}
//make sure the user has already run the read.otu command
- if ((globaldata->getListFile() == "") && (globaldata->getRabundFile() == "") && (globaldata->getSabundFile() == "")) { cout << "You must read a list, sabund or rabund before you can use the collect.single command." << endl; abort = true; }
+ if ((globaldata->getListFile() == "") && (globaldata->getRabundFile() == "") && (globaldata->getSabundFile() == "")) { mothurOut("You must read a list, sabund or rabund before you can use the collect.single command."); mothurOutEndLine(); abort = true; }
//check for optional parameter and set defaults
// ...at some point should added some additional type checking...
}
//make sure user did not use both the line and label parameters
- if ((line != "") && (label != "")) { cout << "You cannot use both the line and label parameters at the same time. " << endl; abort = true; }
+ if ((line != "") && (label != "")) { mothurOut("You cannot use both the line and label parameters at the same time. "); mothurOutEndLine(); abort = true; }
//if the user has not specified any line or labels use the ones from read.otu
else if((line == "") && (label == "")) {
allLines = globaldata->allLines;
}
catch(exception& e) {
- cout << "Standard Error: " << e.what() << " has occurred in the CollectCommand class Function CollectCommand. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
+ errorOut(e, "CollectCommand", "CollectCommand");
exit(1);
- }
- catch(...) {
- cout << "An unknown error has occurred in the CollectCommand class function CollectCommand. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
- exit(1);
- }
-
+ }
}
//**********************************************************************************************************************
void CollectCommand::help(){
try {
- cout << "The collect.single command can only be executed after a successful read.otu command. WITH ONE EXECEPTION. " << "\n";
- cout << "The collect.single command can be executed after a successful cluster command. It will use the .list file from the output of the cluster." << "\n";
- cout << "The collect.single command parameters are label, line, freq, calc and abund. No parameters are required, but you may not use " << "\n";
- cout << "both the line and label parameters at the same time. The collect.single command should be in the following format: " << "\n";
- cout << "collect.single(label=yourLabel, line=yourLines, iters=yourIters, freq=yourFreq, calc=yourEstimators)." << "\n";
- cout << "Example collect(label=unique-.01-.03, line=0-5-10, iters=10000, freq=10, calc=sobs-chao-ace-jack)." << "\n";
- cout << "The default values for freq is 100, and calc are sobs-chao-ace-jack-shannon-npshannon-simpson." << "\n";
+ mothurOut("The collect.single command can only be executed after a successful read.otu command. WITH ONE EXECEPTION. \n");
+ mothurOut("The collect.single command can be executed after a successful cluster command. It will use the .list file from the output of the cluster.\n");
+ mothurOut("The collect.single command parameters are label, line, freq, calc and abund. No parameters are required, but you may not use \n");
+ mothurOut("both the line and label parameters at the same time. The collect.single command should be in the following format: \n");
+ mothurOut("collect.single(label=yourLabel, line=yourLines, iters=yourIters, freq=yourFreq, calc=yourEstimators).\n");
+ mothurOut("Example collect(label=unique-.01-.03, line=0-5-10, iters=10000, freq=10, calc=sobs-chao-ace-jack).\n");
+ mothurOut("The default values for freq is 100, and calc are sobs-chao-ace-jack-shannon-npshannon-simpson.\n");
validCalculator->printCalc("single", cout);
- cout << "The label and line parameters are used to analyze specific lines in your input." << "\n";
- cout << "Note: No spaces between parameter labels (i.e. freq), '=' and parameters (i.e.yourFreq)." << "\n" << "\n";
+ mothurOut("The label and line parameters are used to analyze specific lines in your input.\n");
+ mothurOut("Note: No spaces between parameter labels (i.e. freq), '=' and parameters (i.e.yourFreq).\n\n");
}
catch(exception& e) {
- cout << "Standard Error: " << e.what() << " has occurred in the CollectCommand class Function help. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
+ errorOut(e, "CollectCommand", "help");
exit(1);
}
- catch(...) {
- cout << "An unknown error has occurred in the CollectCommand class function help. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
- exit(1);
- }
}
//**********************************************************************************************************************
cCurve->getCurve(freq);
delete cCurve;
- cout << order->getLabel() << '\t' << count << endl;
+ mothurOut(order->getLabel() + "\t" + toString(count)); mothurOutEndLine();
processedLabels.insert(order->getLabel());
userLabels.erase(order->getLabel());
userLines.erase(count);
cCurve->getCurve(freq);
delete cCurve;
- cout << order->getLabel() << '\t' << count << endl;
+ mothurOut(order->getLabel() + "\t" + toString(count)); mothurOutEndLine();
processedLabels.insert(order->getLabel());
userLabels.erase(order->getLabel());
}
set<string>::iterator it;
bool needToRun = false;
for (it = userLabels.begin(); it != userLabels.end(); it++) {
- cout << "Your file does not include the label "<< *it;
+ mothurOut("Your file does not include the label " + *it);
if (processedLabels.count(lastLabel) != 1) {
- cout << ". I will use " << lastLabel << "." << endl;
+ mothurOut(". I will use " + lastLabel + "."); mothurOutEndLine();
needToRun = true;
}else {
- cout << ". Please refer to " << lastLabel << "." << endl;
+ mothurOut(". Please refer to " + lastLabel + "."); mothurOutEndLine();
}
}
delete order;
order = (input->getOrderVector(lastLabel));
- cout << order->getLabel() << '\t' << count << endl;
+ mothurOut(order->getLabel() + "\t" + toString(count)); mothurOutEndLine();
cCurve = new Collect(order, cDisplays);
cCurve->getCurve(freq);
return 0;
}
catch(exception& e) {
- cout << "Standard Error: " << e.what() << " has occurred in the CollectCommand class Function execute. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
+ errorOut(e, "CollectCommand", "execute");
exit(1);
}
- catch(...) {
- cout << "An unknown error has occurred in the CollectCommand class function execute. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
- exit(1);
- }
}
//**********************************************************************************************************************
projects / mothur.git / blobdiff