*/
#include "chimeracheckcommand.h"
+#include "referencedb.h"
-//***************************************************************************************************************
+//**********************************************************************************************************************
+vector<string> ChimeraCheckCommand::setParameters(){
+ try {
+ CommandParameter ptemplate("reference", "InputTypes", "", "", "none", "none", "none","",false,true,true); parameters.push_back(ptemplate);
+ CommandParameter pfasta("fasta", "InputTypes", "", "", "none", "none", "none","chimera",false,true,true); parameters.push_back(pfasta);
+ CommandParameter pname("name", "InputTypes", "", "", "none", "none", "none","",false,false,true); parameters.push_back(pname);
+ CommandParameter psvg("svg", "Boolean", "", "F", "", "", "","",false,false); parameters.push_back(psvg);
+ CommandParameter pincrement("increment", "Number", "", "10", "", "", "","",false,false); parameters.push_back(pincrement);
+ CommandParameter pksize("ksize", "Number", "", "7", "", "", "","",false,false); parameters.push_back(pksize);
+ CommandParameter pprocessors("processors", "Number", "", "1", "", "", "","",false,false,true); parameters.push_back(pprocessors);
+ CommandParameter pinputdir("inputdir", "String", "", "", "", "", "","",false,false); parameters.push_back(pinputdir);
+ CommandParameter poutputdir("outputdir", "String", "", "", "", "", "","",false,false); parameters.push_back(poutputdir);
+ CommandParameter psave("save", "Boolean", "", "F", "", "", "","",false,false); parameters.push_back(psave);
+ vector<string> myArray;
+ for (int i = 0; i < parameters.size(); i++) { myArray.push_back(parameters[i].name); }
+ return myArray;
+ }
+ catch(exception& e) {
+ m->errorOut(e, "ChimeraCheckCommand", "setParameters");
+ exit(1);
+ }
+}
+//**********************************************************************************************************************
+string ChimeraCheckCommand::getHelpString(){
+ try {
+ string helpString = "";
+ helpString += "The chimera.check command reads a fastafile and referencefile and outputs potentially chimeric sequences.\n";
+ helpString += "This command was created using the algorythms described in CHIMERA_CHECK version 2.7 written by Niels Larsen. \n";
+ helpString += "The chimera.check command parameters are fasta, reference, processors, ksize, increment, svg and name.\n";
+ helpString += "The fasta parameter allows you to enter the fasta file containing your potentially chimeric sequences, and is required unless you have a valid current fasta file. \n";
+ helpString += "You may enter multiple fasta files by separating their names with dashes. ie. fasta=abrecovery.fasta-amzon.fasta \n";
+ helpString += "The reference parameter allows you to enter a reference file containing known non-chimeric sequences, and is required. \n";
+ helpString += "The processors parameter allows you to specify how many processors you would like to use. The default is 1. \n";
+#ifdef USE_MPI
+ helpString += "When using MPI, the processors parameter is set to the number of MPI processes running. \n";
+#endif
+ helpString += "The increment parameter allows you to specify how far you move each window while finding chimeric sequences, default is 10.\n";
+ helpString += "The ksize parameter allows you to input kmersize, default is 7. \n";
+ helpString += "The svg parameter allows you to specify whether or not you would like a svg file outputted for each query sequence, default is False.\n";
+ helpString += "The name parameter allows you to enter a file containing names of sequences you would like .svg files for.\n";
+ helpString += "You may enter multiple name files by separating their names with dashes. ie. fasta=abrecovery.svg.names-amzon.svg.names \n";
+ helpString += "If the save parameter is set to true the reference sequences will be saved in memory, to clear them later you can use the clear.memory command. Default=f.";
+ helpString += "The chimera.check command should be in the following format: \n";
+ helpString += "chimera.check(fasta=yourFastaFile, reference=yourTemplateFile, processors=yourProcessors, ksize=yourKmerSize) \n";
