-/* Copyright (C) 2011 by Jacob Alexander
+/* Copyright (C) 2011-2013 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
// AVR Includes
#include <avr/pgmspace.h>
-// Project Includes
-#include "usb_keyboard_debug.h"
+// USB Includes
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+#include "avr/usb_keyboard_debug.h"
+#elif defined(_mk20dx128_)
+#include "arm/usb_keyboard.h"
+#endif
--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+// This include file decides which set of compiler family include files to use on typical Macro modules.
+// Additional includes should only be added to this file if they should be added to *all* Macro modules.
+
+
+// ----- Includes -----
+
+#ifndef __MACROLIB_H
+#define __MACROLIB_H
+
+// ARM
+#if defined(_mk20dx128_)
+
+#include <Lib/mk20dx128.h>
+#include <Lib/aliased_bitband.h>
+#include <Lib/delay.h>
+
+#endif
+
+
+
+// AVR
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
+#include <avr/interrupt.h>
+#include <util/delay.h>
+
+#endif
+
+
+#endif
+
--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+// This include file decides which set of compiler family include files to use on typical Scan modules.
+// Additional includes should only be added to this file if they should be added to *all* Scan modules.
+
+
+// ----- Includes -----
+
+#ifndef __MACROLIB_H
+#define __MACROLIB_H
+
+// ARM
+#if defined(_mk20dx128_)
+
+#include <Lib/mk20dx128.h>
+#include <Lib/aliased_bitband.h>
+
+#endif
+
+
+
+// AVR
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+
+#endif
+
+
+#endif
+
--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+// This include file decides which set of compiler family include files to use on typical Scan modules.
+// Additional includes should only be added to this file if they should be added to *all* Scan modules.
+
+
+// ----- Includes -----
+
+#ifndef __SCANLIB_H
+#define __SCANLIB_H
+
+// ARM
+#if defined(_mk20dx128_)
+
+#include <Lib/mk20dx128.h>
+#include <Lib/aliased_bitband.h>
+#include <Lib/delay.h>
+
+#endif
+
+
+
+// AVR
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+
+#endif
+
+
+#endif
+
--- /dev/null
+/* Copyright (C) 2013 by Jacob Alexander
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+
+// This include file decides which set of compiler family include files to use on typical Scan modules.
+// Additional includes should only be added to this file if they should be added to *all* Scan modules.
+
+
+// ----- Includes -----
+
+#ifndef __MACROLIB_H
+#define __MACROLIB_H
+
+// ARM
+#if defined(_mk20dx128_)
+
+#include <Lib/mk20dx128.h>
+#include <Lib/delay.h>
+
+#endif
+
+
+
+// AVR
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
+#include <util/delay.h>
+
+#endif
+
+
+#endif
+
// ----- Includes -----
-// AVR Includes
-#include <util/delay.h>
-#include <avr/interrupt.h>
+// Compiler Includes
+#include <Lib/MacroLib.h>
// Project Includes
#include <led.h>
-/* Copyright (C) 2011 by Jacob Alexander
+/* Copyright (C) 2011-2013 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
// ----- Includes -----
-// AVR Includes
-#include <util/delay.h>
-#include <avr/interrupt.h>
+// Compiler Includes
+#include <Lib/MacroLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
// ----- Includes -----
-// AVR Includes
-#include <avr/interrupt.h>
+// Compiler Includes
+#include <Lib/ScanLib.h>
// Project Includes
#include <led.h>
--- /dev/null
+/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
+ * http://www.pjrc.com/teensy/usb_keyboard.html
+ * Copyright (c) 2009 PJRC.COM, LLC
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Version 1.0: Initial Release
+// Version 1.1: Add support for Teensy 2.0
+
+#define USB_SERIAL_PRIVATE_INCLUDE
+#include "usb_keyboard_debug.h"
+
+/**************************************************************************
+ *
+ * Configurable Options
+ *
+ **************************************************************************/
+
+// USB devices are supposed to implment a halt feature, which is
+// rarely (if ever) used. If you comment this line out, the halt
+// code will be removed, saving 102 bytes of space (gcc 4.3.0).
+// This is not strictly USB compliant, but works with all major
+// operating systems.
+#define SUPPORT_ENDPOINT_HALT
+
+
+
+/**************************************************************************
+ *
+ * Endpoint Buffer Configuration
+ *
+ **************************************************************************/
+
+#define ENDPOINT0_SIZE 32
+
+#define KEYBOARD_INTERFACE 0
+#define KEYBOARD_ENDPOINT 3
+#define KEYBOARD_SIZE 8
+#define KEYBOARD_BUFFER EP_DOUBLE_BUFFER
+
+#define DEBUG_INTERFACE 1
+#define DEBUG_TX_ENDPOINT 4
+#define DEBUG_TX_SIZE 32
+#define DEBUG_TX_BUFFER EP_DOUBLE_BUFFER
+
+static const uint8_t PROGMEM endpoint_config_table[] = {
+ 0,
+ 0,
+ 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER,
+ 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER
+};
+
+
+/**************************************************************************
+ *
+ * Descriptor Data
+ *
+ **************************************************************************/
+
+// Descriptors are the data that your computer reads when it auto-detects
+// this USB device (called "enumeration" in USB lingo). The most commonly
+// changed items are editable at the top of this file. Changing things
+// in here should only be done by those who've read chapter 9 of the USB
+// spec and relevant portions of any USB class specifications!
+
+
+static const uint8_t PROGMEM device_descriptor[] = {
+ 18, // bLength
+ 1, // bDescriptorType
+ 0x00, 0x02, // bcdUSB
+ 0, // bDeviceClass
+ 0, // bDeviceSubClass
+ 0, // bDeviceProtocol
+ ENDPOINT0_SIZE, // bMaxPacketSize0
+ LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
+ LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
+ 0x00, 0x01, // bcdDevice
+ 1, // iManufacturer
+ 2, // iProduct
+ 0, // iSerialNumber
+ 1 // bNumConfigurations
+};
+
+// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
+static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
+ 0x05, 0x01, // Usage Page (Generic Desktop),
+ 0x09, 0x06, // Usage (Keyboard),
+ 0xA1, 0x01, // Collection (Application),
+ 0x75, 0x01, // Report Size (1),
+ 0x95, 0x08, // Report Count (8),
+ 0x05, 0x07, // Usage Page (Key Codes),
+ 0x19, 0xE0, // Usage Minimum (224),
+ 0x29, 0xE7, // Usage Maximum (231),
+ 0x15, 0x00, // Logical Minimum (0),
+ 0x25, 0x01, // Logical Maximum (1),
+ 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
+ 0x95, 0x01, // Report Count (1),
+ 0x75, 0x08, // Report Size (8),
+ 0x81, 0x03, // Input (Constant), ;Reserved byte
+ 0x95, 0x05, // Report Count (5),
+ 0x75, 0x01, // Report Size (1),
+ 0x05, 0x08, // Usage Page (LEDs),
+ 0x19, 0x01, // Usage Minimum (1),
+ 0x29, 0x05, // Usage Maximum (5),
+ 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report
+ 0x95, 0x01, // Report Count (1),
+ 0x75, 0x03, // Report Size (3),
+ 0x91, 0x03, // Output (Constant), ;LED report padding
+ 0x95, 0x06, // Report Count (6),
+ 0x75, 0x08, // Report Size (8),
+ 0x15, 0x00, // Logical Minimum (0),
+ 0x25, 0x68, // Logical Maximum(104),
+ 0x05, 0x07, // Usage Page (Key Codes),
+ 0x19, 0x00, // Usage Minimum (0),
+ 0x29, 0x68, // Usage Maximum (104),
+ 0x81, 0x00, // Input (Data, Array),
+ 0xc0 // End Collection
+};
+
+static const uint8_t PROGMEM debug_hid_report_desc[] = {
+ //0x06, 0x30, 0xFF, // Usage Page 0xFF31 (vendor defined)
+ 0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined)
+ 0x09, 0x74, // Usage 0x74
+ 0xA1, 0x53, // Collection 0x53
+ 0x75, 0x08, // report size = 8 bits
+ 0x15, 0x00, // logical minimum = 0
+ 0x26, 0xFF, 0x00, // logical maximum = 255
+ 0x95, DEBUG_TX_SIZE, // report count
+ 0x09, 0x75, // usage
+ 0x81, 0x02, // Input (array)
+ 0xC0 // end collection
+};
+
+#define CONFIG1_DESC_SIZE (9+9+9+7+9+9+7)
+#define KEYBOARD_HID_DESC_OFFSET (9+9)
+#define DEBUG_HID_DESC_OFFSET (9+9+9+7+9)
+static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
+ // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
+ 9, // bLength;
+ 2, // bDescriptorType;
+ LSB(CONFIG1_DESC_SIZE), // wTotalLength
+ MSB(CONFIG1_DESC_SIZE),
+ 2, // bNumInterfaces
+ 1, // bConfigurationValue
+ 0, // iConfiguration
+ 0xC0, // bmAttributes
+ 50, // bMaxPower
+ // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+ 9, // bLength
+ 4, // bDescriptorType
+ KEYBOARD_INTERFACE, // bInterfaceNumber
+ 0, // bAlternateSetting
+ 1, // bNumEndpoints
+ 0x03, // bInterfaceClass (0x03 = HID)
+ 0x01, // bInterfaceSubClass (0x01 = Boot)
+ 0x01, // bInterfaceProtocol (0x01 = Keyboard)
+ 0, // iInterface
+ // HID interface descriptor, HID 1.11 spec, section 6.2.1
+ 9, // bLength
+ 0x21, // bDescriptorType
+ 0x11, 0x01, // bcdHID
+ 0, // bCountryCode
+ 1, // bNumDescriptors
+ 0x22, // bDescriptorType
+ sizeof(keyboard_hid_report_desc), // wDescriptorLength
+ 0,
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ 7, // bLength
+ 5, // bDescriptorType
+ KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
+ 0x03, // bmAttributes (0x03=intr)
+ KEYBOARD_SIZE, 0, // wMaxPacketSize
+ 1, // bInterval
+ // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
+ 9, // bLength
+ 4, // bDescriptorType
+ DEBUG_INTERFACE, // bInterfaceNumber
+ 0, // bAlternateSetting
+ 1, // bNumEndpoints
+ 0x03, // bInterfaceClass (0x03 = HID)
+ 0x00, // bInterfaceSubClass
+ 0x00, // bInterfaceProtocol
+ 0, // iInterface
+ // HID interface descriptor, HID 1.11 spec, section 6.2.1
+ 9, // bLength
+ 0x21, // bDescriptorType
+ 0x11, 0x01, // bcdHID
+ 0, // bCountryCode
+ 1, // bNumDescriptors
+ 0x22, // bDescriptorType
+ sizeof(debug_hid_report_desc), // wDescriptorLength
+ 0,
+ // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
+ 7, // bLength
+ 5, // bDescriptorType
+ DEBUG_TX_ENDPOINT | 0x80, // bEndpointAddress
+ 0x03, // bmAttributes (0x03=intr)
+ DEBUG_TX_SIZE, 0, // wMaxPacketSize
+ 1 // bInterval
+};
+
+// If you're desperate for a little extra code memory, these strings
+// can be completely removed if iManufacturer, iProduct, iSerialNumber
+// in the device desciptor are changed to zeros.
