+# Determine what keyboard we are building and setup the build environment.
+#
+# We support folders up to 5 levels deep below `keyboards/`. This file is
+# responsible for determining which folder is being used and doing the
+# corresponding environment setup.
+
ifndef VERBOSE
.SILENT:
endif
include common.mk
-ifneq ($(SUBPROJECT),)
- TARGET ?= $(KEYBOARD)_$(SUBPROJECT)_$(KEYMAP)
- KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)_$(SUBPROJECT)
-else
- TARGET ?= $(KEYBOARD)_$(KEYMAP)
- KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)
-endif
+# Set the filename for the final firmware binary
+KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
+TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
+KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
# Force expansion
TARGET := $(TARGET)
-
+# For split boards we need to set a master half.
MASTER ?= left
ifdef master
MASTER = $(master)
endif
endif
-KEYBOARD_PATH := keyboards/$(KEYBOARD)
-KEYBOARD_C := $(KEYBOARD_PATH)/$(KEYBOARD).c
+ifdef SKIP_VERSION
+ OPT_DEFS += -DSKIP_VERSION
+endif
-ifneq ("$(wildcard $(KEYBOARD_C))","")
- include $(KEYBOARD_PATH)/rules.mk
-else
- $(error "$(KEYBOARD_C)" does not exist)
+# Determine which subfolders exist.
+KEYBOARD_FOLDER_PATH_1 := $(KEYBOARD)
+KEYBOARD_FOLDER_PATH_2 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_1)))
+KEYBOARD_FOLDER_PATH_3 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_2)))
+KEYBOARD_FOLDER_PATH_4 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_3)))
+KEYBOARD_FOLDER_PATH_5 := $(patsubst %/,%,$(dir $(KEYBOARD_FOLDER_PATH_4)))
+KEYBOARD_FOLDER_1 := $(notdir $(KEYBOARD_FOLDER_PATH_1))
+KEYBOARD_FOLDER_2 := $(notdir $(KEYBOARD_FOLDER_PATH_2))
+KEYBOARD_FOLDER_3 := $(notdir $(KEYBOARD_FOLDER_PATH_3))
+KEYBOARD_FOLDER_4 := $(notdir $(KEYBOARD_FOLDER_PATH_4))
+KEYBOARD_FOLDER_5 := $(notdir $(KEYBOARD_FOLDER_PATH_5))
+KEYBOARD_PATHS :=
+KEYBOARD_PATH_1 := keyboards/$(KEYBOARD_FOLDER_PATH_1)
+KEYBOARD_PATH_2 := keyboards/$(KEYBOARD_FOLDER_PATH_2)
+KEYBOARD_PATH_3 := keyboards/$(KEYBOARD_FOLDER_PATH_3)
+KEYBOARD_PATH_4 := keyboards/$(KEYBOARD_FOLDER_PATH_4)
+KEYBOARD_PATH_5 := keyboards/$(KEYBOARD_FOLDER_PATH_5)
+
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
+ KEYBOARD_PATHS += $(KEYBOARD_PATH_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
+ KEYBOARD_PATHS += $(KEYBOARD_PATH_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
+ KEYBOARD_PATHS += $(KEYBOARD_PATH_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
+ KEYBOARD_PATHS += $(KEYBOARD_PATH_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
+ KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
endif
-OPT_DEFS += -DKEYBOARD_$(KEYBOARD)
-ifneq ($(SUBPROJECT),)
- SUBPROJECT_PATH := keyboards/$(KEYBOARD)/$(SUBPROJECT)
- SUBPROJECT_C := $(SUBPROJECT_PATH)/$(SUBPROJECT).c
- ifneq ("$(wildcard $(SUBPROJECT_C))","")
- OPT_DEFS += -DSUBPROJECT_$(SUBPROJECT)
- include $(SUBPROJECT_PATH)/rules.mk
+
+# Pull in rules.mk files from all our subfolders
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
+ include $(KEYBOARD_PATH_5)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/rules.mk)","")
+ include $(KEYBOARD_PATH_4)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/rules.mk)","")
+ include $(KEYBOARD_PATH_3)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/rules.mk)","")
+ include $(KEYBOARD_PATH_2)/rules.mk
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
+ include $(KEYBOARD_PATH_1)/rules.mk
+endif
+
+
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+# Check for keymap.json first, so we can regenerate keymap.c
+include build_json.mk
+
+ifeq ("$(wildcard $(KEYMAP_PATH))", "")
+ # Look through the possible keymap folders until we find a matching keymap.c
+ ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+ else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+ -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+ KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+ KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+ else ifneq ($(LAYOUTS),)
+ # If we haven't found a keymap yet fall back to community layouts
+ include build_layout.mk
else
- $(error "$(SUBPROJECT_PATH)/$(SUBPROJECT).c" does not exist)
+ $(error Could not find keymap)
+ # this state should never be reached
endif
endif
-# We can assume a ChibiOS target When MCU_FAMILY is defined, since it's not used for LUFA
+ifeq ($(strip $(CTPC)), yes)
+ CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+ TARGET := $(TARGET)_proton_c
+ include $(STM32_PATH)/proton_c.mk
+ OPT_DEFS += -DCONVERT_TO_PROTON_C
+endif
+
+ifneq ($(FORCE_LAYOUT),)
+ TARGET := $(TARGET)_$(FORCE_LAYOUT)
+endif
+
+include quantum/mcu_selection.mk
+
ifdef MCU_FAMILY
+ OPT_DEFS += -DQMK_STM32
+ KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
+# Find all the C source files to be compiled in subfolders.
