-/* Copyright (C) 2014 by Jacob Alexander
+/* Copyright (C) 2014-2015 by Jacob Alexander
*
* This file is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
void cliFunc_keyHold ( char* args );
void cliFunc_keyPress ( char* args );
void cliFunc_keyRelease( char* args );
+void cliFunc_layerDebug( char* args );
void cliFunc_layerList ( char* args );
void cliFunc_layerState( char* args );
void cliFunc_macroDebug( char* args );
// ----- Variables -----
// Macro Module command dictionary
-const char macroCLIDictName[] = "Macro Module Commands";
-const CLIDictItem macroCLIDict[] = {
- { "capList", "Prints an indexed list of all non USB keycode capabilities.", cliFunc_capList },
- { "capSelect", "Triggers the specified capabilities. First two args are state and stateType." NL "\t\t\033[35mK11\033[0m Keyboard Capability 0x0B", cliFunc_capSelect },
- { "keyHold", "Send key-hold events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyHold },
- { "keyPress", "Send key-press events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyPress },
- { "keyRelease", "Send key-release event to macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A", cliFunc_keyRelease },
- { "layerList", "List available layers.", cliFunc_layerList },
- { "layerState", "Modify specified indexed layer state <layer> <state byte>." NL "\t\t\033[35mL2\033[0m Indexed Layer 0x02" NL "\t\t0 Off, 1 Shift, 2 Latch, 4 Lock States", cliFunc_layerState },
- { "macroDebug", "Disables/Enables sending USB keycodes to the Output Module and prints U/K codes.", cliFunc_macroDebug },
- { "macroList", "List the defined trigger and result macros.", cliFunc_macroList },
- { "macroProc", "Pause/Resume macro processing.", cliFunc_macroProc },
- { "macroShow", "Show the macro corresponding to the given index." NL "\t\t\033[35mT16\033[0m Indexed Trigger Macro 0x10, \033[35mR12\033[0m Indexed Result Macro 0x0C", cliFunc_macroShow },
- { "macroStep", "Do N macro processing steps. Defaults to 1.", cliFunc_macroStep },
+CLIDict_Entry( capList, "Prints an indexed list of all non USB keycode capabilities." );
+CLIDict_Entry( capSelect, "Triggers the specified capabilities. First two args are state and stateType." NL "\t\t\033[35mK11\033[0m Keyboard Capability 0x0B" );
+CLIDict_Entry( keyHold, "Send key-hold events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A" );
+CLIDict_Entry( keyPress, "Send key-press events to the macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A" );
+CLIDict_Entry( keyRelease, "Send key-release event to macro module. Duplicates have undefined behaviour." NL "\t\t\033[35mS10\033[0m Scancode 0x0A" );
+CLIDict_Entry( layerDebug, "Layer debug mode. Shows layer stack and any changes." );
+CLIDict_Entry( layerList, "List available layers." );
+CLIDict_Entry( layerState, "Modify specified indexed layer state <layer> <state byte>." NL "\t\t\033[35mL2\033[0m Indexed Layer 0x02" NL "\t\t0 Off, 1 Shift, 2 Latch, 4 Lock States" );
+CLIDict_Entry( macroDebug, "Disables/Enables sending USB keycodes to the Output Module and prints U/K codes." );
+CLIDict_Entry( macroList, "List the defined trigger and result macros." );
+CLIDict_Entry( macroProc, "Pause/Resume macro processing." );
+CLIDict_Entry( macroShow, "Show the macro corresponding to the given index." NL "\t\t\033[35mT16\033[0m Indexed Trigger Macro 0x10, \033[35mR12\033[0m Indexed Result Macro 0x0C" );
+CLIDict_Entry( macroStep, "Do N macro processing steps. Defaults to 1." );
+
+CLIDict_Def( macroCLIDict, "Macro Module Commands" ) = {
+ CLIDict_Item( capList ),
+ CLIDict_Item( capSelect ),
+ CLIDict_Item( keyHold ),
+ CLIDict_Item( keyPress ),
+ CLIDict_Item( keyRelease ),
+ CLIDict_Item( layerDebug ),
+ CLIDict_Item( layerList ),
+ CLIDict_Item( layerState ),
+ CLIDict_Item( macroDebug ),
+ CLIDict_Item( macroList ),
+ CLIDict_Item( macroProc ),
+ CLIDict_Item( macroShow ),
+ CLIDict_Item( macroStep ),
{ 0, 0, 0 } // Null entry for dictionary end
};
+// Layer debug flag - If set, displays any changes to layers and the full layer stack on change
+uint8_t layerDebugMode = 0;
+
// Macro debug flag - If set, clears the USB Buffers after signalling processing completion
uint8_t macroDebugMode = 0;
uint16_t macroStepCounter = 0;
-// Key Trigger List Buffer
+// Key Trigger List Buffer and Layer Cache
+// The layer cache is set on press only, hold and release events refer to the value set on press
TriggerGuide macroTriggerListBuffer[ MaxScanCode ];
uint8_t macroTriggerListBufferSize = 0;
+var_uint_t macroTriggerListLayerCache[ MaxScanCode ];
// Pending Trigger Macro Index List
// * Any trigger macros that need processing from a previous macro processing loop
// Sets the given layer with the specified layerState
void Macro_layerState( uint8_t state, uint8_t stateType, uint16_t layer, uint8_t layerState )
{
+ // Ignore if layer does not exist
+ if ( layer >= LayerNum )
+ return;
+
// Is layer in the LayerIndexStack?