+struct usb_string_descriptor_struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ int16_t wString[];
+};
+static const struct usb_string_descriptor_struct PROGMEM string0 = {
+ 4,
+ 3,
+ {0x0409}
+};
+static const struct usb_string_descriptor_struct PROGMEM string1 = {
+ sizeof(STR_MANUFACTURER),
+ 3,
+ STR_MANUFACTURER
+};
+static const struct usb_string_descriptor_struct PROGMEM string2 = {
+ sizeof(STR_PRODUCT),
+ 3,
+ STR_PRODUCT
+};
+
+// This table defines which descriptor data is sent for each specific
+// request from the host (in wValue and wIndex).
+static const struct descriptor_list_struct {
+ uint16_t wValue;
+ uint16_t wIndex;
+ const uint8_t *addr;
+ uint8_t length;
+} PROGMEM descriptor_list[] = {
+ {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
+ {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
+ {0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
+ {0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9},
+ {0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)},
+ {0x2100, DEBUG_INTERFACE, config1_descriptor+DEBUG_HID_DESC_OFFSET, 9},
+ {0x0300, 0x0000, (const uint8_t *)&string0, 4},
+ {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
+ {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)}
+};
+#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
+
+
+/**************************************************************************
+ *
+ * Variables - these are the only non-stack RAM usage
+ *
+ **************************************************************************/
+
+// zero when we are not configured, non-zero when enumerated
+static volatile uint8_t usb_configuration=0;
+
+// the time remaining before we transmit any partially full
+// packet, or send a zero length packet.
+static volatile uint8_t debug_flush_timer=0;
+
+// protocol setting from the host. We use exactly the same report
+// either way, so this variable only stores the setting since we
+// are required to be able to report which setting is in use.
+static uint8_t keyboard_protocol=1;
+
+// the idle configuration, how often we send the report to the
+// host (ms * 4) even when it hasn't changed
+static uint8_t keyboard_idle_config=125;
+
+// count until idle timeout
+static uint8_t keyboard_idle_count=0;
+
+
+/**************************************************************************
+ *
+ * Public Functions - these are the API intended for the user
+ *
+ **************************************************************************/
+
+
+// initialize USB
+void usb_init(void)
+{
+ HW_CONFIG();
+ USB_FREEZE(); // enable USB
+ PLL_CONFIG(); // config PLL
+ while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
+ USB_CONFIG(); // start USB clock
+ UDCON = 0; // enable attach resistor
+ usb_configuration = 0;
+ UDIEN = (1<<EORSTE)|(1<<SOFE);
+ sei();
+}
+
+// return 0 if the USB is not configured, or the configuration
+// number selected by the HOST
+uint8_t usb_configured(void)
+{
+ return usb_configuration;
+}
+
+// send the contents of USBKeys_Array and USBKeys_Modifiers
+int8_t usb_keyboard_send(void)
+{
+ uint8_t i, intr_state, timeout;
+
+ if (!usb_configuration) return -1;
+ intr_state = SREG;
+ cli();
+ UENUM = KEYBOARD_ENDPOINT;
+ timeout = UDFNUML + 50;
+ while (1) {
+ // are we ready to transmit?
+ if (UEINTX & (1<<RWAL)) break;
+ SREG = intr_state;
+ // has the USB gone offline?
+ if (!usb_configuration) return -1;
+ // have we waited too long?
+ if (UDFNUML == timeout) return -1;
+ // get ready to try checking again
+ intr_state = SREG;
+ cli();
+ UENUM = KEYBOARD_ENDPOINT;
+ }
+ UEDATX = USBKeys_Modifiers;
+ UEDATX = 0;
+ for (i=0; i<6; i++) {
+ UEDATX = USBKeys_Array[i];
+ }
+ UEINTX = 0x3A;
+ keyboard_idle_count = 0;
+ SREG = intr_state;
+ return 0;
+}
+
+// transmit a character. 0 returned on success, -1 on error
+int8_t usb_debug_putchar(uint8_t c)
+{
+ static uint8_t previous_timeout=0;
+ uint8_t timeout, intr_state;
+
+ // if we're not online (enumerated and configured), error
+ if (!usb_configuration) return -1;
+ // interrupts are disabled so these functions can be
+ // used from the main program or interrupt context,
+ // even both in the same program!
+ intr_state = SREG;
+ cli();
+ UENUM = DEBUG_TX_ENDPOINT;
+ // if we gave up due to timeout before, don't wait again
+ if (previous_timeout) {
+ if (!(UEINTX & (1<<RWAL))) {
+ SREG = intr_state;
+ return -1;
+ }
+ previous_timeout = 0;
+ }
+ // wait for the FIFO to be ready to accept data
+ timeout = UDFNUML + 4;
+ while (1) {
+ // are we ready to transmit?
+ if (UEINTX & (1<<RWAL)) break;
+ SREG = intr_state;
+ // have we waited too long?
+ if (UDFNUML == timeout) {
+ previous_timeout = 1;
+ return -1;
+ }
+ // has the USB gone offline?
+ if (!usb_configuration) return -1;
+ // get ready to try checking again
+ intr_state = SREG;
+ cli();
+ UENUM = DEBUG_TX_ENDPOINT;
+ }
+ // actually write the byte into the FIFO
+ UEDATX = c;
+ // if this completed a packet, transmit it now!
+ if (!(UEINTX & (1<<RWAL))) {
+ UEINTX = 0x3A;
+ debug_flush_timer = 0;
+ } else {
+ debug_flush_timer = 2;
+ }
+ SREG = intr_state;
+ return 0;
+}
+
+
+// immediately transmit any buffered output.
+void usb_debug_flush_output(void)
+{
+ uint8_t intr_state;
+
+ intr_state = SREG;
+ cli();
+ if (debug_flush_timer) {
+ UENUM = DEBUG_TX_ENDPOINT;
+ while ((UEINTX & (1<<RWAL))) {
+ UEDATX = 0;
+ }
+ UEINTX = 0x3A;
+ debug_flush_timer = 0;
+ }
+ SREG = intr_state;
+}
+
+
+
+/**************************************************************************
+ *
+ * Private Functions - not intended for general user consumption....