+ helpString += "Example: chimera.check(fasta=AD.fasta, reference=core_set_aligned,imputed.fasta, processors=4, ksize=8) \n";
+ helpString += "Note: No spaces between parameter labels (i.e. fasta), '=' and parameters (i.e.yourFastaFile).\n";
+ return helpString;
+ }
+ catch(exception& e) {
+ m->errorOut(e, "ChimeraCheckCommand", "getHelpString");
+ exit(1);
+ }
+}
+//**********************************************************************************************************************
+string ChimeraCheckCommand::getOutputPattern(string type) {
+ try {
+ string pattern = "";
+
+ if (type == "chimera") { pattern = "[filename],chimeracheck.chimeras"; }
+ else { m->mothurOut("[ERROR]: No definition for type " + type + " output pattern.\n"); m->control_pressed = true; }
+
+ return pattern;
+ }
+ catch(exception& e) {
+ m->errorOut(e, "ChimeraCheckCommand", "getOutputPattern");
+ exit(1);
+ }
+}
+//**********************************************************************************************************************
+ChimeraCheckCommand::ChimeraCheckCommand(){
+ try {
+ abort = true; calledHelp = true;
+ setParameters();
+ vector<string> tempOutNames;
+ outputTypes["chimera"] = tempOutNames;
+ }
+ catch(exception& e) {
+ m->errorOut(e, "ChimeraCheckCommand", "ChimeraCheckCommand");
+ exit(1);
+ }
+}
+//***************************************************************************************************************
ChimeraCheckCommand::ChimeraCheckCommand(string option) {
try {
- abort = false;
+ abort = false; calledHelp = false;
+ ReferenceDB* rdb = ReferenceDB::getInstance();
//allow user to run help
- if(option == "help") { help(); abort = true; }
+ if(option == "help") { help(); abort = true; calledHelp = true; }
+ else if(option == "citation") { citation(); abort = true; calledHelp = true;}
else {
- //valid paramters for this command
- string Array[] = {"fasta","processors","increment","template","ksize","svg", "name","outputdir","inputdir" };
- vector<string> myArray (Array, Array+(sizeof(Array)/sizeof(string)));
+ vector<string> myArray = setParameters();
OptionParser parser(option);
map<string,string> parameters = parser.getParameters();
if (validParameter.isValidParameter(it->first, myArray, it->second) != true) { abort = true; }
}
+ vector<string> tempOutNames;
+ outputTypes["chimera"] = tempOutNames;
+
//if the user changes the input directory command factory will send this info to us in the output parameter
string inputDir = validParameter.validFile(parameters, "inputdir", false);
if (inputDir == "not found"){ inputDir = ""; }
else {
- it = parameters.find("template");
+ it = parameters.find("reference");
//user has given a template file
if(it != parameters.end()){
- string path = hasPath(it->second);
+ string path = m->hasPath(it->second);
//if the user has not given a path then, add inputdir. else leave path alone.
- if (path == "") { parameters["template"] = inputDir + it->second; }
+ if (path == "") { parameters["reference"] = inputDir + it->second; }
}
}
//check for required parameters
fastafile = validParameter.validFile(parameters, "fasta", false);
- if (fastafile == "not found") { fastafile = ""; m->mothurOut("fasta is a required parameter for the chimera.check command."); m->mothurOutEndLine(); abort = true; }
- else {
- splitAtDash(fastafile, fastaFileNames);
+ if (fastafile == "not found") {
+ //if there is a current fasta file, use it
+ string filename = m->getFastaFile();
+ if (filename != "") { fastaFileNames.push_back(filename); m->mothurOut("Using " + filename + " as input file for the fasta parameter."); m->mothurOutEndLine(); }
+ else { m->mothurOut("You have no current fastafile and the fasta parameter is required."); m->mothurOutEndLine(); abort = true; }
+ }else {
+ m->splitAtDash(fastafile, fastaFileNames);
//go through files and make sure they are good, if not, then disregard them
for (int i = 0; i < fastaFileNames.size(); i++) {
- if (inputDir != "") {
- string path = hasPath(fastaFileNames[i]);
- //if the user has not given a path then, add inputdir. else leave path alone.
