--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef __FACOM6684_H
+#define __FACOM6684_H
+
+// This file contains various key layouts for the Fujitsu FACOM 6684KC3 Supercomputer Terminal Keyboard
+
+
+// ----- Variables -----
+static uint8_t facom6684_ModifierMask[] = { 0x20, 0x2D, 0x2E, 0x30, 0x3E, 0x60 };
+
+static uint8_t facom6684_DefaultMap[] = {
+ 0, // 0x00
+ 0, // 0x01
+ 0, // 0x02
+ 0, // 0x03
+ 0, // 0x04
+ 0, // 0x05
+ 0, // 0x06
+ 0, // 0x07
+ 0, // 0x08
+ 0, // 0x09
+ 0, // 0x0A
+ 0, // 0x0B
+ 0, // 0x0C
+ 0, // 0x0D
+ 0, // 0x0E
+ 0, // 0x0F
+ 0, // 0x10
+ 0, // 0x11
+ 0, // 0x12
+ 0, // 0x13
+ 0, // 0x14
+ 0, // 0x15
+ 0, // 0x16
+ 0, // 0x17
+ 0, // 0x18
+ 0, // 0x19
+ 0, // 0x1A
+ 0, // 0x1B
+ 0, // 0x1C
+ 0, // 0x1D
+ 0, // 0x1E
+ 0, // 0x1F
+ KEY_LEFT_SHIFT, // 0x20
+ 0, // 0x21
+ KEY_Z, // 0x22
+ KEY_X, // 0x23
+ KEY_C, // 0x24
+ KEY_V, // 0x25
+ KEY_B, // 0x26
+ KEY_N, // 0x27
+ KEY_M, // 0x28
+ KEY_COMMA, // 0x29
+ KEY_PERIOD, // 0x2A
+ KEY_SLASH, // 0x2B
+ 0, // 0x2C
+ KEY_RIGHT_SHIFT, // 0x2D
+ KEY_LEFT_ALT, // 0x2E
+ KEY_SPACE, // 0x2F
+ KEY_LEFT_CTRL, // 0x30
+ KEY_A, // 0x31
+ KEY_S, // 0x32
+ KEY_D, // 0x33
+ KEY_F, // 0x34
+ KEY_G, // 0x35
+ KEY_H, // 0x36
+ KEY_J, // 0x37
+ KEY_K, // 0x38
+ KEY_L, // 0x39
+ KEY_SEMICOLON, // 0x3A
+ KEY_QUOTE, // 0x3B
+ 0, // 0x3C
+ KEY_ENTER, // 0x3D
+ KEY_RIGHT_GUI, // 0x3E
+ KEY_LEFT, // 0x3F (KEYPAD_1)
+ KEY_TAB, // 0x40
+ KEY_Q, // 0x41
+ KEY_W, // 0x42
+ KEY_E, // 0x43
+ KEY_R, // 0x44
+ KEY_T, // 0x45
+ KEY_Y, // 0x46
+ KEY_U, // 0x47
+ KEY_I, // 0x48
+ KEY_O, // 0x49
+ KEY_P, // 0x4A
+ KEY_LEFT_BRACE, // 0x4B
+ KEY_RIGHT_BRACE, // 0x4C
+ KEY_BACKSLASH, // 0x4D
+ KEY_DELETE, // 0x4E
+ KEYPAD_4, // 0x4F
+ KEY_ESC, // 0x50
+ KEY_1, // 0x51
+ KEY_2, // 0x52
+ KEY_3, // 0x53
+ KEY_4, // 0x54
+ KEY_5, // 0x55
+ KEY_6, // 0x56
+ KEY_7, // 0x57
+ KEY_8, // 0x58
+ KEY_9, // 0x59
+ KEY_0, // 0x5A
+ KEY_MINUS, // 0x5B
+ KEY_EQUAL, // 0x5C
+ KEY_TILDE, // 0x5D
+ KEY_BACKSPACE, // 0x5E
+ KEY_NUM_LOCK, // 0x5F
+ KEY_LEFT_GUI, // 0x60
+ KEY_HOME, // 0x61
+ KEY_END, // 0x62
+ KEY_INSERT, // 0x63
+ KEY_DELETE, // 0x64
+ KEY_F1, // 0x65
+ KEY_F2, // 0x66
+ KEY_F3, // 0x67
+ KEY_F4, // 0x68
+ KEY_F5, // 0x69
+ KEY_F6, // 0x6A
+ KEY_F7, // 0x6B
