#include <cli.h>
#include <led.h>
#include <print.h>
+#include <led_conf.h> // Located with scan_loop.c
// Local Includes
#include "led_scan.h"
0x43, 0x43, // C9-1 -> C9-16
};
*/
+
+/*
const uint8_t LED_ledEnableMask[] = {
0xE8, // I2C address
0x00, // Starting register address
0x00, 0x00, // C8-1 -> C8-16
0x00, 0x00, // C9-1 -> C9-16
};
+*/
+/*
// XXX Pre-fill example of buffers
const uint8_t examplePage[] = {
0xE8, // I2C address
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C8-1 -> C8-16
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C9-1 -> C9-16
};
+*/
-/*
// XXX Pre-fill example of buffers
const uint8_t examplePage[] = {
0xE8, // I2C address
0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F, // C8-1 -> C8-16
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, // C9-1 -> C9-16
};
-*/
// Initialize I2C
I2C_setup();
- /* TODO Make work
// Zero out Frame Registers
// This needs to be done before disabling the hardware shutdown (or the leds will do undefined things)
LED_zeroPages( 0x0B, 1, 0x00, 0x0C ); // Control Registers
// Disable Hardware shutdown of ISSI chip (pull high)
- GPIOD_PDDR |= (1<<1);
- PORTD_PCR1 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
- GPIOD_PSOR |= (1<<1);
+ GPIOB_PDDR |= (1<<16);
+ PORTB_PCR16 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
+ GPIOB_PSOR |= (1<<16);
// Clear LED Pages
LED_zeroPages( 0x00, 8, 0x00, 0xB4 ); // LED Registers
// Disable Software shutdown of ISSI chip
LED_writeReg( 0x0A, 0x01, 0x0B );
- */
}