static void endpoint0_stall()
{
+ #ifdef UART_DEBUG_UNKNOWN
+ print("STALL" NL );
+ #endif
USB0_ENDPT0 = USB_ENDPT_EPSTALL | USB_ENDPT_EPRXEN | USB_ENDPT_EPTXEN | USB_ENDPT_EPHSHK;
}
switch ( setup.wRequestAndType )
{
case 0x0500: // SET_ADDRESS
- break;
+ goto send;
+
case 0x0900: // SET_CONFIGURATION
#ifdef UART_DEBUG
print("CONFIGURE - ");
table[ index( i, TX, EVEN ) ].desc = 0;
table[ index( i, TX, ODD ) ].desc = 0;
}
- break;
+ goto send;
+
case 0x0880: // GET_CONFIGURATION
reply_buffer[0] = usb_configuration;
datalen = 1;
data = reply_buffer;
- break;
+ goto send;
+
case 0x0080: // GET_STATUS (device)
reply_buffer[0] = 0;
reply_buffer[1] = 0;
datalen = 2;
data = reply_buffer;
- break;
+ goto send;
+
case 0x0082: // GET_STATUS (endpoint)
if ( setup.wIndex > NUM_ENDPOINTS )
{
reply_buffer[0] = 1;
data = reply_buffer;
datalen = 2;
- break;
+ goto send;
+
case 0x0100: // CLEAR_FEATURE (device)
case 0x0101: // CLEAR_FEATURE (interface)
// TODO: Currently ignoring, perhaps useful? -HaaTa
+ warn_print("CLEAR_FEATURE - Device/Interface");
endpoint0_stall();
return;
+
case 0x0102: // CLEAR_FEATURE (interface)
i = setup.wIndex & 0x7F;
if ( i > NUM_ENDPOINTS || setup.wValue != 0 )
endpoint0_stall();
return;
}
+ warn_print("CLEAR_FEATURE - Interface");
//(*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) &= ~0x02;
// TODO: do we need to clear the data toggle here?
//break;
// XXX: Ignoring seems to work, though this may not be the ideal behaviour -HaaTa
endpoint0_stall();
return;
+
case 0x0300: // SET_FEATURE (device)
case 0x0301: // SET_FEATURE (interface)
// TODO: Currently ignoring, perhaps useful? -HaaTa
+ warn_print("SET_FEATURE");
endpoint0_stall();
return;
+
case 0x0302: // SET_FEATURE (endpoint)
i = setup.wIndex & 0x7F;
if ( i > NUM_ENDPOINTS || setup.wValue != 0 )
}
(*(uint8_t *)(&USB0_ENDPT0 + setup.wIndex * 4)) |= 0x02;
// TODO: do we need to clear the data toggle here?
- break;
+ goto send;
+
case 0x0680: // GET_DESCRIPTOR
case 0x0681:
#ifdef UART_DEBUG
case 0x2221: // CDC_SET_CONTROL_LINE_STATE
usb_cdc_line_rtsdtr = setup.wValue;
//serial_print("set control line state\n");
- endpoint0_stall();
- return;
+ goto send;
case 0x21A1: // CDC_GET_LINE_CODING
data = (uint8_t*)usb_cdc_line_coding;
case 0x2021: // CDC_SET_LINE_CODING
// XXX Needed?
//serial_print("set coding, waiting...\n");
- endpoint0_stall();
- return; // Cannot stall here (causes issues)
+ return;
case 0x0921: // HID SET_REPORT
#ifdef UART_DEBUG
- print("SET_REPORT - ");
+ warn_msg("SET_REPORT - ");
printHex( setup.wValue );
print(" - ");
printHex( setup.wValue & 0xFF );
print( NL );
#endif
USBKeys_LEDs = setup.wValue & 0xFF;
+
+ // Must be stall for some reason... -HaaTa
endpoint0_stall();
return;
case 0x01A1: // HID GET_REPORT
#ifdef UART_DEBUG
print("GET_REPORT - ");
- printHex( USBKeys_LEDs );
+ printHex( setup.wIndex );
print(NL);
#endif
- data = (uint8_t*)&USBKeys_LEDs;
- datalen = 1;
- goto send;
+ // Search through descriptors returning necessary info
+ for ( list = usb_descriptor_list; 1; list++ )
+ {
+ if ( list->addr == NULL )
+ break;
+ if ( list->wValue != 0x2200 )
+ continue;
+ if ( setup.wIndex == list->wIndex )
+ {
+ data = list->addr;
+ datalen = list->length;
+ goto send;
+ }
+ }
+ endpoint0_stall();
+ return;
case 0x0A21: // HID SET_IDLE
#ifdef UART_DEBUG
#endif
USBKeys_Idle_Config = (setup.wValue >> 8);
USBKeys_Idle_Count = 0;
- endpoint0_stall();
- return;
+ goto send;
case 0x0B21: // HID SET_PROTOCOL
#ifdef UART_DEBUG
print(NL);
#endif
USBKeys_Protocol = setup.wValue & 0xFF; // 0 - Boot Mode, 1 - NKRO Mode
- endpoint0_stall();
- return;
+ goto send;
// case 0xC940:
default:
send:
#ifdef UART_DEBUG
print("setup send ");
- printHex32((uint32_t)data);
+ printHex32( (uint32_t)data );
print(",");
- printHex(datalen);
- print(NL);
+ for ( uint8_t c = 0; c < datalen; c++ )
+ {
+ printHex( data[c] );
+ print(" ");
+ }
+ print(",");
+ printHex( datalen );
+ print( NL );
#endif
if ( datalen > setup.wLength )
// unfreeze the USB, now that we're ready
USB0_CTL = USB_CTL_USBENSOFEN; // clear TXSUSPENDTOKENBUSY bit
break;
+
case 0x01: // OUT transaction received from host
case 0x02:
#ifdef UART_DEBUG
}
break;
+
default:
#ifdef UART_DEBUG
print("PID=unknown:");