+ KEY_F8, // 0x6C
+ KEY_F9, // 0x6D
+ KEY_F10, // 0x6E
+ KEY_PRINTSCREEN, // 0x6F
+ KEY_PAGE_UP, // 0x70
+ KEY_PAGE_DOWN, // 0x71
+ KEY_F11, // 0x72
+ KEYPAD_7, // 0x73
+ KEYPAD_8, // 0x74
+ KEYPAD_9, // 0x75
+ KEY_UP, // 0x76 (KEYPAD_5)
+ KEYPAD_6, // 0x77
+ KEY_DOWN, // 0x78 (KEYPAD_2)
+ KEY_RIGHT, // 0x79 (KEYPAD_3)
+ KEYPAD_0, // 0x7A
+ KEYPAD_00, // 0x7B
+ KEYPAD_ENTER, // 0x7C
+ 0, // 0x7D
+ 0, // 0x7E
+ 0, // 0x7F
+};
+
+static uint8_t facom6684_ColemakMap[] = {
+ 0, // 0x00
+ 0, // 0x01
+ 0, // 0x02
+ 0, // 0x03
+ 0, // 0x04
+ 0, // 0x05
+ 0, // 0x06
+ 0, // 0x07
+ 0, // 0x08
+ 0, // 0x09
+ 0, // 0x0A
+ 0, // 0x0B
+ 0, // 0x0C
+ 0, // 0x0D
+ 0, // 0x0E
+ 0, // 0x0F
+ 0, // 0x10
+ 0, // 0x11
+ 0, // 0x12
+ 0, // 0x13
+ 0, // 0x14
+ 0, // 0x15
+ 0, // 0x16
+ 0, // 0x17
+ 0, // 0x18
+ 0, // 0x19
+ 0, // 0x1A
+ 0, // 0x1B
+ 0, // 0x1C
+ 0, // 0x1D
+ 0, // 0x1E
+ 0, // 0x1F
+ KEY_LEFT_SHIFT, // 0x20
+ 0, // 0x21
+ KEY_Z, // 0x22
+ KEY_X, // 0x23
+ KEY_C, // 0x24
+ KEY_V, // 0x25
+ KEY_B, // 0x26
+ KEY_K, // 0x27
+ KEY_M, // 0x28
+ KEY_COMMA, // 0x29
+ KEY_PERIOD, // 0x2A
+ KEY_SLASH, // 0x2B
+ 0, // 0x2C
+ KEY_RIGHT_SHIFT, // 0x2D
+ KEY_LEFT_ALT, // 0x2E
+ KEY_SPACE, // 0x2F
+ KEY_LEFT_CTRL, // 0x30
+ KEY_A, // 0x31
+ KEY_R, // 0x32
+ KEY_S, // 0x33
+ KEY_T, // 0x34
+ KEY_D, // 0x35
+ KEY_H, // 0x36
+ KEY_N, // 0x37
+ KEY_E, // 0x38
+ KEY_I, // 0x39
+ KEY_O, // 0x3A
+ KEY_QUOTE, // 0x3B
+ 0, // 0x3C
+ KEY_ENTER, // 0x3D
+ KEY_RIGHT_GUI, // 0x3E
+ KEY_LEFT, // 0x3F (KEYPAD_1)
+ KEY_TAB, // 0x40
+ KEY_Q, // 0x41
+ KEY_W, // 0x42
+ KEY_F, // 0x43
+ KEY_P, // 0x44
+ KEY_G, // 0x45
+ KEY_J, // 0x46
+ KEY_L, // 0x47
+ KEY_U, // 0x48
+ KEY_Y, // 0x49
+ KEY_SEMICOLON, // 0x4A
+ KEY_LEFT_BRACE, // 0x4B
+ KEY_RIGHT_BRACE, // 0x4C
+ KEY_BACKSLASH, // 0x4D
+ KEY_DELETE, // 0x4E
+ KEYPAD_4, // 0x4F
+ KEY_ESC, // 0x50
+ KEY_1, // 0x51
+ KEY_2, // 0x52
+ KEY_3, // 0x53
+ KEY_4, // 0x54
+ KEY_5, // 0x55
+ KEY_6, // 0x56
+ KEY_7, // 0x57
+ KEY_8, // 0x58
+ KEY_9, // 0x59
+ KEY_0, // 0x5A
+ KEY_MINUS, // 0x5B
+ KEY_EQUAL, // 0x5C
+ KEY_TILDE, // 0x5D
+ KEY_BACKSPACE, // 0x5E
+ KEY_NUM_LOCK, // 0x5F
+ KEY_LEFT_GUI, // 0x60
+ KEY_HOME, // 0x61
+ KEY_END, // 0x62
+ KEY_INSERT, // 0x63
+ KEY_DELETE, // 0x64
