// Project Includes
#include <Lib/OutputLib.h>
#include <print.h>
+#include <kll_defs.h>
// Local Includes
#include "usb_dev.h"
static void endpoint0_stall()
{
+ #ifdef UART_DEBUG_UNKNOWN
+ print("STALL" NL );
+ #endif
USB0_ENDPT0 = USB_ENDPT_EPSTALL | USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
}
switch ( setup.wRequestAndType )
{
case 0x0500: // SET_ADDRESS
- break;
+ goto send;
+
case 0x0900: // SET_CONFIGURATION
#ifdef UART_DEBUG
print("CONFIGURE - ");
table[ index( i, TX, EVEN ) ].desc = 0;
table[ index( i, TX, ODD ) ].desc = 0;
}
- break;
+ goto send;
+
case 0x0880: // GET_CONFIGURATION
reply_buffer[0] = usb_configuration;
datalen = 1;
data = reply_buffer;
- break;
+ goto send;
+
case 0x0080: // GET_STATUS (device)
reply_buffer[0] = 0;
reply_buffer[1] = 0;
datalen = 2;
data = reply_buffer;
- break;
+ goto send;
+
case 0x0082: // GET_STATUS (endpoint)
if ( setup.wIndex > NUM_ENDPOINTS )
{
reply_buffer[0] = 1;
data = reply_buffer;
datalen = 2;
- break;
+ goto send;
+
case 0x0100: // CLEAR_FEATURE (device)
case 0x0101: // CLEAR_FEATURE (interface)
// TODO: Currently ignoring, perhaps useful? -HaaTa
+ warn_print("CLEAR_FEATURE - Device/Interface");
endpoint0_stall();
return;
- case 0x0102: // CLEAR_FEATURE (interface)
+
+ case 0x0102: // CLEAR_FEATURE (endpoint)
i = setup.wIndex & 0x7F;
if ( i > NUM_ENDPOINTS || setup.wValue != 0 )
{
endpoint0_stall();
return;
}
- //(*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) &= ~0x02;
+ (*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) &= ~0x02;
// TODO: do we need to clear the data toggle here?
- //break;
+ goto send;
- // FIXME: Clearing causes keyboard to freeze, likely an invalid clear
- // XXX: Ignoring seems to work, though this may not be the ideal behaviour -HaaTa
- endpoint0_stall();
- return;
case 0x0300: // SET_FEATURE (device)
case 0x0301: // SET_FEATURE (interface)
// TODO: Currently ignoring, perhaps useful? -HaaTa
+ warn_print("SET_FEATURE - Device/Interface");
endpoint0_stall();
return;
+
case 0x0302: // SET_FEATURE (endpoint)
i = setup.wIndex & 0x7F;
if ( i > NUM_ENDPOINTS || setup.wValue != 0 )
}
(*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) |= 0x02;
// TODO: do we need to clear the data toggle here?
- break;
+ goto send;
+
case 0x0680: // GET_DESCRIPTOR
case 0x0681:
#ifdef UART_DEBUG
case 0x2221: // CDC_SET_CONTROL_LINE_STATE
usb_cdc_line_rtsdtr = setup.wValue;
//serial_print("set control line state\n");
- endpoint0_stall();
- return;
+ goto send;
case 0x21A1: // CDC_GET_LINE_CODING
data = (uint8_t*)usb_cdc_line_coding;
case 0x2021: // CDC_SET_LINE_CODING
// XXX Needed?
//serial_print("set coding, waiting...\n");
- endpoint0_stall();
- return; // Cannot stall here (causes issues)
+ return;
case 0x0921: // HID SET_REPORT
- #ifdef UART_DEBUG
- print("SET_REPORT - ");
- printHex( setup.wValue );
- print(" - ");
- printHex( setup.wValue & 0xFF );
- print( NL );
- #endif
- USBKeys_LEDs = setup.wValue & 0xFF;
- endpoint0_stall();
+ // Interface
+ switch ( setup.wIndex & 0xFF )
+ {
+ // Keyboard Interface
+ case KEYBOARD_INTERFACE:
+ break;
+ // NKRO Keyboard Interface
+ case NKRO_KEYBOARD_INTERFACE:
+ break;
+ default:
+ warn_msg("Unknown interface - ");
+ printHex( setup.wIndex );
+ print( NL );
+ endpoint0_stall();
+ break;
+ }
+
return;
case 0x01A1: // HID GET_REPORT
#ifdef UART_DEBUG
print("GET_REPORT - ");
- printHex( USBKeys_LEDs );
+ printHex( setup.wIndex );
print(NL);
#endif
- data = (uint8_t*)&USBKeys_LEDs;
- datalen = 1;
- goto send;
+ // Search through descriptors returning necessary info
+ for ( list = usb_descriptor_list; 1; list++ )
+ {
+ if ( list->addr == NULL )
