*/
#if RGB_BACKLIGHT_ENABLED
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A)
+#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B)
#else
-#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A
+#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B
#endif
-#include "zeal60.h"
+#include "quantum.h"
#include "rgb_backlight.h"
#include "rgb_backlight_api.h"
#include "rgb_backlight_keycodes.h"
#include "quantum/color.h"
#include "drivers/avr/i2c_master.h"
+
+#if defined (RGB_BACKLIGHT_M6_B)
+#include "drivers/issi/is31fl3218.h"
+#define BACKLIGHT_LED_COUNT 6
+#else
#include "drivers/issi/is31fl3731.h"
+#define BACKLIGHT_LED_COUNT 72
+#endif
#define BACKLIGHT_EFFECT_MAX 10
uint32_t g_tick = 0;
// Ticks since this key was last hit.
-uint8_t g_key_hit[72];
+uint8_t g_key_hit[BACKLIGHT_LED_COUNT];
// Ticks since any key was last hit.
uint32_t g_any_key_hit = 0;
+#if !defined(RGB_BACKLIGHT_M6_B)
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
#define ISSI_ADDR_1 0x74
{1, C9_16, C7_15, C6_15}, // LD16
{1, C8_16, C7_16, C6_16}, // LD17
};
-
+#endif // !defined(RGB_BACKLIGHT_M6_B)
typedef struct Point {
// point values in range x=0..224 y=0..64
// origin is center of top-left key (i.e Esc)
#if defined (RGB_BACKLIGHT_ZEAL65)
-const Point g_map_led_to_point[72] PROGMEM = {
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
// LA0..LA17
{120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
{128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
{124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
{116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64}
};
-const Point g_map_led_to_point_polar[72] PROGMEM = {
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
// LA0..LA17
{64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,247},
{61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
{189,128}, {200,131}, {210,141}, {218,159}, {201,228}, {201,228}, {206,255}, {213,255}, {218,255}
};
#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
-const Point g_map_led_to_point[72] PROGMEM = {
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
// LA0..LA17
{120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
{128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
{124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48},
{116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64}
};
-const Point g_map_led_to_point_polar[72] PROGMEM = {
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
// LA0..LA17
{58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255},
{64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
{0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
{195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
};
+#elif defined (RGB_BACKLIGHT_M6_B)
+// M6-B is really simple:
+// 0 3 5
+// 1 2 4
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
+};
#endif
// This may seem counter-intuitive, but it's quite flexible.
point->x = pgm_read_byte(addr);
point->y = pgm_read_byte(addr+1);
+#if defined (RGB_BACKLIGHT_M6_B)
+ return;
+#endif
+
switch (index)
{
case 18+4: // LB4A
if ( g_config.use_split_backspace )
point->x -= 8;
break;
+#if defined (RGB_BACKLIGHT_ZEAL60)
case 18+14: // LB14A
if ( g_config.use_iso_enter )
point->y += 8; // extremely pedantic
break;
+ case 54+5: // LD5A
+ if ( !g_config.use_iso_enter )
+ point->x -= 10;
+ break;
+ case 36+16: // LC16A
+ if ( !g_config.use_split_left_shift )
+ point->x += 8;
+ break;
+#endif
#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
case 36+0: // LC0A
if ( g_config.use_7u_spacebar )
if ( g_config.use_7u_spacebar )
point->x += 4;
break;
-#endif
- case 36+16: // LC16A
- if ( !g_config.use_split_left_shift )
- point->x += 8;
- break;
- case 54+5: // LD5A
- if ( !g_config.use_iso_enter )
- point->x -= 10;
- break;
case 54+7: // LD7A
if ( !g_config.use_split_right_shift )
point->x -= 8;
break;
+#endif
}
}
{ 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
{ 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
};
+#elif defined (RGB_BACKLIGHT_M6_B)
+// M6-B is really simple:
+// 0 3 5
+// 1 2 4
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 0, 3, 5, 1, 2, 4 }
+};
#endif
void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led )
void backlight_update_pwm_buffers(void)
{
+#if defined (RGB_BACKLIGHT_M6_B)
+ IS31FL3218_update_pwm_buffers();
+#else
IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+#endif
}
