uint16_t macroResultMacroPendingList[ ResultMacroNum ] = { 0 };
uint16_t macroResultMacroPendingListSize = 0;
+// Interconnect ScanCode Cache
+#if defined(ConnectEnabled_define)
+// TODO This can be shrunk by the size of the max node 0 ScanCode
+TriggerGuide macroInterconnectCache[ MaxScanCode ];
+uint8_t macroInterconnectCacheSize = 0;
+#endif
+
// ----- Capabilities -----
}
// If no trigger macro is defined at the given layer, fallthrough to the next layer
- for ( uint16_t layerIndex = 0; layerIndex < macroLayerIndexStackSize; layerIndex++ )
+ for ( uint16_t layerIndex = macroLayerIndexStackSize; layerIndex != 0xFFFF; layerIndex-- )
{
// Lookup Layer
const Layer *layer = &LayerIndex[ macroLayerIndexStack[ layerIndex ] ];
// Otherwise no defined Trigger Macro
erro_msg("Scan Code has no defined Trigger Macro: ");
printHex( scanCode );
+ print( NL );
return 0;
}
-// Update the scancode using a list of TriggerGuides
-// TODO Handle led state and analog
-inline void Macro_triggerState( void *triggers, uint8_t num )
+// Add an interconnect ScanCode
+// These are handled differently (less information is sent, hold/off states must be assumed)
+#if defined(ConnectEnabled_define)
+inline void Macro_interconnectAdd( void *trigger_ptr )
{
- // Copy each of the TriggerGuides to the TriggerListBuffer
- for ( uint8_t c = 0; c < num; c++ )
- macroTriggerListBuffer[ macroTriggerListBufferSize++ ] = ((TriggerGuide*)triggers)[ c ];
+ TriggerGuide *trigger = (TriggerGuide*)trigger_ptr;
+
+ // Error checking
+ uint8_t error = 0;
+ switch ( trigger->type )
+ {
+ case 0x00: // Normal key
+ switch ( trigger->state )
+ {
+ case 0x00:
+ case 0x01:
+ case 0x02:
+ case 0x03:
+ break;
+ default:
+ erro_msg("Invalid key state - ");
+ error = 1;
+ break;
+ }
+ break;
+
+ // Invalid TriggerGuide type
+ default:
+ erro_msg("Invalid type - ");
+ error = 1;
+ break;
+ }
+
+ // Check if ScanCode is out of range
+ if ( trigger->scanCode > MaxScanCode )
+ {
+ warn_msg("ScanCode is out of range/not defined - ");
+ error = 1;
+ }
+
+ // Display TriggerGuide
+ if ( error )
+ {
+ printHex( trigger->type );
+ print(" ");
+ printHex( trigger->state );
+ print(" ");
+ printHex( trigger->scanCode );
+ print( NL );
+ return;
+ }
+
+ // Add trigger to the Interconnect Cache
+ // During each processing loop, a scancode may be re-added depending on it's state
+ for ( uint8_t c = 0; c < macroInterconnectCacheSize; c++ )
+ {
+ // Check if the same ScanCode
+ if ( macroInterconnectCache[ c ].scanCode == trigger->scanCode )
+ {
+ // Update the state
+ macroInterconnectCache[ c ].state = trigger->state;
+ return;
+ }
+ }
+
+ // If not in the list, add it
+ macroInterconnectCache[ macroInterconnectCacheSize++ ] = *trigger;
}
+#endif
// Update the scancode key state
// * 0x04 - Unpressed (this is currently ignored)
inline void Macro_keyState( uint8_t scanCode, uint8_t state )
{
+#if defined(ConnectEnabled_define)
+ // Only compile in if a Connect node module is available
+ if ( !Connect_master )
+ {
+ // ScanCodes are only added if there was a state change (on/off)
+ switch ( state )
+ {
+ case 0x00: // Off
+ case 0x02: // Held
+ return;
+ }
+ }
+#endif
+
// Only add to macro trigger list if one of three states
switch ( state )
{
case 0x01: // Pressed
case 0x02: // Held
case 0x03: // Released