- if (path == "") { fastaFileNames[i] = inputDir + fastaFileNames[i]; }
- }
-
- int ableToOpen;
- ifstream in;
- ableToOpen = openInputFile(fastaFileNames[i], in, "noerror");
-
- //if you can't open it, try default location
- if (ableToOpen == 1) {
- if (m->getDefaultPath() != "") { //default path is set
- string tryPath = m->getDefaultPath() + getSimpleName(fastaFileNames[i]);
- m->mothurOut("Unable to open " + fastaFileNames[i] + ". Trying default " + tryPath); m->mothurOutEndLine();
- ableToOpen = openInputFile(tryPath, in, "noerror");
- fastaFileNames[i] = tryPath;
+ bool ignore = false;
+ if (fastaFileNames[i] == "current") {
+ fastaFileNames[i] = m->getFastaFile();
+ if (fastaFileNames[i] != "") { m->mothurOut("Using " + fastaFileNames[i] + " as input file for the fasta parameter where you had given current."); m->mothurOutEndLine(); }
+ else {
+ m->mothurOut("You have no current fastafile, ignoring current."); m->mothurOutEndLine(); ignore=true;
+ //erase from file list
+ fastaFileNames.erase(fastaFileNames.begin()+i);
+ i--;
}
}
- in.close();
- if (ableToOpen == 1) {
- m->mothurOut("Unable to open " + fastaFileNames[i] +". It will be disregarded."); m->mothurOutEndLine();
- //erase from file list
- fastaFileNames.erase(fastaFileNames.begin()+i);
- i--;
+ if (!ignore) {
+
+
+ if (inputDir != "") {
+ string path = m->hasPath(fastaFileNames[i]);
+ //if the user has not given a path then, add inputdir. else leave path alone.
+ if (path == "") { fastaFileNames[i] = inputDir + fastaFileNames[i]; }
+ }
+
+ int ableToOpen;
+ ifstream in;
+
+ ableToOpen = m->openInputFile(fastaFileNames[i], in, "noerror");
+
+ //if you can't open it, try default location
+ if (ableToOpen == 1) {
+ if (m->getDefaultPath() != "") { //default path is set
+ string tryPath = m->getDefaultPath() + m->getSimpleName(fastaFileNames[i]);
+ m->mothurOut("Unable to open " + fastaFileNames[i] + ". Trying default " + tryPath); m->mothurOutEndLine();
+ ifstream in2;
+ ableToOpen = m->openInputFile(tryPath, in2, "noerror");
+ in2.close();
+ fastaFileNames[i] = tryPath;
+ }
+ }
+
+ //if you can't open it, try default location
+ if (ableToOpen == 1) {
+ if (m->getOutputDir() != "") { //default path is set
+ string tryPath = m->getOutputDir() + m->getSimpleName(fastaFileNames[i]);
+ m->mothurOut("Unable to open " + fastaFileNames[i] + ". Trying output directory " + tryPath); m->mothurOutEndLine();
+ ifstream in2;
+ ableToOpen = m->openInputFile(tryPath, in2, "noerror");
+ in2.close();
+ fastaFileNames[i] = tryPath;
+ }
+ }
+
+ in.close();
+
+ if (ableToOpen == 1) {
+ m->mothurOut("Unable to open " + fastaFileNames[i] +". It will be disregarded."); m->mothurOutEndLine();
+ //erase from file list
+ fastaFileNames.erase(fastaFileNames.begin()+i);
+ i--;
+ }else {
+ m->setFastaFile(fastaFileNames[i]);
+ }
}
}
//if the user changes the output directory command factory will send this info to us in the output parameter
outputDir = validParameter.validFile(parameters, "outputdir", false); if (outputDir == "not found"){ outputDir = ""; }
-
- templatefile = validParameter.validFile(parameters, "template", true);
- if (templatefile == "not open") { abort = true; }
- else if (templatefile == "not found") { templatefile = ""; m->mothurOut("template is a required parameter for the chimera.check command."); m->mothurOutEndLine(); abort = true; }
namefile = validParameter.validFile(parameters, "name", false);
if (namefile == "not found") { namefile = ""; }
else {
- splitAtDash(namefile, nameFileNames);
+ m->splitAtDash(namefile, nameFileNames);
//go through files and make sure they are good, if not, then disregard them
for (int i = 0; i < nameFileNames.size(); i++) {
- if (inputDir != "") {
- string path = hasPath(nameFileNames[i]);
- //if the user has not given a path then, add inputdir. else leave path alone.
