#if defined(MIDI_ENABLE) && defined(MIDI_BASIC)
process_midi_all_notes_off();
#endif
-#if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE)
- music_all_notes_off();
+#ifdef AUDIO_ENABLE
+ #ifndef NO_MUSIC_MODE
+ music_all_notes_off();
+ #endif
uint16_t timer_start = timer_read();
PLAY_SONG(goodbye_song);
shutdown_user();
wait_ms(1);
stop_all_notes();
#else
+ shutdown_user();
wait_ms(250);
#endif
// this is also done later in bootloader.c - not sure if it's neccesary here
process_clicky(keycode, record) &&
#endif //AUDIO_CLICKY
process_record_kb(keycode, record) &&
+ #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYPRESSES)
+ process_rgb_matrix(keycode, record) &&
+ #endif
#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
process_midi(keycode, record) &&
#endif
}
return false;
#endif
- #ifdef RGBLIGHT_ENABLE
+ #if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
case RGB_TOG:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_toggle();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_MODE_FORWARD:
else {
rgblight_step();
}
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_MODE_REVERSE:
else {
rgblight_step_reverse();
}
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_HUI:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_increase_hue();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_HUD:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_decrease_hue();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_SAI:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_increase_sat();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_SAD:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_decrease_sat();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_VAI:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_increase_val();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_VAD:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_decrease_val();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
+ }
+ return false;
+ case RGB_SPI:
+ if (record->event.pressed) {
+ rgblight_increase_speed();
+ }
+ return false;
+ case RGB_SPD:
+ if (record->event.pressed) {
+ rgblight_decrease_speed();
}
return false;
case RGB_MODE_PLAIN:
if (record->event.pressed) {
- rgblight_mode(1);
+ rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_MODE_BREATHE:
+ #ifdef RGBLIGHT_EFFECT_BREATHING
if (record->event.pressed) {
- if ((2 <= rgblight_get_mode()) && (rgblight_get_mode() < 5)) {
+ if ((RGBLIGHT_MODE_BREATHING <= rgblight_get_mode()) &&
+ (rgblight_get_mode() < RGBLIGHT_MODE_BREATHING_end)) {
rgblight_step();
} else {
- rgblight_mode(2);
+ rgblight_mode(RGBLIGHT_MODE_BREATHING);
}
}
+ #endif
return false;
case RGB_MODE_RAINBOW:
+ #ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD
if (record->event.pressed) {
- if ((6 <= rgblight_get_mode()) && (rgblight_get_mode() < 8)) {
+ if ((RGBLIGHT_MODE_RAINBOW_MOOD <= rgblight_get_mode()) &&
+ (rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_MOOD_end)) {
rgblight_step();
} else {
- rgblight_mode(6);
+ rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD);
}
}
+ #endif
return false;
case RGB_MODE_SWIRL:
+ #ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL
if (record->event.pressed) {
- if ((9 <= rgblight_get_mode()) && (rgblight_get_mode() < 14)) {
+ if ((RGBLIGHT_MODE_RAINBOW_SWIRL <= rgblight_get_mode()) &&
+ (rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_SWIRL_end)) {
rgblight_step();
} else {
- rgblight_mode(9);
+ rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL);
}
}
+ #endif
return false;
case RGB_MODE_SNAKE:
+ #ifdef RGBLIGHT_EFFECT_SNAKE
if (record->event.pressed) {
- if ((15 <= rgblight_get_mode()) && (rgblight_get_mode() < 20)) {
+ if ((RGBLIGHT_MODE_SNAKE <= rgblight_get_mode()) &&
+ (rgblight_get_mode() < RGBLIGHT_MODE_SNAKE_end)) {
rgblight_step();
} else {
- rgblight_mode(15);
+ rgblight_mode(RGBLIGHT_MODE_SNAKE);
}
}
+ #endif
return false;
case RGB_MODE_KNIGHT:
+ #ifdef RGBLIGHT_EFFECT_KNIGHT
if (record->event.pressed) {
- if ((21 <= rgblight_get_mode()) && (rgblight_get_mode() < 23)) {
+ if ((RGBLIGHT_MODE_KNIGHT <= rgblight_get_mode()) &&
+ (rgblight_get_mode() < RGBLIGHT_MODE_KNIGHT_end)) {
rgblight_step();
} else {
