% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2016-05-26.20}
+\def\texinfoversion{2016-07-20.14}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
\ifx\pdfescapestring\thisisundefined
% No primitive available; should we give a warning or log?
% Many times it won't matter.
+ \xdef#1{#1}%
\else
% The expandable \pdfescapestring primitive escapes parentheses,
% backslashes, and other special chars.
% We have to set dummies so commands such as @code, and characters
% such as \, aren't expanded when present in a section title.
\indexnofonts
- \turnoffactive
\makevalueexpandable
+ \turnoffactive
+ % Use ASCII approximations in destination names.
+ \passthroughcharsfalse
\def\pdfdestname{#1}%
\txiescapepdf\pdfdestname
\safewhatsit{\pdfdest name{\pdfdestname} xyz}%
\fi
%
% Also escape PDF chars in the display string.
- \edef\pdfoutlinetext{#1}%
- \txiescapepdf\pdfoutlinetext
+ \bgroup
+ \ifx \declaredencoding \latone
+ % The PDF format can use an extended form of Latin-1 in bookmark
+ % strings. See Appendix D of the PDF Reference, Sixth Edition, for
+ % the "PDFDocEncoding".
+ \passthroughcharstrue
+ \fi
+ \ifx \declaredencoding \utfeight
+ % TODO: the PDF format can use UTF-16 in bookmark strings, but the
+ % code for this isn't done yet.
+ \fi
+ \globaldefs=1
+ \edef\pdfoutlinetext{#1}%
+ \txiescapepdf\pdfoutlinetext
+ \egroup
%
\pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
}
%
% XeTeX version check
%
- \ifnum\strcmp{\the\XeTeXversion\XeTeXrevision}{0.99995}>-1
+ \ifnum\strcmp{\the\XeTeXversion\XeTeXrevision}{0.99996}>-1
+ % TeX Live 2016 contains XeTeX 0.99996 and xdvipdfmx 20160307.
+ % It can be used `dvipdfmx:config' special (from TeX Live SVN r40941).
+ % For avoiding PDF destination name replacement, we use the special
+ % instead of xdvipdfmx commandline option `-C 0x0010'.
+ \special{dvipdfmx:config C 0x0010}
% XeTeX 0.99995+ contains xdvipdfmx 20160307+.
% It can handle Unicode destination name for PDF.
\txiuseunicodedestnametrue
\else
+ % XeTeX < 0.99996 (TeX Live < 2016) cannot be used
+ % `dvipdfmx:config' special.
+ % So for avoiding PDF destination name replacement,
+ % xdvipdfmx commandline option `-C 0x0010' is necessary.
+ %
% XeTeX < 0.99995 can not handle Unicode destination name for PDF
% because xdvipdfmx 20150315 has UTF-16 convert issue.
% It fixed by xdvipdfmx 20160106 (TeX Live SVN r39753).
%
% Emulate the primitive of pdfTeX
\def\pdfdest name#1 xyz{%
- \special{pdf:dest (name#1) [@thispage /XYZ @xpos @ypos]}%
+ \special{pdf:dest (name#1) [@thispage /XYZ @xpos @ypos null]}%
}
\def\pdfmkdest#1{{%
% We have to set dummies so commands such as @code, and characters
\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x).
+% Tables -- @table, @ftable, @ktable, @vtable, @item(x).
% default indentation of table text
\newdimen\tableindent \tableindent=.8in
% used internally for \itemindent minus \itemmargin
\newdimen\itemmax
-% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% Note @table, @ftable, @ktable and @vtable define @item, @itemx, etc., with
% these defs.
% They also define \itemindex
% to index the item name in whatever manner is desired (perhaps none).
\def\item{\errmessage{@item while not in a list environment}}
\def\itemx{\errmessage{@itemx while not in a list environment}}
-% @table, @ftable, @vtable.
+% @table, @ftable, @ktable, @vtable.