+ *
+ **************************************************************************/
+
+
+
+// USB Device Interrupt - handle all device-level events
+// the transmit buffer flushing is triggered by the start of frame
+//
+ISR(USB_GEN_vect)
+{
+ uint8_t intbits, t, i;
+ static uint8_t div4=0;
+
+ intbits = UDINT;
+ UDINT = 0;
+ if (intbits & (1<<EORSTI)) {
+ UENUM = 0;
+ UECONX = 1;
+ UECFG0X = EP_TYPE_CONTROL;
+ UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
+ UEIENX = (1<<RXSTPE);
+ usb_configuration = 0;
+ }
+ if ((intbits & (1<<SOFI)) && usb_configuration) {
+ t = debug_flush_timer;
+ if (t) {
+ debug_flush_timer = -- t;
+ if (!t) {
+ UENUM = DEBUG_TX_ENDPOINT;
+ while ((UEINTX & (1<<RWAL))) {
+ UEDATX = 0;
+ }
+ UEINTX = 0x3A;
+ }
+ }
+ if (keyboard_idle_config && (++div4 & 3) == 0) {
+ UENUM = KEYBOARD_ENDPOINT;
+ if (UEINTX & (1<<RWAL)) {
+ keyboard_idle_count++;
+ if (keyboard_idle_count == keyboard_idle_config) {
+ keyboard_idle_count = 0;
+ UEDATX = USBKeys_Modifiers;
+ UEDATX = 0;
+ for (i=0; i<6; i++) {
+ UEDATX = USBKeys_Array[i];
+ }
+ UEINTX = 0x3A;
+ }
+ }
+ }
+ }
+}
+
+
+
+// Misc functions to wait for ready and send/receive packets
+static inline void usb_wait_in_ready(void)
+{
+ while (!(UEINTX & (1<<TXINI))) ;
+}
+static inline void usb_send_in(void)
+{
+ UEINTX = ~(1<<TXINI);
+}
+static inline void usb_wait_receive_out(void)
+{
+ while (!(UEINTX & (1<<RXOUTI))) ;
+}
+static inline void usb_ack_out(void)
+{
+ UEINTX = ~(1<<RXOUTI);
+}
+
+
+
+// USB Endpoint Interrupt - endpoint 0 is handled here. The
+// other endpoints are manipulated by the user-callable
+// functions, and the start-of-frame interrupt.
+//
+ISR(USB_COM_vect)
+{
+ uint8_t intbits;
+ const uint8_t *list;
+ const uint8_t *cfg;
+ uint8_t i, n, len, en;
+ uint8_t bmRequestType;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+ uint16_t desc_val;
+ const uint8_t *desc_addr;
+ uint8_t desc_length;
+
+ UENUM = 0;
+ intbits = UEINTX;
+ if (intbits & (1<<RXSTPI)) {
+ bmRequestType = UEDATX;
+ bRequest = UEDATX;
+ wValue = UEDATX;
+ wValue |= (UEDATX << 8);
+ wIndex = UEDATX;
+ wIndex |= (UEDATX << 8);
+ wLength = UEDATX;
+ wLength |= (UEDATX << 8);
+ UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
+ if (bRequest == GET_DESCRIPTOR) {
+ list = (const uint8_t *)descriptor_list;
+ for (i=0; ; i++) {
+ if (i >= NUM_DESC_LIST) {
+ UECONX = (1<<STALLRQ)|(1<<EPEN); //stall
+ return;
+ }
+ desc_val = pgm_read_word(list);
+ if (desc_val != wValue) {
+ list += sizeof(struct descriptor_list_struct);
+ continue;
+ }
+ list += 2;
+ desc_val = pgm_read_word(list);
+ if (desc_val != wIndex) {
+ list += sizeof(struct descriptor_list_struct)-2;
+ continue;
+ }
+ list += 2;
+ desc_addr = (const uint8_t *)pgm_read_word(list);
+ list += 2;
+ desc_length = pgm_read_byte(list);
+ break;
+ }
+ len = (wLength < 256) ? wLength : 255;
+ if (len > desc_length) len = desc_length;
+ do {
+ // wait for host ready for IN packet
+ do {
+ i = UEINTX;
+ } while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
+ if (i & (1<<RXOUTI)) return; // abort
+ // send IN packet
+ n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
+ for (i = n; i; i--) {
+ UEDATX = pgm_read_byte(desc_addr++);
+ }
+ len -= n;
+ usb_send_in();
+ } while (len || n == ENDPOINT0_SIZE);
+ return;
+ }
+ if (bRequest == SET_ADDRESS) {
+ usb_send_in();
+ usb_wait_in_ready();
+ UDADDR = wValue | (1<<ADDEN);
+ return;
+ }
+ if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
+ usb_configuration = wValue;
+ usb_send_in();
+ cfg = endpoint_config_table;
+ for (i=1; i<5; i++) {
+ UENUM = i;
+ en = pgm_read_byte(cfg++);
+ UECONX = en;
+ if (en) {
+ UECFG0X = pgm_read_byte(cfg++);
+ UECFG1X = pgm_read_byte(cfg++);
+ }
+ }
+ UERST = 0x1E;
+ UERST = 0;
+ return;
+ }
+ if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
+ usb_wait_in_ready();
+ UEDATX = usb_configuration;
+ usb_send_in();
+ return;
+ }
+
+ if (bRequest == GET_STATUS) {
+ usb_wait_in_ready();
+ i = 0;
+ #ifdef SUPPORT_ENDPOINT_HALT
+ if (bmRequestType == 0x82) {
+ UENUM = wIndex;
+ if (UECONX & (1<<STALLRQ)) i = 1;
+ UENUM = 0;
+ }
+ #endif
+ UEDATX = i;
+ UEDATX = 0;
+ usb_send_in();
+ return;
+ }
+ #ifdef SUPPORT_ENDPOINT_HALT
+ if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
+ && bmRequestType == 0x02 && wValue == 0) {
+ i = wIndex & 0x7F;
+ if (i >= 1 && i <= MAX_ENDPOINT) {
+ usb_send_in();
+ UENUM = i;
+ if (bRequest == SET_FEATURE) {
+ UECONX = (1<<STALLRQ)|(1<<EPEN);
+ } else {
+ UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN);
+ UERST = (1 << i);
+ UERST = 0;
+ }
+ return;
+ }
+ }
+ #endif
+ if (wIndex == KEYBOARD_INTERFACE) {
+ if (bmRequestType == 0xA1) {
+ if (bRequest == HID_GET_REPORT) {
+ usb_wait_in_ready();
+ UEDATX = USBKeys_Modifiers;
+ UEDATX = 0;
+ for (i=0; i<6; i++) {
+ UEDATX = USBKeys_Array[i];
+ }
+ usb_send_in();
+ return;
+ }
+ if (bRequest == HID_GET_IDLE) {
+ usb_wait_in_ready();
+ UEDATX = keyboard_idle_config;
+ usb_send_in();
+ return;
+ }
+ if (bRequest == HID_GET_PROTOCOL) {
+ usb_wait_in_ready();
+ UEDATX = keyboard_protocol;
+ usb_send_in();
+ return;
+ }
+ }
+ if (bmRequestType == 0x21) {
+ if (bRequest == HID_SET_REPORT) {
+ usb_wait_receive_out();
+ USBKeys_LEDs = UEDATX;
+ usb_ack_out();
+ usb_send_in();
+ return;
+ }
+ if (bRequest == HID_SET_IDLE) {
+ keyboard_idle_config = (wValue >> 8);
+ keyboard_idle_count = 0;
+ //usb_wait_in_ready();
+ usb_send_in();
+ return;
+ }
+ if (bRequest == HID_SET_PROTOCOL) {
+ keyboard_protocol = wValue;
+ //usb_wait_in_ready();
+ usb_send_in();
+ return;
+ }
+ }
+ }
+ if (wIndex == DEBUG_INTERFACE) {
+ if (bRequest == HID_GET_REPORT && bmRequestType == 0xA1) {
+ len = wLength;
+ do {
+ // wait for host ready for IN packet
+ do {
+ i = UEINTX;
+ } while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
+ if (i & (1<<RXOUTI)) return; // abort
+ // send IN packet
+ n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
+ for (i = n; i; i--) {
+ UEDATX = 0;
+ }
+ len -= n;
+ usb_send_in();
+ } while (len || n == ENDPOINT0_SIZE);
+ return;
+ }
+ }
+ }
+ UECONX = (1<<STALLRQ) | (1<<EPEN); // stall
+}
+
+
--- /dev/null
+#ifndef usb_serial_h__
+#define usb_serial_h__
+
+#include <stdint.h>
+#include "usb_com.h"
+
+void usb_init(void); // initialize everything
+uint8_t usb_configured(void); // is the USB port configured
+
+int8_t usb_keyboard_send(void);
+
+
+int8_t usb_debug_putchar(uint8_t c); // transmit a character
+void usb_debug_flush_output(void); // immediately transmit any buffered output
+#define USB_DEBUG_HID
+
+
+// Everything below this point is only intended for usb_serial.c
+#ifdef USB_SERIAL_PRIVATE_INCLUDE
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+
+#define EP_TYPE_CONTROL 0x00
+#define EP_TYPE_BULK_IN 0x81
+#define EP_TYPE_BULK_OUT 0x80
+#define EP_TYPE_INTERRUPT_IN 0xC1
+#define EP_TYPE_INTERRUPT_OUT 0xC0
+#define EP_TYPE_ISOCHRONOUS_IN 0x41
+#define EP_TYPE_ISOCHRONOUS_OUT 0x40
+
+#define EP_SINGLE_BUFFER 0x02
+#define EP_DOUBLE_BUFFER 0x06
+
+#define EP_SIZE(s) ((s) == 64 ? 0x30 : \
+ ((s) == 32 ? 0x20 : \
+ ((s) == 16 ? 0x10 : \
+ 0x00)))
+
+#define MAX_ENDPOINT 4
+
+#define LSB(n) (n & 255)
+#define MSB(n) ((n >> 8) & 255)
+
+#if defined(__AVR_AT90USB162__)
+#define HW_CONFIG()
+#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
+#define USB_CONFIG() (USBCON = (1<<USBE))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_ATmega32U4__)
+#define HW_CONFIG() (UHWCON = 0x01)
+#define PLL_CONFIG() (PLLCSR = 0x12)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB646__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x1A)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#elif defined(__AVR_AT90USB1286__)
+#define HW_CONFIG() (UHWCON = 0x81)
+#define PLL_CONFIG() (PLLCSR = 0x16)
+#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
+#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
+#endif
+
+// standard control endpoint request types
+#define GET_STATUS 0
+#define CLEAR_FEATURE 1
+#define SET_FEATURE 3
+#define SET_ADDRESS 5
+#define GET_DESCRIPTOR 6
+#define GET_CONFIGURATION 8
+#define SET_CONFIGURATION 9
+#define GET_INTERFACE 10
+#define SET_INTERFACE 11
+// HID (human interface device)
+#define HID_GET_REPORT 1
+#define HID_GET_IDLE 2
+#define HID_GET_PROTOCOL 3
+#define HID_SET_REPORT 9
+#define HID_SET_IDLE 10
+#define HID_SET_PROTOCOL 11