- if (path == "") { nameFileNames[i] = inputDir + nameFileNames[i]; }
- }
-
- int ableToOpen;
- ifstream in;
- ableToOpen = openInputFile(nameFileNames[i], in, "noerror");
-
- //if you can't open it, try default location
- if (ableToOpen == 1) {
- if (m->getDefaultPath() != "") { //default path is set
- string tryPath = m->getDefaultPath() + getSimpleName(nameFileNames[i]);
- m->mothurOut("Unable to open " + nameFileNames[i] + ". Trying default " + tryPath); m->mothurOutEndLine();
- ableToOpen = openInputFile(tryPath, in, "noerror");
- nameFileNames[i] = tryPath;
+ bool ignore = false;
+ if (nameFileNames[i] == "current") {
+ nameFileNames[i] = m->getNameFile();
+ if (nameFileNames[i] != "") { m->mothurOut("Using " + nameFileNames[i] + " as input file for the name parameter where you had given current."); m->mothurOutEndLine(); }
+ else {
+ m->mothurOut("You have no current namefile, ignoring current."); m->mothurOutEndLine(); ignore=true;
+ //erase from file list
+ nameFileNames.erase(nameFileNames.begin()+i);
+ i--;
}
}
- in.close();
- if (ableToOpen == 1) {
- m->mothurOut("Unable to open " + nameFileNames[i] + ". It will be disregarded."); m->mothurOutEndLine();
- //erase from file list
- nameFileNames.erase(nameFileNames.begin()+i);
- i--;
- }
+ if (!ignore) {
+ if (inputDir != "") {
+ string path = m->hasPath(nameFileNames[i]);
+ //if the user has not given a path then, add inputdir. else leave path alone.
+ if (path == "") { nameFileNames[i] = inputDir + nameFileNames[i]; }
+ }
+
+ int ableToOpen;
+ ifstream in;
+
+ ableToOpen = m->openInputFile(nameFileNames[i], in, "noerror");
+
+ //if you can't open it, try default location
+ if (ableToOpen == 1) {
+ if (m->getDefaultPath() != "") { //default path is set
+ string tryPath = m->getDefaultPath() + m->getSimpleName(nameFileNames[i]);
+ m->mothurOut("Unable to open " + nameFileNames[i] + ". Trying default " + tryPath); m->mothurOutEndLine();
+ ifstream in2;
+ ableToOpen = m->openInputFile(tryPath, in2, "noerror");
+ in2.close();
+ nameFileNames[i] = tryPath;
+ }
+ }
+
+ //if you can't open it, try default location
+ if (ableToOpen == 1) {
+ if (m->getOutputDir() != "") { //default path is set
+ string tryPath = m->getOutputDir() + m->getSimpleName(nameFileNames[i]);
+ m->mothurOut("Unable to open " + nameFileNames[i] + ". Trying output directory " + tryPath); m->mothurOutEndLine();
+ ifstream in2;
+ ableToOpen = m->openInputFile(tryPath, in2, "noerror");
+ in2.close();
+ nameFileNames[i] = tryPath;
+ }
+ }
+
+ in.close();
+
+ if (ableToOpen == 1) {
+ m->mothurOut("Unable to open " + nameFileNames[i] + ". It will be disregarded."); m->mothurOutEndLine();
+ //erase from file list
+ nameFileNames.erase(nameFileNames.begin()+i);
+ i--;
+ }else {
+ m->setNameFile(nameFileNames[i]);
+ }
+ }
}
//make sure there is at least one valid file left
}
}
- string temp = validParameter.validFile(parameters, "processors", false); if (temp == "not found") { temp = "1"; }
- convert(temp, processors);
+ string temp = validParameter.validFile(parameters, "processors", false); if (temp == "not found"){ temp = m->getProcessors(); }
+ m->setProcessors(temp);
+ m->mothurConvert(temp, processors);
+
+ temp = validParameter.validFile(parameters, "save", false); if (temp == "not found"){ temp = "f"; }
+ save = m->isTrue(temp);
+ rdb->save = save;
+ if (save) { //clear out old references
+ rdb->clearMemory();
+ }
+
+ //this has to go after save so that if the user sets save=t and provides no reference we abort
