#include "quantum.h"
#include "keyboards/wilba_tech/wt_mono_backlight.h"
+#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
+#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+
+#include "raw_hid.h"
+#include "dynamic_keymap.h"
+#include "timer.h"
+#include "tmk_core/common/eeprom.h"
+
+bool eeprom_is_valid(void)
+{
+ return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC &&
+ eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION);
+}
+
+void eeprom_set_valid(bool valid)
+{
+ eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF);
+ eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF);
+}
+
+void eeprom_reset(void)
+{
+ // Set the Zeal60 specific EEPROM state as invalid.
+ eeprom_set_valid(false);
+ // Set the TMK/QMK EEPROM state as invalid.
+ eeconfig_disable();
+}
+
+#ifdef RAW_ENABLE
+
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+ uint8_t *command_id = &(data[0]);
+ uint8_t *command_data = &(data[1]);
+ switch ( *command_id )
+ {
+ case id_get_protocol_version:
+ {
+ command_data[0] = PROTOCOL_VERSION >> 8;
+ command_data[1] = PROTOCOL_VERSION & 0xFF;
+ break;
+ }
+ case id_get_keyboard_value:
+ {
+ if ( command_data[0] == id_uptime )
+ {
+ uint32_t value = timer_read32();
+ command_data[1] = (value >> 24 ) & 0xFF;
+ command_data[2] = (value >> 16 ) & 0xFF;
+ command_data[3] = (value >> 8 ) & 0xFF;
+ command_data[4] = value & 0xFF;
+ }
+ else
+ {
+ *command_id = id_unhandled;
+ }
+ break;
+ }
+#ifdef DYNAMIC_KEYMAP_ENABLE
+ case id_dynamic_keymap_get_keycode:
+ {
+ uint16_t keycode = dynamic_keymap_get_keycode( command_data[0], command_data[1], command_data[2] );
+ command_data[3] = keycode >> 8;
+ command_data[4] = keycode & 0xFF;
+ break;
+ }
+ case id_dynamic_keymap_set_keycode:
+ {
+ dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
+ break;
+ }
+ case id_dynamic_keymap_reset:
+ {
+ dynamic_keymap_reset();
+ break;
+ }
+ case id_dynamic_keymap_macro_get_count:
+ {
+ command_data[0] = dynamic_keymap_macro_get_count();
+ break;
+ }
+ case id_dynamic_keymap_macro_get_buffer_size:
+ {
+ uint16_t size = dynamic_keymap_macro_get_buffer_size();
+ command_data[0] = size >> 8;
+ command_data[1] = size & 0xFF;
+ break;
+ }
+ case id_dynamic_keymap_macro_get_buffer:
+ {
+ uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
+ uint16_t size = command_data[2]; // size <= 28
+ dynamic_keymap_macro_get_buffer( offset, size, &command_data[3] );
+ break;
+ }
+ case id_dynamic_keymap_macro_set_buffer:
+ {
+ uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
+ uint16_t size = command_data[2]; // size <= 28
+ dynamic_keymap_macro_set_buffer( offset, size, &command_data[3] );
+ break;
+ }
+ case id_dynamic_keymap_macro_reset:
+ {
+ dynamic_keymap_macro_reset();
+ break;
+ }
+ case id_dynamic_keymap_get_layer_count:
+ {
+ command_data[0] = dynamic_keymap_get_layer_count();
+ break;
+ }
+ case id_dynamic_keymap_get_buffer:
+ {
+ uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
+ uint16_t size = command_data[2]; // size <= 28
+ dynamic_keymap_get_buffer( offset, size, &command_data[3] );
+ break;
+ }
+ case id_dynamic_keymap_set_buffer:
+ {
+ uint16_t offset = ( command_data[0] << 8 ) | command_data[1];
+ uint16_t size = command_data[2]; // size <= 28
+ dynamic_keymap_set_buffer( offset, size, &command_data[3] );
+ break;
+ }
+#endif // DYNAMIC_KEYMAP_ENABLE
+ case id_eeprom_reset:
+ {
+ eeprom_reset();
+ break;
+ }
+ case id_bootloader_jump:
+ {
+ // Need to send data back before the jump
+ // Informs host that the command is handled
+ raw_hid_send( data, length );
+ // Give host time to read it
+ wait_ms(100);
+ bootloader_jump();
+ break;
+ }
+ default:
+ {
+ // Unhandled message.
+ *command_id = id_unhandled;
+ break;
+ }
+ }
+
+ // Return same buffer with values changed
+ raw_hid_send( data, length );
+
+}
+
+#endif
+
+void main_init(void)
+{
+ // If the EEPROM has the magic, the data is good.
+ // OK to load from EEPROM.
+ if (eeprom_is_valid()) {
+ //backlight_config_load();
+ } else {
+ // If the EEPROM has not been saved before, or is out of date,
+ // save the default values to the EEPROM. Default values
+ // come from construction of the zeal_backlight_config instance.
+ //backlight_config_save();
+#ifdef DYNAMIC_KEYMAP_ENABLE
+ // This resets the keymaps in EEPROM to what is in flash.
+ dynamic_keymap_reset();
+ // This resets the macros in EEPROM to nothing.
+ dynamic_keymap_macro_reset();
+#endif
+ // Save the magic number last, in case saving was interrupted
+ eeprom_set_valid(true);
+ }
+
+ // Initialize LED drivers for backlight.
+ backlight_init_drivers();
+
+ backlight_timer_init();
+ backlight_timer_enable();
+}
void bootmagic_lite(void)
{
// If the Esc (matrix 0,0) is held down on power up,
// reset the EEPROM valid state and jump to bootloader.
if ( matrix_get_row(0) & (1<<0) ) {
- // Set the TMK/QMK EEPROM state as invalid.
- eeconfig_disable();
- // Jump to bootloader.
+ eeprom_reset();
bootloader_jump();
}
}
void matrix_init_kb(void)
{
bootmagic_lite();
- backlight_init_drivers();
- backlight_timer_init();
- backlight_timer_enable();
+ main_init();
matrix_init_user();
}
void matrix_scan_kb(void)
{
+ // This only updates the LED driver buffers if something has changed.
backlight_update_pwm_buffers();
matrix_scan_user();
}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record)
+{
+ switch(keycode) {
+ case FN_MO13:
+ if (record->event.pressed) {
+ layer_on(1);
+ update_tri_layer(1, 2, 3);
+ } else {
+ layer_off(1);
+ update_tri_layer(1, 2, 3);
+ }
+ return false;
+ break;
+ case FN_MO23:
+ if (record->event.pressed) {
+ layer_on(2);
+ update_tri_layer(1, 2, 3);
+ } else {
+ layer_off(2);
+ update_tri_layer(1, 2, 3);
+ }
+ return false;
+ break;
+ }
+
+#ifdef DYNAMIC_KEYMAP_ENABLE
+ // Handle macros
+ if (record->event.pressed) {
+ if ( keycode >= MACRO00 && keycode <= MACRO15 )
+ {
+ uint8_t id = keycode - MACRO00;
+ dynamic_keymap_macro_send(id);
+ return false;
+ }
+ }
+#endif //DYNAMIC_KEYMAP_ENABLE
+
+ return process_record_user(keycode, record);
+}
projects / qmk_firmware.git / blobdiff