Fixing compiler errors for usbMuxUart Output module

[kiibohd-controller.git] / Output / usbMuxUart / output_com.c

diff --git a/Output/usbMuxUart/output_com.c b/Output/usbMuxUart/output_com.c
index 5c883e7e982213199868751fdd155a718adb42cb..d33d7e0a64daddb2a5600805de041902f309e128 100644 (file)
--- a/Output/usbMuxUart/output_com.c
+++ b/Output/usbMuxUart/output_com.c
@@ -33,10 +33,10 @@
 // USB Includes
 #if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
 #elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_)
-#include <uartOut/arm/uart_serial.h>
-#include <pjrcUSB/arm/usb_dev.h>
-#include <pjrcUSB/arm/usb_keyboard.h>
-#include <pjrcUSB/arm/usb_serial.h>
+#include <arm/uart_serial.h>
+#include <arm/usb_dev.h>
+#include <arm/usb_keyboard.h>
+#include <arm/usb_serial.h>
 #endif
 
 // Local Includes
@@ -135,10 +135,69 @@ USBKeyChangeState USBKeys_Changed = USBKeyChangeState_None;
 // 0 is often used to show that a USB cable is not plugged in (but has power)
          uint8_t  Output_Available = 0;
 
+// Debug control variable for Output modules
+// 0 - Debug disabled (default)
+// 1 - Debug enabled
+         uint8_t  Output_DebugMode = 0;
+
 
 
 // ----- Capabilities -----
 
+// Set Boot Keyboard Protocol
+void Output_kbdProtocolBoot_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+       // Display capability name
+       if ( stateType == 0xFF && state == 0xFF )
+       {
+               print("Output_kbdProtocolBoot()");
+               return;
+       }
+
+       // Only set if necessary
+       if ( USBKeys_Protocol == 0 )
+               return;
+
+       // TODO Analog inputs
+       // Only set on key press
+       if ( stateType != 0x01 )
+               return;
+
+       // Flush the key buffers
+       Output_flushBuffers();
+
+       // Set the keyboard protocol to Boot Mode
+       USBKeys_Protocol = 0;
+}
+
+
+// Set NKRO Keyboard Protocol
+void Output_kbdProtocolNKRO_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+       // Display capability name
+       if ( stateType == 0xFF && state == 0xFF )
+       {
+               print("Output_kbdProtocolNKRO()");
+               return;
+       }
+
+       // Only set if necessary
+       if ( USBKeys_Protocol == 1 )
+               return;
+
+       // TODO Analog inputs
+       // Only set on key press
+       if ( stateType != 0x01 )
+               return;
+
+       // Flush the key buffers
+       Output_flushBuffers();
+
+       // Set the keyboard protocol to NKRO Mode
+       USBKeys_Protocol = 1;
+}
+
+
 // Sends a Consumer Control code to the USB Output buffer
 void Output_consCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
 {
@@ -374,6 +433,20 @@ void Output_usbCodeSend_capability( uint8_t state, uint8_t stateType, uint8_t *a
 
 // ----- Functions -----
 
+// Flush Key buffers
+void Output_flushBuffers()
+{
+       // Zero out USBKeys_Keys array
+       for ( uint8_t c = 0; c < USB_NKRO_BITFIELD_SIZE_KEYS; c++ )
+               USBKeys_Keys[ c ] = 0;
+
+       // Zero out other key buffers
+       USBKeys_ConsCtrl = 0;
+       USBKeys_Modifiers = 0;
+       USBKeys_SysCtrl = 0;
+}
+
+
 // USB Module Setup
 inline void Output_setup()
 {