- }
-
- matrix_init_quantum();
-
-}
-
-uint8_t matrix_scan(void)
-{
- matrix_stage[0] =
- (PINF&(1<<4) ? 0 : (1<<0)) |
- (PINF&(1<<5) ? 0 : (1<<1)) |
- (PINF&(1<<6) ? 0 : (1<<2)) |
- (PINF&(1<<7) ? 0 : (1<<3));
- matrix_stage[1] =
- (PIND&(1<<1) ? 0 : (1<<0)) |
- (PIND&(1<<0) ? 0 : (1<<1)) |
- (PIND&(1<<4) ? 0 : (1<<2)) |
- (PINC&(1<<6) ? 0 : (1<<3));
-
- if (memcmp(matrix_debouncing, matrix_stage, sizeof(matrix)) != 0) {
- debouncing = true;
- debouncing_time = timer_read();
- }
-
- matrix_debouncing[0] = matrix_stage[0];
- matrix_debouncing[1] = matrix_stage[1];
-
- if (debouncing && (timer_elapsed(debouncing_time) > 20)) {
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = matrix_debouncing[i];
- }
- debouncing = false;
- }
-
- matrix_scan_quantum();
-
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
-}
-
#include "quantum.h"
-#define LAYOUT( \
+#define LAYOUT_ortho_2x4( \
k01, k02, k03, k04, \
k05, k06, k07, k08 \
) { \
{ k01, k02, k03, k04 }, \
{ k05, k06, k07, k08 } \
}
+
+#define LAYOUT LAYOUT_ortho_2x4
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-
-# custom matrix setup
-SRC = matrix.c
-CUSTOM_MATRIX = yes
extern const matrix_row_t matrix_mask[];
#endif
-#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+#ifdef DIRECT_PINS
+static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
+#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
#endif
static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
-#if (DIODE_DIRECTION == COL2ROW)
- static void init_cols(void);
- static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
- static void unselect_rows(void);
- static void select_row(uint8_t row);
- static void unselect_row(uint8_t row);
-#elif (DIODE_DIRECTION == ROW2COL)
- static void init_rows(void);
- static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
- static void unselect_cols(void);
- static void unselect_col(uint8_t col);
- static void select_col(uint8_t col);
-#endif
-
__attribute__ ((weak))
void matrix_init_quantum(void) {
matrix_init_kb();
return MATRIX_COLS;
}
-void matrix_init(void) {
-
- // initialize row and col
-#if (DIODE_DIRECTION == COL2ROW)
- unselect_rows();
- init_cols();
-#elif (DIODE_DIRECTION == ROW2COL)
- unselect_cols();
- init_rows();
-#endif
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- raw_matrix[i] = 0;
- matrix[i] = 0;
- }
- debounce_init(MATRIX_ROWS);
-
- matrix_init_quantum();
-}
-
-uint8_t matrix_scan(void)
-{
- bool changed = false;
-
-#if (DIODE_DIRECTION == COL2ROW)
- // Set row, read cols
- for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
- changed |= read_cols_on_row(raw_matrix, current_row);
- }
-#elif (DIODE_DIRECTION == ROW2COL)
- // Set col, read rows
- for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
- changed |= read_rows_on_col(raw_matrix, current_col);
- }
-#endif
-
- debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
-
- matrix_scan_quantum();
- return 1;
-}
-
//Deprecated.
bool matrix_is_modified(void)
{
}
+#ifdef DIRECT_PINS
+
+static void init_pins(void) {
+ for (int row = 0; row < MATRIX_ROWS; row++) {
+ for (int col = 0; col < MATRIX_COLS; col++) {
+ pin_t pin = direct_pins[row][col];
+ if (pin != NO_PIN) {
+ setPinInputHigh(pin);
+ }
+ }
+ }
+}
-#if (DIODE_DIRECTION == COL2ROW)
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+ matrix_row_t last_row_value = current_matrix[current_row];
+ current_matrix[current_row] = 0;
-static void init_cols(void)
+ for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+ pin_t pin = direct_pins[current_row][col_index];
+ if (pin != NO_PIN) {
+ current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
+ }
+ }
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == COL2ROW)
+
+static void select_row(uint8_t row)
{
- for(uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
+ setPinOutput(row_pins[row]);
+ writePinLow(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row)
+{
+ setPinInputHigh(row_pins[row]);
+}
+
+static void unselect_rows(void)
+{
+ for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ setPinInput(row_pins[x]);
}
}
+static void init_pins(void) {
+ unselect_rows();
+ for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+ setPinInputHigh(col_pins[x]);
+ }
+}
+
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
// Store last value of row prior to reading
return (last_row_value != current_matrix[current_row]);
}
-static void select_row(uint8_t row)
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void select_col(uint8_t col)
{
- setPinOutput(row_pins[row]);
- writePinLow(row_pins[row]);
+ setPinOutput(col_pins[col]);
+ writePinLow(col_pins[col]);
}
-static void unselect_row(uint8_t row)
+static void unselect_col(uint8_t col)
{
- setPinInputHigh(row_pins[row]);
+ setPinInputHigh(col_pins[col]);
}
-static void unselect_rows(void)
+static void unselect_cols(void)
{
- for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
- setPinInput(row_pins[x]);
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ setPinInputHigh(col_pins[x]);
}
}
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void init_rows(void)
-{
- for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
- setPinInputHigh(row_pins[x]);
- }
+static void init_pins(void) {
+ unselect_cols();
+ for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+ setPinInputHigh(row_pins[x]);
+ }
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
return matrix_changed;
}
-static void select_col(uint8_t col)
-{
- setPinOutput(col_pins[col]);
- writePinLow(col_pins[col]);
-}
+#endif
-static void unselect_col(uint8_t col)
-{
- setPinInputHigh(col_pins[col]);
-}
+void matrix_init(void) {
-static void unselect_cols(void)
-{
- for(uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
+ // initialize key pins
+ init_pins();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ raw_matrix[i] = 0;
+ matrix[i] = 0;
}
+
+ debounce_init(MATRIX_ROWS);
+
+ matrix_init_quantum();
}
+uint8_t matrix_scan(void)
+{
+ bool changed = false;
+
+#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
+ // Set row, read cols
+ for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+ changed |= read_cols_on_row(raw_matrix, current_row);
+ }
+#elif (DIODE_DIRECTION == ROW2COL)
+ // Set col, read rows
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+ changed |= read_rows_on_col(raw_matrix, current_col);
+ }
#endif
+
+ debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+ matrix_scan_quantum();
+ return 1;
+}
projects / qmk_firmware.git / commitdiff