% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2016-03-29.15}
+\def\texinfoversion{2016-05-26.20}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
\everyjob{\message{[Texinfo version \texinfoversion]}%
\catcode`+=\active \catcode`\_=\active}
+% LaTeX's \typeout. This ensures that the messages it is used for
+% are identical in format to the corresponding ones from latex/pdflatex.
+\def\typeout{\immediate\write17}%
+
\chardef\other=12
% We never want plain's \outer definition of \+ in Texinfo.
%
% PDF outline support
%
- \pdfmakepagedesttrue \relax
% Emulate the primitive of pdfTeX
\def\pdfdest name#1 xyz{%
\special{pdf:dest (name#1) [@thispage /XYZ @xpos @ypos]}%
% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
% Unless we're in typewriter, use \ecfont because the CM text fonts do
% not have braces, and we don't want to switch into math.
-\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
-\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\def\mylbrace{{\ifmonospace\char123\else\ensuremath\lbrace\fi}}
+\def\myrbrace{{\ifmonospace\char125\else\ensuremath\rbrace\fi}}
\let\{=\mylbrace \let\lbracechar=\{
\let\}=\myrbrace \let\rbracechar=\}
\begingroup
\fi
}
+% Like \expandablevalue, but completely expandable (the \message in the
+% definition above operates at the execution level of TeX). Used when
+% writing to auxiliary files, due to the expansion that \write does.
+%
+% NB flag names containing - or _ may not work here.
+\def\dummyvalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ [No value for ``#1'']%
+ \else
+ \csname SET#1\endcsname
+ \fi
+}
+
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
%
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
-% Used when writing an index entry out to an index file, to prevent
+% Used when writing an index entry out to an index file to prevent
% expansion of Texinfo commands that can appear in an index entry.
%
\def\indexdummies{%
%
% We want to disable all macros so that they are not expanded by \write.
\macrolist
+ \let\value\dummyvalue
%
\normalturnoffactive
- %
- % Handle some cases of @value -- where it does not contain any
- % (non-fully-expandable) commands.
- \makevalueexpandable
}
% \commondummiesnofonts: common to \commondummies and \indexnofonts.
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate here prevents an object entering into the current box,
- % which could confound checks such as those in \safewhatsit for preceding
- % skips.
+ % Using \immediate above here prevents an object entering into the current
+ % box, which could confound checks such as those in \safewhatsit for
+ % preceding skips.
+ \typeout{Writing index file \jobname.\suffix}%
\fi}
\def\indexisfl{fl}
% index. The easiest way to prevent this problem is to make sure
% there is some text.
\putwordIndexNonexistent
+ \typeout{No file \jobname.\indexname s.}%
\else
\catcode`\\ = 0
- \escapechar = `\\
%
% If the index file exists but is empty, then \openin leaves \ifeof
% false. We have to make TeX try to read something from the file, so
% 1 and 2 (the page numbers aren't printed), and so are the first
% two pages of the document. Thus, we'd have two destinations named
% `1', and two named `2'.
- \ifpdf \global\pdfmakepagedesttrue \fi
+ \ifpdf
+ \global\pdfmakepagedesttrue
+ \else
+ \ifx\XeTeXrevision\thisisundefined
+ \else
+ \global\pdfmakepagedesttrue
+ \fi
+ \fi
}
\catcode `\>=\other
\catcode `\`=\other
\catcode `\'=\other
- \escapechar=`\\
%
% ' is active in math mode (mathcode"8000). So reset it, and all our
% other math active characters (just in case), to plain's definitions.
% alias because \c means cedilla in @tex or @math
\let\texinfoc=\c
+\newcount\savedcatcodeone
+\newcount\savedcatcodetwo
+
% Used at the time of macro expansion.
% Argument is macro body with arguments substituted
\def\scanmacro#1{%
\newlinechar`\^^M
\def\xeatspaces{\eatspaces}%
%
+ % Temporarily undo catcode changes of \printindex. Set catcode of @ to
+ % 0 so that @-commands in macro expansions aren't printed literally when
+ % formatting an index file, where \ is used as the escape character.
+ \savedcatcodeone=\catcode`\@
+ \savedcatcodetwo=\catcode`\\
+ \catcode`\@=0
+ \catcode`\\=\active
+ %
% Process the macro body under the current catcode regime.
- \scantokens{#1\texinfoc}\aftermacro%
+ \scantokens{#1@texinfoc}\aftermacro%
+ %
+ \catcode`\@=\savedcatcodeone
+ \catcode`\\=\savedcatcodetwo
%
% The \texinfoc is to remove the \newlinechar added by \scantokens, and
% can be noticed by \parsearg.
{%
\requireauxfile
\atdummies % preserve commands, but don't expand them
+ % match definition in \xrdef, \refx, \xrefX.
+ \def\value##1{##1}%
\edef\writexrdef##1##2{%
\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
##1}{##2}}% these are parameters of \writexrdef
% include an _ in the xref name, etc.
\indexnofonts
\turnoffactive
+ \def\value##1{##1}%
\expandafter\global\expandafter\let\expandafter\Xthisreftitle
\csname XR#1-title\endcsname
}%
\fi\fi\fi
}
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-%
+% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX
+% is output afterwards if non-empty.
\def\refx#1#2{%
\requireauxfile
{%
\indexnofonts
\otherbackslash
+ \def\value##1{##1}%
\expandafter\global\expandafter\let\expandafter\thisrefX
\csname XR#1\endcsname
}%
#2% Output the suffix in any case.
}
-% This is the macro invoked by entries in the aux file. Usually it's
-% just a \def (we prepend XR to the control sequence name to avoid
-% collisions). But if this is a float type, we have more work to do.
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
+% type, we have more work to do.
%
\def\xrdef#1#2{%
- {% The node name might contain 8-bit characters, which in our current
- % implementation are changed to commands like @'e. Don't let these
- % mess up the control sequence name.
+ {% Expand the node or anchor name to remove control sequences.
+ % \turnoffactive stops 8-bit characters being changed to commands
+ % like @'e. \refx does the same to retrieve the value in the definition.
\indexnofonts
\turnoffactive
+ \def\value##1{##1}%
\xdef\safexrefname{#1}%
}%
%
projects / lilypond.git / commitdiff