+++ /dev/null
-#### Contents of the preconfiguration file (for wheezy)
-### Hints:
-### To get a list of current d-i setting keys, run
-### sudo debconf-get-selections --installer
-### on an up-to-date system
-###
-### Localization
-# Locale sets language and country.
-d-i debian-installer/locale string en_US.UTF-8
-d-i debian-installer/language string en
-d-i debian-installer/country string US
-
-# Keyboard selection.
-#d-i console-tools/archs select at
-#d-i console-setup-pc-ekmap/keymap select us
-# Need to set "American English" for "Keymap to use"
-d-i countrychooser/country-name select United States
-# Example for a different keyboard architecture
-#d-i console-keymaps-usb/keymap select mac-usb-us
-#d-i console-keymaps-at/keymap select us
-d-i keyboard-configuration/xkb-keymap select us
-
-### Network configuration
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-# To pick a particular interface instead:
-#d-i netcfg/choose_interface select eth1
-
-# If you have a slow dhcp server and the installer times out waiting for
-# it, this might be useful.
-#d-i netcfg/dhcp_timeout string 60
-
-# If you prefer to configure the network manually, uncomment this line and
-# the static network configuration below.
-#d-i netcfg/disable_dhcp boolean true
-
-# If you want the preconfiguration file to work on systems both with and
-# without a dhcp server, uncomment these lines and the static network
-# configuration below.
-#d-i netcfg/dhcp_failed note
-#d-i netcfg/dhcp_options select Configure network manually
-
-# Static network configuration.
-#d-i netcfg/get_nameservers string 192.168.1.1
-#d-i netcfg/get_ipaddress string 192.168.1.42
-#d-i netcfg/get_netmask string 255.255.255.0
-#d-i netcfg/get_gateway string 192.168.1.1
-#d-i netcfg/confirm_static boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-d-i netcfg/get_hostname string neurodebian
-d-i netcfg/invalid_hostname string neurodebian
-# d-i netcfg/get_domain string unassigned-domain
-
-# Disable that annoying WEP key dialog.
-# d-i netcfg/wireless_wep string
-# The wacky dhcp hostname that some ISPs use as a password of sorts.
-# d-i netcfg/dhcp_hostname string neurodebian
-
-# If non-free firmware is needed for the network or other hardware, you can
-# configure the installer to always try to load it, without prompting. Or
-# change to false to disable asking.
-#d-i hw-detect/load_firmware boolean true
-
-### Network console
-# Use the following settings if you wish to make use of the network-console
-# component for remote installation over SSH. This only makes sense if you
-# intend to perform the remainder of the installation manually.
-#d-i anna/choose_modules string network-console
-#d-i network-console/password password r00tme
-#d-i network-console/password-again password r00tme
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-d-i mirror/country string manual
-d-i mirror/http/hostname string ftp.debian.de
-d-i mirror/http/directory string /debian
-#d-i mirror/http/proxy string
-
-# Suite to install.
-d-i mirror/suite string wheezy
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string testing
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string Europe/Berlin
-
-# Controls whether to use NTP to set the clock during the install
-d-i clock-setup/ntp boolean true
-# NTP server to use. The default is almost always fine here.
-#d-i clock-setup/ntp-server string ntp.example.com
-
-### Partitioning
-# If the system has free space you can choose to only partition that space.
-#d-i partman-auto/init_automatically_partition select biggest_free
-
-# Alternatively, you can specify a disk to partition. The device name must
-# be given in traditional non-devfs format.
-# Note: A disk must be specified, unless the system has only one disk.
-# For example, to use the first SCSI/SATA hard disk:
-d-i partman-auto/disk string /dev/sda
-# In addition, you'll need to specify the method to use.
-# The presently available methods are: "regular", "lvm" and "crypto"
-d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-#d-i partman-lvm/device_remove_lvm boolean true
-# The same applies to pre-existing software RAID array:
-#d-i partman-md/device_remove_md boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-#d-i partman-lvm/confirm boolean true
-
-# You can choose one of the three predefined partitioning recipes:
-# - atomic: all files in one partition
-# - home: separate /home partition
-# - multi: separate /home, /usr, /var, and /tmp partitions
-d-i partman-auto/choose_recipe select atomic
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-d-i partman-auto/expert_recipe string \
- boot-root :: \
- 10000 40000 1000000000 ext4 \
- $primary{ } $bootable{ } \
- method{ format } format{ } \
- use_filesystem{ } filesystem{ ext4 } \
- label{NEURODEBIAN} \
- mountpoint{ / } \
- . \
- 2048 2048 2048 linux-swap \
- method{ swap } format{ } \
- .