+ KEY_F1, // 0x65
+ KEY_F2, // 0x66
+ KEY_F3, // 0x67
+ KEY_F4, // 0x68
+ KEY_F5, // 0x69
+ KEY_F6, // 0x6A
+ KEY_F7, // 0x6B
+ KEY_F8, // 0x6C
+ KEY_F9, // 0x6D
+ KEY_F10, // 0x6E
+ KEY_PRINTSCREEN, // 0x6F
+ KEY_PAGE_UP, // 0x70
+ KEY_PAGE_DOWN, // 0x71
+ KEY_F11, // 0x72
+ KEYPAD_7, // 0x73
+ KEYPAD_8, // 0x74
+ KEYPAD_9, // 0x75
+ KEY_UP, // 0x76 (KEYPAD_5)
+ KEYPAD_6, // 0x77
+ KEY_DOWN, // 0x78 (KEYPAD_2)
+ KEY_RIGHT, // 0x79 (KEYPAD_3)
+ KEYPAD_0, // 0x7A
+ KEYPAD_00, // 0x7B
+ KEYPAD_ENTER, // 0x7C
+ 0, // 0x7D
+ 0, // 0x7E
+ 0, // 0x7F
+};
+
+
+
+#endif
+
#include "betkb.h"
#include "budkeypad.h"
#include "epsonqx10.h"
+#include "facom6684.h"
#include "heathzenith.h"
#include "hp150.h"
#include "ibmconvertible.h"
--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// ----- Includes -----
+
+// AVR Includes
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+
+// Project Includes
+#include <led.h>
+#include <print.h>
+
+// Local Includes
+#include "scan_loop.h"
+
+
+
+// ----- Defines -----
+
+// Pinout Defines
+#define HOLD_PORT PORTD
+#define HOLD_DDR DDRD
+#define HOLD_PIN 3
+
+
+// ----- Macros -----
+
+// Make sure we haven't overflowed the buffer
+#define bufferAdd(byte) \
+ if ( KeyIndex_BufferUsed < KEYBOARD_BUFFER ) \
+ KeyIndex_Buffer[KeyIndex_BufferUsed++] = byte
+
+
+
+// ----- Variables -----
+
+// Buffer used to inform the macro processing module which keys have been detected as pressed
+volatile uint8_t KeyIndex_Buffer[KEYBOARD_BUFFER];
+volatile uint8_t KeyIndex_BufferUsed;
+volatile uint8_t KeyIndex_Add_InputSignal; // Used to pass the (click/input value) to the keyboard for the clicker
+
+
+// Buffer Signals
+volatile uint8_t BufferReadyToClear;
+
+
+
+// ----- Function Declarations -----
+
+void processKeyValue( uint8_t keyValue );
+void removeKeyValue( uint8_t keyValue );
+
+
+
+// ----- Interrupt Functions -----
+
+// USART Receive Buffer Full Interrupt
+ISR(USART1_RX_vect)
+{
+ cli(); // Disable Interrupts
+
+ uint8_t keyValue = 0x00;
+ uint8_t keyState = 0x00;
+
+ // Read the scancode packet from the USART (1st to 8th bits)
+ keyValue = UDR1;
+
+ // Read the release/press bit (9th bit) XXX Unnecessary, and wrong it seems, parity bit? or something else?