+ templatefile = validParameter.validFile(parameters, "reference", true);
+ if (templatefile == "not found") {
+ //check for saved reference sequences
+ if (rdb->referenceSeqs.size() != 0) {
+ templatefile = "saved";
+ }else {
+ m->mothurOut("[ERROR]: You don't have any saved reference sequences and the reference parameter is a required.");
+ m->mothurOutEndLine();
+ abort = true;
+ }
+ }else if (templatefile == "not open") { abort = true; }
+ else { if (save) { rdb->setSavedReference(templatefile); } }
+
temp = validParameter.validFile(parameters, "ksize", false); if (temp == "not found") { temp = "7"; }
- convert(temp, ksize);
+ m->mothurConvert(temp, ksize);
temp = validParameter.validFile(parameters, "svg", false); if (temp == "not found") { temp = "F"; }
- svg = isTrue(temp);
+ svg = m->isTrue(temp);
if (nameFileNames.size() != 0) { svg = true; }
temp = validParameter.validFile(parameters, "increment", false); if (temp == "not found") { temp = "10"; }
- convert(temp, increment);
+ m->mothurConvert(temp, increment);
}
}
catch(exception& e) {
exit(1);
}
}
-//**********************************************************************************************************************
-
-void ChimeraCheckCommand::help(){
- try {
-
- m->mothurOut("The chimera.check command reads a fastafile and templatefile and outputs potentially chimeric sequences.\n");
- m->mothurOut("This command was created using the algorythms described in CHIMERA_CHECK version 2.7 written by Niels Larsen. \n");
- m->mothurOut("The chimera.check command parameters are fasta, template, processors, ksize, increment, svg and name.\n");
- m->mothurOut("The fasta parameter allows you to enter the fasta file containing your potentially chimeric sequences, and is required. \n");
- m->mothurOut("You may enter multiple fasta files by separating their names with dashes. ie. fasta=abrecovery.fasta-amzon.fasta \n");
- m->mothurOut("The template parameter allows you to enter a template file containing known non-chimeric sequences, and is required. \n");
- m->mothurOut("The processors parameter allows you to specify how many processors you would like to use. The default is 1. \n");
- #ifdef USE_MPI
- m->mothurOut("When using MPI, the processors parameter is set to the number of MPI processes running. \n");
- #endif
- m->mothurOut("The increment parameter allows you to specify how far you move each window while finding chimeric sequences, default is 10.\n");
- m->mothurOut("The ksize parameter allows you to input kmersize, default is 7. \n");
- m->mothurOut("The svg parameter allows you to specify whether or not you would like a svg file outputted for each query sequence, default is False.\n");
- m->mothurOut("The name parameter allows you to enter a file containing names of sequences you would like .svg files for.\n");
- m->mothurOut("You may enter multiple name files by separating their names with dashes. ie. fasta=abrecovery.svg.names-amzon.svg.names \n");
- m->mothurOut("The chimera.check command should be in the following format: \n");
- m->mothurOut("chimera.check(fasta=yourFastaFile, template=yourTemplateFile, processors=yourProcessors, ksize=yourKmerSize) \n");
- m->mothurOut("Example: chimera.check(fasta=AD.fasta, template=core_set_aligned,imputed.fasta, processors=4, ksize=8) \n");
- m->mothurOut("Note: No spaces between parameter labels (i.e. fasta), '=' and parameters (i.e.yourFastaFile).\n\n");
- }
- catch(exception& e) {
- m->errorOut(e, "ChimeraCheckCommand", "help");
- exit(1);
- }
-}
-
