Documentation fix for compatibility with texinfo 5.1

Patch by Don Armstrong (minus the @top change in changes.tely)

Fixes issue 3382.
http://code.google.com/p/lilypond/issues/detail?id=3382

diff --git a/Documentation/contributor/quick-start.itexi b/Documentation/contributor/quick-start.itexi
index 4788379f4ce1b1c56a94d2e1c98da385dd418173..7fab3911fd731133e655cb6ffd57be040f1030b7 100644 (file)
--- a/Documentation/contributor/quick-start.itexi
+++ b/Documentation/contributor/quick-start.itexi
@@ -344,7 +344,7 @@ to @ref{Compiling with LilyDev} before reading on.
 @warning{Throughout the rest of this manual, most command-line
 input should be entered from @file{~/lilypond-git/}.  This is
 known as the @emph{top source directory} and is often referred to as
-@var{$LILYPOND_GIT}}.
+@var{$LILYPOND_GIT}.}
 
 @warning{Only work on one set of changes at once.  Do not start
 work on any new changes until your first set has been accepted.}

diff --git a/Documentation/included/compile.itexi b/Documentation/included/compile.itexi
index 94513ea93612eec0d13284ac6ceac53996d035e2..cc2894019faf699194c5499614f71d772a22fb6b 100644 (file)
--- a/Documentation/included/compile.itexi
+++ b/Documentation/included/compile.itexi
@@ -922,7 +922,7 @@ bug reports to @email{bug-lilypond@@gnu.org}.
 
 Bugs that are not fault of LilyPond are documented here.
 
-@unnumberedsubsubsec Bison 1.875
+@unnumberedsubsec Bison 1.875
 
 There is a bug in bison-1.875: compilation fails with "parse error
 before `goto'" in line 4922 due to a bug in bison.  To fix, please
@@ -937,7 +937,7 @@ $ make
 @end example
 
 
-@unnumberedsubsubsec Compiling on MacOS@tie{}X
+@unnumberedsubsec Compiling on MacOS@tie{}X
 
 Here are special instructions for compiling under MacOS@tie{}X.
 These instructions assume that dependencies are installed using
@@ -989,7 +989,7 @@ automatic font detection, add
 @end example
 
 
-@unnumberedsubsubsec Solaris
+@unnumberedsubsec Solaris
 
 Solaris7, ./configure
 
@@ -1008,7 +1008,7 @@ or
 CONFIG_SHELL=/bin/bash bash -c ./configure
 @end example
 
-@unnumberedsubsubsec FreeBSD
+@unnumberedsubsec FreeBSD
 
 To use system fonts, dejaview must be installed.  With the default
 port, the fonts are installed in @file{usr/X11R6/lib/X11/fonts/dejavu}.
@@ -1022,7 +1022,7 @@ for your hierarchy.)
 @end example
 
 
-@unnumberedsubsubsec International fonts
+@unnumberedsubsec International fonts
 
 On Mac OS X, all fonts are installed by default.  However, finding all
 system fonts requires a bit of configuration; see
@@ -1049,7 +1049,7 @@ Debian GNU/Linux
 @end verbatim
 
 
-@unnumberedsubsubsec Using lilypond python libraries
+@unnumberedsubsec Using lilypond python libraries
 
 If you want to use lilypond's python libraries (either running
 certain build scripts manually, or using them in other programs),
@@ -1123,7 +1123,7 @@ We currently use make and stepmake, which is complicated and only
 used by us.  Hopefully this will change in the future.
 
 
-@subsubheading Version-specific texinfo macros
+@subheading Version-specific texinfo macros
 
 @itemize
 

diff --git a/Documentation/topdocs/INSTALL.texi b/Documentation/topdocs/INSTALL.texi
index 47f0a7070361123d6db15700fcef074960b3b2c8..b562cc4d687f66b241d414be82bc3ffb5b7a722a 100644 (file)
--- a/Documentation/topdocs/INSTALL.texi
+++ b/Documentation/topdocs/INSTALL.texi
@@ -10,9 +10,18 @@
 @node Top
 @top
 
+@menu
+* Compilation::
+@end menu
+
+
 @contents
 
 @include macros.itexi
+
+@node Compilation
+@chapter Compilation
+
 @include included/compile.itexi
 
 @bye

diff --git a/Documentation/usage/lilypond-book.itely b/Documentation/usage/lilypond-book.itely
index 65c5823d08e0bbd4eff38e18d9dffd76ef95b29e..c14c49b43b3bcfd5f9c76715e82fa90b7a08c864 100644 (file)
--- a/Documentation/usage/lilypond-book.itely
+++ b/Documentation/usage/lilypond-book.itely
@@ -1003,20 +1003,20 @@ cd out
 @dots{}
 @end example
 
-@itemx --skip-lily-check
+@item --skip-lily-check
 Do not fail if no lilypond output is found.  It is used for LilyPond
 Info documentation without images.
 
-@itemx --skip-png-check
+@item --skip-png-check
 Do not fail if no PNG images are found for EPS files.  It is used for
 LilyPond Info documentation without images.
 
-@itemx --lily-output-dir=@var{dir}
+@item --lily-output-dir=@var{dir}
 Write lily-XXX files to directory @var{dir}, link into @option{--output}
 directory.  Use this option to save building time for documents in
 different directories which share a lot of identical snippets.
 
-@itemx --lily-loglevel=@var{loglevel}
+@item --lily-loglevel=@var{loglevel}
 Set the output verbosity of the invoked @command{lilypond} calls to
 @var{loglevel}.  Possible values are @code{NONE}, @code{ERROR},
 @code{WARNING}, @code{BASIC_PROGRESS}, @code{PROGRESS}, @code{INFO}
@@ -1025,16 +1025,16 @@ environment variable @code{LILYPOND_LOGLEVEL} is set, its value is used
 as the loglevel.
 
 
-@itemx --info-images-dir=@var{dir}
+@item --info-images-dir=@var{dir}
 Format Texinfo output so that Info will look for images of music in
 @var{dir}.
 
-@itemx --latex-program=@var{prog}
+@item --latex-program=@var{prog}
 Run executable @command{prog} instead of @command{latex}.  This is
 useful if your document is processed with @command{xelatex}, for
 example.
 
-@itemx --left-padding=@var{amount}
+@item --left-padding=@var{amount}
 Pad EPS boxes by this much.  @var{amount} is measured in millimeters,
 and is 3.0 by default.  This option should be used if the lines of
 music stick out of the right margin.
@@ -1057,7 +1057,7 @@ Create PDF files for use with PDF@LaTeX{}.
 By default, output is displayed on the terminal.  This option redirects
 all output to log files in the same directory as the source files.
 
-@itemx --use-source-file-names
+@item --use-source-file-names
 Write snippet output files with the same base name as their source file.
 This option works only for snippets included with @code{lilypondfile}
 and only if directories implied by @option{--output-dir} and