- rgblight_mode(21);
+ rgblight_mode(RGBLIGHT_MODE_KNIGHT);
}
}
+ #endif
return false;
case RGB_MODE_XMAS:
+ #ifdef RGBLIGHT_EFFECT_CHRISTMAS
if (record->event.pressed) {
- rgblight_mode(24);
+ rgblight_mode(RGBLIGHT_MODE_CHRISTMAS);
}
+ #endif
return false;
case RGB_MODE_GRADIENT:
+ #ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
if (record->event.pressed) {
- if ((25 <= rgblight_get_mode()) && (rgblight_get_mode() < 34)) {
+ if ((RGBLIGHT_MODE_STATIC_GRADIENT <= rgblight_get_mode()) &&
+ (rgblight_get_mode() < RGBLIGHT_MODE_STATIC_GRADIENT_end)) {
rgblight_step();
} else {
- rgblight_mode(25);
+ rgblight_mode(RGBLIGHT_MODE_STATIC_GRADIENT);
}
}
+ #endif
return false;
+ case RGB_MODE_RGBTEST:
+ #ifdef RGBLIGHT_EFFECT_RGB_TEST
+ if (record->event.pressed) {
+ rgblight_mode(RGBLIGHT_MODE_RGB_TEST);
+ }
#endif
+ return false;
+ #endif // defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
#ifdef PROTOCOL_LUFA
case OUT_AUTO:
if (record->event.pressed) {
default_layer_set(1U<<default_layer);
}
+uint32_t update_tri_layer_state(uint32_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+ uint32_t mask12 = (1UL << layer1) | (1UL << layer2);
+ uint32_t mask3 = 1UL << layer3;
+ return (state & mask12) == mask12 ? (state | mask3) : (state & ~mask3);
+}
+
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
- if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
- layer_on(layer3);
- } else {
- layer_off(layer3);
- }
+ layer_state_set(update_tri_layer_state(layer_state, layer1, layer2, layer3));
}
void tap_random_base64(void) {
#ifdef AUDIO_ENABLE
audio_init();
#endif
+ #ifdef RGB_MATRIX_ENABLE
+ rgb_matrix_init();
+ #endif
matrix_init_kb();
}
+uint8_t rgb_matrix_task_counter = 0;
+
+#ifndef RGB_MATRIX_SKIP_FRAMES
+ #define RGB_MATRIX_SKIP_FRAMES 1
+#endif
+
void matrix_scan_quantum() {
- #if defined(AUDIO_ENABLE)
+ #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE)
matrix_scan_music();
#endif
backlight_task();
#endif
+ #ifdef RGB_MATRIX_ENABLE
+ rgb_matrix_task();
+ if (rgb_matrix_task_counter == 0) {
+ rgb_matrix_update_pwm_buffers();
+ }
+ rgb_matrix_task_counter = ((rgb_matrix_task_counter + 1) % (RGB_MATRIX_SKIP_FRAMES + 1));
+ #endif
+
matrix_scan_kb();
}
-
#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN)
static const uint8_t backlight_pin = BACKLIGHT_PIN;
// depending on the pin, we use a different output compare unit
#if BACKLIGHT_PIN == B7
-# define COM1x1 COM1C1
-# define OCR1x OCR1C
+# define TCCRxA TCCR1A
+# define TCCRxB TCCR1B
+# define COMxx1 COM1C1
+# define OCRxx OCR1C
+# define ICRx ICR1
#elif BACKLIGHT_PIN == B6
-# define COM1x1 COM1B1
-# define OCR1x OCR1B
+# define TCCRxA TCCR1A
+# define TCCRxB TCCR1B
+# define COMxx1 COM1B1
+# define OCRxx OCR1B
+# define ICRx ICR1
#elif BACKLIGHT_PIN == B5
-# define COM1x1 COM1A1
-# define OCR1x OCR1A
+# define TCCRxA TCCR1A
+# define TCCRxB TCCR1B
+# define COMxx1 COM1A1
+# define OCRxx OCR1A
+# define ICRx ICR1
+#elif BACKLIGHT_PIN == C6
+# define TCCRxA TCCR3A
+# define TCCRxB TCCR3B
+# define COMxx1 COM1A1
+# define OCRxx OCR3A
+# define ICRx ICR3
#else
# define NO_HARDWARE_PWM
#endif
// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
static inline void set_pwm(uint16_t val) {
- OCR1x = val;
+ OCRxx = val;
}
#ifndef BACKLIGHT_CUSTOM_DRIVER
if (level == 0) {
// Turn off PWM control on backlight pin
- TCCR1A &= ~(_BV(COM1x1));
+ TCCRxA &= ~(_BV(COMxx1));
} else {
// Turn on PWM control of backlight pin
- TCCR1A |= _BV(COM1x1);
+ TCCRxA |= _BV(COMxx1);
}
// Set the brightness
set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS));
"In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]."
"In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)."
*/
-
- TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
- TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+ TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010;
+ TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
// Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
- ICR1 = TIMER_TOP;
+ ICRx = TIMER_TOP;
backlight_init();
#ifdef BACKLIGHT_BREATHING
#endif // backlight
+#ifdef HD44780_ENABLED
+#include "hd44780.h"
+#endif
+
// Functions for spitting out values
//
projects / qmk_firmware.git / blobdiff