-/* Copyright (C) 2011-2014 by Jacob Alexander
+/* Copyright (C) 2011-2015 by Jacob Alexander
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
// USB Includes
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_)
#include "avr/usb_keyboard_serial.h"
-#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_)
+#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_)
#include "arm/usb_dev.h"
#include "arm/usb_keyboard.h"
#include "arm/usb_serial.h"
// ----- Function Declarations -----
void cliFunc_kbdProtocol( char* args );
+void cliFunc_outputDebug( char* args );
void cliFunc_readLEDs ( char* args );
void cliFunc_sendKeys ( char* args );
void cliFunc_setKeys ( char* args );
// Output Module command dictionary
CLIDict_Entry( kbdProtocol, "Keyboard Protocol Mode: 0 - Boot, 1 - OS/NKRO Mode" );
+CLIDict_Entry( outputDebug, "Toggle Output Debug mode." );
CLIDict_Entry( readLEDs, "Read LED byte:" NL "\t\t1 NumLck, 2 CapsLck, 4 ScrlLck, 16 Kana, etc." );
CLIDict_Entry( sendKeys, "Send the prepared list of USB codes and modifier byte." );
CLIDict_Entry( setKeys, "Prepare a space separated list of USB codes (decimal). Waits until \033[35msendKeys\033[0m." );
CLIDict_Def( outputCLIDict, "USB Module Commands" ) = {
CLIDict_Item( kbdProtocol ),
+ CLIDict_Item( outputDebug ),
CLIDict_Item( readLEDs ),
CLIDict_Item( sendKeys ),
CLIDict_Item( setKeys ),
// Which modifier keys are currently pressed
// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui
// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
- uint8_t USBKeys_Modifiers = 0;
- uint8_t USBKeys_ModifiersCLI = 0; // Separate CLI send buffer
+uint8_t USBKeys_Modifiers = 0;
+uint8_t USBKeys_ModifiersCLI = 0; // Separate CLI send buffer
// Currently pressed keys, max is defined by USB_MAX_KEY_SEND
- uint8_t USBKeys_Keys [USB_NKRO_BITFIELD_SIZE_KEYS];
- uint8_t USBKeys_KeysCLI[USB_NKRO_BITFIELD_SIZE_KEYS]; // Separate CLI send buffer
+uint8_t USBKeys_Keys [USB_NKRO_BITFIELD_SIZE_KEYS];
+uint8_t USBKeys_KeysCLI[USB_NKRO_BITFIELD_SIZE_KEYS]; // Separate CLI send buffer
// System Control and Consumer Control 1KRO containers
- uint8_t USBKeys_SysCtrl;
- uint16_t USBKeys_ConsCtrl;
+uint8_t USBKeys_SysCtrl;
+uint16_t USBKeys_ConsCtrl;
// The number of keys sent to the usb in the array
- uint8_t USBKeys_Sent = 0;
- uint8_t USBKeys_SentCLI = 0;
+uint8_t USBKeys_Sent = 0;
+uint8_t USBKeys_SentCLI = 0;
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
volatile uint8_t USBKeys_LEDs = 0;
// the idle configuration, how often we send the report to the
// host (ms * 4) even when it hasn't changed
- uint8_t USBKeys_Idle_Config = 125;
+uint8_t USBKeys_Idle_Config = 125;
// count until idle timeout
- uint8_t USBKeys_Idle_Count = 0;
+uint8_t USBKeys_Idle_Count = 0;
+
+// Indicates whether the Output module is fully functional
+// 0 - Not fully functional, 1 - Fully functional
+// 0 is often used to show that a USB cable is not plugged in (but has power)
+volatile uint8_t Output_Available = 0;
+
+// Debug control variable for Output modules
+// 0 - Debug disabled (default)
+// 1 - Debug enabled
+uint8_t Output_DebugMode = 0;
// Only send keypresses if press or hold state
if ( stateType == 0x00 && state == 0x03 ) // Release state
+ {
+ USBKeys_ConsCtrl = 0;
return;
+ }
// Set consumer control code
USBKeys_ConsCtrl = *(uint16_t*)(&args[0]);
}
+// Ignores the given key status update
+// Used to prevent fall-through, this is the None keyword in KLL
+void Output_noneSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Output_noneSend()");
+ return;
+ }
+
+ // Nothing to do, because that's the point :P
+}
+
+
// Sends a System Control code to the USB Output buffer
void Output_sysCtrlSend_capability( uint8_t state, uint8_t stateType, uint8_t *args )
{
// Only send keypresses if press or hold state
if ( stateType == 0x00 && state == 0x03 ) // Release state
+ {
+ USBKeys_SysCtrl = 0;
return;
+ }
// Set system control code
USBKeys_SysCtrl = args[0];
// It is used to send "nothing" in order to break up sequences of USB Codes
else if ( key == 0x00 )
{
- USBKeys_Changed |= USBKeyChangeState_All;
+ USBKeys_Changed |= USBKeyChangeState_MainKeys;
// Also flush out buffers just in case
Output_flushBuffers();
}
}
+void Output_flashMode_capability( uint8_t state, uint8_t stateType, uint8_t *args )
+{
+ // Display capability name
+ if ( stateType == 0xFF && state == 0xFF )
+ {
+ print("Output_flashMode(usbCode)");
+ return;
+ }
+
+ // Start flash mode
+ Output_firmwareReload();
+}
+
// ----- Functions -----
// USB Module Setup
inline void Output_setup()
{
- // Initialize the USB, and then wait for the host to set configuration.
- // This will hang forever if USB does not initialize
+ // Initialize the USB
+ // If a USB connection does not exist, just ignore it
+ // All usb related functions will non-fatally fail if called
+ // If the USB initialization is delayed, then functionality will just be delayed
usb_init();
- while ( !usb_configured() );
-
// Register USB Output CLI dictionary
CLI_registerDictionary( outputCLIDict, outputCLIDictName );
while ( USBKeys_Changed )
usb_keyboard_send();
- // Clear modifiers and keys
- USBKeys_Modifiers = 0;
- USBKeys_Sent = 0;
+ // Clear keys sent
+ USBKeys_Sent = 0;
// Signal Scan Module we are finished
switch ( USBKeys_Protocol )
{
case 0: // Boot Mode
+ // Clear modifiers only in boot mode
+ USBKeys_Modifiers = 0;
Scan_finishedWithOutput( USBKeys_Sent <= USB_BOOT_MAX_KEYS ? USBKeys_Sent : USB_BOOT_MAX_KEYS );
break;
case 1: // NKRO Mode
{
#if defined(_at90usb162_) || defined(_atmega32u4_) || defined(_at90usb646_) || defined(_at90usb1286_) // AVR
uint16_t count = 0;
-#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) // ARM
+#elif defined(_mk20dx128_) || defined(_mk20dx128vlf5_) || defined(_mk20dx256_) || defined(_mk20dx256vlh7_) // ARM
uint32_t count = 0;
#endif
// Count characters until NULL character, then send the amount counted
}
+void cliFunc_outputDebug( char* args )
+{
+ // Parse number from argument
+ // NOTE: Only first argument is used
+ char* arg1Ptr;
+ char* arg2Ptr;
+ CLI_argumentIsolation( args, &arg1Ptr, &arg2Ptr );
+
+ // Default to 1 if no argument is given
+ Output_DebugMode = 1;
+
+ if ( arg1Ptr[0] != '\0' )
+ {
+ Output_DebugMode = (uint16_t)numToInt( arg1Ptr );
+ }
+}
+
+
void cliFunc_readLEDs( char* args )
{
print( NL );
projects / kiibohd-controller.git / blobdiff