-
-# This makes partman automatically partition without confirmation, provided
-# that you told it what to do using one of the methods above.
-d-i partman/confirm_write_new_label boolean true
-d-i partman/choose_partition select finish
-d-i partman/confirm boolean true
-d-i partman/confirm_nooverwrite boolean true
-
-### Base system installation
-# Select the initramfs generator used to generate the initrd for 2.6 kernels.
-#d-i base-installer/kernel/linux/initramfs-generators string yaird
-
-# The kernel image (meta) package to be installed; "none" can be used if no
-# kernel is to be installed.
-#d-i base-installer/kernel/image string linux-image-2.6-486
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo).
-#d-i passwd/root-login boolean false
-# Alternatively, to skip creation of a normal user account.
-#d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-d-i passwd/root-password password neurodebian
-d-i passwd/root-password-again password neurodebian
-# or encrypted using an MD5 hash.
-#d-i passwd/root-password-crypted password [MD5 hash]
-
-# To create a normal user account.
-d-i passwd/user-fullname string NeuroDebian User
-d-i passwd/username string brain
-# Normal user's password, either in clear text
-d-i passwd/user-password password neurodebian
-d-i passwd/user-password-again password neurodebian
-# or encrypted using an MD5 hash.
-#d-i passwd/user-password-crypted password [MD5 hash]
-# Create the first user with the specified UID instead of the default.
-d-i passwd/user-uid string 1000
-# XXX no gid?
-
-# The user account will be added to some standard initial groups. To
-# override that, use this.
-d-i passwd/user-default-groups string audio cdrom floppy video plugdev dip sudo
-
-### Apt setup
-# You can choose to install non-free and contrib software.
-d-i apt-setup/non-free boolean true
-d-i apt-setup/contrib boolean true
-# Uncomment this if you don't want to use a network mirror.
-#d-i apt-setup/use_mirror boolean false
-# Select which update services to use; define the mirrors to be used.
-# Values shown below are the normal defaults.
-#d-i apt-setup/services-select multiselect security, volatile
-d-i apt-setup/security_host string security.debian.org
-#d-i apt-setup/volatile_host string volatile.debian.org
-# XXX?
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# http://local.server/debian stable main
-#d-i apt-setup/local0/comment string local server
-# XXX our nd?
-#d-i apt-getup/local0/repository string \
-# http://neuro.debian.net/debian data main contrib non-free
-#d-i apt-setup/local0/comment string NeuroDebian data
-#d-i apt-setup/local0/source boolean true
-#d-i apt-getup/local1/repository string \
-# http://neuro.debian.net/debian squeeze main contrib non-free
-#d-i apt-setup/local1/comment string NeuroDebian software
-#d-i apt-setup/local1/source boolean true
-
-
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string \
-# http://neuro.debian.net/_static/neuro.debian.net.asc
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated string true
-
-### Package selection
-#tasksel tasksel/first multiselect standard, web-server
-tasksel tasksel/first multiselect
-# If the desktop task is selected, install the kde and xfce desktops
-# instead of the default gnome desktop.
-#tasksel tasksel/desktop multiselect kde, xfce
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-# Whether to upgrade packages after debootstrap.
-# Allowed values: none, safe-upgrade, full-upgrade
-#d-i pkgsel/upgrade select none
-
-# Some versions of the installer can report back on what software you have
-# installed, and what software you use. The default is not to report back,
-# but sending reports helps the project determine what software is most
-# popular and include it on CDs.
-# ND: popcon installed upon initial boot
-popularity-contest popularity-contest/participate boolean false
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-# To also skip installing lilo, and install no bootloader, uncomment this
-# too:
-#d-i lilo-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean false
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev string (hd0,0)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
-
-# Optional password for grub, either in clear text
-#d-i grub-installer/password password r00tme
-#d-i grub-installer/password-again password r00tme
-# or encrypted using an MD5 hash, see grub-md5-crypt(8).
