-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-# TARGET ?= usb_usb
-
-# TMK_DIR ?= ../../tmk_core
-
-# Directory keyboard dependent files exist
-# TARGET_DIR ?= .
-
# MCU name
-MCU ?= atmega32u4
+MCU = atmega32u4
# Processor frequency.
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
-F_CPU ?= 8000000
+# Since there are different hardware variations of these adapters and since these
+# have different CPU clocks, the clock speed should be set in the rules.mk file of the
+# respective hardware variantion (i.e. subproject). For example, in /pro_micro/rules.mk
+# this is set to 8000000.
+# The value here is only a fallback and is ignored if it is defined in the subproject.
+F_CPU ?= 16000000
+
+DEFAULT_FOLDER = converter/usb_usb/hasu
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
-ARCH ?= AVR8
+ARCH = AVR8
+
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB ?= $(F_CPU)
+F_USB = $(F_CPU)
+
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Build Options
-# comment out to disable the options.
-#
-#MOUSEKEY_ENABLE ?= yes # Mouse keys
-EXTRAKEY_ENABLE ?= yes # Media control and System control
-# CONSOLE_ENABLE ?= yes # Console for debug
-CONSOLE_ENABLE ?= no # Console for debug
-#COMMAND_ENABLE ?= yes # Commands for debug and configuration
-#NKRO_ENABLE ?= yes # USB Nkey Rollover
-
-# Boot Section Size in bytes
+# Boot Section Size in *bytes*
# Teensy halfKay 512
+# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
+# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
-#LDFLAGS += -Wl,--relax
-
-#OPT_DEFS += -DNO_ACTION_TAPPING
-#OPT_DEFS += -DNO_ACTION_LAYER
-#OPT_DEFS += -DNO_ACTION_MACRO
-CUSTOM_MATRIX = yes
-
-SRC = matrix.cpp
-
-#
-# Keymap file
+# Build Options
+# comment out to disable the options.
#
-# ifeq (yes,$(strip $(UNIMAP_ENABLE)))
-# KEYMAP_FILE = unimap
-# else
-# ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
-# KEYMAP_FILE = actionmap
-# else
-# KEYMAP_FILE = keymap
-# endif
-# endif
-# ifdef KEYMAP
-# SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
-# else
-# SRC := $(KEYMAP_FILE).c $(SRC)
-# endif
+# BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+# CONSOLE_ENABLE = yes # Console for debug(+400)
+# COMMAND_ENABLE = yes # Commands for debug and configuration
+# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+# BACKLIGHT_ENABLE = yes
+USB_HID_ENABLE = yes
-# CONFIG_H ?= config.h
-
-
-
-# Search Path
-# VPATH += $(TARGET_DIR)
-# VPATH += $(TMK_DIR)
-
-
-
-# program Leonardo
-# PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -b57600 -Uflash:w:$(TARGET).hex -P$(DEV)
-
-
-
-include $(TMK_DIR)/protocol/usb_hid.mk
-# include $(TMK_DIR)/protocol/lufa.mk
-# include $(TMK_DIR)/common.mk
-# include $(TMK_DIR)/rules.mk
+CUSTOM_MATRIX = yes
+SRC = custom_matrix.cpp
\ No newline at end of file
projects / qmk_firmware.git / blobdiff