+// CDC (communication class device)
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+#endif
+#endif
###| CMake Kiibohd Controller USB Module |###
#
-# Written by Jacob Alexander in 2011 for the Kiibohd Controller
+# Written by Jacob Alexander in 2011-2013 for the Kiibohd Controller
#
# Released into the Public Domain
#
# Module C files
#
-set( USB_SRCS
- usb_com.c
- usb_keyboard_debug.c
-)
+
+#| AVR Compiler
+if ( ${COMPILER_FAMILY} MATCHES "avr" )
+
+ set( USB_SRCS
+ usb_com.c
+ avr/usb_keyboard_debug.c
+ )
+
+#| ARM Compiler
+elseif ( ${COMPILER_FAMILY} MATCHES "arm" )
+
+ set( USB_SRCS
+ usb_com.c
+ arm/usb_desc.c
+ arm/usb_dev.c
+ arm/usb_keyboard.c
+ arm/usb_mem.c
+ )
+
+endif ( ${COMPILER_FAMILY} MATCHES "avr" )
###
-/* Copyright (C) 2011 by Jacob Alexander
+/* Copyright (C) 2011-2013 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
// ----- Includes -----
// Compiler Includes
-#include <util/delay.h>
-
-// AVR Includes
+#include <Lib/USBLib.h>
// Project Includes
#include <scan_loop.h>
-#include "usb_keyboard_debug.h"
+
+// USB Includes
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+#include "avr/usb_keyboard_debug.h"
+#elif defined(_mk20dx128_)
+#include "arm/usb_keyboard.h"
+#endif
// Local Includes
#include "usb_com.h"
// ----- Includes -----
-// AVR Includes
-
// Compiler Includes
#include <stdint.h>
+++ /dev/null
-/* USB Keyboard Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-// Version 1.0: Initial Release
-// Version 1.1: Add support for Teensy 2.0
-
-#define USB_SERIAL_PRIVATE_INCLUDE
-#include "usb_keyboard.h"
-
-/**************************************************************************
- *
- * Configurable Options
- *
- **************************************************************************/
-
-// You can change these to give your code its own name.
-#define STR_MANUFACTURER L"MfgName"
-#define STR_PRODUCT L"Keyboard"
-
-
-// Mac OS-X and Linux automatically load the correct drivers. On
-// Windows, even though the driver is supplied by Microsoft, an
-// INF file is needed to load the driver. These numbers need to
-// match the INF file.
-#define VENDOR_ID 0x16C0
-#define PRODUCT_ID 0x047C
-
-
-// USB devices are supposed to implment a halt feature, which is
-// rarely (if ever) used. If you comment this line out, the halt
-// code will be removed, saving 102 bytes of space (gcc 4.3.0).
-// This is not strictly USB compliant, but works with all major
-// operating systems.
-#define SUPPORT_ENDPOINT_HALT
-
-
-
-/**************************************************************************
- *
- * Endpoint Buffer Configuration
- *
- **************************************************************************/
-
-#define ENDPOINT0_SIZE 32
-
-#define KEYBOARD_INTERFACE 0
-#define KEYBOARD_ENDPOINT 3
-#define KEYBOARD_SIZE 8
-#define KEYBOARD_BUFFER EP_DOUBLE_BUFFER
-
-static const uint8_t PROGMEM endpoint_config_table[] = {
- 0,
- 0,
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER,
- 0
-};
-
-
-/**************************************************************************
- *
- * Descriptor Data
- *
- **************************************************************************/
-
-// Descriptors are the data that your computer reads when it auto-detects
-// this USB device (called "enumeration" in USB lingo). The most commonly
-// changed items are editable at the top of this file. Changing things
-// in here should only be done by those who've read chapter 9 of the USB
-// spec and relevant portions of any USB class specifications!
-
-
-static uint8_t PROGMEM device_descriptor[] = {
- 18, // bLength
- 1, // bDescriptorType
- 0x00, 0x02, // bcdUSB
- 0, // bDeviceClass
- 0, // bDeviceSubClass
- 0, // bDeviceProtocol
- ENDPOINT0_SIZE, // bMaxPacketSize0
- LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
- LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
- 0x00, 0x01, // bcdDevice
- 1, // iManufacturer
- 2, // iProduct
- 0, // iSerialNumber
- 1 // bNumConfigurations
-};
-
-// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
-static uint8_t PROGMEM keyboard_hid_report_desc[] = {
- 0x05, 0x01, // Usage Page (Generic Desktop),
- 0x09, 0x06, // Usage (Keyboard),
- 0xA1, 0x01, // Collection (Application),
- 0x75, 0x01, // Report Size (1),
- 0x95, 0x08, // Report Count (8),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0xE0, // Usage Minimum (224),
- 0x29, 0xE7, // Usage Maximum (231),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x01, // Logical Maximum (1),
- 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x08, // Report Size (8),
- 0x81, 0x03, // Input (Constant), ;Reserved byte
- 0x95, 0x05, // Report Count (5),
- 0x75, 0x01, // Report Size (1),
- 0x05, 0x08, // Usage Page (LEDs),
- 0x19, 0x01, // Usage Minimum (1),
- 0x29, 0x05, // Usage Maximum (5),
- 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x03, // Report Size (3),
- 0x91, 0x03, // Output (Constant), ;LED report padding
- 0x95, 0x06, // Report Count (6),
- 0x75, 0x08, // Report Size (8),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x68, // Logical Maximum(104),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0x00, // Usage Minimum (0),
- 0x29, 0x68, // Usage Maximum (104),
- 0x81, 0x00, // Input (Data, Array),
- 0xc0 // End Collection
-};
-
-#define CONFIG1_DESC_SIZE (9+9+9+7)
-#define KEYBOARD_HID_DESC_OFFSET (9+9)
-static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
- // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
- 9, // bLength;
- 2, // bDescriptorType;
- LSB(CONFIG1_DESC_SIZE), // wTotalLength
- MSB(CONFIG1_DESC_SIZE),
- 1, // bNumInterfaces
- 1, // bConfigurationValue
- 0, // iConfiguration
- 0xC0, // bmAttributes
- 50, // bMaxPower
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- KEYBOARD_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x01, // bInterfaceSubClass (0x01 = Boot)
- 0x01, // bInterfaceProtocol (0x01 = Keyboard)
- 0, // iInterface
- // HID interface descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(keyboard_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- KEYBOARD_SIZE, 0, // wMaxPacketSize
- 1 // bInterval
-};
-
-// If you're desperate for a little extra code memory, these strings
-// can be completely removed if iManufacturer, iProduct, iSerialNumber
-// in the device desciptor are changed to zeros.
-struct usb_string_descriptor_struct {
- uint8_t bLength;
- uint8_t bDescriptorType;
- int16_t wString[];
-};
-static struct usb_string_descriptor_struct PROGMEM string0 = {
- 4,
- 3,
- {0x0409}
-};
-static struct usb_string_descriptor_struct PROGMEM string1 = {
- sizeof(STR_MANUFACTURER),
- 3,
- STR_MANUFACTURER
-};
-static struct usb_string_descriptor_struct PROGMEM string2 = {
- sizeof(STR_PRODUCT),
- 3,
- STR_PRODUCT
-};
-
-// This table defines which descriptor data is sent for each specific
-// request from the host (in wValue and wIndex).
-static struct descriptor_list_struct {
- uint16_t wValue;
- uint16_t wIndex;
- const uint8_t *addr;
- uint8_t length;
-} PROGMEM descriptor_list[] = {
- {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
- {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
- {0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
- {0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9},
- {0x0300, 0x0000, (const uint8_t *)&string0, 4},
- {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
- {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)}
-};
-#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
-
-
-/**************************************************************************
- *
- * Variables - these are the only non-stack RAM usage
- *
- **************************************************************************/
-
-// zero when we are not configured, non-zero when enumerated
-static volatile uint8_t usb_configuration=0;
-
-// which modifier keys are currently pressed
-// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui
-// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
-uint8_t keyboard_modifier_keys=0;
-
-// which keys are currently pressed, up to 6 keys may be down at once
-uint8_t keyboard_keys[6]={0,0,0,0,0,0};
-
-// protocol setting from the host. We use exactly the same report
-// either way, so this variable only stores the setting since we
-// are required to be able to report which setting is in use.
