% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2006-02-13.16}
+\def\texinfoversion{2006-06-01.17}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
%
\def\parsearg{\parseargusing{}}
\def\parseargusing#1#2{%
- \def\next{#2}%
+ \def\argtorun{#2}%
\begingroup
\obeylines
\spaceisspace
\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
\def\temp{#3}%
\ifx\temp\empty
- % We cannot use \next here, as it holds the macro to run;
- % thus we reuse \temp.
+ % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
\let\temp\finishparsearg
\else
\let\temp\argcheckspaces
% If a _delimited_ argument is enclosed in braces, they get stripped; so
% to get _exactly_ the rest of the line, we had to prevent such situation.
% We prepended an \empty token at the very beginning and we expand it now,
-% just before passing the control to \next.
+% just before passing the control to \argtorun.
% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
% either the null string, or it ends with \^^M---thus there is no danger
% that a pair of braces would be stripped.
%
% But first, we have to remove the trailing space token.
%
-\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
% \parseargdef\foo{...}
% is roughly equivalent to
\def\minus{$-$}
% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em. So do
+% whichever is larger.
%
\def\dots{%
\leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil
- .\hfil.\hfil.%
- \hskip 0pt plus 0.5fil
+ \setbox0=\hbox{...}% get width of three periods
+ \ifdim\wd0 > 1.5em
+ \dimen0 = \wd0
+ \else
+ \dimen0 = 1.5em
+ \fi
+ \hbox to \dimen0{%
+ \hskip 0pt plus.25fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus.5fil
}%
}
\ifpdf
\input pdfcolor
\pdfcatalog{/PageMode /UseOutlines}%
+ % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
\def\dopdfimage#1#2#3{%
- \def\imagewidth{#2}%
- \def\imageheight{#3}%
+ \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+ \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
% without \immediate, pdftex seg faults when the same image is
% included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
\ifnum\pdftexversion < 14
\else
\immediate\pdfximage
\fi
- \ifx\empty\imagewidth\else width \imagewidth \fi
- \ifx\empty\imageheight\else height \imageheight \fi
+ \ifdim \wd0 >0pt width \imagewidth \fi
+ \ifdim \wd2 >0pt height \imageheight \fi
\ifnum\pdftexversion<13
#1.pdf%
\else
% We don't need math for this font style.
\def\ttsl{\setfontstyle{ttsl}}
+
% Default leading.
\newdimen\textleading \textleading = 13.2pt
}%
}
+
% Set the font macro #1 to the font named #2, adding on the
% specified font prefix (normally `cm').
% #3 is the font's design size, #4 is a scale factor
\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
% Use cm as the default font prefix.
% To specify the font prefix, you must define \fontprefix
% before you read in texinfo.tex.
\def\scshape{csc}
\def\scbshape{csc}
+% Definitions for a main text size of 11pt. This is the default in
+% Texinfo.
+%
+\def\definetextfontsizexi{
% Text fonts (11.2pt, magstep1).
\def\textnominalsize{11pt}
\edef\mainmagstep{\magstephalf}
\font\reducedi=cmmi10
\font\reducedsy=cmsy10
+% reset the current fonts
+\textfonts
+\rm
+} % end of 11pt text font size definitions
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit. This is for the GNU
+% Press printing of the Emacs 22 manual. Maybe other manuals in the
+% future. Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}
+\setfont\deftt\ttshape{10}{\magstephalf}
+\setfont\defttsl\ttslshape{10}{\magstephalf}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}
+\setfont\chapit\itbshape{10}{\magstep2}
+\setfont\chapsl\slbshape{10}{\magstep2}
+\setfont\chaptt\ttbshape{12}{\magstep1}
+\setfont\chapttsl\ttslshape{10}{\magstep2}
+\setfont\chapsf\sfbshape{12}{\magstep1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}
+\setfont\secit\itbshape{10}{\magstep1}
+\setfont\secsl\slbshape{10}{\magstep1}
+\setfont\sectt\ttbshape{12}{1000}
+\setfont\secttsl\ttslshape{10}{\magstep1}
+\setfont\secsf\sfbshape{12}{1000}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}
+\setfont\ssecit\itbshape{10}{1000}
+\setfont\ssecsl\slbshape{10}{1000}
+\setfont\ssectt\ttbshape{10}{1000}
+\setfont\ssecttsl\ttslshape{10}{1000}
+\setfont\ssecsf\sfbshape{10}{1000}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}
+\setfont\reducedtt\ttshape{9}{1000}
+\setfont\reducedbf\bfshape{10}{900}
+\setfont\reducedit\itshape{9}{1000}
+\setfont\reducedsl\slshape{9}{1000}
+\setfont\reducedsf\sfshape{9}{1000}
+\setfont\reducedsc\scshape{10}{900}
+\setfont\reducedttsl\ttslshape{10}{900}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+
+% reduce space between paragraphs
+\divide\parskip by 2
+
+% reset the current fonts
+\textfonts
+\rm
+} % end of 10pt text font size definitions
+
+
+% We provide the user-level command
+% @fonttextsize 10
+% (or 11) to redefine the text font size. pt is assumed.