void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
{
+#if defined (RGB_BACKLIGHT_M6_B)
+ IS31FL3218_set_color( index, red, green, blue );
+#else
IS31FL3731_set_color( index, red, green, blue );
+#endif
}
void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
{
+#if defined (RGB_BACKLIGHT_M6_B)
+ IS31FL3218_set_color_all( red, green, blue );
+#else
IS31FL3731_set_color_all( red, green, blue );
+#endif
}
void backlight_set_key_hit(uint8_t row, uint8_t column)
}
}
+#if defined(RGB_DEBUGGING_ONLY)
// This tests the LEDs
// Note that it will change the LED control registers
// in the LED drivers, and leave them in an invalid
backlight_set_color_all( 255, 255, 255 );
backlight_test_led( led, color==0, color==1, color==2 );
}
+#endif // defined(RGB_DEBUGGING_ONLY)
// All LEDs off
void backlight_effect_all_off(void)
{
uint8_t index;
map_row_column_to_led( row, column, &index );
- if ( index < 72 )
+ if ( index < BACKLIGHT_LED_COUNT )
{
if ( ( g_config.alphas_mods[row] & (1<<column) ) == 0 )
{
HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
RGB rgb;
Point point;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
map_led_to_point( i, &point );
// The y range will be 0..64, map this to 0..4
RGB rgb;
// Change one LED every tick
- uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 72 : 255;
+ uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
// If initialize, all get set to random colors
// If not, all but one will stay the same as before.
uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
// Relies on hue being 8-bit and wrapping
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
uint16_t offset2 = g_key_hit[i]<<2;
// stabilizer LEDs use spacebar hits
HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
RGB rgb;
Point point;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
uint16_t offset2 = g_key_hit[i]<<2;
// stabilizer LEDs use spacebar hits
HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
RGB rgb;
Point point;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
uint16_t offset2 = g_key_hit[i]<<2;
// stabilizer LEDs use spacebar hits
RGB rgb;
// Change one LED every tick
- uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % 72 : 255;
+ uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
// If initialize, all get set to random colors
// If not, all but one will stay the same as before.
HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
RGB rgb;
Point point;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
map_led_to_point_polar( i, &point );
// Relies on hue being 8-bit and wrapping
HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness };
RGB rgb;
Point point;
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
map_led_to_point_polar( i, &point );
uint8_t offset2 = offset + point.x;
g_any_key_hit++;
}
- for ( int led = 0; led < 72; led++ )
+ for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ )
{
if ( g_key_hit[led] < 255 )
{
if ( ! suspend_backlight )
{
+#if !defined(RGB_BACKLIGHT_M6_B)
backlight_effect_indicators();
+#endif
}
}
{
// Initialize I2C
i2c_init();
+
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_init();
+#else
IS31FL3731_init( ISSI_ADDR_1 );
IS31FL3731_init( ISSI_ADDR_2 );
- for ( int index = 0; index < 72; index++ )
+ for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ )
{
// OR the possible "disabled" cases together, then NOT the result to get the enabled state
// LC6 LD13 not present on Zeal65
#if defined (RGB_BACKLIGHT_ZEAL65)
bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
- ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15
- ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8
( index == 36+6 ) || // LC6
( index == 54+13 ) ); // LD13
#elif defined (RGB_BACKLIGHT_M60_A)
}
// This actually updates the LED drivers
IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+#endif // !defined(RGB_BACKLIGHT_M6_B)
// TODO: put the 1 second startup delay here?
// clear the key hits
- for ( int led=0; led<72; led++ )
+ for ( int led=0; led<BACKLIGHT_LED_COUNT; led++ )
{
g_key_hit[led] = 255;
}
backlight_config_save();
}
+#if defined(RGB_DEBUGGING_ONLY)
void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
{
- for ( int i=0; i<72; i++ )
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
{
if ( i == index )
{
}
}
}
+#endif // defined(RGB_DEBUGGING_ONLY)
void backlight_debug_led( bool state )
{
projects / qmk_firmware.git / blobdiff