// Project Includes
#include <cli.h>
+#include <kll.h>
#include <led.h>
#include <print.h>
// ----- Function Declarations -----
// CLI Functions
-void cliFunc_echo( char* args );
-void cliFunc_i2cRecv( char* args );
-void cliFunc_i2cSend( char* args );
-void cliFunc_ledTest( char* args );
-void cliFunc_ledZero( char* args );
+void cliFunc_i2cRecv ( char* args );
+void cliFunc_i2cSend ( char* args );
+void cliFunc_ledRPage( char* args );
+void cliFunc_ledStart( char* args );
+void cliFunc_ledTest ( char* args );
+void cliFunc_ledWPage( char* args );
+void cliFunc_ledZero ( char* args );
uint8_t I2C_TxBufferPop();
void I2C_BufferPush( uint8_t byte, I2C_Buffer *buffer );
// Scan Module command dictionary
CLIDict_Entry( i2cRecv, "Send I2C sequence of bytes and expect a reply of 1 byte on the last sequence." NL "\t\tUse |'s to split sequences with a stop." );
CLIDict_Entry( i2cSend, "Send I2C sequence of bytes. Use |'s to split sequences with a stop." );
+CLIDict_Entry( ledRPage, "Read the given register page." );
+CLIDict_Entry( ledStart, "Disable software shutdown." );
CLIDict_Entry( ledTest, "Test out the led pages." );
+CLIDict_Entry( ledWPage, "Write to given register page starting at address. i.e. 0x2 0x24 0xF0 0x12" );
CLIDict_Entry( ledZero, "Zero out LED register pages (non-configuration)." );
CLIDict_Def( ledCLIDict, "ISSI LED Module Commands" ) = {
CLIDict_Item( i2cRecv ),
CLIDict_Item( i2cSend ),
+ CLIDict_Item( ledRPage ),
+ CLIDict_Item( ledStart ),
CLIDict_Item( ledTest ),
+ CLIDict_Item( ledWPage ),
CLIDict_Item( ledZero ),
{ 0, 0, 0 } // Null entry for dictionary end
};
LED_Buffer LED_pageBuffer;
// A bit mask determining which LEDs are enabled in the ISSI chip
-// 0x00 -> 0x11
-const uint8_t LED_ledEnableMask[] = {
-0xE8, // I2C address
-0x00, // Starting register address
-0xFF, 0xFF, // C1-1 -> C1-16
-0xFF, 0xFF, // C2-1 -> C2-16
-0xFF, 0xFF, // C3-1 -> C3-16
-0xFF, 0xFF, // C4-1 -> C4-16
-0xFF, 0xFF, // C5-1 -> C5-16
-0xFF, 0xFF, // C6-1 -> C6-16
-0xFF, 0xFF, // C7-1 -> C7-16
-0xFF, 0xFF, // C8-1 -> C8-16
-0xFF, 0xFF, // C9-1 -> C9-16
+const uint8_t LED_ledEnableMask1[] = {
+ 0xE8, // I2C address
+ 0x00, // Starting register address
+ ISSILedMask1_define
};
-// XXX Pre-fill example of buffers
-const uint8_t examplePage[] = {
-0xE8, // I2C address
-0x24, // Starting register address
-0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, // C1-1 -> C1-16
-0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, // C2-1 -> C2-16
-0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, // C3-1 -> C3-16
-0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F, // C4-1 -> C4-16
-0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, // C5-1 -> C5-16
-0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F, // C6-1 -> C6-16
-0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, // C7-1 -> C7-16
-0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, // C8-1 -> C8-16
-0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, // C9-1 -> C9-16
+// Default LED brightness
+const uint8_t LED_defaultBrightness1[] = {
+ 0xE8, // I2C address
+ 0x24, // Starting register address
+ ISSILedBrightness1_define
};
I2C0_FLT = 4;
I2C0_C1 = I2C_C1_IICEN;
I2C0_C2 = I2C_C2_HDRS; // High drive select
-//},
// Enable I2C Interrupt
NVIC_ENABLE_IRQ( IRQ_I2C0 );
}
+void LED_readPage( uint8_t len, uint8_t page )
+{
+ // Page Setup
+ uint8_t pageSetup[] = { 0xE8, 0xFD, page };
+
+ // Setup page
+ while ( I2C_Send( pageSetup, sizeof( pageSetup ), 0 ) == 0 )
+ delay(1);
+
+ // Register Setup
+ uint8_t regSetup[] = { 0xE8, 0x00 };
+
+ // Setup starting register
+ while ( I2C_Send( regSetup, sizeof( regSetup ), 0 ) == 0 )