-#d-i grub-installer/password-crypted password [MD5 hash]
-
-### Finishing up the installation
-# During installations from serial console, the regular virtual consoles
-# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
-# line to prevent this.
-#d-i finish-install/keep-consoles boolean true
-
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-# This is how to make the installer shutdown when finished, but not
-# reboot into the installed system.
-#d-i debian-installer/exit/halt boolean true
-# This will power off the machine instead of just halting it.
-d-i debian-installer/exit/poweroff boolean true
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-#d-i preseed/late_command string wget -O/target/tmp/initial_setup http://git.debian.org/?p=pkg-exppsy/neurodebian.git;a=blob_plain;f=vm/d-i/tools/initial_setup;hb=HEAD; \
-d-i preseed/late_command string wget -O/target/tmp/initial_setup http://10.0.2.2:10100/initial_setup ; \
- in-target /bin/bash /tmp/initial_setup
-
-# XXX here get/call nd_setupguestos ?
-
--- /dev/null
+#### Contents of the preconfiguration file (for wheezy)
+### Hints:
+### To get a list of current d-i setting keys, run
+### sudo debconf-get-selections --installer
+### on an up-to-date system
+###
+### Localization
+# Locale sets language and country.
+d-i debian-installer/locale string en_US.UTF-8
+d-i debian-installer/language string en
+d-i debian-installer/country string US
+
+# Keyboard selection.
+#d-i console-tools/archs select at
+#d-i console-setup-pc-ekmap/keymap select us
+# Need to set "American English" for "Keymap to use"
+d-i countrychooser/country-name select United States
+# Example for a different keyboard architecture
+#d-i console-keymaps-usb/keymap select mac-usb-us
+#d-i console-keymaps-at/keymap select us
+d-i keyboard-configuration/xkb-keymap select us
+
+### Network configuration
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To pick a particular interface instead:
+#d-i netcfg/choose_interface select eth1
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+#d-i netcfg/dhcp_timeout string 60
+
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_dhcp boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string neurodebian
+d-i netcfg/invalid_hostname string neurodebian
+# d-i netcfg/get_domain string unassigned-domain
+
+# Disable that annoying WEP key dialog.
+# d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+# d-i netcfg/dhcp_hostname string neurodebian
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+#d-i hw-detect/load_firmware boolean true
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# If you select ftp, the mirror/country string does not need to be set.
+#d-i mirror/protocol string ftp
+d-i mirror/country string manual
+d-i mirror/http/hostname string ftp.debian.de
+d-i mirror/http/directory string /debian
+#d-i mirror/http/proxy string
+
+# Suite to install.
+d-i mirror/suite string wheezy
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string Europe/Berlin
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+#d-i clock-setup/ntp-server string ntp.example.com
+
+### Partitioning
+# If the system has free space you can choose to only partition that space.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you can specify a disk to partition. The device name must
+# be given in traditional non-devfs format.
+# Note: A disk must be specified, unless the system has only one disk.
+# For example, to use the first SCSI/SATA hard disk:
+d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are: "regular", "lvm" and "crypto"
+d-i partman-auto/method string regular
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+#d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+#d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+#d-i partman-lvm/confirm boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home: separate /home partition
+# - multi: separate /home, /usr, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# The recipe format is documented in the file devel/partman-auto-recipe.txt.
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+d-i partman-auto/expert_recipe string \
+ boot-root :: \
+ 10000 40000 1000000000 ext4 \
+ $primary{ } $bootable{ } \
+ method{ format } format{ } \
+ use_filesystem{ } filesystem{ ext4 } \
+ label{NEURODEBIAN} \
+ mountpoint{ / } \
+ . \
+ 2048 2048 2048 linux-swap \
+ method{ swap } format{ } \
+ .
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+### Base system installation
+# Select the initramfs generator used to generate the initrd for 2.6 kernels.
+#d-i base-installer/kernel/linux/initramfs-generators string yaird
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-2.6-486
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+#d-i passwd/root-login boolean false
+# Alternatively, to skip creation of a normal user account.
