Remove commented out MCUs in rules.mk (#5884)

[qmk_firmware.git] / keyboards / hhkb / rules.mk

diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk
index e4190039f7ee569e1141373856f7c07851e01909..0483a2a8784495882da73d8f7d36669a902d03f5 100644 (file)
--- a/keyboards/hhkb/rules.mk
+++ b/keyboards/hhkb/rules.mk
@@ -4,7 +4,6 @@
 SRC = matrix.c
 
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -58,23 +57,53 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes  # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes   # Console for debug(+400)
-COMMAND_ENABLE ?= yes   # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes    # Custom matrix file for the HHKB
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
+CONSOLE_ENABLE = yes   # Console for debug(+400)
+COMMAND_ENABLE = yes   # Commands for debug and configuration
+CUSTOM_MATRIX = yes    # Custom matrix file for the HHKB
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= yes       # MIDI controls
-# UNICODE_ENABLE ?= yes    # Unicode
-# BLUETOOTH_ENABLE ?= yes  # Enable Bluetooth with the Adafruit EZ-Key HID
-
-debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
-debug-on: all
-
-debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
-debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
-debug-off: all
+# SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+# MIDI_ENABLE = yes       # MIDI controls
+# UNICODE_ENABLE = yes    # Unicode
+# BLUETOOTH_ENABLE = yes  # Enable Bluetooth with the Adafruit EZ-Key HID
+
+
+# HHKB_RN42_ENABLE = yes  # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree.
+
+# Either uncomment the HHKB_RN42_ENABLE line above, or run make enabling the
+# feature. Be sure to clean any existing build before trying to enable rn42
+# support. For example:
+#
+# make hhkb-keymap-clean
+# make hhkb-keymap-dfu HHKB_RN42_ENABLE=yes
+
+ifeq ($(strip $(HHKB_RN42_ENABLE)), yes)
+
+OPT_DEFS += -DHHKB_RN42_ENABLE
+
+# Support for the RN42 Bluetooth module. This is the BT module in Hasu's BT
+# HHKB Alt controller.
+RN42_DIR = rn42
+
+SRC +=  serial_uart.c \
+       rn42/suart.S \
+       rn42/rn42.c \
+       rn42/rn42_task.c \
+       rn42/battery.c \
+       rn42/main.c
+
+VPATH += $(RN42_DIR)
+
+endif
+
+
+# debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
+# debug-on: all
+
+# debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
+# debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
+# debug-off: all