+ delay(1);
+
+ // Register Read Command
+ uint8_t regReadCmd[] = { 0xE9 };
+
+ // Read each register in the page
+ for ( uint8_t reg = 0; reg < len; reg++ )
+ {
+ // Request register data
+ while ( I2C_Send( regReadCmd, sizeof( regReadCmd ), 0 ) == 0 )
+ delay(1);
+ }
+}
+
void LED_writeReg( uint8_t reg, uint8_t val, uint8_t page )
{
// Page Setup
LED_zeroPages( 0x0B, 1, 0x00, 0x0C ); // Control Registers
// Disable Hardware shutdown of ISSI chip (pull high)
- GPIOD_PDDR |= (1<<1);
- PORTD_PCR1 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
- GPIOD_PSOR |= (1<<1);
+ GPIOB_PDDR |= (1<<16);
+ PORTB_PCR16 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
+ GPIOB_PSOR |= (1<<16);
// Clear LED Pages
LED_zeroPages( 0x00, 8, 0x00, 0xB4 ); // LED Registers
// Enable LEDs based upon mask
- LED_sendPage( (uint8_t*)LED_ledEnableMask, sizeof( LED_ledEnableMask ), 0 );
+ LED_sendPage( (uint8_t*)LED_ledEnableMask1, sizeof( LED_ledEnableMask1 ), 0 );
+
+ // Set default brightness
+ LED_sendPage( (uint8_t*)LED_defaultBrightness1, sizeof( LED_defaultBrightness1 ), 0 );
// Disable Software shutdown of ISSI chip
LED_writeReg( 0x0A, 0x01, 0x0B );
void I2C_BufferPush( uint8_t byte, I2C_Buffer *buffer )
{
+ dbug_msg("DATA: ");
+ printHex( byte );
+
// Make sure buffer isn't full
if ( buffer->tail + 1 == buffer->head || ( buffer->head > buffer->tail && buffer->tail + 1 - buffer->size == buffer->head ) )
{
I2C_Send( buffer, bufferLen, 1 ); // Only 1 byte is ever read at a time with the ISSI chip
}
+void cliFunc_ledRPage( char* args )
+{
+ // Parse number from argument
+ // NOTE: Only first argument is used
+ char* arg1Ptr;
+ char* arg2Ptr;
+ CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
+
+ // Default to 0 if no argument is given
+ uint8_t page = 0;
+
+ if ( arg1Ptr[0] != '\0' )
+ {
+ page = (uint8_t)numToInt( arg1Ptr );
+ }
+
+ // No \r\n by default after the command is entered
+ print( NL );
+
+ LED_readPage( 0xB4, page );
+}
+
+void cliFunc_ledWPage( char* args )
+{
+ char* curArgs;
+ char* arg1Ptr;
+ char* arg2Ptr = args;
+
+ // First process page and starting address
+ curArgs = arg2Ptr;
+ CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
+
+ // Stop processing args if no more are found
+ if ( *arg1Ptr == '\0' )
+ return;
+ uint8_t page[] = { 0xE8, 0xFD, numToInt( arg1Ptr ) };
+
+ curArgs = arg2Ptr;
+ CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
+
+ // Stop processing args if no more are found
+ if ( *arg1Ptr == '\0' )
+ return;
+ uint8_t data[] = { 0xE8, numToInt( arg1Ptr ), 0 };
+
+ // Set the register page
+ while ( I2C_Send( page, sizeof( page ), 0 ) == 0 )
+ delay(1);
+
+ // Process all args
+ for ( ;; )
+ {
+ curArgs = arg2Ptr;
+ CLI_argumentIsolation( curArgs, &arg1Ptr, &arg2Ptr );
+
+ // Stop processing args if no more are found
+ if ( *arg1Ptr == '\0' )
+ break;
+
+ data[2] = numToInt( arg1Ptr );
+
+ // Write register location and data to I2C
+ while ( I2C_Send( data, sizeof( data ), 0 ) == 0 )
+ delay(1);
+
+ // Increment address
+ data[1]++;
+ }
+}
+
+void cliFunc_ledStart( char* args )
+{
+ print( NL ); // No \r\n by default after the command is entered
+ LED_zeroPages( 0x0B, 1, 0x00, 0x0C ); // Control Registers
+ //LED_zeroPages( 0x00, 8, 0x00, 0xB4 ); // LED Registers
+ LED_writeReg( 0x0A, 0x01, 0x0B );
+ LED_sendPage( (uint8_t*)LED_ledEnableMask1, sizeof( LED_ledEnableMask1 ), 0 );
+
+}
+
void cliFunc_ledTest( char* args )
{
print( NL ); // No \r\n by default after the command is entered
- LED_sendPage( (uint8_t*)examplePage, sizeof( examplePage ), 0 );
+ LED_sendPage( (uint8_t*)LED_defaultBrightness1, sizeof( LED_defaultBrightness1 ), 0 );
}
void cliFunc_ledZero( char* args )