\envdef\table{%
\let\itemindex\gobble
\tablecheck{table}%
\def\itemindex ##1{\doind {fn}{\code{##1}}}%
\tablecheck{ftable}%
}
+\envdef\ktable{%
+ \def\itemindex ##1{\doind {ky}{\code{##1}}}%
+ \tablecheck{ktable}%
+}
\envdef\vtable{%
\def\itemindex ##1{\doind {vr}{\code{##1}}}%
\tablecheck{vtable}%
}
\def\Etable{\endgraf\afterenvbreak}
\let\Eftable\Etable
+\let\Ektable\Etable
\let\Evtable\Etable
\let\Eitemize\Etable
\let\Eenumerate\Etable
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
+% If flag is undefined, pass through an unexpanded @value command: maybe it
+% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
\def\dummyvalue#1{%
\expandafter\ifx\csname SET#1\endcsname\relax
- [No value for ``#1'']%
+ \noexpand\value{#1}%
+ \else
+ \csname SET#1\endcsname
+ \fi
+}
+
+% Used for @value's in index entries to form the sort key: expand the @value
+% if possible, otherwise sort late.
+\def\indexnofontsvalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ ZZZZZZZ
\else
\csname SET#1\endcsname
\fi
% Define \doindex, the driver for all index macros.
% Argument #1 is generated by the calling \fooindex macro,
-% and it the two-letter name of the index.
+% and it is the two-letter name of the index.
\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx}
\def\doindexxxx #1{\doind{\indexname}{#1}}
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
+\f
% Used when writing an index entry out to an index file to prevent
% expansion of Texinfo commands that can appear in an index entry.
%
\def\}{{\tt\char125}}%
%
% Do the redefinitions.
- \commondummies
+ \definedummies
}
+% Used for the aux and toc files, where @ is the escape character.
+%
% For the aux and toc files, @ is the escape character. So we want to
% redefine everything using @ as the escape character (instead of
% \realbackslash, still used for index files). When everything uses @,
\let\} = \rbraceatcmd
%
% Do the redefinitions.
- \commondummies
+ \definedummies
\otherbackslash
}
-% Called from \indexdummies and \atdummies.
+% \definedummyword defines \#1 as \string\#1\space, thus effectively
+% preventing its expansion. This is used only for control words,
+% not control letters, because the \space would be incorrect for
+% control characters, but is needed to separate the control word
+% from whatever follows.
%
-\def\commondummies{%
- % \definedummyword defines \#1 as \string\#1\space, thus effectively
- % preventing its expansion. This is used only for control words,
- % not control letters, because the \space would be incorrect for
- % control characters, but is needed to separate the control word
- % from whatever follows.
- %
- % For control letters, we have \definedummyletter, which omits the
- % space.
- %
- % These can be used both for control words that take an argument and
- % those that do not. If it is followed by {arg} in the input, then
- % that will dutifully get written to the index (or wherever).
- %
- \def\definedummyword ##1{\def##1{\string##1\space}}%
- \def\definedummyletter##1{\def##1{\string##1}}%
- \let\definedummyaccent\definedummyletter
+% These can be used both for control words that take an argument and
+% those that do not. If it is followed by {arg} in the input, then
+% that will dutifully get written to the index (or wherever).
+%
+% For control letters, we have \definedummyletter, which omits the
+% space.
+%
+\def\definedummyword #1{\def#1{\string#1\space}}%
+\def\definedummyletter#1{\def#1{\string#1}}%
+\let\definedummyaccent\definedummyletter
+
+% Called from \indexdummies and \atdummies, to effectively prevent
+% the expansion of commands.
+%
+\def\definedummies{%
%
+ \let\commondummyword\definedummyword
+ \let\commondummyletter\definedummyletter
+ \let\commondummyaccent\definedummyaccent
\commondummiesnofonts
%
\definedummyletter\_%
\normalturnoffactive
}
-% \commondummiesnofonts: common to \commondummies and \indexnofonts.
-% Define \definedumyletter, \definedummyaccent and \definedummyword before
-% using.
+% \commondummiesnofonts: common to \definedummies and \indexnofonts.
