Fix location of where the make command should be run

[qmk_firmware.git] / keyboards / nyquist / readme.md

diff --git a/keyboards/nyquist/readme.md b/keyboards/nyquist/readme.md
index c70bf02576566b7670b7069e45860ee8c39989ba..61b9317d5239574953d14866da1717459f122f29 100644 (file)
--- a/keyboards/nyquist/readme.md
+++ b/keyboards/nyquist/readme.md
@@ -6,6 +6,8 @@ The Nyquist is a 60% split ortholinear board by [Keebio](https://keeb.io). It ha
 
 ## Build Guide
 
+A build log of the Nyquist can be found here: [Nyquist Build Log](http://imgur.com/a/dD4sX).
+
 Since the design is very similar to the Let's Split v2, the build guide for that can be used while the build guide for the Nyquist is being fully developed. A build guide for putting together the Let's Split v2 can be found here: [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide)
 
 There is additional information there about flashing and adding RGB underglow.
@@ -98,7 +100,7 @@ unnecessary in simple use cases.
 
 Flashing
 -------
-From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+From the `nyquist` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
 Example: `make rev1-serial-avrdude`