-static uint8_t keyboard_protocol=1;
-
-// the idle configuration, how often we send the report to the
-// host (ms * 4) even when it hasn't changed
-static uint8_t keyboard_idle_config=125;
-
-// count until idle timeout
-static uint8_t keyboard_idle_count=0;
-
-// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
-volatile uint8_t keyboard_leds=0;
-
-
-/**************************************************************************
- *
- * Public Functions - these are the API intended for the user
- *
- **************************************************************************/
-
-
-// initialize USB
-void usb_init(void)
-{
- HW_CONFIG();
- USB_FREEZE(); // enable USB
- PLL_CONFIG(); // config PLL
- while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
- USB_CONFIG(); // start USB clock
- UDCON = 0; // enable attach resistor
- usb_configuration = 0;
- UDIEN = (1<<EORSTE)|(1<<SOFE);
- sei();
-}
-
-// return 0 if the USB is not configured, or the configuration
-// number selected by the HOST
-uint8_t usb_configured(void)
-{
- return usb_configuration;
-}
-
-
-// perform a single keystroke
-int8_t usb_keyboard_press(uint8_t key, uint8_t modifier)
-{
- int8_t r;
-
- keyboard_modifier_keys = modifier;
- keyboard_keys[0] = key;
- r = usb_keyboard_send();
- if (r) return r;
- keyboard_modifier_keys = 0;
- keyboard_keys[0] = 0;
- return usb_keyboard_send();
-}
-
-// send the contents of keyboard_keys and keyboard_modifier_keys
-int8_t usb_keyboard_send(void)
-{
- uint8_t i, intr_state, timeout;
-
- if (!usb_configuration) return -1;
- intr_state = SREG;
- cli();
- UENUM = KEYBOARD_ENDPOINT;
- timeout = UDFNUML + 50;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1<<RWAL)) break;
- SREG = intr_state;
- // has the USB gone offline?
- if (!usb_configuration) return -1;
- // have we waited too long?
- if (UDFNUML == timeout) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = KEYBOARD_ENDPOINT;
- }
- UEDATX = keyboard_modifier_keys;
- UEDATX = 0;
- for (i=0; i<6; i++) {
- UEDATX = keyboard_keys[i];
- }
- UEINTX = 0x3A;
- keyboard_idle_count = 0;
- SREG = intr_state;
- return 0;
-}
-
-/**************************************************************************
- *
- * Private Functions - not intended for general user consumption....
- *
- **************************************************************************/
-
-
-
-// USB Device Interrupt - handle all device-level events
-// the transmit buffer flushing is triggered by the start of frame
-//
-ISR(USB_GEN_vect)
-{
- uint8_t intbits, t, i;
- static uint8_t div4=0;
-
- intbits = UDINT;
- UDINT = 0;
- if (intbits & (1<<EORSTI)) {
- UENUM = 0;
- UECONX = 1;
- UECFG0X = EP_TYPE_CONTROL;
- UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
- UEIENX = (1<<RXSTPE);
- usb_configuration = 0;
- }
- if ((intbits & (1<<SOFI)) && usb_configuration) {
- if (keyboard_idle_config && (++div4 & 3) == 0) {
- UENUM = KEYBOARD_ENDPOINT;
- if (UEINTX & (1<<RWAL)) {
- keyboard_idle_count++;
- if (keyboard_idle_count == keyboard_idle_config) {
- keyboard_idle_count = 0;
- UEDATX = keyboard_modifier_keys;
- UEDATX = 0;
- for (i=0; i<6; i++) {
- UEDATX = keyboard_keys[i];
- }
- UEINTX = 0x3A;
- }
- }
- }
- }
-}
-
-
-
-// Misc functions to wait for ready and send/receive packets
-static inline void usb_wait_in_ready(void)
-{
- while (!(UEINTX & (1<<TXINI))) ;
-}
-static inline void usb_send_in(void)
-{
- UEINTX = ~(1<<TXINI);
-}
-static inline void usb_wait_receive_out(void)
-{
- while (!(UEINTX & (1<<RXOUTI))) ;
-}
-static inline void usb_ack_out(void)
-{
- UEINTX = ~(1<<RXOUTI);
-}
-
-
-
-// USB Endpoint Interrupt - endpoint 0 is handled here. The
-// other endpoints are manipulated by the user-callable
-// functions, and the start-of-frame interrupt.
-//
-ISR(USB_COM_vect)
-{
- uint8_t intbits;
- const uint8_t *list;
- const uint8_t *cfg;
- uint8_t i, n, len, en;
- uint8_t bmRequestType;
- uint8_t bRequest;
- uint16_t wValue;
- uint16_t wIndex;
- uint16_t wLength;
- uint16_t desc_val;
- const uint8_t *desc_addr;
- uint8_t desc_length;
-
- UENUM = 0;
- intbits = UEINTX;
- if (intbits & (1<<RXSTPI)) {
- bmRequestType = UEDATX;
- bRequest = UEDATX;
- wValue = UEDATX;
- wValue |= (UEDATX << 8);
- wIndex = UEDATX;
- wIndex |= (UEDATX << 8);
- wLength = UEDATX;
- wLength |= (UEDATX << 8);
- UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
- if (bRequest == GET_DESCRIPTOR) {
- list = (const uint8_t *)descriptor_list;
- for (i=0; ; i++) {
- if (i >= NUM_DESC_LIST) {
- UECONX = (1<<STALLRQ)|(1<<EPEN); //stall
- return;
- }
- desc_val = pgm_read_word(list);
- if (desc_val != wValue) {
- list += sizeof(struct descriptor_list_struct);
- continue;
- }
- list += 2;
- desc_val = pgm_read_word(list);
- if (desc_val != wIndex) {
- list += sizeof(struct descriptor_list_struct)-2;
- continue;
- }
- list += 2;
- desc_addr = (const uint8_t *)pgm_read_word(list);
- list += 2;
- desc_length = pgm_read_byte(list);
- break;
- }
- len = (wLength < 256) ? wLength : 255;
- if (len > desc_length) len = desc_length;
- do {
- // wait for host ready for IN packet
- do {
- i = UEINTX;
- } while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
- if (i & (1<<RXOUTI)) return; // abort
- // send IN packet
- n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
- for (i = n; i; i--) {
- UEDATX = pgm_read_byte(desc_addr++);
- }
- len -= n;
- usb_send_in();
- } while (len || n == ENDPOINT0_SIZE);
- return;
- }
- if (bRequest == SET_ADDRESS) {
- usb_send_in();
- usb_wait_in_ready();
- UDADDR = wValue | (1<<ADDEN);
- return;
- }
- if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
- usb_configuration = wValue;
- usb_send_in();
- cfg = endpoint_config_table;
- for (i=1; i<5; i++) {
- UENUM = i;
- en = pgm_read_byte(cfg++);
- UECONX = en;
- if (en) {
- UECFG0X = pgm_read_byte(cfg++);
- UECFG1X = pgm_read_byte(cfg++);
- }
- }
- UERST = 0x1E;
- UERST = 0;
- return;
- }
- if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
- usb_wait_in_ready();
- UEDATX = usb_configuration;
- usb_send_in();
- return;
- }
-
- if (bRequest == GET_STATUS) {
- usb_wait_in_ready();
- i = 0;
- #ifdef SUPPORT_ENDPOINT_HALT
- if (bmRequestType == 0x82) {
- UENUM = wIndex;
- if (UECONX & (1<<STALLRQ)) i = 1;
- UENUM = 0;
- }
- #endif
- UEDATX = i;
- UEDATX = 0;
- usb_send_in();
- return;
- }
- #ifdef SUPPORT_ENDPOINT_HALT
- if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
- && bmRequestType == 0x02 && wValue == 0) {
- i = wIndex & 0x7F;
- if (i >= 1 && i <= MAX_ENDPOINT) {
- usb_send_in();
- UENUM = i;
- if (bRequest == SET_FEATURE) {
- UECONX = (1<<STALLRQ)|(1<<EPEN);
- } else {
- UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN);
- UERST = (1 << i);
- UERST = 0;
- }
- return;
- }
- }
- #endif
- if (wIndex == KEYBOARD_INTERFACE) {
- if (bmRequestType == 0xA1) {
- if (bRequest == HID_GET_REPORT) {
- usb_wait_in_ready();
- UEDATX = keyboard_modifier_keys;
- UEDATX = 0;
- for (i=0; i<6; i++) {
- UEDATX = keyboard_keys[i];
- }
- usb_send_in();
- return;
- }
- if (bRequest == HID_GET_IDLE) {
- usb_wait_in_ready();
- UEDATX = keyboard_idle_config;
- usb_send_in();
- return;
- }
- if (bRequest == HID_GET_PROTOCOL) {
- usb_wait_in_ready();
- UEDATX = keyboard_protocol;
- usb_send_in();
- return;
- }
- }
- if (bmRequestType == 0x21) {
- if (bRequest == HID_SET_REPORT) {
- usb_wait_receive_out();
- keyboard_leds = UEDATX;
- usb_ack_out();
- usb_send_in();
- return;
- }
- if (bRequest == HID_SET_IDLE) {
- keyboard_idle_config = (wValue >> 8);
- keyboard_idle_count = 0;
- usb_send_in();
- return;
- }
- if (bRequest == HID_SET_PROTOCOL) {
- keyboard_protocol = wValue;
- usb_send_in();
- return;
- }
- }
- }
- }
- UECONX = (1<<STALLRQ) | (1<<EPEN); // stall
-}
-
-
+++ /dev/null
-#ifndef usb_serial_h__
-#define usb_serial_h__
-
-#include <stdint.h>
-
-void usb_init(void); // initialize everything
-uint8_t usb_configured(void); // is the USB port configured
-
-int8_t usb_keyboard_press(uint8_t key, uint8_t modifier);
-int8_t usb_keyboard_send(void);
-extern uint8_t keyboard_modifier_keys;
-extern uint8_t keyboard_keys[6];
-extern volatile uint8_t keyboard_leds;
-
-#endif
-
+++ /dev/null
-/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_keyboard.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-// Version 1.0: Initial Release
-// Version 1.1: Add support for Teensy 2.0
-
-#define USB_SERIAL_PRIVATE_INCLUDE
-#include "usb_keyboard_debug.h"
-
-/**************************************************************************
- *
- * Configurable Options
- *
- **************************************************************************/
-
-// USB devices are supposed to implment a halt feature, which is
-// rarely (if ever) used. If you comment this line out, the halt
-// code will be removed, saving 102 bytes of space (gcc 4.3.0).