+% Define \commondummyletter, \commondummyaccent and \commondummyword before
+% using. Used for accents, font commands, and various control letters.
%
\def\commondummiesnofonts{%
% Control letters and accents.
- \definedummyletter\!%
- \definedummyaccent\"%
- \definedummyaccent\'%
- \definedummyletter\*%
- \definedummyaccent\,%
- \definedummyletter\.%
- \definedummyletter\/%
- \definedummyletter\:%
- \definedummyaccent\=%
- \definedummyletter\?%
- \definedummyaccent\^%
- \definedummyaccent\`%
- \definedummyaccent\~%
- \definedummyword\u
- \definedummyword\v
- \definedummyword\H
- \definedummyword\dotaccent
- \definedummyword\ogonek
- \definedummyword\ringaccent
- \definedummyword\tieaccent
- \definedummyword\ubaraccent
- \definedummyword\udotaccent
- \definedummyword\dotless
+ \commondummyletter\!%
+ \commondummyaccent\"%
+ \commondummyaccent\'%
+ \commondummyletter\*%
+ \commondummyaccent\,%
+ \commondummyletter\.%
+ \commondummyletter\/%
+ \commondummyletter\:%
+ \commondummyaccent\=%
+ \commondummyletter\?%
+ \commondummyaccent\^%
+ \commondummyaccent\`%
+ \commondummyaccent\~%
+ \commondummyword\u
+ \commondummyword\v
+ \commondummyword\H
+ \commondummyword\dotaccent
+ \commondummyword\ogonek
+ \commondummyword\ringaccent
+ \commondummyword\tieaccent
+ \commondummyword\ubaraccent
+ \commondummyword\udotaccent
+ \commondummyword\dotless
%
% Texinfo font commands.
- \definedummyword\b
- \definedummyword\i
- \definedummyword\r
- \definedummyword\sansserif
- \definedummyword\sc
- \definedummyword\slanted
- \definedummyword\t
+ \commondummyword\b
+ \commondummyword\i
+ \commondummyword\r
+ \commondummyword\sansserif
+ \commondummyword\sc
+ \commondummyword\slanted
+ \commondummyword\t
%
% Commands that take arguments.
- \definedummyword\abbr
- \definedummyword\acronym
- \definedummyword\anchor
- \definedummyword\cite
- \definedummyword\code
- \definedummyword\command
- \definedummyword\dfn
- \definedummyword\dmn
- \definedummyword\email
- \definedummyword\emph
- \definedummyword\env
- \definedummyword\file
- \definedummyword\image
- \definedummyword\indicateurl
- \definedummyword\inforef
- \definedummyword\kbd
- \definedummyword\key
- \definedummyword\math
- \definedummyword\option
- \definedummyword\pxref
- \definedummyword\ref
- \definedummyword\samp
- \definedummyword\strong
- \definedummyword\tie
- \definedummyword\U
- \definedummyword\uref
- \definedummyword\url
- \definedummyword\var
- \definedummyword\verb
- \definedummyword\w
- \definedummyword\xref
+ \commondummyword\abbr
+ \commondummyword\acronym
+ \commondummyword\anchor
+ \commondummyword\cite
+ \commondummyword\code
+ \commondummyword\command
+ \commondummyword\dfn
+ \commondummyword\dmn
+ \commondummyword\email
+ \commondummyword\emph
+ \commondummyword\env
+ \commondummyword\file
+ \commondummyword\image
+ \commondummyword\indicateurl
+ \commondummyword\inforef
+ \commondummyword\kbd
+ \commondummyword\key
+ \commondummyword\math
+ \commondummyword\option
+ \commondummyword\pxref
+ \commondummyword\ref
+ \commondummyword\samp
+ \commondummyword\strong
+ \commondummyword\tie
+ \commondummyword\U
+ \commondummyword\uref
+ \commondummyword\url
+ \commondummyword\var
+ \commondummyword\verb
+ \commondummyword\w
+ \commondummyword\xref
}
% For testing: output @{ and @} in index sort strings as \{ and \}.
