OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
-AR = avr-ar rcs
+AR = avr-ar
NM = avr-nm
HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature
-EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
+EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
BIN =
COMMON_VPATH += $(DRIVER_PATH)/avr
endif
endif
+# Generate a .qmk for the QMK-FF
+qmk: $(BUILD_DIR)/$(TARGET).hex
+ zip $(TARGET).qmk -FSrj $(KEYMAP_PATH)/*
+ zip $(TARGET).qmk -u $<
+ printf "@ $<\n@=firmware.hex\n" | zipnote -w $(TARGET).qmk
+ printf "{\n \"generated\": \"%s\"\n}" "$$(date)" > $(BUILD_DIR)/$(TARGET).json
+ if [ -f $(KEYBOARD_PATH_5)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_5)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_4)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_4)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_3)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_3)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_2)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_2)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_1)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_1)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ zip $(TARGET).qmk -urj $(BUILD_DIR)/$(TARGET).json
+ printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
+
# Program the device.
-program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
$(PROGRAM_CMD)
-teensy: $(BUILD_DIR)/$(TARGET).hex
+teensy: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-
-BATCHISP ?= batchisp
-flip: $(BUILD_DIR)/$(TARGET).hex
+BATCHISP ?= batchisp
+
+flip: $(BUILD_DIR)/$(TARGET).hex check-size
$(BATCHISP) -hardware usb -device $(MCU) -operation erase f
$(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
$(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
-
+
DFU_PROGRAMMER ?= dfu-programmer
+GREP ?= grep
-dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
+dfu: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
echo "Error: Bootloader not found. Trying again in 5s." ;\
sleep 5 ;\
done
- if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+ if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
$(DFU_PROGRAMMER) $(MCU) erase --force;\
else\
$(DFU_PROGRAMMER) $(MCU) erase;\
$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
- if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+ if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
$(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\
else\
$(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\
fi
$(DFU_PROGRAMMER) $(MCU) reset
-avrdude: $(BUILD_DIR)/$(TARGET).hex
- ls /dev/tty* > /tmp/1; \
- echo "Detecting Pro Micro port, reset your Pro Micro now.\c"; \
- while [ -z $$USB ]; do \
- sleep 1; \
- echo ".\c"; \
- ls /dev/tty* > /tmp/2; \
- USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
- done; \
- echo ""; \
- echo "Detected Pro Micro port at $$USB"; \
- sleep 1; \
- avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+dfu-split-left: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
+ until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
+ echo "Error: Bootloader not found. Trying again in 5s." ;\
+ sleep 5 ;\
+ done
+ if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
+ $(DFU_PROGRAMMER) $(MCU) erase --force;\
+ $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(QUANTUM_PATH)/split_common/eeprom-lefthand.eep;\
+ else\
+ $(DFU_PROGRAMMER) $(MCU) erase;\
+ $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/eeprom-lefthand.eep;\
+ fi
+ $(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+ $(DFU_PROGRAMMER) $(MCU) reset
+
+dfu-split-right: $(BUILD_DIR)/$(TARGET).hex cpfirmware check-size
+ until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
+ echo "Error: Bootloader not found. Trying again in 5s." ;\
+ sleep 5 ;\
+ done
+ if $(DFU_PROGRAMMER) --version 2>&1 | $(GREP) -q 0.7 ; then\
+ $(DFU_PROGRAMMER) $(MCU) erase --force;\
+ $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(QUANTUM_PATH)/split_common/eeprom-righthand.eep;\
+ else\
+ $(DFU_PROGRAMMER) $(MCU) erase;\
+ $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(QUANTUM_PATH)/split_common/eeprom-righthand.eep;\
+ fi
+ $(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+ $(DFU_PROGRAMMER) $(MCU) reset
+
+define EXEC_AVRDUDE
+ USB= ;\
+ if $(GREP) -q -s Microsoft /proc/version; then \
+ echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
+ else \
+ printf "Detecting USB port, reset your controller now."; \
+ ls /dev/tty* > /tmp/1; \
+ while [ -z $$USB ]; do \
+ sleep 0.5; \
+ printf "."; \
+ ls /dev/tty* > /tmp/2; \
+ USB=`comm -13 /tmp/1 /tmp/2 | $(GREP) -o '/dev/tty.*'`; \
+ mv /tmp/2 /tmp/1; \
+ done; \
+ echo ""; \
+ echo "Device $$USB has appeared; assuming it is the controller."; \
+ if $(GREP) -q -s 'MINGW\|MSYS' /proc/version; then \
+ USB=`echo "$$USB" | perl -pne 's/\/dev\/ttyS(\d+)/COM.($$1+1)/e'`; \
+ echo "Remapped MSYS2 USB port to $$USB"; \
+ sleep 1; \
+ else \
+ printf "Waiting for $$USB to become writable."; \
+ while [ ! -w "$$USB" ]; do sleep 0.5; printf "."; done; echo ""; \
+ fi; \
+ if [ -z "$(1)" ]; then \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+ else \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex -U eeprom:w:$(QUANTUM_PATH)/split_common/$(1); \
+ fi \
+ fi
+endef
+
+avrdude: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ $(call EXEC_AVRDUDE)
+
+avrdude-loop: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ while true; do \
+ $(call EXEC_AVRDUDE) ; \
+ done
+
+avrdude-split-left: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ $(call EXEC_AVRDUDE,eeprom-lefthand.eep)
+
+avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ $(call EXEC_AVRDUDE,eeprom-righthand.eep)
+
+usbasp: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
+ avrdude -p $(MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
# Convert hex to bin.
-flashbin: $(BUILD_DIR)/$(TARGET).hex
+bin: $(BUILD_DIR)/$(TARGET).hex
$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
- $(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
+
+# copy bin to FLASH.bin
+flashbin: bin
+ $(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
+bootloader:
+ make -C lib/lufa/Bootloaders/DFU/ clean
+ $(TMK_DIR)/make_dfu_header.sh $(ALL_CONFIGS)
+ make -C lib/lufa/Bootloaders/DFU/
+ printf "BootloaderDFU.hex copied to $(TARGET)_bootloader.hex\n"
+ cp lib/lufa/Bootloaders/DFU/BootloaderDFU.hex $(TARGET)_bootloader.hex
+
+production: $(BUILD_DIR)/$(TARGET).hex bootloader cpfirmware
+ @cat $(BUILD_DIR)/$(TARGET).hex | awk '/^:00000001FF/ == 0' > $(TARGET)_production.hex
+ @cat $(TARGET)_bootloader.hex >> $(TARGET)_production.hex
+ echo "File sizes:"
+ $(SIZE) $(TARGET).hex $(TARGET)_bootloader.hex $(TARGET)_production.hex
projects / qmk_firmware.git / blobdiff