Adds .qmk file type as a target for QMK Toolbox (#1084)

[qmk_firmware.git] / tmk_core / avr.mk

diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk
index 5df539def518ecdabb68dec01539eaf50e0c8820..80e8b2be646f75dc6fdfc23997cb2bb4c6efa64c 100644 (file)
--- a/tmk_core/avr.mk
+++ b/tmk_core/avr.mk
@@ -12,7 +12,7 @@ HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
 EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) 
 BIN =
 
-
+COMMON_VPATH += $(DRIVER_PATH)/avr
 
 COMPILEFLAGS += -funsigned-char
 COMPILEFLAGS += -funsigned-bitfields
@@ -87,61 +87,112 @@ DEBUG_PORT = 4242
 DEBUG_HOST = localhost
 
 #============================================================================
-# Autodecct teensy loader
-ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
-  TEENSY_LOADER_CLI = teensy-loader-cli
-else
-  TEENSY_LOADER_CLI = teensy_loader_cli
+# Autodetect teensy loader
+ifndef TEENSY_LOADER_CLI
+    ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+        TEENSY_LOADER_CLI ?= teensy-loader-cli
+    else
+        TEENSY_LOADER_CLI ?= teensy_loader_cli
+    endif
 endif
 
+# Generate a .qmk for the QMK-FF
+qmk: $(BUILD_DIR)/$(TARGET).hex
+       zip $(TARGET).qmk -FSrj $(KEYMAP_PATH)/*
+       zip $(TARGET).qmk -u $<
+       printf "@ $<\n@=firmware.hex\n" | zipnote -w $(TARGET).qmk
+       printf "{\n  \"generated\": \"%s\"\n}" "$$(date)" > $(BUILD_DIR)/$(TARGET).json
+       if [ -f $(KEYBOARD_PATH_5)/info.json ]; then \
+               jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_5)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+       fi
+       if [ -f $(KEYBOARD_PATH_4)/info.json ]; then \
+               jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_4)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+       fi
+       if [ -f $(KEYBOARD_PATH_3)/info.json ]; then \
+               jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_3)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+       fi
+       if [ -f $(KEYBOARD_PATH_2)/info.json ]; then \
+               jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_2)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+       fi
+       if [ -f $(KEYBOARD_PATH_1)/info.json ]; then \
+               jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_1)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+       fi
+       zip $(TARGET).qmk -urj $(BUILD_DIR)/$(TARGET).json
+       printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
+
 # Program the device.
 program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
        $(PROGRAM_CMD)
 
 teensy: $(BUILD_DIR)/$(TARGET).hex
        $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
+       
+BATCHISP ?= batchisp 
 
 flip: $(BUILD_DIR)/$(TARGET).hex
-       batchisp -hardware usb -device $(MCU) -operation erase f
-       batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
-       batchisp -hardware usb -device $(MCU) -operation start reset 0
+       $(BATCHISP) -hardware usb -device $(MCU) -operation erase f
+       $(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
+       $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
+       
+DFU_PROGRAMMER ?= dfu-programmer
 
 dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
-       until dfu-programmer $(MCU) get bootloader-version; do\
+       until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
                echo "Error: Bootloader not found. Trying again in 5s." ;\
                sleep 5 ;\
        done
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
-       dfu-programmer $(MCU) erase --force
-else
-       dfu-programmer $(MCU) erase
-endif
-       dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
-       dfu-programmer $(MCU) reset
+       if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+               $(DFU_PROGRAMMER) $(MCU) erase --force;\
+       else\
+               $(DFU_PROGRAMMER) $(MCU) erase;\
+       fi
+       $(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+       $(DFU_PROGRAMMER) $(MCU) reset
 
 dfu-start:
-       dfu-programmer $(MCU) reset
-       dfu-programmer $(MCU) start
+       $(DFU_PROGRAMMER) $(MCU) reset
+       $(DFU_PROGRAMMER) $(MCU) start
 
 flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
        $(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
-       batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
-       batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
-       batchisp -hardware usb -device $(MCU) -operation start reset 0
+       $(BATCHISP) -hardware usb -device $(MCU) -operation memory EEPROM erase
+       $(BATCHISP) -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
+       $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
        $(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
 
 dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
-       dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
-else
-       dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
-endif
-       dfu-programmer $(MCU) reset
+       if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+               $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\
+       else\
+               $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\
+       fi
+       $(DFU_PROGRAMMER) $(MCU) reset
+
+avrdude: $(BUILD_DIR)/$(TARGET).hex
+       if grep -q -s Microsoft /proc/version; then \
+               echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
+       else \
+               ls /dev/tty* > /tmp/1; \
+               echo "Detecting USB port, reset your controller now.\c"; \
+               while [ -z $$USB ]; do \
+                       sleep 1; \
+                       echo ".\c"; \
+                       ls /dev/tty* > /tmp/2; \
+                       USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+               done; \
+               echo ""; \
+               echo "Detected controller on USB port at $$USB"; \
+               sleep 1; \
+               avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+       fi
 
 # Convert hex to bin.
-flashbin: $(BUILD_DIR)/$(TARGET).hex
+bin: $(BUILD_DIR)/$(TARGET).hex
        $(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
        $(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
+
+# copy bin to FLASH.bin
+flashbin: bin
        $(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin; 
 
 # Generate avr-gdb config/init file which does the following: