F<file1.pl.bak> and F<file2.pl.bak>. If F<file1.pl.bak> and/or F<file2.pl.bak>
already exist, they will be overwritten.
+ perltidy -b -bext='/' file1.pl file2.pl
+
+ Same as the previous example except that the backup files F<file1.pl.bak> and F<file2.pl.bak> will be deleted if there are no errors.
+
perltidy -gnu somefile.pl
Execute perltidy on file F<somefile.pl> with a style which approximates the
before any files are processed. As a result, it does not matter
whether flags are before or after any filenames. However, the relative
order of parameters is important, with later parameters overriding the
- values of earlier parameters.
+ values of earlier parameters.
For each parameter, there is a long name and a short name. The short
names are convenient for keyboard input, while the long names are
Most parameters which serve as on/off flags can be negated with a
leading "n" (for the short name) or a leading "no" or "no-" (for the
- long name). For example, the flag to outdent long quotes is is B<-olq>
+ long name). For example, the flag to outdent long quotes is B<-olq>
or B<--outdent-long-quotes>. The flag to skip this is B<-nolq>
or B<--nooutdent-long-quotes> or B<--no-outdent-long-quotes>.
Name of the output file (only if a single input file is being
processed). If no output file is specified, and output is not
-redirected to the standard output, the output will go to F<filename.tdy>.
+redirected to the standard output (see B<-st>), the output will go to
+F<filename.tdy>. [Note: - does not redirect to standard output. Use
+B<-st> instead.]
=item B<-st>, B<--standard-output>
item for changing the default backup extension, and for eliminating the
backup file altogether.
- A B<-b> flag will be ignored if input is from standard input, or
- if the B<-html> flag is set.
+ A B<-b> flag will be ignored if input is from standard input or goes to
+ standard output, or if the B<-html> flag is set.
+
+ In particular, if you want to use both the B<-b> flag and the B<-pbp>
+ (--perl-best-practices) flag, then you must put a B<-nst> flag after the
+ B<-pbp> flag because it contains a B<-st> flag as one of its components,
+ which means that output will go to the standard output stream.
=item B<-bext>=ext, B<--backup-file-extension>=ext
L<Skipping Selected Sections of Code> for a way to avoid tidying specific
sections of code.
+ =item B<-i=n>, B<--indent-columns=n>
+
+ Use n columns per indentation level (default n=4).
+
=item B<-l=n>, B<--maximum-line-length=n>
The default maximum line length is n=80 characters. Perltidy will try
quotes and side comments may cause lines to exceed this length.
Setting B<-l=0> is equivalent to setting B<-l=(a large number)>.
- =item B<-i=n>, B<--indent-columns=n>
+ =item B<-vmll>, B<--variable-maximum-line-length>
- Use n columns per indentation level (default n=4).
+ A problem arises using a fixed maximum line length with very deeply nested code
+ and data structures because eventually the amount of leading whitespace used
+ for indicating indentation takes up most or all of the available line width,
+ leaving little or no space for the actual code or data. One solution is to use
+ a vary long line length. Another solution is to use the B<-vmll> flag, which
+ basically tells perltidy to ignore leading whitespace when measuring the line
+ length.
+
+ To be precise, when the B<-vmll> parameter is set, the maximum line length of a
+ line of code will be M+L*I, where
+
+ M is the value of --maximum-line-length=M (-l=M), default 80,
+ I is the value of --indent-columns=I (-i=I), default 4,
+ L is the indentation level of the line of code
+
+ When this flag is set, the choice of breakpoints for a block of code should be
+ essentially independent of its nesting depth. However, the absolute line
+ lengths, including leading whitespace, can still be arbitrarily large. This
+ problem can be avoided by including the next parameter.
+
+ The default is not to do this (B<-nvmll>).
+
+ =item B<-wc=n>, B<--whitespace-cycle=n>
+
+ This flag also addresses problems with very deeply nested code and data
+ structures. When the nesting depth exceeds the value B<n> the leading
+ whitespace will be reduced and start at a depth of 1 again. The result is that
+ blocks of code will shift back to the left rather than moving arbitrarily far
+ to the right. This occurs cyclically to any depth.
+
+ For example if one level of indentation equals 4 spaces (B<-i=4>, the default),
+ and one uses B<-wc=15>, then if the leading whitespace on a line exceeds about
+ 4*15=60 spaces it will be reduced back to 4*1=4 spaces and continue increasing
+ from there. If the whitespace never exceeds this limit the formatting remains
+ unchanged.
+
+ The combination of B<-vmll> and B<-wc=n> provides a solution to the problem of
+ displaying arbitrarily deep data structures and code in a finite window,
+ although B<-wc=n> may of course be used without B<-vmll>.
+
+ The default is not to use this, which can also be indicated using B<-wc=0>.
=item tabs
be issued and this flag will be unset. One example is the B<-lp>
option.
+ =item B<-dt=n>, B<--default-tabsize=n>
+
+ If the first line of code passed to perltidy contains leading tabs but no
+ tab scheme is specified for the output stream then perltidy must guess how many
+ spaces correspond to each leading tab. This number of spaces B<n>
+ corresponding to each leading tab of the input stream may be specified with
+ B<-dt=n>. The default is B<n=8>.
+
+ This flag has no effect if a tab scheme is specified for the output stream,
+ because then the input stream is assumed to use the same tab scheme and
+ indentation spaces as for the output stream (any other assumption would lead to
+ unstable editing).
+
=back
=item B<-syn>, B<--check-syntax>
beautified on check-in to a source code control system. It has been found to
be extremely rare for the output to change after 2 iterations. If a value
B<n> is greater than 2 is input then a convergence test will be used to stop
- the iterations as soon as possible, almost always after 2 iterations.
+ the iterations as soon as possible, almost always after 2 iterations. See
+ the next item for a simplified iteration control.
This flag has no effect when perltidy is used to generate html.
+ =item B<-conv>, B<--converge>
+
+ This flag is equivalent to B<-it=4> and is included to simplify iteration
+ control. For all practical purposes one either does or does not want to be
+ sure that the output is converged, and there is no penalty to using a large
+ iteration limit since perltidy will check for convergence and stop iterating as
+ soon as possible. The default is B<-nconv> (no convergence check). Using
+ B<-conv> will approximately double run time since normally one extra iteration
+ is required to verify convergence.
+
=back
=head2 Code Indentation Control
=item B<-okw>, B<--outdent-keywords>
- The command B<-okw> will will cause certain leading control keywords to
+ The command B<-okw> will cause certain leading control keywords to
be outdented by 2 spaces (or whatever B<-ci> has been set to), if
possible. By default, these keywords are C<redo>, C<next>, C<last>,
C<goto>, and C<return>. The intention is to make these control keywords
%bf = map { $_ => -M $_ } grep {/\.deb$/} dirents '.'; # -bbt=1
%bf = map {$_ => -M $_} grep {/\.deb$/} dirents '.'; # -bbt=2
+ To simplify input in the case that all of the tightness flags have the same
+ value <n>, the parameter <-act=n> or B<--all-containers-tightness=n> is an
+ abbreviation for the combination <-pt=n -sbt=n -bt=n -bbt=n>.
+
+
+ =item B<-tso>, B<--tight-secret-operators>
+
+ The flag B<-tso> causes certain perl token sequences (secret operators)
+ which might be considered to be a single operator to be formatted "tightly"
+ (without spaces). The operators currently modified by this flag are:
+
+ 0+ +0 ()x!! ~~<> ,=> =( )=
+
+ For example the sequence B<0 +>, which converts a string to a number,
+ would be formatted without a space: B<0+> when the B<-tso> flag is set. This
+ flag is off by default.
+
=item B<-sts>, B<--space-terminal-semicolon>
Some programmers prefer a space before all terminal semicolons. The
normally be necessary, but was added for testing purposes, because in
some versions of perl, trimming C<qw> quotes changes the syntax tree.
+ =item Trimming trailing whitespace from lines of POD
+
+ B<-trp> or B<--trim-pod> will remove trailing whitespace from lines of POD.
+ The default is not to do this.
+
=back
=head2 Comment Controls
=item B<-fpsc=n>, B<--fixed-position-side-comment=n>
This parameter tells perltidy to line up side comments in column number B<n>
- whenever possible. The default, n=0, is not do do this.
+ whenever possible. The default, n=0, will not do this.
+
+ =item B<-iscl>, B<--ignore-side-comment-lengths>
+
+ This parameter causes perltidy to ignore the length of side comments when
+ setting line breaks. The default, B<-niscl>, is to include the length of
+ side comments when breaking lines to stay within the length prescribed
+ by the B<-l=n> maximum line length parameter. For example, the following
+ long single line would remain intact with -l=80 and -iscl:
+
+ perltidy -l=80 -iscl
+ $vmsfile =~ s/;[\d\-]*$//; # Clip off version number; we can use a newer version as well
+
+ whereas without the -iscl flag the line will be broken:
+
+ perltidy -l=80
+ $vmsfile =~ s/;[\d\-]*$//
+ ; # Clip off version number; we can use a newer version as well
+
=item B<-hsc>, B<--hanging-side-comments>
perltidy -csc -ncscb
} ## end foreach my $foo (sort { $b cmp $a ...
- However this causes a problem with editors editors which cannot recognize
+ However this causes a problem with editors which cannot recognize
comments or are not configured to do so because they cannot "bounce" around in
the text correctly. The B<-cscb> flag has been added to
help them by appending appropriate balancing structure:
=item B<-osbc>, B<--outdent-static-block-comments>
- The command B<-osbc> will will cause static block comments to be outdented by 2
+ The command B<-osbc> will cause static block comments to be outdented by 2
spaces (or whatever B<-ci=n> has been set to), if possible.
=back
=item B<-ssc>, B<--static-side-comments>
When B<-ssc> is used, a side comment with a static leading pattern, which is
- C<##> by default, will be be spaced only a single space from previous
+ C<##> by default, will be spaced only a single space from previous
character, and it will not be vertically aligned with other side comments.
The default is B<-nssc>.
description => $ref->{description}
};
- The flag B<-otr> is actually a synonym for three other flags
+ The flag B<-otr> is actually an abbreviation for three other flags
which can be used to control parens, hash braces, and square brackets
separately if desired:
=item *
- Different controls may be applied to to different token types,
+ Different controls may be applied to different token types,
and it is also possible to control block braces; see below.
=item *
C<perltidy -bli -bbvt=1 -bbvtl='if elsif else'>.
There is no vertical tightness control for closing block braces; with
- the exception of one-line blocks, they will normally remain on a
- separate line.
+ one exception they will be placed on separate lines.
+ The exception is that a cascade of closing block braces may
+ be stacked on a single line. See B<-scbb>.
=item B<-sot>, B<--stack-opening-tokens> and related flags
-sop or --stack-opening-paren
-sohb or --stack-opening-hash-brace
-sosb or --stack-opening-square-bracket
+ -sobb or --stack-opening-block-brace
- The flag B<-sot> is a synonym for B<-sop -sohb -sosb>.
+ The flag B<-sot> is an abbreviation for B<-sop -sohb -sosb>.
+
+ The flag B<-sobb> is a abbreviation for B<-bbvt=2 -bbvtl='*'>. This
+ will case a cascade of opening block braces to appear on a single line,
+ although this an uncommon occurrence except in test scripts.
=item B<-sct>, B<--stack-closing-tokens> and related flags
-scp or --stack-closing-paren
-schb or --stack-closing-hash-brace
-scsb or --stack-closing-square-bracket
+ -scbb or --stack-closing-block-brace
+
+ The flag B<-sct> is an abbreviation for stacking the non-block closing
+ tokens, B<-scp -schb -scsb>.
- The flag B<-sct> is a synonym for B<-scp -schb -scsb>.
+ Stacking of closing block braces, B<-scbb>, causes a cascade of isolated
+ closing block braces to be combined into a single line as in the following
+ example:
+
+ # -scbb:
+ for $w1 (@w1) {
+ for $w2 (@w2) {
+ for $w3 (@w3) {
+ for $w4 (@w4) {
+ push( @lines, "$w1 $w2 $w3 $w4\n" );
+ } } } }
+
+ To simplify input even further for the case in which both opening and closing
+ non-block containers are stacked, the flag B<-sac> or B<--stack-all-containers>
+ is an abbreviation for B<-sot -sot>.
=item B<-dnl>, B<--delete-old-newlines>
=item B<-cab=n>, B<--comma-arrow-breakpoints=n>
- A comma which follows a comma arrow, '=>', requires special
+ A comma which follows a comma arrow, '=>', is given special
consideration. In a long list, it is common to break at all such
commas. This parameter can be used to control how perltidy breaks at
these commas. (However, it will have no effect if old comma breaks are
being forced because B<-boc> is used). The possible values of B<n> are:
n=0 break at all commas after =>
- n=1 stable: break at all commas after => unless this would break
- an existing one-line container (default)
- n=2 break at all commas after =>, but try to form the maximum
+ n=1 stable: break at all commas after => if container is open,
+ EXCEPT FOR one-line containers
+ n=2 break at all commas after =>, BUT try to form the maximum
maximum one-line container lengths
n=3 do not treat commas after => specially at all
+ n=4 break everything: like n=0 but ALSO break a short container with
+ a => not followed by a comma when -vt=0 is used
+ n=5 stable: like n=1 but ALSO break at open one-line containers when
+ -vt=0 is used (default)
For example, given the following single line, perltidy by default will
not add any line breaks because it would break the existing one-line
If perltidy is subsequently run with this container broken, then by
default it will break after each '=>' because the container is now
- broken. To reform a one-line container, the parameter B<-cab=2> would
- be needed.
+ broken. To reform a one-line container, the parameter B<-cab=2> could
+ be used.
The flag B<-cab=3> can be used to prevent these commas from being
treated specially. In this case, an item such as "01" => 31 is
The statements are still subject to the specified value
of B<maximum-line-length> and will be broken if this
- maximum is exceeed.
+ maximum is exceeded.
=back
definition which does not follow a comment and which is more than one-line
long. The default is <-blbs=1>. B<BEGIN> and B<END> blocks are included.
- The requested number of blanks statement will be inserted regardless of of the
+ The requested number of blanks statement will be inserted regardless of the
value of B<--maximum-consecutive-blank-lines=n> (B<-mbl=n>) with the exception
that if B<-mbl=0> then no blanks will be output.
=item B<-bbs>, B<--blanks-before-subs>
- For compatibility with previous versions, B<-bbs> or B<--blanks-before-subs>
+ For compatibility with previous versions, B<-bbs> or B<--blanks-before-subs>
is equivalent to F<-blbp=1> and F<-blbs=1>.
Likewise, B<-nbbs> or B<--noblanks-before-subs>
-wbb="% + - * / x != == >= <= =~ !~ < > | & =
**= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x="
- Note that the -st and -se flags make perltidy act as a filter on one file only.
- These can be overridden with -nst and -nse if necessary.
+ Please note that this parameter set includes -st and -se flags, which make
+ perltidy act as a filter on one file only. These can be overridden by placing
+ B<-nst> and/or B<-nse> after the -pbp parameter.
+
+ Also note that the value of continuation indentation, -ci=4, is equal to the
+ value of the full indentation, -i=4. In some complex statements perltidy will
+ produce nicer results with -ci=2. This can be implemented by including -ci=2
+ after the -pbp parameter. For example,
+
+ # perltidy -pbp
+ $self->{_text} = (
+ !$section ? ''
+ : $type eq 'item' ? "the $section entry"
+ : "the section on $section"
+ )
+ . (
+ $page
+ ? ( $section ? ' in ' : '' ) . "the $page$page_ext manpage"
+ : ' elsewhere in this document'
+ );
+
+ # perltidy -pbp -ci=2
+ $self->{_text} = (
+ !$section ? ''
+ : $type eq 'item' ? "the $section entry"
+ : "the section on $section"
+ )
+ . (
+ $page
+ ? ( $section ? ' in ' : '' ) . "the $page$page_ext manpage"
+ : ' elsewhere in this document'
+ );
=back
in the INSTALL file distributed with perltidy.
Under Windows, perltidy will also search for a configuration file named perltidy.ini since Windows does not allow files with a leading period (.).
- Use C<perltidy -dpro> to see the possbile locations for your system.
+ Use C<perltidy -dpro> to see the possible locations for your system.
An example might be F<C:\Documents and Settings\All Users\perltidy.ini>.
Another option is the use of the PERLTIDY environment variable.
full path of the configuration file in the value of the environment variable.
Ex. PERLTIDY=C:\Documents and Settings\perltidy.ini
- The configuation file is free format, and simply a list of parameters, just as
+ The configuration file is free format, and simply a list of parameters, just as
they would be entered on a command line. Any number of lines may be used, with
any number of parameters per line, although it may be easiest to read with one
parameter per line. Comment text begins with a #, and there must
to standard output and quit. See the section on controlling whitespace
around tokens.
+ B<--no-memoize> or B<-nmem> will turn of memoizing.
+ Memoization can reduce run time when running perltidy repeatedly in a
+ single process. It is on by default but can be deactivated for
+ testing with B<-nmem>.
+
B<-DEBUG> will write a file with extension F<.DEBUG> for each input file
showing the tokenization of all lines of code.
specifying an associated list of block types. The type of a block is the name
of the keyword which introduces that block, such as B<if>, B<else>, or B<sub>.
An exception is a labeled block, which has no keyword, and should be specified
- with just a colon.
+ with just a colon. To specify all blocks use B<'*'>.
For example, the following parameter specifies C<sub>, labels, C<BEGIN>, and
C<END> blocks:
(the meaning of the -cscl parameter is described above.) Note that
quotes are required around the list of block types because of the
- spaces.
+ spaces. For another example, the following list specifies all block types
+ for vertical tightness:
+
+ -bbvtl='*'
=head2 Specifying File Extensions
D anl asc aws b bbb bbc bbs bl bli boc bok bol bot ce
csc dac dbc dcsc ddf dln dnl dop dp dpro dsc dsm dsn dtt dwls
dwrs dws f fll frm fs hsc html ibc icb icp iob isbc lal log
- lp lsl ohbr okw ola oll opr opt osbr otr ple ple pod pvl q
+ lp lsl ohbr okw ola oll opr opt osbr otr ple pod pvl q
sbc sbl schb scp scsb sct se sfp sfs skp sob sohb sop sosb sot
ssc st sts syn t tac tbc toc tp tqw tsc w x bar kis
=head1 VERSION
- This man page documents perltidy version 20120701.
+ This man page documents perltidy version 20130922.
=head1 CREDITS
=head1 COPYRIGHT
- Copyright (c) 2000-2010 by Steve Hancock
+ Copyright (c) 2000-2012 by Steve Hancock
=head1 LICENSE