-// This is not strictly USB compliant, but works with all major
-// operating systems.
-#define SUPPORT_ENDPOINT_HALT
-
-
-
-/**************************************************************************
- *
- * Endpoint Buffer Configuration
- *
- **************************************************************************/
-
-#define ENDPOINT0_SIZE 32
-
-#define KEYBOARD_INTERFACE 0
-#define KEYBOARD_ENDPOINT 3
-#define KEYBOARD_SIZE 8
-#define KEYBOARD_BUFFER EP_DOUBLE_BUFFER
-
-#define DEBUG_INTERFACE 1
-#define DEBUG_TX_ENDPOINT 4
-#define DEBUG_TX_SIZE 32
-#define DEBUG_TX_BUFFER EP_DOUBLE_BUFFER
-
-static const uint8_t PROGMEM endpoint_config_table[] = {
- 0,
- 0,
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER,
- 1, EP_TYPE_INTERRUPT_IN, EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER
-};
-
-
-/**************************************************************************
- *
- * Descriptor Data
- *
- **************************************************************************/
-
-// Descriptors are the data that your computer reads when it auto-detects
-// this USB device (called "enumeration" in USB lingo). The most commonly
-// changed items are editable at the top of this file. Changing things
-// in here should only be done by those who've read chapter 9 of the USB
-// spec and relevant portions of any USB class specifications!
-
-
-static const uint8_t PROGMEM device_descriptor[] = {
- 18, // bLength
- 1, // bDescriptorType
- 0x00, 0x02, // bcdUSB
- 0, // bDeviceClass
- 0, // bDeviceSubClass
- 0, // bDeviceProtocol
- ENDPOINT0_SIZE, // bMaxPacketSize0
- LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
- LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
- 0x00, 0x01, // bcdDevice
- 1, // iManufacturer
- 2, // iProduct
- 0, // iSerialNumber
- 1 // bNumConfigurations
-};
-
-// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
-static const uint8_t PROGMEM keyboard_hid_report_desc[] = {
- 0x05, 0x01, // Usage Page (Generic Desktop),
- 0x09, 0x06, // Usage (Keyboard),
- 0xA1, 0x01, // Collection (Application),
- 0x75, 0x01, // Report Size (1),
- 0x95, 0x08, // Report Count (8),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0xE0, // Usage Minimum (224),
- 0x29, 0xE7, // Usage Maximum (231),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x01, // Logical Maximum (1),
- 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x08, // Report Size (8),
- 0x81, 0x03, // Input (Constant), ;Reserved byte
- 0x95, 0x05, // Report Count (5),
- 0x75, 0x01, // Report Size (1),
- 0x05, 0x08, // Usage Page (LEDs),
- 0x19, 0x01, // Usage Minimum (1),
- 0x29, 0x05, // Usage Maximum (5),
- 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report
- 0x95, 0x01, // Report Count (1),
- 0x75, 0x03, // Report Size (3),
- 0x91, 0x03, // Output (Constant), ;LED report padding
- 0x95, 0x06, // Report Count (6),
- 0x75, 0x08, // Report Size (8),
- 0x15, 0x00, // Logical Minimum (0),
- 0x25, 0x68, // Logical Maximum(104),
- 0x05, 0x07, // Usage Page (Key Codes),
- 0x19, 0x00, // Usage Minimum (0),
- 0x29, 0x68, // Usage Maximum (104),
- 0x81, 0x00, // Input (Data, Array),
- 0xc0 // End Collection
-};
-
-static const uint8_t PROGMEM debug_hid_report_desc[] = {
- //0x06, 0x30, 0xFF, // Usage Page 0xFF31 (vendor defined)
- 0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined)
- 0x09, 0x74, // Usage 0x74
- 0xA1, 0x53, // Collection 0x53
- 0x75, 0x08, // report size = 8 bits
- 0x15, 0x00, // logical minimum = 0
- 0x26, 0xFF, 0x00, // logical maximum = 255
- 0x95, DEBUG_TX_SIZE, // report count
- 0x09, 0x75, // usage
- 0x81, 0x02, // Input (array)
- 0xC0 // end collection
-};
-
-#define CONFIG1_DESC_SIZE (9+9+9+7+9+9+7)
-#define KEYBOARD_HID_DESC_OFFSET (9+9)
-#define DEBUG_HID_DESC_OFFSET (9+9+9+7+9)
-static const uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = {
- // configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
- 9, // bLength;
- 2, // bDescriptorType;
- LSB(CONFIG1_DESC_SIZE), // wTotalLength
- MSB(CONFIG1_DESC_SIZE),
- 2, // bNumInterfaces
- 1, // bConfigurationValue
- 0, // iConfiguration
- 0xC0, // bmAttributes
- 50, // bMaxPower
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- KEYBOARD_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x01, // bInterfaceSubClass (0x01 = Boot)
- 0x01, // bInterfaceProtocol (0x01 = Keyboard)
- 0, // iInterface
- // HID interface descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(keyboard_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- KEYBOARD_SIZE, 0, // wMaxPacketSize
- 1, // bInterval
- // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
- 9, // bLength
- 4, // bDescriptorType
- DEBUG_INTERFACE, // bInterfaceNumber
- 0, // bAlternateSetting
- 1, // bNumEndpoints
- 0x03, // bInterfaceClass (0x03 = HID)
- 0x00, // bInterfaceSubClass
- 0x00, // bInterfaceProtocol
- 0, // iInterface
- // HID interface descriptor, HID 1.11 spec, section 6.2.1
- 9, // bLength
- 0x21, // bDescriptorType
- 0x11, 0x01, // bcdHID
- 0, // bCountryCode
- 1, // bNumDescriptors
- 0x22, // bDescriptorType
- sizeof(debug_hid_report_desc), // wDescriptorLength
- 0,
- // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
- 7, // bLength
- 5, // bDescriptorType
- DEBUG_TX_ENDPOINT | 0x80, // bEndpointAddress
- 0x03, // bmAttributes (0x03=intr)
- DEBUG_TX_SIZE, 0, // wMaxPacketSize
- 1 // bInterval
-};
-
-// If you're desperate for a little extra code memory, these strings
-// can be completely removed if iManufacturer, iProduct, iSerialNumber
-// in the device desciptor are changed to zeros.
-struct usb_string_descriptor_struct {
- uint8_t bLength;
- uint8_t bDescriptorType;
- int16_t wString[];
-};
-static const struct usb_string_descriptor_struct PROGMEM string0 = {
- 4,
- 3,
- {0x0409}
-};
-static const struct usb_string_descriptor_struct PROGMEM string1 = {
- sizeof(STR_MANUFACTURER),
- 3,
- STR_MANUFACTURER
-};
-static const struct usb_string_descriptor_struct PROGMEM string2 = {
- sizeof(STR_PRODUCT),
- 3,
- STR_PRODUCT
-};
-
-// This table defines which descriptor data is sent for each specific
-// request from the host (in wValue and wIndex).
-static const struct descriptor_list_struct {
- uint16_t wValue;
- uint16_t wIndex;
- const uint8_t *addr;
- uint8_t length;
-} PROGMEM descriptor_list[] = {
- {0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)},
- {0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)},
- {0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)},
- {0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9},
- {0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)},
- {0x2100, DEBUG_INTERFACE, config1_descriptor+DEBUG_HID_DESC_OFFSET, 9},
- {0x0300, 0x0000, (const uint8_t *)&string0, 4},
- {0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)},
- {0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)}
-};
-#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct))
-
-
-/**************************************************************************
- *
- * Variables - these are the only non-stack RAM usage
- *
- **************************************************************************/
-
-// zero when we are not configured, non-zero when enumerated
-static volatile uint8_t usb_configuration=0;
-
-// the time remaining before we transmit any partially full
-// packet, or send a zero length packet.
-static volatile uint8_t debug_flush_timer=0;
-
-// protocol setting from the host. We use exactly the same report
-// either way, so this variable only stores the setting since we
-// are required to be able to report which setting is in use.
