EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT)
BIN =
-
+COMMON_VPATH += $(DRIVER_PATH)/avr
COMPILEFLAGS += -funsigned-char
COMPILEFLAGS += -funsigned-bitfields
DEBUG_HOST = localhost
#============================================================================
-# Autodecct teensy loader
-ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
- TEENSY_LOADER_CLI = teensy-loader-cli
-else
- TEENSY_LOADER_CLI = teensy_loader_cli
+# Autodetect teensy loader
+ifndef TEENSY_LOADER_CLI
+ ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+ TEENSY_LOADER_CLI ?= teensy-loader-cli
+ else
+ TEENSY_LOADER_CLI ?= teensy_loader_cli
+ endif
endif
+# Generate a .qmk for the QMK-FF
+qmk: $(BUILD_DIR)/$(TARGET).hex
+ zip $(TARGET).qmk -FSrj $(KEYMAP_PATH)/*
+ zip $(TARGET).qmk -u $<
+ printf "@ $<\n@=firmware.hex\n" | zipnote -w $(TARGET).qmk
+ printf "{\n \"generated\": \"%s\"\n}" "$$(date)" > $(BUILD_DIR)/$(TARGET).json
+ if [ -f $(KEYBOARD_PATH_5)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_5)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_4)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_4)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_3)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_3)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_2)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_2)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ if [ -f $(KEYBOARD_PATH_1)/info.json ]; then \
+ jq -s '.[0] * .[1]' $(BUILD_DIR)/$(TARGET).json $(KEYBOARD_PATH_1)/info.json | ex -sc 'wq!$(BUILD_DIR)/$(TARGET).json' /dev/stdin; \
+ fi
+ zip $(TARGET).qmk -urj $(BUILD_DIR)/$(TARGET).json
+ printf "@ $(TARGET).json\n@=info.json\n" | zipnote -w $(TARGET).qmk
+
# Program the device.
-program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep check-size
$(PROGRAM_CMD)
-teensy: $(BUILD_DIR)/$(TARGET).hex
+teensy: $(BUILD_DIR)/$(TARGET).hex check-size
$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-
-flip: $(BUILD_DIR)/$(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
- until dfu-programmer $(MCU) get bootloader-version; do\
+
+BATCHISP ?= batchisp
+
+flip: $(BUILD_DIR)/$(TARGET).hex check-size
+ $(BATCHISP) -hardware usb -device $(MCU) -operation erase f
+ $(BATCHISP) -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
+ $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
+
+DFU_PROGRAMMER ?= dfu-programmer
+
+dfu: $(BUILD_DIR)/$(TARGET).hex check-size
+ until $(DFU_PROGRAMMER) $(MCU) get bootloader-version; do\
echo "Error: Bootloader not found. Trying again in 5s." ;\
sleep 5 ;\
done
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
- dfu-programmer $(MCU) erase --force
-else
- dfu-programmer $(MCU) erase
-endif
- dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
- dfu-programmer $(MCU) reset
+ if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+ $(DFU_PROGRAMMER) $(MCU) erase --force;\
+ else\
+ $(DFU_PROGRAMMER) $(MCU) erase;\
+ fi
+ $(DFU_PROGRAMMER) $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+ $(DFU_PROGRAMMER) $(MCU) reset
dfu-start:
- dfu-programmer $(MCU) reset
- dfu-programmer $(MCU) start
+ $(DFU_PROGRAMMER) $(MCU) reset
+ $(DFU_PROGRAMMER) $(MCU) start
flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
+ $(BATCHISP) -hardware usb -device $(MCU) -operation memory EEPROM erase
+ $(BATCHISP) -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
+ $(BATCHISP) -hardware usb -device $(MCU) -operation start reset 0
$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
- dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
-else
- dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
-endif
- dfu-programmer $(MCU) reset
+ if $(DFU_PROGRAMMER) --version 2>&1 | grep -q 0.7 ; then\
+ $(DFU_PROGRAMMER) $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep;\
+ else\
+ $(DFU_PROGRAMMER) $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep;\
+ fi
+ $(DFU_PROGRAMMER) $(MCU) reset
+
+avrdude: $(BUILD_DIR)/$(TARGET).hex check-size
+ if grep -q -s Microsoft /proc/version; then \
+ echo 'ERROR: AVR flashing cannot be automated within the Windows Subsystem for Linux (WSL) currently. Instead, take the .hex file generated and flash it using AVRDUDE, AVRDUDESS, or XLoader.'; \
+ else \
+ ls /dev/tty* > /tmp/1; \
+ echo -e "Detecting USB port, reset your controller now.\c"; \
+ while [ -z $$USB ]; do \
+ sleep 1; \
+ echo -e ".\c"; \
+ ls /dev/tty* > /tmp/2; \
+ USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+ done; \
+ echo ""; \
+ echo "Detected controller on USB port at $$USB"; \
+ sleep 1; \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex; \
+ fi
# Convert hex to bin.
-flashbin: $(BUILD_DIR)/$(TARGET).hex
+bin: $(BUILD_DIR)/$(TARGET).hex
$(OBJCOPY) -Iihex -Obinary $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).bin
$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
+
+# copy bin to FLASH.bin
+flashbin: bin
$(COPY) $(BUILD_DIR)/$(TARGET).bin FLASH.bin;
# Generate avr-gdb config/init file which does the following:
@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
+bootloader:
+ make -C lib/lufa/Bootloaders/DFU/ clean
+ echo "#ifndef QMK_KEYBOARD\n#define QMK_KEYBOARD\n" > lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo `grep "MANUFACTURER" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo `grep "PRODUCT" $(ALL_CONFIGS) -h | tail -1` Bootloader >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo `grep "QMK_ESC_OUTPUT" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo `grep "QMK_ESC_INPUT" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo `grep "QMK_LED" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo `grep "QMK_SPEAKER" $(ALL_CONFIGS) -h | tail -1` >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ echo "\n#endif" >> lib/lufa/Bootloaders/DFU/Keyboard.h
+ make -C lib/lufa/Bootloaders/DFU/
+ echo "BootloaderDFU.hex copied to $(TARGET)_bootloader.hex"
+ cp lib/lufa/Bootloaders/DFU/BootloaderDFU.hex $(TARGET)_bootloader.hex
+
+production: $(BUILD_DIR)/$(TARGET).hex bootloader
+ @cat $(BUILD_DIR)/$(TARGET).hex | awk '/^:00000001FF/ == 0' > $(TARGET)_production.hex
+ @cat $(TARGET)_bootloader.hex >> $(TARGET)_production.hex
+ echo "File sizes:"
+ $(SIZE) $(TARGET).hex $(TARGET)_bootloader.hex $(TARGET)_production.hex
+
projects / qmk_firmware.git / blobdiff