-//***************************************************************************************************************
-
-ChimeraCheckCommand::~ChimeraCheckCommand(){ /* do nothing */ }
-
//***************************************************************************************************************
int ChimeraCheckCommand::execute(){
try{
- if (abort == true) { return 0; }
+ if (abort == true) { if (calledHelp) { return 0; } return 2; }
for (int i = 0; i < fastaFileNames.size(); i++) {
if (m->control_pressed) { delete chimera; return 0; }
- string outputFileName = outputDir + getRootName(getSimpleName(fastaFileNames[i])) + "chimeracheck.chimeras";
- outputNames.push_back(outputFileName);
+ if (outputDir == "") { outputDir = m->hasPath(fastaFileNames[i]); }//if user entered a file with a path then preserve it
+ map<string, string> variables;
+ variables["[filename]"] = outputDir + m->getRootName(m->getSimpleName(fastaFileNames[i]));
+ string outputFileName = getOutputFileName("chimera", variables);
+ outputNames.push_back(outputFileName); outputTypes["chimera"].push_back(outputFileName);
#ifdef USE_MPI
- int pid, end, numSeqsPerProcessor;
+ int pid, numSeqsPerProcessor;
int tag = 2001;
- vector<unsigned long int> MPIPos;
+ vector<unsigned long long> MPIPos;
MPI_Status status;
MPI_Comm_rank(MPI_COMM_WORLD, &pid); //find out who we are
MPI_File_open(MPI_COMM_WORLD, inFileName, inMode, MPI_INFO_NULL, &inMPI); //comm, filename, mode, info, filepointer
MPI_File_open(MPI_COMM_WORLD, outFilename, outMode, MPI_INFO_NULL, &outMPI);
- if (m->control_pressed) { MPI_File_close(&inMPI); MPI_File_close(&outMPI); for (int j = 0; j < outputNames.size(); j++) { remove(outputNames[j].c_str()); } delete chimera; return 0; }
+ if (m->control_pressed) { MPI_File_close(&inMPI); MPI_File_close(&outMPI); for (int j = 0; j < outputNames.size(); j++) { m->mothurRemove(outputNames[j]); } outputTypes.clear(); delete chimera; return 0; }
if (pid == 0) { //you are the root process
- MPIPos = setFilePosFasta(fastaFileNames[i], numSeqs); //fills MPIPos, returns numSeqs
+ MPIPos = m->setFilePosFasta(fastaFileNames[i], numSeqs); //fills MPIPos, returns numSeqs
//send file positions to all processes
for(int j = 1; j < processors; j++) {
//align your part
driverMPI(startIndex, numSeqsPerProcessor, inMPI, outMPI, MPIPos);
- if (m->control_pressed) { MPI_File_close(&inMPI); MPI_File_close(&outMPI); for (int j = 0; j < outputNames.size(); j++) { remove(outputNames[j].c_str()); } delete chimera; return 0; }
+ if (m->control_pressed) { MPI_File_close(&inMPI); MPI_File_close(&outMPI); for (int j = 0; j < outputNames.size(); j++) { m->mothurRemove(outputNames[j]); } outputTypes.clear(); delete chimera; return 0; }
//wait on chidren
for(int j = 1; j < processors; j++) {
- char buf[4];
- MPI_Recv(buf, 4, MPI_CHAR, j, tag, MPI_COMM_WORLD, &status);
+ char buf[5];
+ MPI_Recv(buf, 5, MPI_CHAR, j, tag, MPI_COMM_WORLD, &status);
}
}else{ //you are a child process
MPI_Recv(&numSeqs, 1, MPI_INT, 0, tag, MPI_COMM_WORLD, &status);
//align your part
driverMPI(startIndex, numSeqsPerProcessor, inMPI, outMPI, MPIPos);
- if (m->control_pressed) { MPI_File_close(&inMPI); MPI_File_close(&outMPI); for (int j = 0; j < outputNames.size(); j++) { remove(outputNames[j].c_str()); } delete chimera; return 0; }
+ if (m->control_pressed) { MPI_File_close(&inMPI); MPI_File_close(&outMPI); for (int j = 0; j < outputNames.size(); j++) { m->mothurRemove(outputNames[j]); } outputTypes.clear(); delete chimera; return 0; }
//tell parent you are done.