+ keyState = UCSR1B & 0x02;
+
+ // High bit of keyValue, also represents press/release
+ keyState = keyValue & 0x80 ? 0x00 : 0x02;
+
+ // Debug
+ char tmpStr[6];
+ hexToStr( keyValue & 0x7F, tmpStr );
+
+ // Process the scancode
+ switch ( keyState )
+ {
+ case 0x00: // Released
+ dPrintStrs( tmpStr, "R " ); // Debug
+
+ // Remove key from press buffer
+ removeKeyValue( keyValue & 0x7F );
+ break;
+
+ case 0x02: // Pressed
+ dPrintStrs( tmpStr, "P " ); // Debug
+
+ // New key to process
+ processKeyValue( keyValue & 0x7F );
+ break;
+ }
+
+ sei(); // Re-enable Interrupts
+}
+
+
+
+// ----- Functions -----
+
+// Setup
+inline void scan_setup()
+{
+ // Setup the the USART interface for keyboard data input
+ // NOTE: The input data signal needs to be inverted for the Teensy USART to properly work
+
+ // Setup baud rate
+ // 16 MHz / ( 16 * Baud ) = UBRR
+ // Baud <- 0.823284 ms per bit, thus 1000 / 0.823284 = 1214.65004 -> 823.2824
+ // Thus baud setting = 823
+ uint16_t baud = 823; // Max setting of 4095
+ UBRR1H = (uint8_t)(baud >> 8);
+ UBRR1L = (uint8_t)baud;
+
+ // Enable the receiver, and RX Complete Interrupt as well as 9 bit data
+ UCSR1B = 0x94;
+
+ // The transmitter is only to be enabled when needed
+ // Set the pin to be pull-up otherwise (use the lowered voltage inverter in order to sink)
+ HOLD_DDR &= ~(1 << HOLD_PIN);
+ HOLD_PORT |= (1 << HOLD_PIN);
+
+ // Set frame format: 9 data, 1 stop bit, no parity
+ // Asynchrounous USART mode
+ UCSR1C = 0x06;
+
+ // Initially buffer doesn't need to be cleared (it's empty...)
+ BufferReadyToClear = 0;
+
+ // InputSignal is off by default
+ KeyIndex_Add_InputSignal = 0x00;
+
+ // Reset the keyboard before scanning, we might be in a wierd state
+ scan_resetKeyboard();
+}
+
+
+// Main Detection Loop
+// Not needed for the BETKB, this is just a busy loop
+inline uint8_t scan_loop()
+{
+ return 0;
+}
+
+void processKeyValue( uint8_t keyValue )
+{
+ // Interpret scan code
+ switch ( keyValue )
+ {
+ case 0x00: // Break code from input?