%
\def\indexnofonts{%
% Accent commands should become @asis.
- \def\definedummyaccent##1{\let##1\asis}%
+ \def\commondummyaccent##1{\let##1\asis}%
% We can just ignore other control letters.
- \def\definedummyletter##1{\let##1\empty}%
+ \def\commondummyletter##1{\let##1\empty}%
% All control words become @asis by default; overrides below.
- \let\definedummyword\definedummyaccent
+ \let\commondummyword\commondummyaccent
\commondummiesnofonts
%
% Don't no-op \tt, since it isn't a user-level command
% goes to end-of-line is not handled.
%
\macrolist
+ \let\value\indexnofontsvalue
}
+\f
+
\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
\global\advance\dimen@ by 1pt
\repeat
}%
- \multiply\dimen@ii by 4
- \divide\dimen@ii by 5
- \ifdim\ht3<\dimen@ii
- % Column heights are too different, so don't make their bottoms
- % flush with each other. The glue at the end of the second column
- % allows a second column to stretch, reducing the difference in
- % height between the two.
- \setbox0=\vbox to\dimen@{\unvbox1\vfill}%
- \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}%
+ \ifdim2\ht1>\vsize
+ % The left column has come out longer than the page itself. (Note
+ % that we have doubled \vsize for the double columns, so
+ % the actual height of the page is 0.5\vsize). Just split the last
+ % of the double column material roughly in half.
+ \setbox2=\box0
+ \setbox0 = \vsplit2 to \dimen@ii
+ \setbox0=\vbox to\dimen@ii{\unvbox0}%
+ \setbox2=\vbox to\dimen@ii{\unvbox2}%
\else
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
+ \multiply\dimen@ii by 5
+ \divide\dimen@ii by 4
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@ii
+ \global\setbox\balancedcolumns=\vbox{\pagesofar}%
+ \ifdim\ht3<\dimen@ii
+ % Column heights are too different, so don't make their bottoms
+ % flush with each other. The glue at the end of the second column
+ % allows a second column to stretch, reducing the difference in
+ % height between the two.
+ \setbox0=\vbox to\dimen@{\unvbox1\vfill}%
+ \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}%
+ \else
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ \fi
\fi
\fi
%
\newif\ifrecursive % Is it recursive?
% List of all defined macros in the form
-% \definedummyword\macro1\definedummyword\macro2...
+% \commondummyword\macro1\commondummyword\macro2...
% Currently is also contains all @aliases; the list can be split
% if there is a need.
\def\macrolist{}
% Add the macro to \macrolist
\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
\def\addtomacrolistxxx#1{%
- \toks0 = \expandafter{\macrolist\definedummyword#1}%
+ \toks0 = \expandafter{\macrolist\commondummyword#1}%
\xdef\macrolist{\the\toks0}%
}
% Remove the macro name from \macrolist:
\begingroup
\expandafter\let\csname#1\endcsname \relax
- \let\definedummyword\unmacrodo
+ \let\commondummyword\unmacrodo
\xdef\macrolist{\macrolist}%
\endgroup
\else
\ifx #1\relax
% remove this
\else
- \noexpand\definedummyword \noexpand#1%
+ \noexpand\commondummyword \noexpand#1%
\fi
}
% its parameters, looking like "\xeatspaces{\hash 1}".
% \paramno is the number of parameters
% \paramlist is a TeX parameter text, e.g. "#1,#2,#3,"
-% There are eight cases: recursive and nonrecursive macros of zero, one,
-% up to nine, and many arguments.
+% There are four cases: macros of zero, one, up to nine, and many arguments.
% \xdef is used so that macro definitions will survive the file
% they're defined in: @include reads the file inside a group.