- char buf[4];
+ char buf[5];
strcpy(buf, "done");
- MPI_Send(buf, 4, MPI_CHAR, 0, tag, MPI_COMM_WORLD);
+ MPI_Send(buf, 5, MPI_CHAR, 0, tag, MPI_COMM_WORLD);
}
//close files
MPI_Barrier(MPI_COMM_WORLD); //make everyone wait - just in case
#else
- vector<unsigned long int> positions = divideFile(fastaFileNames[i], processors);
-
- for (int s = 0; s < (positions.size()-1); s++) {
- lines.push_back(new linePair(positions[s], positions[(s+1)]));
- }
+
//break up file
- #if defined (__APPLE__) || (__MACH__) || (linux) || (__linux)
+ #if defined (__APPLE__) || (__MACH__) || (linux) || (__linux) || (__linux__) || (__unix__) || (__unix)
+ vector<unsigned long long> positions = m->divideFile(fastaFileNames[i], processors);
+
+ for (int s = 0; s < (positions.size()-1); s++) {
+ lines.push_back(new linePair(positions[s], positions[(s+1)]));
+ }
+
if(processors == 1){
numSeqs = driver(lines[0], outputFileName, fastaFileNames[i]);
- if (m->control_pressed) { for (int j = 0; j < outputNames.size(); j++) { remove(outputNames[j].c_str()); } for (int j = 0; j < lines.size(); j++) { delete lines[j]; } lines.clear(); delete chimera; return 0; }
+ if (m->control_pressed) { for (int j = 0; j < outputNames.size(); j++) { m->mothurRemove(outputNames[j]); } for (int j = 0; j < lines.size(); j++) { delete lines[j]; } outputTypes.clear(); lines.clear(); delete chimera; return 0; }
}else{
processIDS.resize(0);
//append output files
for(int j=1;j<processors;j++){
- appendFiles((outputFileName + toString(processIDS[j]) + ".temp"), outputFileName);
- remove((outputFileName + toString(processIDS[j]) + ".temp").c_str());
+ m->appendFiles((outputFileName + toString(processIDS[j]) + ".temp"), outputFileName);
+ m->mothurRemove((outputFileName + toString(processIDS[j]) + ".temp"));
}
if (m->control_pressed) {
- for (int j = 0; j < outputNames.size(); j++) { remove(outputNames[j].c_str()); }
+ for (int j = 0; j < outputNames.size(); j++) { m->mothurRemove(outputNames[j]); } outputTypes.clear();
for (int j = 0; j < lines.size(); j++) { delete lines[j]; } lines.clear();
delete chimera;
return 0;
}
#else
+ lines.push_back(new linePair(0, 1000));
numSeqs = driver(lines[0], outputFileName, fastaFileNames[i]);
- if (m->control_pressed) { for (int j = 0; j < lines.size(); j++) { delete lines[j]; } lines.clear(); for (int j = 0; j < outputNames.size(); j++) { remove(outputNames[j].c_str()); } delete chimera; return 0; }
+ if (m->control_pressed) { for (int j = 0; j < lines.size(); j++) { delete lines[j]; } lines.clear(); for (int j = 0; j < outputNames.size(); j++) { m->mothurRemove(outputNames[j]); } outputTypes.clear(); delete chimera; return 0; }
#endif
#endif
delete chimera;
int ChimeraCheckCommand::driver(linePair* filePos, string outputFName, string filename){
try {
ofstream out;
- openOutputFile(outputFName, out);
+ m->openOutputFile(outputFName, out);
ofstream out2;
ifstream inFASTA;
- openInputFile(filename, inFASTA);
+ m->openInputFile(filename, inFASTA);
inFASTA.seekg(filePos->start);
if (m->control_pressed) { return 1; }
- Sequence* candidateSeq = new Sequence(inFASTA); gobble(inFASTA);
+ Sequence* candidateSeq = new Sequence(inFASTA); m->gobble(inFASTA);
if (candidateSeq->getName() != "") { //incase there is a commented sequence at the end of a file
//find chimeras
}
delete candidateSeq;