+ break;
+ default:
+ // Make sure the key isn't already in the buffer
+ for ( uint8_t c = 0; c < KeyIndex_BufferUsed + 1; c++ )
+ {
+ // Key isn't in the buffer yet
+ if ( c == KeyIndex_BufferUsed )
+ {
+ bufferAdd( keyValue );
+
+ // Only send data if enabled
+ if ( KeyIndex_Add_InputSignal )
+ scan_sendData( KeyIndex_Add_InputSignal );
+ break;
+ }
+
+ // Key already in the buffer
+ if ( KeyIndex_Buffer[c] == keyValue )
+ break;
+ }
+ break;
+ }
+}
+
+void removeKeyValue( uint8_t keyValue )
+{
+ // Check for the released key, and shift the other keys lower on the buffer
+ uint8_t c;
+ for ( c = 0; c < KeyIndex_BufferUsed; c++ )
+ {
+ // Key to release found
+ if ( KeyIndex_Buffer[c] == keyValue )
+ {
+ // Shift keys from c position
+ for ( uint8_t k = c; k < KeyIndex_BufferUsed - 1; k++ )
+ KeyIndex_Buffer[k] = KeyIndex_Buffer[k + 1];
+
+ // Decrement Buffer
+ KeyIndex_BufferUsed--;
+
+ break;
+ }
+ }
+
+ // Error case (no key to release)
+ if ( c == KeyIndex_BufferUsed + 1 )
+ {
+ errorLED( 1 );
+ char tmpStr[6];
+ hexToStr( keyValue, tmpStr );
+ erro_dPrint( "Could not find key to release: ", tmpStr );
+ }
+}
+
+// Send data
+uint8_t scan_sendData( uint8_t dataPayload )
+{
+ // Enable the USART Transmitter
+ UCSR1B |= (1 << 3);
+
+ // Debug
+ char tmpStr[6];
+ hexToStr( dataPayload, tmpStr );
+ info_dPrint( "Sending - ", tmpStr );
+
+ UDR1 = dataPayload;
+
+ // Wait for the payload
+ _delay_us( 800 );
+
+ // Disable the USART Transmitter
+ UCSR1B &= ~(1 << 3);
+
+ return 0;
+}
+
+// Signal KeyIndex_Buffer that it has been properly read
+void scan_finishedWithBuffer( void )
+{
+}
+
+// Signal that the keys have been properly sent over USB
+void scan_finishedWithUSBBuffer( void )
+{
+}
+
+// Reset/Hold keyboard
+// NOTE: Does nothing with the BETKB
+void scan_lockKeyboard( void )
+{
+}
+
+// NOTE: Does nothing with the BETKB
+void scan_unlockKeyboard( void )
+{
+}
+
+// Reset Keyboard
+void scan_resetKeyboard( void )
+{
+ // Not a calculated valued...
+ _delay_ms( 50 );
+}
+
--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef __SCAN_LOOP_H
+#define __SCAN_LOOP_H
+
+// ----- Includes -----
+
+// Compiler Includes
+#include <stdint.h>
+
+// Local Includes
+
+
+
+// ----- Defines -----
+
+#define KEYBOARD_SIZE 0x7F // 127 - Size of the array space for the keyboard(max index)
+#define KEYBOARD_BUFFER 24 // Max number of key signals to buffer
+
+
+
+// ----- Variables -----
+
+extern volatile uint8_t KeyIndex_Buffer[KEYBOARD_BUFFER];
+extern volatile uint8_t KeyIndex_BufferUsed;
+extern volatile uint8_t KeyIndex_Add_InputSignal;
+
+
+
+// ----- Functions -----
+
+// Functions used by main.c
+void scan_setup( void );
+uint8_t scan_loop( void );
+
+
+// Functions available to macro.c
+uint8_t scan_sendData( uint8_t dataPayload );
+
+void scan_finishedWithBuffer( void );
+void scan_finishedWithUSBBuffer( void );
+void scan_lockKeyboard( void );
+void scan_unlockKeyboard( void );
+void scan_resetKeyboard( void );
+
+
+#endif // __SCAN_LOOP_H
+
--- /dev/null
+###| CMake Kiibohd Controller Scan Module |###
+#
+# Written by Jacob Alexander in 2013 for the Kiibohd Controller
+#
+# Released into the Public Domain
+#
+# For the Fujitsu FACOM 6684KC3 Supercomputer Terminal Keyboard (M-780, M-1800, etc.)