+ // Check if ScanCode is out of range
+ if ( scanCode > MaxScanCode )
+ {
+ warn_msg("ScanCode is out of range/not defined: ");
+ printHex( scanCode );
+ print( NL );
+ return;
+ }
+
macroTriggerListBuffer[ macroTriggerListBufferSize ].scanCode = scanCode;
macroTriggerListBuffer[ macroTriggerListBufferSize ].state = state;
macroTriggerListBuffer[ macroTriggerListBufferSize ].type = 0x00; // Normal key
inline void Macro_analogState( uint8_t scanCode, uint8_t state )
{
// Only add to macro trigger list if non-off
+ // TODO Handle change for interconnect
if ( state != 0x00 )
{
+ // Check if ScanCode is out of range
+ if ( scanCode > MaxScanCode )
+ {
+ warn_msg("ScanCode is out of range/not defined: ");
+ printHex( scanCode );
+ print( NL );
+ return;
+ }
+
macroTriggerListBuffer[ macroTriggerListBufferSize ].scanCode = scanCode;
macroTriggerListBuffer[ macroTriggerListBufferSize ].state = state;
macroTriggerListBuffer[ macroTriggerListBufferSize ].type = 0x02; // Analog key
inline void Macro_ledState( uint8_t ledCode, uint8_t state )
{
// Only add to macro trigger list if non-off
+ // TODO Handle change for interconnect
if ( state != 0x00 )
{
+ // Check if LedCode is out of range
+ // TODO
+
macroTriggerListBuffer[ macroTriggerListBufferSize ].scanCode = ledCode;
macroTriggerListBuffer[ macroTriggerListBufferSize ].state = state;
macroTriggerListBuffer[ macroTriggerListBufferSize ].type = 0x01; // LED key
// Lookup Trigger List
nat_ptr_t *triggerList = Macro_layerLookup( ¯oTriggerListBuffer[ key ], latch_expire );
+ // If there was an error during lookup, skip
+ if ( triggerList == 0 )
+ continue;
+
// Number of Triggers in list
nat_ptr_t triggerListSize = triggerList[0];
{
if ( macroTriggerListBufferSize > 0 )
{
- dbug_msg("Yuh");
- printHex( macroTriggerListBufferSize );
- print( NL );
- //Connect_send_ScanCode( Connect_id, macroTriggerListBuffer, macroTriggerListBufferSize );
+ Connect_send_ScanCode( Connect_id, macroTriggerListBuffer, macroTriggerListBufferSize );
macroTriggerListBufferSize = 0;
}
return;
if ( USBKeys_Sent != 0 )
return;
+#if defined(ConnectEnabled_define)
+ // Check if there are any ScanCodes in the interconnect cache to process
+ if ( Connect_master && macroInterconnectCacheSize > 0 )
+ {
+ // Iterate over all the cache ScanCodes
+ uint8_t currentInterconnectCacheSize = macroInterconnectCacheSize;
+ macroInterconnectCacheSize = 0;
+ for ( uint8_t c = 0; c < currentInterconnectCacheSize; c++ )
+ {
+ // Add to the trigger list
+ macroTriggerListBuffer[ macroTriggerListBufferSize++ ] = macroInterconnectCache[ c ];
+
+ // TODO Handle other TriggerGuide types (e.g. analog)
+ switch ( macroInterconnectCache[ c ].type )
+ {
+ // Normal (Press/Hold/Release)
+ case 0x00:
+ // Decide what to do based on the current state
+ switch ( macroInterconnectCache[ c ].state )
+ {
+ // Re-add to interconnect cache in hold state
+ case 0x01: // Press
+ //case 0x02: // Hold // XXX Why does this not work? -HaaTa
+ macroInterconnectCache[ c ].state = 0x02;
+ macroInterconnectCache[ macroInterconnectCacheSize++ ] = macroInterconnectCache[ c ];
+ break;
+ case 0x03: // Remove
+ break;
+ // Otherwise, do not re-add
+ }
+ }
+ }
+ }
+#endif
+
// If the pause flag is set, only process if the step counter is non-zero
if ( macroPauseMode )
{
projects / kiibohd-controller.git / blobdiff