+%
+\def\xword{10}
+\def\xiword{11}
+%
+\parseargdef\fonttextsize{%
+ \def\textsizearg{#1}%
+ \wlog{doing @fonttextsize \textsizearg}%
+ %
+ % Set \globaldefs so that documents can use this inside @tex, since
+ % makeinfo 4.8 does not support it, but we need it nonetheless.
+ %
+ \begingroup \globaldefs=1
+ \ifx\textsizearg\xword \definetextfontsizex
+ \else \ifx\textsizearg\xiword \definetextfontsizexi
+ \else
+ \errhelp=\EMsimple
+ \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+ \fi\fi
+ \endgroup
+}
+
+
% In order for the font changes to affect most math symbols and letters,
% we have to define the \textfont of the standard families. Since
% texinfo doesn't allow for producing subscripts and superscripts except
% Set up the default fonts, so we can use them for creating boxes.
%
-\textfonts \rm
+\definetextfontsizexi
% Define these so they can be easily changed for other fonts.
\def\angleleft{$\langle$}
\escapechar = `\\ % use backslash in output files.
\def\@{@}% change to @@ when we switch to @ as escape char in index files.
\def\ {\realbackslash\space }%
+ %
% Need these in case \tex is in effect and \{ is a \delimiter again.
% But can't use \lbracecmd and \rbracecmd because texindex assumes
% braces and backslashes are used only as delimiters.
% The above is not enough to reproduce the bug, but it gives the flavor.
%
% Sample whatsit resulting:
- % address@hidden@folio address@hidden address@hidden }}}
+ % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
%
% So:
\let\endinput = \empty
\ifx\temptype\Ynothingkeyword
\setbox0 = \hbox{}%
\def\toctype{unnchap}%
+ \gdef\thischapternum{}%
\gdef\thischapter{#1}%
\else\ifx\temptype\Yomitfromtockeyword
\setbox0 = \hbox{}% contents like unnumbered, but no toc entry
\def\toctype{omit}%
+ \gdef\thischapternum{}%
\gdef\thischapter{}%
\else\ifx\temptype\Yappendixkeyword
\setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
\def\toctype{app}%
+ \xdef\thischapternum{\appendixletter}%
% We don't substitute the actual chapter name into \thischapter
% because we don't want its macros evaluated now. And we don't
% use \thissection because that changes with each section.
\else
\setbox0 = \hbox{#3\enspace}%
\def\toctype{numchap}%
+ \xdef\thischapternum{\the\chapno}%
\xdef\thischapter{\putwordChapter{} \the\chapno:
\noexpand\thischaptername}%
\fi\fi\fi
\let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
\gobble % eat return
}
+
% @display/@smalldisplay: same as @lisp except keep current font.
%
\makedispenv {display}{%
\spaceisspace
%
% Append \endinput to make sure that TeX does not see the ending newline.
- %
% I've verified that it is necessary both for e-TeX and for ordinary TeX
% --kasal, 29nov03
\scantokens{#1\endinput}%
% {. If so it reads up to the closing }, if not, it reads the whole
% line. Whatever was read is then fed to the next control sequence
% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup\else
\expandafter\parsearg
- \fi \next}
+ \fi \macnamexxx}
% @alias.
projects / lilypond.git / commitdiff