+#
+###
+
+
+###
+# Module C files
+#
+
+set( SCAN_SRCS
+ scan_loop.c
+)
+
+
+###
+# Module H files
+#
+set( SCAN_HDRS
+ scan_loop.h
+)
+
+
+###
+# File Dependency Setup
+#
+ADD_FILE_DEPENDENCIES( scan_loop.c ${SCAN_HDRS} )
+#add_file_dependencies( scan_loop.c ${SCAN_HDRS} )
+#add_file_dependencies( macro.c keymap.h facom6684.h )
+
+
+###
+# Module Specific Options
+#
+add_definitions( -I${HEAD_DIR}/Keymap )
+
+#| Keymap Settings
+add_definitions(
+ -DMODIFIER_MASK=facom6684_ModifierMask
+ -DKEYINDEX_MASK=facom6684_ColemakMap
+ #-DKEYINDEX_MASK=facom6684_DefaultMap
+)
+
--- /dev/null
+#!/bin/bash
+###| Builder Script |###
+#
+# Builds all permutations of modules
+# This script is an attempt to maintain module sanity as new ones are added
+#
+# Fortunately, sweeping API changes don't happen much anymore...but just in case...
+#
+# Written by Jacob Alexander 2013 for the Kiibohd Controller
+# Released into the Public Domain
+#
+###
+
+## TODO List ##
+# - Complete non-Scan module permutations (will take extra work)
+# - Add command line arguments
+# - Add help flag for usage
+# - Make sure the script is being run from the correct directory
+
+
+main() {
+ ERROR="\e[5;1;31mERROR\e[0m:"
+ failCount=0
+
+ # Scan for list of Scan Modules
+ scanModules=$(ls Scan)
+
+ # Prune out "invalid" modules (parent modules)
+ scanModules=${scanModules[@]//matrix/}
+
+ # Create permutation directories
+ # Then run cmake, and run each build permutation
+ # Keeping track of how many builds failed/passed
+ for module in $scanModules; do
+ # Create directory, but do not error if it exists already
+ mkdir -p build/$module
+ cd build/$module
+
+ # Make sure CMake has been run, and attempt to build
+ cmake -DScanModuleOverride=$module ../.. && make || let failCount++
+
+ # Cleanup, for the next build
+ cd -
+ done
+
+ totalModules=$(echo $scanModules | wc -w)
+ if (( failCount > 0 )); then
+ echo -e "$ERROR $failCount/$totalModules failed"
+ else
+ echo -e "Build Success!"
+ fi
+}
+
+
+#| Main Script Entry
+main "$@"
+
+
+exit 0
+
###| CMAKE Kiibohd Controller Source Configurator |###
#
-# Written by Jacob Alexander in 2011-2012 for the Kiibohd Controller
+# Written by Jacob Alexander in 2011-2013 for the Kiibohd Controller
#
# Released into the Public Domain
#
#| Please the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
##| Deals with acquiring the keypress information and turning it into a key index
-set( ScanModule "HP150" )
+set( ScanModule "FACOM6684" )
##| Uses the key index and potentially applies special conditions to it, mapping it to a usb key code
set( MacroModule "buffer" )
+###
+# Module Overrides (Used in the buildall.bash script)
+#
+if ( EXISTS ${PROJECT_SOURCE_DIR}/Scan/${ScanModuleOverride} )
+ set( ScanModule ${ScanModuleOverride} )
+endif ( EXISTS ${PROJECT_SOURCE_DIR}/Scan/${ScanModuleOverride} )
+
+
+
###
# Path Setup
#