+KEYBOARD_SRC :=
+
+KEYBOARD_C_1 := $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).c
+KEYBOARD_C_2 := $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).c
+KEYBOARD_C_3 := $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).c
+KEYBOARD_C_4 := $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).c
+KEYBOARD_C_5 := $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).c
+
+ifneq ("$(wildcard $(KEYBOARD_C_5))","")
+ KEYBOARD_SRC += $(KEYBOARD_C_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_4))","")
+ KEYBOARD_SRC += $(KEYBOARD_C_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_3))","")
+ KEYBOARD_SRC += $(KEYBOARD_C_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_2))","")
+ KEYBOARD_SRC += $(KEYBOARD_C_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_C_1))","")
+ KEYBOARD_SRC += $(KEYBOARD_C_1)
+endif
+
+# Generate KEYBOARD_name_subname for all levels of the keyboard folder
+KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
+KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
+KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
+KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
+KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
+
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
+ OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
+ OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
+ OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
+ OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
+ OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
+endif
+
+# Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
+# that the same keymap may be used on multiple keyboards.
+#
+# We grab the most top-level include file that we can. That file should
+# use #ifdef statements to include all the neccesary subfolder includes,
+# as described here:
+#
+# https://docs.qmk.fm/#/feature_layouts?id=tips-for-making-layouts-keyboard-agnostic
+#
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/$(KEYBOARD_FOLDER_1).h)","")
+ QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_1).h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/$(KEYBOARD_FOLDER_2).h)","")
+ QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_2).h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/$(KEYBOARD_FOLDER_3).h)","")
+ QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_3).h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/$(KEYBOARD_FOLDER_4).h)","")
+ QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_4).h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/$(KEYBOARD_FOLDER_5).h)","")
+ QMK_KEYBOARD_H = $(KEYBOARD_FOLDER_5).h
+endif
+
+# Determine and set parameters based on the keyboard's processor family.
+# We can assume a ChibiOS target When MCU_FAMILY is defined since it's
+# not used for LUFA
+ifdef MCU_FAMILY
+ FIRMWARE_FORMAT?=bin
PLATFORM=CHIBIOS
+else ifdef ARM_ATSAM
+ PLATFORM=ARM_ATSAM
+ FIRMWARE_FORMAT=bin
else
PLATFORM=AVR
+ FIRMWARE_FORMAT?=hex
endif
ifeq ($(PLATFORM),CHIBIOS)
- include $(TMK_PATH)/protocol/chibios.mk
include $(TMK_PATH)/chibios.mk
OPT_OS = chibios
- ifneq ("$(wildcard $(SUBPROJECT_PATH)/bootloader_defs.h)","")
- OPT_DEFS += -include $(SUBPROJECT_PATH)/bootloader_defs.h
- else ifneq ("$(wildcard $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH)/bootloader_defs.h
- else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
- OPT_DEFS += -include $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h
+ ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_5)/boards/$(BOARD)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_4)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_4)/boards/$(BOARD)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_3)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_3)/boards/$(BOARD)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_2)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_2)/boards/$(BOARD)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
+ else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
+ else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
endif
endif
-CONFIG_H = $(KEYBOARD_PATH)/config.h
-ifneq ($(SUBPROJECT),)
- ifneq ("$(wildcard $(SUBPROJECT_C))","")
- CONFIG_H = $(SUBPROJECT_PATH)/config.h
- endif
+# Find all of the config.h files and add them to our CONFIG_H define.
+CONFIG_H :=
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/config.h)","")
+ CONFIG_H += $(KEYBOARD_PATH_5)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/config.h)","")
+ CONFIG_H += $(KEYBOARD_PATH_4)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/config.h)","")
+ CONFIG_H += $(KEYBOARD_PATH_3)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/config.h)","")
+ CONFIG_H += $(KEYBOARD_PATH_2)/config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/config.h)","")
+ CONFIG_H += $(KEYBOARD_PATH_1)/config.h
+endif
+
+POST_CONFIG_H :=
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_1)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_2)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_3)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_4)/post_config.h
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/post_config.h)","")
+ POST_CONFIG_H += $(KEYBOARD_PATH_5)/post_config.h
endif
# Save the defines and includes here, so we don't include any keymap specific ones
PROJECT_DEFS := $(OPT_DEFS)
-PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(SUBPROJECT_PATH) $(KEYBOARD_PATH)
+PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
PROJECT_CONFIG := $(CONFIG_H)
-MAIN_KEYMAP_PATH := $(KEYBOARD_PATH)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_C := $(MAIN_KEYMAP_PATH)/keymap.c
-SUBPROJ_KEYMAP_PATH := $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
-SUBPROJ_KEYMAP_C := $(SUBPROJ_KEYMAP_PATH)/keymap.c
-ifneq ("$(wildcard $(SUBPROJ_KEYMAP_C))","")
- -include $(SUBPROJ_KEYMAP_PATH)/Makefile
- KEYMAP_C := $(SUBPROJ_KEYMAP_C)
- KEYMAP_PATH := $(SUBPROJ_KEYMAP_PATH)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_C))","")
- -include $(MAIN_KEYMAP_PATH)/Makefile
- KEYMAP_C := $(MAIN_KEYMAP_C)
- KEYMAP_PATH := $(MAIN_KEYMAP_PATH)
-else ifneq ($(LAYOUTS),)
- include build_layout.mk
-else
- $(error Could not find keymap)
- # this state should never be reached
+# Userspace setup and definitions
+ifeq ("$(USER_NAME)","")
+ USER_NAME := $(KEYMAP)
+endif
+USER_PATH := users/$(USER_NAME)
+
+-include $(USER_PATH)/rules.mk
+ifneq ("$(wildcard $(USER_PATH)/config.h)","")
+ CONFIG_H += $(USER_PATH)/config.h
endif
# Object files directory
# this an empty or blank macro!
KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
-
ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","")
- CONFIG_H = $(KEYMAP_PATH)/config.h
+ CONFIG_H += $(KEYMAP_PATH)/config.h
endif
-# # project specific files
-SRC += $(KEYBOARD_C) \
+# project specific files
+SRC += $(KEYBOARD_SRC) \
$(KEYMAP_C) \
$(QUANTUM_SRC)
-ifneq ($(SUBPROJECT),)
- SRC += $(SUBPROJECT_C)
-endif
-
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
# Search Path
VPATH += $(KEYMAP_PATH)
-ifneq ($(SUBPROJECT),)
- VPATH += $(SUBPROJECT_PATH)
-endif
-VPATH += $(KEYBOARD_PATH)
+VPATH += $(USER_PATH)
+VPATH += $(KEYBOARD_PATHS)
VPATH += $(COMMON_VPATH)
include common_features.mk
include $(TMK_PATH)/protocol.mk
include $(TMK_PATH)/common.mk
+include bootloader.mk
+SRC += $(patsubst %.c,%.clib,$(LIB_SRC))
+SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC))
SRC += $(TMK_COMMON_SRC)
OPT_DEFS += $(TMK_COMMON_DEFS)
EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
include $(TMK_PATH)/avr.mk
endif
+ifeq ($(PLATFORM),ARM_ATSAM)
+ include $(TMK_PATH)/arm_atsam.mk
+ include $(TMK_PATH)/protocol/arm_atsam.mk
+endif
+
+ifeq ($(PLATFORM),CHIBIOS)
+ include $(TMK_PATH)/protocol/chibios.mk
+endif
+
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
include $(VISUALIZER_PATH)/visualizer.mk
endif
+CONFIG_H += $(POST_CONFIG_H)
+ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H)
+
OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
$(KEYMAP_OUTPUT)_SRC := $(SRC)
$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \
--DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(KEYBOARD).h\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH)/config.h\" \
+-DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" -DQMK_KEYBOARD_CONFIG_H=\"$(KEYBOARD_PATH_1)/config.h\" \
-DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \
--DQMK_SUBPROJECT=\"$(SUBPROJECT)\" -DQMK_SUBPROJECT_H=\"$(SUBPROJECT).h\" -DQMK_SUBPROJECT_CONFIG_H=\"$(SUBPROJECT_PATH)/config.h\"
+-DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H
$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS)
$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC)
$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS)
$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
-$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
+$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
# Default target.
-all: build sizeafter
-
-# Change the build target to build a HEX file or a library.
-build: elf hex
-#build: elf hex eep lss sym
-#build: lib
-
+all: build check-size
+build: elf cpfirmware
+check-size: build
+objs-size: build
+include show_options.mk
include $(TMK_PATH)/rules.mk
-
projects / qmk_firmware.git / blobdiff