-static uint8_t keyboard_protocol=1;
-
-// the idle configuration, how often we send the report to the
-// host (ms * 4) even when it hasn't changed
-static uint8_t keyboard_idle_config=125;
-
-// count until idle timeout
-static uint8_t keyboard_idle_count=0;
-
-
-/**************************************************************************
- *
- * Public Functions - these are the API intended for the user
- *
- **************************************************************************/
-
-
-// initialize USB
-void usb_init(void)
-{
- HW_CONFIG();
- USB_FREEZE(); // enable USB
- PLL_CONFIG(); // config PLL
- while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
- USB_CONFIG(); // start USB clock
- UDCON = 0; // enable attach resistor
- usb_configuration = 0;
- UDIEN = (1<<EORSTE)|(1<<SOFE);
- sei();
-}
-
-// return 0 if the USB is not configured, or the configuration
-// number selected by the HOST
-uint8_t usb_configured(void)
-{
- return usb_configuration;
-}
-
-
-// perform a single keystroke
-int8_t usb_keyboard_press(uint8_t key, uint8_t modifier)
-{
- int8_t r;
-
- USBKeys_Modifiers = modifier;
- USBKeys_Array[0] = key;
- r = usb_keyboard_send();
- if (r) return r;
- USBKeys_Modifiers = 0;
- USBKeys_Array[0] = 0;
- return usb_keyboard_send();
-}
-
-// send the contents of USBKeys_Array and USBKeys_Modifiers
-int8_t usb_keyboard_send(void)
-{
- uint8_t i, intr_state, timeout;
-
- if (!usb_configuration) return -1;
- intr_state = SREG;
- cli();
- UENUM = KEYBOARD_ENDPOINT;
- timeout = UDFNUML + 50;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1<<RWAL)) break;
- SREG = intr_state;
- // has the USB gone offline?
- if (!usb_configuration) return -1;
- // have we waited too long?
- if (UDFNUML == timeout) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = KEYBOARD_ENDPOINT;
- }
- UEDATX = USBKeys_Modifiers;
- UEDATX = 0;
- for (i=0; i<6; i++) {
- UEDATX = USBKeys_Array[i];
- }
- UEINTX = 0x3A;
- keyboard_idle_count = 0;
- SREG = intr_state;
- return 0;
-}
-
-// transmit a character. 0 returned on success, -1 on error
-int8_t usb_debug_putchar(uint8_t c)
-{
- static uint8_t previous_timeout=0;
- uint8_t timeout, intr_state;
-
- // if we're not online (enumerated and configured), error
- if (!usb_configuration) return -1;
- // interrupts are disabled so these functions can be
- // used from the main program or interrupt context,
- // even both in the same program!
- intr_state = SREG;
- cli();
- UENUM = DEBUG_TX_ENDPOINT;
- // if we gave up due to timeout before, don't wait again
- if (previous_timeout) {
- if (!(UEINTX & (1<<RWAL))) {
- SREG = intr_state;
- return -1;
- }
- previous_timeout = 0;
- }
- // wait for the FIFO to be ready to accept data
- timeout = UDFNUML + 4;
- while (1) {
- // are we ready to transmit?
- if (UEINTX & (1<<RWAL)) break;
- SREG = intr_state;
- // have we waited too long?
- if (UDFNUML == timeout) {
- previous_timeout = 1;
- return -1;
- }
- // has the USB gone offline?
- if (!usb_configuration) return -1;
- // get ready to try checking again
- intr_state = SREG;
- cli();
- UENUM = DEBUG_TX_ENDPOINT;
- }
- // actually write the byte into the FIFO
- UEDATX = c;
- // if this completed a packet, transmit it now!
- if (!(UEINTX & (1<<RWAL))) {
- UEINTX = 0x3A;
- debug_flush_timer = 0;
- } else {
- debug_flush_timer = 2;
- }
- SREG = intr_state;
- return 0;
-}
-
-
-// immediately transmit any buffered output.
-void usb_debug_flush_output(void)
-{
- uint8_t intr_state;
-
- intr_state = SREG;
- cli();
- if (debug_flush_timer) {
- UENUM = DEBUG_TX_ENDPOINT;
- while ((UEINTX & (1<<RWAL))) {
- UEDATX = 0;
- }
- UEINTX = 0x3A;
- debug_flush_timer = 0;
- }
- SREG = intr_state;
-}
-
-
-
-/**************************************************************************
- *
- * Private Functions - not intended for general user consumption....
- *
- **************************************************************************/
-
-
-
-// USB Device Interrupt - handle all device-level events
-// the transmit buffer flushing is triggered by the start of frame
-//
-ISR(USB_GEN_vect)
-{
- uint8_t intbits, t, i;
- static uint8_t div4=0;
-
- intbits = UDINT;
- UDINT = 0;
- if (intbits & (1<<EORSTI)) {
- UENUM = 0;
- UECONX = 1;
- UECFG0X = EP_TYPE_CONTROL;
- UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER;
- UEIENX = (1<<RXSTPE);
- usb_configuration = 0;
- }
- if ((intbits & (1<<SOFI)) && usb_configuration) {
- t = debug_flush_timer;
- if (t) {
- debug_flush_timer = -- t;
- if (!t) {
- UENUM = DEBUG_TX_ENDPOINT;
- while ((UEINTX & (1<<RWAL))) {
- UEDATX = 0;
- }
- UEINTX = 0x3A;
- }
- }
- if (keyboard_idle_config && (++div4 & 3) == 0) {
- UENUM = KEYBOARD_ENDPOINT;
- if (UEINTX & (1<<RWAL)) {
- keyboard_idle_count++;
- if (keyboard_idle_count == keyboard_idle_config) {
- keyboard_idle_count = 0;
- UEDATX = USBKeys_Modifiers;
- UEDATX = 0;
- for (i=0; i<6; i++) {
- UEDATX = USBKeys_Array[i];
- }
- UEINTX = 0x3A;
- }
- }
- }
- }
-}
-
-
-
-// Misc functions to wait for ready and send/receive packets
-static inline void usb_wait_in_ready(void)
-{
- while (!(UEINTX & (1<<TXINI))) ;
-}
-static inline void usb_send_in(void)
-{
- UEINTX = ~(1<<TXINI);
-}
-static inline void usb_wait_receive_out(void)
-{
- while (!(UEINTX & (1<<RXOUTI))) ;
-}
-static inline void usb_ack_out(void)
-{
- UEINTX = ~(1<<RXOUTI);
-}
-
-
-
-// USB Endpoint Interrupt - endpoint 0 is handled here. The
-// other endpoints are manipulated by the user-callable
-// functions, and the start-of-frame interrupt.
-//
-ISR(USB_COM_vect)
-{
- uint8_t intbits;
- const uint8_t *list;
- const uint8_t *cfg;
- uint8_t i, n, len, en;
- uint8_t bmRequestType;
- uint8_t bRequest;
- uint16_t wValue;
- uint16_t wIndex;
- uint16_t wLength;
- uint16_t desc_val;
- const uint8_t *desc_addr;
- uint8_t desc_length;
-
- UENUM = 0;
- intbits = UEINTX;
- if (intbits & (1<<RXSTPI)) {
- bmRequestType = UEDATX;
- bRequest = UEDATX;
- wValue = UEDATX;
- wValue |= (UEDATX << 8);
- wIndex = UEDATX;
- wIndex |= (UEDATX << 8);
- wLength = UEDATX;
- wLength |= (UEDATX << 8);
- UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI));
- if (bRequest == GET_DESCRIPTOR) {
- list = (const uint8_t *)descriptor_list;
- for (i=0; ; i++) {
- if (i >= NUM_DESC_LIST) {
- UECONX = (1<<STALLRQ)|(1<<EPEN); //stall
- return;
- }
- desc_val = pgm_read_word(list);
- if (desc_val != wValue) {
- list += sizeof(struct descriptor_list_struct);
- continue;
- }
- list += 2;
- desc_val = pgm_read_word(list);
- if (desc_val != wIndex) {
- list += sizeof(struct descriptor_list_struct)-2;
- continue;
- }
- list += 2;
- desc_addr = (const uint8_t *)pgm_read_word(list);
- list += 2;
- desc_length = pgm_read_byte(list);
- break;
- }
- len = (wLength < 256) ? wLength : 255;
- if (len > desc_length) len = desc_length;
- do {
- // wait for host ready for IN packet
- do {
- i = UEINTX;
- } while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
- if (i & (1<<RXOUTI)) return; // abort
- // send IN packet
- n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
- for (i = n; i; i--) {
- UEDATX = pgm_read_byte(desc_addr++);
- }
- len -= n;
- usb_send_in();
- } while (len || n == ENDPOINT0_SIZE);
- return;
- }
- if (bRequest == SET_ADDRESS) {
- usb_send_in();
- usb_wait_in_ready();
- UDADDR = wValue | (1<<ADDEN);
- return;
- }
- if (bRequest == SET_CONFIGURATION && bmRequestType == 0) {
- usb_configuration = wValue;
- usb_send_in();
- cfg = endpoint_config_table;
- for (i=1; i<5; i++) {
- UENUM = i;
- en = pgm_read_byte(cfg++);
- UECONX = en;
- if (en) {