- unsigned long int pos = inFASTA.tellg();
- if ((pos == -1) || (pos >= filePos->end)) { break; }
+ #if defined (__APPLE__) || (__MACH__) || (linux) || (__linux) || (__linux__) || (__unix__) || (__unix)
+ unsigned long long pos = inFASTA.tellg();
+ if ((pos == -1) || (pos >= filePos->end)) { break; }
+ #else
+ if (inFASTA.eof()) { break; }
+ #endif
//report progress
- if((count) % 100 == 0){ m->mothurOut("Processing sequence: " + toString(count)); m->mothurOutEndLine(); }
+ if((count) % 100 == 0){ m->mothurOutJustToScreen("Processing sequence: " + toString(count) + "\n"); }
}
//report progress
- if((count) % 100 != 0){ m->mothurOut("Processing sequence: " + toString(count)); m->mothurOutEndLine(); }
+ if((count) % 100 != 0){ m->mothurOutJustToScreen("Processing sequence: " + toString(count) + "\n"); }
out.close();
inFASTA.close();
}
//**********************************************************************************************************************
#ifdef USE_MPI
-int ChimeraCheckCommand::driverMPI(int start, int num, MPI_File& inMPI, MPI_File& outMPI, vector<unsigned long int>& MPIPos){
+int ChimeraCheckCommand::driverMPI(int start, int num, MPI_File& inMPI, MPI_File& outMPI, vector<unsigned long long>& MPIPos){
try {
MPI_File outAccMPI;
MPI_Status status;
istringstream iss (tempBuf,istringstream::in);
delete buf4;
- Sequence* candidateSeq = new Sequence(iss); gobble(iss);
+ Sequence* candidateSeq = new Sequence(iss); m->gobble(iss);
if (candidateSeq->getName() != "") { //incase there is a commented sequence at the end of a file
//find chimeras
delete candidateSeq;
//report progress
- if((i+1) % 100 == 0){ cout << "Processing sequence: " << (i+1) << endl; m->mothurOutJustToLog("Processing sequence: " + toString(i+1) + "\n"); }
+ if((i+1) % 100 == 0){ cout << "Processing sequence: " << (i+1) << endl; }
}
//report progress
- if(num % 100 != 0){ cout << "Processing sequence: " << num << endl; m->mothurOutJustToLog("Processing sequence: " + toString(num) + "\n"); }
+ if(num % 100 != 0){ cout << "Processing sequence: " << num << endl; }
return 0;
}
int ChimeraCheckCommand::createProcesses(string outputFileName, string filename) {
try {
-#if defined (__APPLE__) || (__MACH__) || (linux) || (__linux)
+#if defined (__APPLE__) || (__MACH__) || (linux) || (__linux) || (__linux__) || (__unix__) || (__unix)
int process = 0;
int num = 0;
//pass numSeqs to parent
ofstream out;
string tempFile = outputFileName + toString(getpid()) + ".num.temp";
- openOutputFile(tempFile, out);
+ m->openOutputFile(tempFile, out);
out << num << endl;
out.close();
exit(0);
- }else { m->mothurOut("unable to spawn the necessary processes."); m->mothurOutEndLine(); exit(0); }
+ }else {
+ m->mothurOut("[ERROR]: unable to spawn the necessary processes."); m->mothurOutEndLine();
+ for (int i = 0; i < processIDS.size(); i++) { kill (processIDS[i], SIGINT); }
+ exit(0);
+ }
}
//force parent to wait until all the processes are done
for (int i = 0; i < processIDS.size(); i++) {
ifstream in;
string tempFile = outputFileName + toString(processIDS[i]) + ".num.temp";
- openInputFile(tempFile, in);
+ m->openInputFile(tempFile, in);
if (!in.eof()) { int tempNum = 0; in >> tempNum; num += tempNum; }
- in.close(); remove(tempFile.c_str());
+ in.close(); m->mothurRemove(tempFile);
}
return num;
projects / mothur.git / blobdiff