+ break;
+ if ( list->wValue != 0x2200 )
+ continue;
+ if ( setup.wIndex == list->wIndex )
+ {
+ data = list->addr;
+ datalen = list->length;
+ goto send;
+ }
+ }
+ endpoint0_stall();
+ return;
case 0x0A21: // HID SET_IDLE
#ifdef UART_DEBUG
#endif
USBKeys_Idle_Config = (setup.wValue >> 8);
USBKeys_Idle_Count = 0;
- endpoint0_stall();
- return;
+ goto send;
case 0x0B21: // HID SET_PROTOCOL
#ifdef UART_DEBUG
print(NL);
#endif
USBKeys_Protocol = setup.wValue & 0xFF; // 0 - Boot Mode, 1 - NKRO Mode
- endpoint0_stall();
- return;
+ goto send;
// case 0xC940:
default:
send:
#ifdef UART_DEBUG
print("setup send ");
- printHex32((uint32_t)data);
+ printHex32( (uint32_t)data );
+ print(",");
+ for ( uint8_t c = 0; c < datalen; c++ )
+ {
+ printHex( data[c] );
+ print(" ");
+ }
print(",");
- printHex(datalen);
- print(NL);
+ printHex( datalen );
+ print( NL );
#endif
if ( datalen > setup.wLength )
printHex(setup.wIndex);
print(", len:");
printHex(setup.wLength);
+ print(" -- ");
+ printHex32(setup.word1);
+ print(" ");
+ printHex32(setup.word2);
print(NL);
#endif
// actually "do" the setup request
// unfreeze the USB, now that we're ready
USB0_CTL = USB_CTL_USBENSOFEN; // clear TXSUSPENDTOKENBUSY bit
break;
+
case 0x01: // OUT transaction received from host
case 0x02:
- #ifdef UART_DEBUG
- print("PID=OUT"NL);
+ #ifdef UART_DEBUG_UNKNOWN
+ print("PID=OUT wRequestAndType:");
+ printHex(setup.wRequestAndType);
+ print(", wValue:");
+ printHex(setup.wValue);
+ print(", wIndex:");
+ printHex(setup.wIndex);
+ print(", len:");
+ printHex(setup.wLength);
+ print(" -- ");
+ printHex32(setup.word1);
+ print(" ");
+ printHex32(setup.word2);
+ print(NL);
#endif
+
// CDC Interface
if ( setup.wRequestAndType == 0x2021 /*CDC_SET_LINE_CODING*/ )
{
endpoint0_transmit( NULL, 0 );
}
- // Keyboard Interface
- if ( setup.word1 == 0x02000921 && setup.word2 == ( (1<<16) | KEYBOARD_INTERFACE ) )
- {
- USBKeys_LEDs = buf[0];
- endpoint0_transmit( NULL, 0 );
- }
- // NKRO Keyboard Interface
- if ( setup.word1 == 0x02000921 && setup.word2 == ( (1<<16) | NKRO_KEYBOARD_INTERFACE ) )
+ // Keyboard SET_REPORT
+ if ( setup.wRequestAndType == 0x921 && setup.wValue & 0x200 )
{
- USBKeys_LEDs = buf[0];
- endpoint0_transmit( NULL, 0 );
+ // Interface
+ switch ( setup.wIndex & 0xFF )
+ {
+ // Keyboard Interface
+ case KEYBOARD_INTERFACE:
+ USBKeys_LEDs = buf[0];
+ endpoint0_transmit( NULL, 0 );
+ break;
+ // NKRO Keyboard Interface
+ case NKRO_KEYBOARD_INTERFACE:
+ // Only use 2nd byte, first byte is the report id
+ USBKeys_LEDs = buf[1];
+ endpoint0_transmit( NULL, 0 );
+ break;
+ default:
+ warn_msg("Unknown interface - ");
+ printHex( setup.wIndex );
+ print( NL );
+ break;
+ }
+
+ #ifdef UART_DEBUG
+ for ( size_t len = 0; len < setup.wLength; len++ )
+ {
+ printHex( buf[ len ] );
+ print(" ");
+ }
+ print( NL );
+ #endif
}
// give the buffer back
}
break;
+
default:
#ifdef UART_DEBUG
print("PID=unknown:");
void usb_device_reload()
{
+ if ( flashModeEnabled_define == 0 )
+ {
+ print( NL );
+ warn_print("flashModeEnabled not set, cancelling firmware reload...");
+ info_msg("Set flashModeEnabled to 1 in your kll configuration.");
+ return;
+ }
+
// MCHCK
#if defined(_mk20dx128vlf5_)
PORTA_PCR3 = PORT_PCR_PFE | PORT_PCR_MUX(1); // Internal pull-up
// Check for jumper
- if ( GPIOA_PDIR & (1<<3) )
+ if ( GPIOA_PDIR & (1<<3) && flashModeEnabled_define != 0 )
{
print( NL );
warn_print("Security jumper not present, cancelling firmware reload...");
break;
default:
tx_state[ endpoint ] = ((uint32_t)b & 8)
- ? TX_STATE_ODD_FREE
- : TX_STATE_EVEN_FREE;
+ ? TX_STATE_ODD_FREE
+ : TX_STATE_EVEN_FREE;
break;
}
}