%
\else
\let\xeatspaces\relax % suppress expansion
\fi
- \ifrecursive %%%%%%%%%%%%%% Recursive %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\macrobody}}%
- \or % 1
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\scanmacro{\macrobody}}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+ \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+ \egroup
+ \noexpand\scanmacro{\macrobody}%
+ }%
+ \else % at most 9
+ \ifnum\paramno<10\relax
+ % @MACNAME sets the context for reading the macro argument
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % comma.
+ % @MACNAME@@@ removes braces surrounding the argument list.
+ % @MACNAME@@@@ scans the macro body with arguments substituted.
\expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+ \bgroup
+ \noexpand\expandafter % This \expandafter skip any spaces after the
+ \noexpand\macroargctxt % macro before we change the catcode of space.
+ \noexpand\expandafter
+ \expandafter\noexpand\csname\the\macname @@\endcsname}%
+ \expandafter\xdef\csname\the\macname @@\endcsname##1{%
+ \noexpand\passargtomacro
+ \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
\expandafter\xdef\csname\the\macname @@@\endcsname##1{%
- \egroup
- \noexpand\scanmacro{\macrobody}%
- }%
- \else
- \ifnum\paramno<10\relax % at most 9
- % See non-recursive section below for comments
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
- \noexpand\expandafter
- \noexpand\macroargctxt
- \noexpand\expandafter
- \expandafter\noexpand\csname\the\macname @@\endcsname}%
- \expandafter\xdef\csname\the\macname @@\endcsname##1{%
- \noexpand\passargtomacro
- \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
- \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
- \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname @@@@\endcsname\paramlist{%
- \egroup\noexpand\scanmacro{\macrobody}}%
- \else % 10 or more
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\getargvals@{\the\macname}{\argl}%
- }%
- \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
- \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
- \fi
- \fi
- \else %%%%%%%%%%%%%%%%%%%%%% Non-recursive %%%%%%%%%%%%%%%%%%%%%%%%%%
- \ifcase\paramno
- % 0
+ \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname @@@@\endcsname\paramlist{%
+ \egroup\noexpand\scanmacro{\macrobody}}%
+ \else % 10 or more:
\expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\macrobody}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
- \noexpand\braceorline
- \expandafter\noexpand\csname\the\macname @@@\endcsname}%
- \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
- \egroup
- \noexpand\scanmacro{\macrobody}%
- }%
- \else % at most 9
- \ifnum\paramno<10\relax
- % @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
- % comma.
- % @MACNAME@@@ removes braces surrounding the argument list.
- % @MACNAME@@@@ scans the macro body with arguments substituted.
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup
- \noexpand\expandafter % This \expandafter skip any spaces after the
- \noexpand\macroargctxt % macro before we change the catcode of space.
- \noexpand\expandafter
- \expandafter\noexpand\csname\the\macname @@\endcsname}%
- \expandafter\xdef\csname\the\macname @@\endcsname##1{%
- \noexpand\passargtomacro
- \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
- \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
- \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname @@@@\endcsname\paramlist{%
- \egroup\noexpand\scanmacro{\macrobody}}%
- \else % 10 or more:
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\getargvals@{\the\macname}{\argl}%
- }%
- \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
- \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
- \fi
+ \noexpand\getargvals@{\the\macname}{\argl}%
+ }%
+ \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
+ \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
\fi
\fi}
% In this case, the replaced destination names of
% remote PDF cannot be known. In order to avoid replacement,
% you can use commandline option `-C 0x0010' for xdvipdfmx.
+ % If you use XeTeX 0.99996+ (TeX Live 2016+),
+ % the commandline option is not neccesary
+ % because we can use `dvipdfmx:config' special.
\special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
<< /S /GoToR /F (\the\filename.pdf) /D (name\pdfxrefdest) >> >>}%
\else
\countUTFx = "80
\countUTFy = "C2
\def\UTFviiiTmp{%
- \gdef~{
+ \gdef~{%
\ifpassthroughchars $\fi}}%
\UTFviiiLoop
\fi
}
+% These macros are used here to construct the name of a control
+% sequence to be defined.
