#include <cli.h>
#include <led.h>
#include <print.h>
+#include <led_conf.h> // Located with scan_loop.c
// Local Includes
#include "led_scan.h"
// ----- Function Declarations -----
// CLI Functions
-void cliFunc_echo( char* args );
void cliFunc_i2cRecv( char* args );
void cliFunc_i2cSend( char* args );
+void cliFunc_ledPage( char* args );
+void cliFunc_ledStart( char* args );
void cliFunc_ledTest( char* args );
void cliFunc_ledZero( char* args );
// Scan Module command dictionary
CLIDict_Entry( i2cRecv, "Send I2C sequence of bytes and expect a reply of 1 byte on the last sequence." NL "\t\tUse |'s to split sequences with a stop." );
CLIDict_Entry( i2cSend, "Send I2C sequence of bytes. Use |'s to split sequences with a stop." );
+CLIDict_Entry( ledPage, "Read the given register page." );
+CLIDict_Entry( ledStart, "Disable software shutdown." );
CLIDict_Entry( ledTest, "Test out the led pages." );
CLIDict_Entry( ledZero, "Zero out LED register pages (non-configuration)." );
CLIDict_Def( ledCLIDict, "ISSI LED Module Commands" ) = {
CLIDict_Item( i2cRecv ),
CLIDict_Item( i2cSend ),
+ CLIDict_Item( ledPage ),
+ CLIDict_Item( ledStart ),
CLIDict_Item( ledTest ),
CLIDict_Item( ledZero ),
{ 0, 0, 0 } // Null entry for dictionary end
LED_Buffer LED_pageBuffer;
+/*
// A bit mask determining which LEDs are enabled in the ISSI chip
+// All channel mask example
// 0x00 -> 0x11
const uint8_t LED_ledEnableMask[] = {
0xE8, // I2C address
0xFF, 0xFF, // C8-1 -> C8-16
0xFF, 0xFF, // C9-1 -> C9-16
};
+*/
+
+/*
+// A bit mask determining which LEDs are enabled in the ISSI chip
+// Infinity ErgoDox full mask
+// 0x00 -> 0x11
+const uint8_t LED_ledEnableMask[] = {
+0xE8, // I2C address
+0x00, // Starting register address
+0xFC, 0xFC, // C1-1 -> C1-16
+0xFB, 0xFB, // C2-1 -> C2-16
+0xFF, 0xFF, // C3-1 -> C3-16
+0xFE, 0xFE, // C4-1 -> C4-16
+0x7F, 0x7F, // C5-1 -> C5-16
+0xFF, 0xFF, // C6-1 -> C6-16
+0xCF, 0xCF, // C7-1 -> C7-16
+0xC7, 0xC7, // C8-1 -> C8-16
+0x43, 0x43, // C9-1 -> C9-16
+};
+*/
+
+/*
+const uint8_t LED_ledEnableMask[] = {
+0xE8, // I2C address
+0x00, // Starting register address
+0x00, 0x00, // C1-1 -> C1-16
+//0xEC, 0xEC, // C1-1 -> C1-16
+0x00, 0x00, // C2-1 -> C2-16
+0x00, 0x00, // C3-1 -> C3-16
+0x00, 0x00, // C4-1 -> C4-16
+0x00, 0x00, // C5-1 -> C5-16
+0x00, 0x00, // C6-1 -> C6-16
+0x08, 0x08, // C7-1 -> C7-16
+0x00, 0x00, // C8-1 -> C8-16
+0x00, 0x00, // C9-1 -> C9-16
+};
+*/
+
+
+/*
+// XXX Pre-fill example of buffers
+const uint8_t examplePage[] = {
+0xE8, // I2C address
+0x24, // Starting register address
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C1-1 -> C1-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C2-1 -> C2-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C3-1 -> C3-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C4-1 -> C4-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C5-1 -> C5-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C6-1 -> C6-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C7-1 -> C7-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C8-1 -> C8-16
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, // C9-1 -> C9-16
+};
+*/
// XXX Pre-fill example of buffers
const uint8_t examplePage[] = {
I2C0_FLT = 4;
I2C0_C1 = I2C_C1_IICEN;
I2C0_C2 = I2C_C2_HDRS; // High drive select
-//},
// Enable I2C Interrupt
NVIC_ENABLE_IRQ( IRQ_I2C0 );
}
+void LED_readPage( uint8_t len, uint8_t page )
+{
+ // Page Setup
+ uint8_t pageSetup[] = { 0xE8, 0xFD, page };
+
+ // Setup page
+ while ( I2C_Send( pageSetup, sizeof( pageSetup ), 0 ) == 0 )
+ delay(1);
+
+ // Register Setup
+ uint8_t regSetup[] = { 0xE8, 0x00 };
+
+ // Setup starting register
+ while ( I2C_Send( regSetup, sizeof( regSetup ), 0 ) == 0 )
+ delay(1);
+
+ // Register Read Command
+ uint8_t regReadCmd[] = { 0xE9 };
+
+ // Read each register in the page
+ for ( uint8_t reg = 0; reg < len; reg++ )
+ {
+ // Request register data
+ while ( I2C_Send( regReadCmd, sizeof( regReadCmd ), 0 ) == 0 )
+ delay(1);
+ }
+}
+
void LED_writeReg( uint8_t reg, uint8_t val, uint8_t page )
{
// Page Setup
LED_zeroPages( 0x0B, 1, 0x00, 0x0C ); // Control Registers
// Disable Hardware shutdown of ISSI chip (pull high)
- GPIOD_PDDR |= (1<<1);
- PORTD_PCR1 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
- GPIOD_PSOR |= (1<<1);
+ GPIOB_PDDR |= (1<<16);
+ PORTB_PCR16 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
+ GPIOB_PSOR |= (1<<16);
// Clear LED Pages
LED_zeroPages( 0x00, 8, 0x00, 0xB4 ); // LED Registers
void I2C_BufferPush( uint8_t byte, I2C_Buffer *buffer )
{
+ dbug_msg("DATA: ");
+ printHex( byte );
+
// Make sure buffer isn't full
if ( buffer->tail + 1 == buffer->head || ( buffer->head > buffer->tail && buffer->tail + 1 - buffer->size == buffer->head ) )
{
I2C_Send( buffer, bufferLen, 1 ); // Only 1 byte is ever read at a time with the ISSI chip
}
+void cliFunc_ledPage( char* args )
+{
+ // Parse number from argument
+ // NOTE: Only first argument is used
+ char* arg1Ptr;
+ char* arg2Ptr;
+ CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
+
+ // Default to 0 if no argument is given
+ uint8_t page = 0;
+
+ if ( arg1Ptr[0] != '\0' )
+ {
+ page = (uint8_t)numToInt( arg1Ptr );
+ }
+
+ // No \r\n by default after the command is entered
+ print( NL );
+
+ LED_readPage( 0xB4, page );
+}
+
+void cliFunc_ledStart( char* args )
+{
+ print( NL ); // No \r\n by default after the command is entered
+ LED_zeroPages( 0x0B, 1, 0x00, 0x0C ); // Control Registers
+ //LED_zeroPages( 0x00, 8, 0x00, 0xB4 ); // LED Registers
+ LED_writeReg( 0x0A, 0x01, 0x0B );
+ LED_sendPage( (uint8_t*)LED_ledEnableMask, sizeof( LED_ledEnableMask ), 0 );
+
+}
+
void cliFunc_ledTest( char* args )
{
print( NL ); // No \r\n by default after the command is entered