--- /dev/null
+/* Copyright (C) 2011 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// ----- Includes -----
+
+// AVR Includes
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+// Project Includes
+#include <led.h>
+#include <print.h>
+
+// Local Includes
+#include "scan_loop.h"
+
+
+
+// ----- Defines -----
+
+
+
+// ----- Macros -----
+
+
+
+// ----- Variables -----
+
+uint8_t KeyIndex_Array[KEYBOARD_SIZE + 1];
+
+
+// Known signals
+static uint8_t cmd_clickOFF = 0x0A; // Short beep, turns off clicker
+static uint8_t cmd_clickON = 0x04; // Long beep, turns on clicker
+static uint8_t cmd_ACK_AA = 0x10; // Keyboard will send ack (0xAA) back to PC
+
+// Other known signals
+// 0x02 turns on clicker but with short beep
+
+
+
+// ----- Functions -----
+
+// Setup
+inline void scan_setup()
+{
+ // Setup the the USART interface for keyboard data input
+
+ // Setup baud rate
+ // 16 MHz / ( 16 * Baud ) = UBRR
+ // Baud <- 3.358 ms per bit, thus 1000 / 3.358 = 297.80
+ // Thus baud = 3357
+ uint16_t baud = 3357; // Max setting of 4095
+ UBRR1H = (uint8_t)(baud >> 8);
+ UBRR1L = (uint8_t)baud;
+
+ // Enable the receiver, transitter, and RX Complete Interrupt
+ UCSR1B = 0x98;
+
+ // Set frame format: 8 data, no stop bits or parity
+ // Asynchrounous USART mode
+ // Kaypro sends ASCII codes (mostly standard) with 1 start bit and 8 data bits, with no trailing stop or parity bits
+ UCSR1C = 0x06;
+}
+
+
+// Main Detection Loop
+inline uint8_t scan_loop()
+{
+ /*
+ // Packet Read
+ if ( packet_index == 8 )
+ {
+ // Disable Error LED, proper key found
+ errorLED( 0 );
+
+//#ifdef MAX_DEBUG
+ // Crazy Debug (Read the Scan Code)
+ char tmpStr[3];
+ hexToStr_op( inputData, tmpStr, 2 );
+ dPrintStrsNL( "Read Data: 0x", tmpStr );
+//#endif
+ // - Map the scan code to the index array -
+ // If the 8th bit is high, remove the keypress, else, add the keypress
+ // The lower 7 bits are the array index
+ KeyIndex_Array[(inputData & 0x7F)] = (inputData & 0x80) ? 0x00 : 0x80;
+
+ // Reset Containers
+ packet_index = 0;
+ inputData = 0xFF;
+ }
+ // Bad Packet
+ else if ( packet_index > 8 )
+ {
+ // Signal Error
+ errorLED( 1 );
+
+ char tmpStr[3];
+ int8ToStr( packet_index, tmpStr );
+ erro_dPrint( "Big packet? Mismatched... ", tmpStr );
+
+ packet_index = 0;
+ inputData = 0xFF;
+ }
+ */
+ /*
+ // Disable keyboard interrupt (does nothing if already off)
+ UNSET_INTR();
+
+ // Read the clock 8 times
+ if ( READ_CLK )
+ {
+ // Mis-read packet, set back to 0
+ if ( packet_index == -1 )
+ packet_index = 0;
+
+ // Append 1 bit of data
+ inputData &= ~(READ_DATA << packet_index);
+ packet_index++;
+
+ // 8 Bits have been read
+ if ( packet_index == 8 )
+ {
+ // Wait till clock edge falls
+ while ( READ_CLK );
+
+ // Sample both lines to make sure this is not a data value
+ // and definitely the end of packet data blip
+ uint16_t badDataCounter = 0;
+ while ( !( READ_DATA ) && !( READ_CLK ) )
+ badDataCounter++;
+
+ if ( badDataCounter < 25 )
+ {
+//#ifdef MAX_DEBUG
+ // Crazy Debug (Read the Scan Code)
+ char tmpStr[3];
+ hexToStr_op( inputData, tmpStr, 2 );
+ dbug_dPrint( "Read Data: 0x", tmpStr );
+//#endif
+ // - Map the scan code to the index array -
+ // If the 8th bit is high, remove the keypress, else, add the keypress
+ // The lower 7 bits are the array index
+ KeyIndex_Array[(inputData & 0x7F)] = (inputData & 0x80) ? 0x00 : 0x80;
+ }
+ // Even though this is a mis-read packet, we still know what the value is
+ else
+ {
+ // Signal Error
+ errorLED( 1 );
+ char tmpStr[3];
+ hexToStr_op( inputData, tmpStr, 2 );
+ erro_dPrint( "Bad packet? Mismatched... 0x", tmpStr );
+ }
+
+ // Reset Containers
+ inputData = 0xFF;
+ packet_index = 0;
+
+ // Interrupt the keyboard, so we don't get packet pieces...
+ SET_INTR();
+
+ // Do not wait for next clock, let USB do it's thing (if desired)
+ return packet_index;
+ }
+
+ // Wait till clock edge falls
+ while ( READ_CLK );
+ }
+
+ // Interrupt keyboard if there is no pending packet
+ SET_INTR();
+ */
+ return 0;
+}
+
+// USART Receive Buffer Full Interrupt
+ISR(USART1_RX_vect)
+{
+ cli(); // Disable Interrupts
+
+ uint8_t keyValue = UDR1;
+ char tmpStr1[6];
+ hexToStr( keyValue, tmpStr1 );
+ dPrintStrs( tmpStr1, " " );
+
+ // Special keys - For communication to the keyboard
+ // TODO Try to push this functionality into the macros...somehow
+ switch ( keyValue )
+ {
+ case 0xC3: // Keypad Enter
+ print("\n");
+ info_print("BEEEEP! - Clicker on");
+ UDR1 = cmd_clickON;
+ break;
+
+ case 0xB2: // Keypad Decimal
+ print("\n");
+ info_print("BEEP! - Clicker off");
+ UDR1 = cmd_clickOFF;
+ break;
+
+ case 0x0A: // Line Feed
+ print("\n");
+ info_print("ACK!!");
+ UDR1 = cmd_ACK_AA;
+ break;
+ }
+
+ // Add key to processing buffer
+
+ sei(); // Re-enable Interrupts
+}
+
--- /dev/null
+/* Copyright (C) 2011 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef __SCAN_LOOP_H
+#define __SCAN_LOOP_H
+
+// ----- Includes -----
+
+// Compiler Includes
+#include <stdint.h>
+
+// Local Includes
+
+
+
+// ----- Defines -----
+
+#define KEYBOARD_SIZE 0x4c // 76 - Size of the array space for the keyboardr(max index)
+
+
+
+// ----- Variables -----
+
+// NOTE: Highest Bit: Valid keypress (0x80 is valid keypress)
+// Other Bits: Pressed state sample counter
+extern uint8_t KeyIndex_Array [KEYBOARD_SIZE + 1];
+ static const uint8_t KeyIndex_Size = KEYBOARD_SIZE;
+
+
+
+// ----- Functions -----
+
+void scan_setup( void );
+uint8_t scan_loop( void );
+
+#endif // __SCAN_LOOP_H
+
projects / kiibohd-controller.git / commitdiff