+\def\UTFviiiTwoOctetsName#1#2{%
+ \csname u8:#1\string #2\endcsname}%
+\def\UTFviiiThreeOctetsName#1#2#3{%
+ \csname u8:#1\string #2\string #3\endcsname}%
+\def\UTFviiiFourOctetsName#1#2#3#4{%
+ \csname u8:#1\string #2\string #3\string #4\endcsname}%
+
% For UTF-8 byte sequence (TeX, e-TeX and pdfTeX)
% Definition macro to replace the Unicode character
% Definition macro that is used by @U command
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
+
+ % Give \u8:... its definition. The sequence of seven \expandafter's
+ % expands after the \gdef three times, e.g.
%
- % Access definitions of characters given UTF-8 sequences
- \def\UTFviiiTwoOctets##1##2{%
- \csname u8:##1\string ##2\endcsname}%
- \def\UTFviiiThreeOctets##1##2##3{%
- \csname u8:##1\string ##2\string ##3\endcsname}%
- \def\UTFviiiFourOctets##1##2##3##4{%
- \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
- \expandafter\expandafter\expandafter\expandafter
- \expandafter\expandafter\expandafter
- \gdef\UTFviiiTmp{#2}%
+ % 1. \UTFviiTwoOctetsName B1 B2
+ % 2. \csname u8:B1 \string B2 \endcsname
+ % 3. \u8: B1 B2 (a single control sequence token)
+ %
+ \expandafter\expandafter
+ \expandafter\expandafter
+ \expandafter\expandafter
+ \expandafter\gdef \UTFviiiTmp{#2}%
%
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp
\endgroup}
%
- % Given the value in \countUTFz as a Unicode code point, set \UTFviiiTmp.
+ % Given the value in \countUTFz as a Unicode code point, set \UTFviiiTmp
+ % to the corresponding UTF-8 sequence.
\gdef\parseXMLCharref{%
\ifnum\countUTFz < "A0\relax
\errhelp = \EMsimple
\errmessage{Cannot define Unicode char value < 00A0}%
\else\ifnum\countUTFz < "800\relax
\parseUTFviiiA,%
- \parseUTFviiiB C\UTFviiiTwoOctets.,%
+ \parseUTFviiiB C\UTFviiiTwoOctetsName.,%
\else\ifnum\countUTFz < "10000\relax
\parseUTFviiiA;%
\parseUTFviiiA,%
- \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+ \parseUTFviiiB E\UTFviiiThreeOctetsName.{,;}%
\else
\parseUTFviiiA;%
\parseUTFviiiA,%
\parseUTFviiiA!%
- \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+ \parseUTFviiiB F\UTFviiiFourOctetsName.{!,;}%
\fi\fi\fi
}
+ % Extract a byte from the end of the UTF-8 representation of \countUTFx.
+ % It must be a non-initial byte in the sequence.
+ % Change \uccode of #1 for it to be used in \parseUTFviiiB as one
+ % of the bytes.
\gdef\parseUTFviiiA#1{%
\countUTFx = \countUTFz
\divide\countUTFz by 64
- \countUTFy = \countUTFz
+ \countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
+
+ % \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
+ % in order to get the last five bits.
\advance\countUTFx by -\countUTFz
+
+ % Convert this to the byte in the UTF-8 sequence.
\advance\countUTFx by 128
\uccode `#1\countUTFx
\countUTFz = \countUTFy}
- % Used to set \UTFviiiTmp to a UTF-8 byte sequence
+ % Used to put a UTF-8 byte sequence into \UTFviiiTmp
+ % #1 is the increment for \countUTFz to yield a the first byte of the UTF-8
+ % sequence.
+ % #2 is one of the \UTFviii*OctetsName macros.
+ % #3 is always a full stop (.)
+ % #4 is a template for the other bytes in the sequence. The values for these
+ % bytes is substituted in here with \uppercase using the \uccode's.
\gdef\parseUTFviiiB#1#2#3#4{%
\advance\countUTFz by "#10\relax
\uccode `#3\countUTFz
projects / lilypond.git / commitdiff