uint8_t inLayerIndexStack = 0;
uint16_t stackItem = 0;
// Reduce LayerIndexStack size
macroLayerIndexStackSize--;
}
+
+ // Layer Debug Mode
+ if ( layerDebugMode )
+ {
+ dbug_msg("Layer ");
+
+ // Iterate over each of the layers displaying the state as a hex value
+ for ( uint16_t index = 0; index < LayerNum; index++ )
+ {
+ printHex_op( LayerState[ index ], 0 );
+ }
+
+ // Always show the default layer (it's always 0)
+ print(" 0");
+
+ // Iterate over the layer stack starting from the bottom of the stack
+ for ( uint16_t index = macroLayerIndexStackSize; index > 0; index-- )
+ {
+ print(":");
+ printHex_op( macroLayerIndexStack[ index - 1 ], 0 );
+ }
+
+ print( NL );
+ }
}
// Modifies the specified Layer control byte
// Only use capability on press
// TODO Analog
- // XXX To make sense, this code be on press or release. Or it could even be a sticky shift (why? dunno) -HaaTa
- if ( stateType == 0x00 && state != 0x01 ) // All normal key conditions except press
+ if ( stateType == 0x00 && state != 0x03 ) // Only on release
return;
// Get layer index from arguments
// Looks up the trigger list for the given scan code (from the active layer)
// NOTE: Calling function must handle the NULL pointer case
-nat_ptr_t *Macro_layerLookup( uint8_t scanCode )
+nat_ptr_t *Macro_layerLookup( TriggerGuide *guide, uint8_t latch_expire )
{
+ uint8_t scanCode = guide->scanCode;
+
+ // TODO Analog
+ // If a normal key, and not pressed, do a layer cache lookup
+ if ( guide->type == 0x00 && guide->state != 0x01 )
+ {
+ // Cached layer
+ var_uint_t cachedLayer = macroTriggerListLayerCache[ scanCode ];
+
+ // Lookup map, then layer
+ nat_ptr_t **map = (nat_ptr_t**)LayerIndex[ cachedLayer ].triggerMap;
+ const Layer *layer = &LayerIndex[ cachedLayer ];
+
+ return map[ scanCode - layer->first ];
+ }
+
// If no trigger macro is defined at the given layer, fallthrough to the next layer
for ( uint16_t layerIndex = 0; layerIndex < macroLayerIndexStackSize; layerIndex++ )
{
// Check if latch has been pressed for this layer
// XXX Regardless of whether a key is found, the latch is removed on first lookup
- uint8_t latch = LayerState[ layerIndex ] & 0x02;
- if ( latch )
+ uint8_t latch = LayerState[ macroLayerIndexStack[ layerIndex ] ] & 0x02;
+ if ( latch && latch_expire )
{
- LayerState[ layerIndex ] &= ~0x02;
+ Macro_layerState( 0, 0, macroLayerIndexStack[ layerIndex ], 0x02 );
}
// Only use layer, if state is valid
&& scanCode >= layer->first
&& *map[ scanCode - layer->first ] != 0 )
{
+ // Set the layer cache
+ macroTriggerListLayerCache[ scanCode ] = macroLayerIndexStack[ layerIndex ];
+
return map[ scanCode - layer->first ];
}
}
&& scanCode >= layer->first
&& *map[ scanCode - layer->first ] != 0 )
{
+ // Set the layer cache to default map
+ macroTriggerListLayerCache[ scanCode ] = 0;
+
return map[ scanCode - layer->first ];
}
}
+// Update the scancode using a list of TriggerGuides
+// TODO Handle led state and analog
+inline void Macro_triggerState( void *triggers, uint8_t num )
+{
+ // Copy each of the TriggerGuides to the TriggerListBuffer
+ for ( uint8_t c = 0; c < num; c++ )
+ macroTriggerListBuffer[ macroTriggerListBufferSize++ ] = ((TriggerGuide*)triggers)[ c ];
+}
+
+
// Update the scancode key state
// States:
// * 0x00 - Off
// Evaluate/Update TriggerMacro
-inline TriggerMacroEval Macro_evalTriggerMacro( var_uint_t triggerMacroIndex )
+TriggerMacroEval Macro_evalTriggerMacro( var_uint_t triggerMacroIndex )
{
// Lookup TriggerMacro
const TriggerMacro *macro = &TriggerMacroList[ triggerMacroIndex ];
if ( macroTriggerListBuffer[ key ].state == 0x00 && macroTriggerListBuffer[ key ].state != 0x01 )
continue;
+ // TODO Analog
+ // If this is a release case, indicate to layer lookup for possible latch expiry
+ uint8_t latch_expire = macroTriggerListBuffer[ key ].state == 0x03;
+
// Lookup Trigger List
- nat_ptr_t *triggerList = Macro_layerLookup( macroTriggerListBuffer[ key ].scanCode );
+ nat_ptr_t *triggerList = Macro_layerLookup( ¯oTriggerListBuffer[ key ], latch_expire );
// Number of Triggers in list
nat_ptr_t triggerListSize = triggerList[0];
void cliFunc_capList( char* args )
{
print( NL );
- info_msg("Capabilities List");
+ info_msg("Capabilities List ");
printHex( CapabilitiesNum );
// Iterate through all of the capabilities and display them
}
}
+void cliFunc_layerDebug( char *args )
+{
+ // Toggle layer debug mode
+ layerDebugMode = layerDebugMode ? 0 : 1;
+
+ print( NL );
+ info_msg("Layer Debug Mode: ");
+ printInt8( layerDebugMode );
+}
+
void cliFunc_layerList( char* args )
{
print( NL );
projects / kiibohd-controller.git / blobdiff