- UECFG0X = pgm_read_byte(cfg++);
- UECFG1X = pgm_read_byte(cfg++);
- }
- }
- UERST = 0x1E;
- UERST = 0;
- return;
- }
- if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) {
- usb_wait_in_ready();
- UEDATX = usb_configuration;
- usb_send_in();
- return;
- }
-
- if (bRequest == GET_STATUS) {
- usb_wait_in_ready();
- i = 0;
- #ifdef SUPPORT_ENDPOINT_HALT
- if (bmRequestType == 0x82) {
- UENUM = wIndex;
- if (UECONX & (1<<STALLRQ)) i = 1;
- UENUM = 0;
- }
- #endif
- UEDATX = i;
- UEDATX = 0;
- usb_send_in();
- return;
- }
- #ifdef SUPPORT_ENDPOINT_HALT
- if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE)
- && bmRequestType == 0x02 && wValue == 0) {
- i = wIndex & 0x7F;
- if (i >= 1 && i <= MAX_ENDPOINT) {
- usb_send_in();
- UENUM = i;
- if (bRequest == SET_FEATURE) {
- UECONX = (1<<STALLRQ)|(1<<EPEN);
- } else {
- UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN);
- UERST = (1 << i);
- UERST = 0;
- }
- return;
- }
- }
- #endif
- if (wIndex == KEYBOARD_INTERFACE) {
- if (bmRequestType == 0xA1) {
- if (bRequest == HID_GET_REPORT) {
- usb_wait_in_ready();
- UEDATX = USBKeys_Modifiers;
- UEDATX = 0;
- for (i=0; i<6; i++) {
- UEDATX = USBKeys_Array[i];
- }
- usb_send_in();
- return;
- }
- if (bRequest == HID_GET_IDLE) {
- usb_wait_in_ready();
- UEDATX = keyboard_idle_config;
- usb_send_in();
- return;
- }
- if (bRequest == HID_GET_PROTOCOL) {
- usb_wait_in_ready();
- UEDATX = keyboard_protocol;
- usb_send_in();
- return;
- }
- }
- if (bmRequestType == 0x21) {
- if (bRequest == HID_SET_REPORT) {
- usb_wait_receive_out();
- USBKeys_LEDs = UEDATX;
- usb_ack_out();
- usb_send_in();
- return;
- }
- if (bRequest == HID_SET_IDLE) {
- keyboard_idle_config = (wValue >> 8);
- keyboard_idle_count = 0;
- //usb_wait_in_ready();
- usb_send_in();
- return;
- }
- if (bRequest == HID_SET_PROTOCOL) {
- keyboard_protocol = wValue;
- //usb_wait_in_ready();
- usb_send_in();
- return;
- }
- }
- }
- if (wIndex == DEBUG_INTERFACE) {
- if (bRequest == HID_GET_REPORT && bmRequestType == 0xA1) {
- len = wLength;
- do {
- // wait for host ready for IN packet
- do {
- i = UEINTX;
- } while (!(i & ((1<<TXINI)|(1<<RXOUTI))));
- if (i & (1<<RXOUTI)) return; // abort
- // send IN packet
- n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE;
- for (i = n; i; i--) {
- UEDATX = 0;
- }
- len -= n;
- usb_send_in();
- } while (len || n == ENDPOINT0_SIZE);
- return;
- }
- }
- }
- UECONX = (1<<STALLRQ) | (1<<EPEN); // stall
-}
-
-
+++ /dev/null
-#ifndef usb_serial_h__
-#define usb_serial_h__
-
-#include <stdint.h>
-#include "usb_com.h"
-
-void usb_init(void); // initialize everything
-uint8_t usb_configured(void); // is the USB port configured
-
-int8_t usb_keyboard_press(uint8_t key, uint8_t modifier);
-int8_t usb_keyboard_send(void);
-
-
-int8_t usb_debug_putchar(uint8_t c); // transmit a character
-void usb_debug_flush_output(void); // immediately transmit any buffered output
-#define USB_DEBUG_HID
-
-
-// Everything below this point is only intended for usb_serial.c
-#ifdef USB_SERIAL_PRIVATE_INCLUDE
-#include <avr/io.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-
-#define EP_TYPE_CONTROL 0x00
-#define EP_TYPE_BULK_IN 0x81
-#define EP_TYPE_BULK_OUT 0x80
-#define EP_TYPE_INTERRUPT_IN 0xC1
-#define EP_TYPE_INTERRUPT_OUT 0xC0
-#define EP_TYPE_ISOCHRONOUS_IN 0x41
-#define EP_TYPE_ISOCHRONOUS_OUT 0x40
-
-#define EP_SINGLE_BUFFER 0x02
-#define EP_DOUBLE_BUFFER 0x06
-
-#define EP_SIZE(s) ((s) == 64 ? 0x30 : \
- ((s) == 32 ? 0x20 : \
- ((s) == 16 ? 0x10 : \
- 0x00)))
-
-#define MAX_ENDPOINT 4
-
-#define LSB(n) (n & 255)
-#define MSB(n) ((n >> 8) & 255)
-
-#if defined(__AVR_AT90USB162__)
-#define HW_CONFIG()
-#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
-#define USB_CONFIG() (USBCON = (1<<USBE))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_ATmega32U4__)
-#define HW_CONFIG() (UHWCON = 0x01)
-#define PLL_CONFIG() (PLLCSR = 0x12)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_AT90USB646__)
-#define HW_CONFIG() (UHWCON = 0x81)
-#define PLL_CONFIG() (PLLCSR = 0x1A)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#elif defined(__AVR_AT90USB1286__)
-#define HW_CONFIG() (UHWCON = 0x81)
-#define PLL_CONFIG() (PLLCSR = 0x16)
-#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
-#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
-#endif
-
-// standard control endpoint request types
-#define GET_STATUS 0
-#define CLEAR_FEATURE 1
-#define SET_FEATURE 3
-#define SET_ADDRESS 5
-#define GET_DESCRIPTOR 6
-#define GET_CONFIGURATION 8
-#define SET_CONFIGURATION 9
-#define GET_INTERFACE 10
-#define SET_INTERFACE 11
-// HID (human interface device)
-#define HID_GET_REPORT 1
-#define HID_GET_IDLE 2
-#define HID_GET_PROTOCOL 3
-#define HID_SET_REPORT 9
-#define HID_SET_IDLE 10
-#define HID_SET_PROTOCOL 11
-// CDC (communication class device)
-#define CDC_SET_LINE_CODING 0x20
-#define CDC_GET_LINE_CODING 0x21
-#define CDC_SET_CONTROL_LINE_STATE 0x22
-#endif
-#endif
#| Compiler Flags
-add_definitions( "-mcpu=${CPU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" )
+add_definitions( "-mcpu=${CPU} -DF_CPU=${F_CPU} -D_${CHIP}_=1 -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS} -I${CMAKE_CURRENT_SOURCE_DIR}" )
#| Linker Flags
#| Compiler Flags
-add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS}" )
+add_definitions( "-mmcu=${MCU} -DF_CPU=${F_CPU} -D_${MCU}_=1 -O${OPT} ${TUNING} ${WARN} ${CSTANDARD} ${GENDEPFLAGS} -I${CMAKE_CURRENT_SOURCE_DIR}" )
#| Linker Flags
set( HEX_FLAGS -O ${FORMAT} -R .eeprom -R .fuse -R .lock -R .signature )
-#| Eep Flags
+#| Eep Flags (XXX, I've removed this target from the builds, but keeping the set line as a note)
set( EEP_FLAGS -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ${FORMAT} )
-/* Copyright (C) 2011 by Jacob Alexander
+/* Copyright (C) 2011-2013 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
// ----- Includes -----
-// AVR Includes
-#include <avr/io.h>
-#include <avr/interrupt.h>
+// Compiler Includes
+#include <Lib/MainLib.h>
// Project Includes
#include <macro.h>
// ----- Macros -----
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
+#endif
inline void pinSetup(void)
{
+// AVR
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
// For each pin, 0=input, 1=output
#if defined(__AVR_AT90USB1286__)
DDRA = 0x00;
PORTD = 0x00;
PORTE = 0x00;
PORTF = 0x00;
+
+// ARM
+#elif defined(_mk20dx128_)
+ // TODO
+#endif
}
-int main(void)
+
+inline void usbTimerSetup(void)
{
+// AVR
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
// Setup with 16 MHz clock
CPU_PRESCALE( 0 );
+ // Setup ISR Timer for flagging a kepress send to USB
+ // Set to 256 * 1024 (8 bit timer with Clock/1024 prescalar) timer
+ TCCR0A = 0x00;
+ TCCR0B = 0x03;
+ TIMSK0 = (1 << TOIE0);
+
+// ARM
+#elif defined(_mk20dx128_)
+ // TODO
+#endif
+}
+
+
+int main(void)
+{
// Configuring Pins
pinSetup();
init_errorLED();
usb_setup();
// Setup ISR Timer for flagging a kepress send to USB
- // Set to 256 * 1024 (8 bit timer with Clock/1024 prescalar) timer
- TCCR0A = 0x00;
- TCCR0B = 0x03;
- TIMSK0 = (1 << TOIE0);
+ usbTimerSetup();
// Main Detection Loop
uint8_t ledTimer = 15; // Enable LED for a short time
}
}
-// USB Keyboard Data Send Counter Interrupt
+
+// ----- Interrupts -----
+
+// AVR - USB Keyboard Data Send Counter Interrupt
+#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
+
ISR( TIMER0_OVF_vect )
{
sendKeypressCounter++;
}
}
+// ARM - USB Keyboard Data Send Counter Interrupt
+#elif defined(_mk20dx128_)
+ // TODO
+#endif
+
projects / kiibohd-controller.git / commitdiff