+#d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+d-i passwd/root-password password neurodebian
+d-i passwd/root-password-again password neurodebian
+# or encrypted using an MD5 hash.
+#d-i passwd/root-password-crypted password [MD5 hash]
+
+# To create a normal user account.
+d-i passwd/user-fullname string NeuroDebian User
+d-i passwd/username string brain
+# Normal user's password, either in clear text
+d-i passwd/user-password password neurodebian
+d-i passwd/user-password-again password neurodebian
+# or encrypted using an MD5 hash.
+#d-i passwd/user-password-crypted password [MD5 hash]
+# Create the first user with the specified UID instead of the default.
+d-i passwd/user-uid string 1000
+# XXX no gid?
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+d-i passwd/user-default-groups string audio cdrom floppy video plugdev dip sudo
+
+### Apt setup
+# You can choose to install non-free and contrib software.
+d-i apt-setup/non-free boolean true
+d-i apt-setup/contrib boolean true
+# Uncomment this if you don't want to use a network mirror.
+#d-i apt-setup/use_mirror boolean false
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security, volatile
+d-i apt-setup/security_host string security.debian.org
+#d-i apt-setup/volatile_host string volatile.debian.org
+# XXX?
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+# http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# XXX our nd?
+#d-i apt-getup/local0/repository string \
+# http://neuro.debian.net/debian data main contrib non-free
+#d-i apt-setup/local0/comment string NeuroDebian data
+#d-i apt-setup/local0/source boolean true
+#d-i apt-getup/local1/repository string \
+# http://neuro.debian.net/debian squeeze main contrib non-free
+#d-i apt-setup/local1/comment string NeuroDebian software
+#d-i apt-setup/local1/source boolean true
+
+
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out
+#d-i apt-setup/local0/key string \
+# http://neuro.debian.net/_static/neuro.debian.net.asc
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated string true
+
+### Package selection
+#tasksel tasksel/first multiselect standard, web-server
+tasksel tasksel/first multiselect
+# If the desktop task is selected, install the kde and xfce desktops
+# instead of the default gnome desktop.
+#tasksel tasksel/desktop multiselect kde, xfce
+
+# Individual additional packages to install
+#d-i pkgsel/include string openssh-server build-essential
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+#d-i pkgsel/upgrade select none
+
+# Some versions of the installer can report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and include it on CDs.
+# ND: popcon installed upon initial boot
+popularity-contest popularity-contest/participate boolean false
+
+### Boot loader installation
+# Grub is the default boot loader (for x86). If you want lilo installed
+# instead, uncomment this:
+#d-i grub-installer/skip boolean true
+# To also skip installing lilo, and install no bootloader, uncomment this
+# too:
+#d-i lilo-installer/skip boolean true
+
+# This is fairly safe to set, it makes grub install automatically to the MBR
+# if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# This one makes grub-installer install to the MBR if it also finds some other
+# OS, which is less safe as it might not be able to boot that other OS.
+d-i grub-installer/with_other_os boolean false
+
+# Alternatively, if you want to install to a location other than the mbr,
+# uncomment and edit these lines:
+#d-i grub-installer/only_debian boolean false
+#d-i grub-installer/with_other_os boolean false
+#d-i grub-installer/bootdev string (hd0,0)
+# To install grub to multiple disks:
+#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
+
+# Optional password for grub, either in clear text
+#d-i grub-installer/password password r00tme
+#d-i grub-installer/password-again password r00tme
+# or encrypted using an MD5 hash, see grub-md5-crypt(8).
+#d-i grub-installer/password-crypted password [MD5 hash]
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+#d-i cdrom-detect/eject boolean false
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+# debconf-get-selections --installer > file
+# debconf-get-selections >> file
+
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
+#d-i preseed/late_command string wget -O/target/tmp/initial_setup http://git.debian.org/?p=pkg-exppsy/neurodebian.git;a=blob_plain;f=vm/d-i/tools/initial_setup;hb=HEAD; \
+d-i preseed/late_command string wget -O/target/tmp/initial_setup http://10.0.2.2:10100/initial_setup ; \
+ in-target /bin/bash /tmp/initial_setup
+
+# XXX here get/call nd_setupguestos ?
+
projects / neurodebian.git / commitdiff