/* Teensyduino Core Library
* http://www.pjrc.com/teensy/
* Copyright (c) 2013 PJRC.COM, LLC.
- * Modifications by Jacob Alexander 2013-2014
+ * Modifications by Jacob Alexander 2013-2015
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
{
// Send boot keyboard interrupt packet(s)
case 0:
+ // USB Boot Mode debug output
+ if ( Output_DebugMode )
+ {
+ dbug_msg("Boot USB: ");
+ printHex_op( USBKeys_Modifiers, 2 );
+ print(" ");
+ printHex( 0 );
+ print(" ");
+ printHex_op( USBKeys_Keys[0], 2 );
+ printHex_op( USBKeys_Keys[1], 2 );
+ printHex_op( USBKeys_Keys[2], 2 );
+ printHex_op( USBKeys_Keys[3], 2 );
+ printHex_op( USBKeys_Keys[4], 2 );
+ printHex_op( USBKeys_Keys[5], 2 );
+ print( NL );
+ }
+
// Boot Mode
*tx_buf++ = USBKeys_Modifiers;
*tx_buf++ = 0;
// Send NKRO keyboard interrupts packet(s)
case 1:
+ if ( Output_DebugMode )
+ {
+ dbug_msg("NKRO USB: ");
+ }
+
// Check system control keys
if ( USBKeys_Changed & USBKeyChangeState_System )
{
+ if ( Output_DebugMode )
+ {
+ print("SysCtrl[");
+ printHex_op( USBKeys_SysCtrl, 2 );
+ print("] ");
+ }
+
*tx_buf++ = 0x02; // ID
*tx_buf = USBKeys_SysCtrl;
tx_packet->len = 2;
// Check consumer control keys
if ( USBKeys_Changed & USBKeyChangeState_Consumer )
{
+ if ( Output_DebugMode )
+ {
+ print("ConsCtrl[");
+ printHex_op( USBKeys_ConsCtrl, 2 );
+ print("] ");
+ }
+
*tx_buf++ = 0x03; // ID
*tx_buf++ = (uint8_t)(USBKeys_ConsCtrl & 0x00FF);
*tx_buf = (uint8_t)(USBKeys_ConsCtrl >> 8);
// Standard HID Keyboard
if ( USBKeys_Changed )
{
+ // USB NKRO Debug output
+ if ( Output_DebugMode )
+ {
+ printHex_op( USBKeys_Modifiers, 2 );
+ print(" ");
+ for ( uint8_t c = 0; c < 6; c++ )
+ printHex_op( USBKeys_Keys[ c ], 2 );
+ print(" ");
+ for ( uint8_t c = 6; c < 20; c++ )
+ printHex_op( USBKeys_Keys[ c ], 2 );
+ print(" ");
+ printHex_op( USBKeys_Keys[20], 2 );
+ print(" ");
+ for ( uint8_t c = 21; c < 27; c++ )
+ printHex_op( USBKeys_Keys[ c ], 2 );
+ print( NL );
+ }
+
tx_packet->len = 0;
// Modifiers
// ----- Function Declarations -----
void cliFunc_kbdProtocol( char* args );
+void cliFunc_outputDebug( char* args );
void cliFunc_readLEDs ( char* args );
void cliFunc_sendKeys ( char* args );
void cliFunc_setKeys ( char* args );
// Output Module command dictionary
CLIDict_Entry( kbdProtocol, "Keyboard Protocol Mode: 0 - Boot, 1 - OS/NKRO Mode" );
+CLIDict_Entry( outputDebug, "Toggle Output Debug mode." );
CLIDict_Entry( readLEDs, "Read LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 ScrlLck, 16 Kana, etc." );
CLIDict_Entry( sendKeys, "Send the prepared list of USB codes and modifier byte." );
CLIDict_Entry( setKeys, "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m." );
CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
CLIDict_Item( kbdProtocol ),
+ CLIDict_Item( outputDebug ),
CLIDict_Item( readLEDs ),
CLIDict_Item( sendKeys ),
CLIDict_Item( setKeys ),
// 0 is often used to show that a USB cable is not plugged in (but has power)
uint8_t Output_Available = 0;
+// Debug control variable for Output modules
+// 0 - Debug disabled (default)
+// 1 - Debug enabled
+ uint8_t Output_DebugMode = 0;
+
// ----- Capabilities -----
}
+void cliFunc_outputDebug( char* args )
+{
+ // Parse number from argument
+ // NOTE: Only first argument is used
+ char* arg1Ptr;
+ char* arg2Ptr;
+ CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
+
+ // Default to 1 if no argument is given
+ Output_DebugMode = 1;
+
+ if ( arg1Ptr[0] != '\0' )
+ {
+ Output_DebugMode = (uint16_t)numToInt( arg1Ptr );
+ }
+}
+
+
void cliFunc_readLEDs( char* args )
{
print( NL );