Adding basic remote capabilities + UART Rx DMA buffers

[kiibohd-controller.git] / Scan / STLcd / capabilities.kll

diff --git a/Scan/STLcd/capabilities.kll b/Scan/STLcd/capabilities.kll
index 49319d227f02d87a2310893a4986f7df71091975..d5daaead24d067ece823b11b79dc52d9d46b3017 100644 (file)
--- a/Scan/STLcd/capabilities.kll
+++ b/Scan/STLcd/capabilities.kll
@@ -63,3 +63,15 @@ STLcdDefaultImage = "
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 ";
 
+
+# Layer Status Display
+
+LCDLayerDisplay      => LCD_layerStack_capability();
+LCDLayerDisplayExact => LCD_layerStackExact_capability( display : 1, stack1 : 2, stack2 : 2, stack3 : 2, stack4 : 2 );
+
+
+# LCD Module Enabled
+
+LCDEnabled => LCDEnabled_define;
+LCDEnabled = 1;
+