$ sudo make <keyboard>:<keymap>:dfu
-Note that running `make` with `sudo` is generally *not* a good idea, and you should use one of the former methods, if possible.
+Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
### Linux `udev` Rules
On Linux, you'll need proper privileges to access the MCU. You can either use
# tmk keyboard products https://github.com/tmk/tmk_keyboard
SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
```
+**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+
+```
+# Input Club keyboard bootloader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
+```
+
+### Serial device is not detected in bootloader mode on Linux
+Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
+Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
## Unknown Device for DFU Bootloader
-If you're using Windows to flash your keyboard, and you are running into issues, check the Device Manager. If you see an "Unknown Device" when the keyboard is in "bootloader mode", then you may have a driver issue.
+Issues encountered when flashing keyboards on Windows are most often due to having the wrong drivers installed for the bootloader.
+
+Re-running the installation script for MSYS2 may help (eg run `util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue. Alternatively, you can download and run the [`qmk_driver_installer`](https://github.com/qmk/qmk_driver_installer) package.
-Re-running the installation script for MSYS2 may help (eg run `./util/qmk_install.sh` from MSYS2/WSL) or reinstalling the QMK Toolbox may fix the issue.
+If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, and run it on the system. Then, you will need to reset your board into bootloader mode. After that, locate the device in question. If the device doesn't show up in the list (or nothing shows up in the list), you may need to enable the `List all devices` option in the `Options` menu.
+
+From here, you will need to know what type of controller the board is using. You may see it listed in the Device Manager as `ATmega32U4` device (which is an AVR board), or an `STM32` device (Which is an ARM board). For AVR boards, use `libusb-win32` for the driver. For ARM boards, use the `WinUSB` driver. Once the correct driver type has been selected, click on the `Replace Driver` button, unplug your board, plug it back in, and reset it again.
-If that doesn't work, then you may need to grab the [Zadig Utility](https://zadig.akeo.ie/). Download this, find the device in question, and select the `WinUS(libusb-1.0)` option, and hit "Reinstall driver". Once you've done that, try flashing your board, again.
## WINAVR is Obsolete
It is no longer recommended and may cause some problem.
```
## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
-This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
+This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
-The solution is to remove and reinstall all affected modules.
+The solution is to remove and reinstall all affected modules.
```
brew rm avr-gcc
brew rm dfu-programmer
+brew rm dfu-util
brew rm gcc-arm-none-eabi
brew rm avrdude
brew install avr-gcc
brew install dfu-programmer
+brew install dfu-util
brew install gcc-arm-none-eabi
brew install avrdude
```
```
brew uninstall --force avr-gcc
-brew install avr-gcc@7
-brew link avr-gcc@7
+brew install avr-gcc@8
+brew link --force avr-gcc@8
```
+
+### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
+Due to how EEPROM works on ARM based chips, saved settings may no longer be valid. This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable. Resetting the EEPROM will correct this.
+
+[Planck rev6 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) can be used to force an eeprom reset. After flashing this image, flash your normal firmware again which should restore your keyboard to _normal_ working order.
+[Preonic rev3 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin)
+
+If bootmagic is enabled in any form, you should be able to do this too (see [Bootmagic docs](feature_bootmagic.md) and keyboard info for specifics on how to do this).
projects / qmk_firmware.git / blobdiff