/**
* Unfortunately we can't DMA directly to FlexRAM, so we'll have to stage here.
*/
-static char staging[ FLASH_SECTOR_SIZE ];
+static char staging[ USB_DFU_TRANSFER_SIZE ];
uint8_t* end = (uint8_t*)buf + (sector + 1) * USB_DFU_TRANSFER_SIZE;
uint8_t* pos = start;
+ // Verify if sector erased
+ FTFL.fccob.read_1s_section.fcmd = FTFL_FCMD_READ_1s_SECTION;
+ FTFL.fccob.read_1s_section.addr = (uintptr_t)start;
+ FTFL.fccob.read_1s_section.margin = FTFL_MARGIN_NORMAL;
+ FTFL.fccob.read_1s_section.num_words = 250; // 2000 kB / 64 bits
+ int retval = ftfl_submit_cmd();
+
print( NL );
print("Block ");
printHex( sector );
printHex( (size_t)start );
print(" -> ");
printHex( (size_t)end );
+ print(" Erased: ");
+ printHex( retval );
print( NL );
// Display sector
{
// Each Line
printHex_op( (size_t)pos, 4 );
- print(" ");
+ print(": ");
// Each 2 byte chunk
for ( size_t chunk = 0; chunk < chunks; chunk++ )
*buf = (void*)&_app_rom + (USB_DFU_TRANSFER_SIZE / 4) * off;
// Calculate length of transfer
+ /*
*len = *buf > (void*)(&_app_rom_end) - USB_DFU_TRANSFER_SIZE
? 0 : USB_DFU_TRANSFER_SIZE;
+ */
// Check for error
+ /*
if ( *buf > (void*)&_app_rom_end )
return (DFU_STATUS_errADDRESS);
+ */
return (DFU_STATUS_OK);
}
uart_serial_setup();
printNL( NL "Bootloader DFU-Mode" );
- // TODO REMOVEME
- for ( uint8_t sector = 0; sector < 3; sector++ )
- sector_print( &_app_rom, sector, 16 );
- print( NL );
-
// XXX REMOVEME
/*
GPIOB_PDDR |= (1<<16);
GPIOC_PCOR |= (1<<4);
*/
// Backlight
+ /*
GPIOC_PDDR |= (1<<1);
PORTC_PCR1 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
GPIOC_PCOR |= (1<<1);
GPIOC_PDDR |= (1<<3);
PORTC_PCR3 = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
GPIOC_PCOR |= (1<<3);
+ */
+
+ /*
+ // Read Firmware 1 Status
+ FTFL.fccob.read_1s_block.fcmd = FTFL_FCMD_READ_1s_BLOCK;
+ FTFL.fccob.read_1s_block.addr = (uintptr_t)&_app_rom;
+ FTFL.fccob.read_1s_block.margin = FTFL_MARGIN_NORMAL;
+
+ int retval = ftfl_submit_cmd();
+ print("Firmware Erase Status: ");
+ printHex( retval );
+ print( NL );
+
+
+ // Read Bootloader 1 Status
+ FTFL.fccob.read_1s_block.fcmd = FTFL_FCMD_READ_1s_BLOCK;
+ FTFL.fccob.read_1s_block.addr = (uintptr_t)&_bootloader;
+ FTFL.fccob.read_1s_block.margin = FTFL_MARGIN_NORMAL;
+
+ retval = ftfl_submit_cmd();
+ print("Bootloader Erase Status: ");
+ printHex( retval );
+ print( NL );
+ */
+
+ /*
+ // Program First Longword of firmware
+ FTFL.fccob.program_longword.fcmd = FTFL_FCMD_PROGRAM_LONGWORD;
+ FTFL.fccob.program_longword.addr = (uintptr_t)&_app_rom;
+ FTFL.fccob.program_longword.data_be[0] = 0x1;
+ FTFL.fccob.program_longword.data_be[1] = 0x2;
+ FTFL.fccob.program_longword.data_be[2] = 0x4;
+ FTFL.fccob.program_longword.data_be[3] = 0x8;
+ int retval = ftfl_submit_cmd();
+ print("Write Longword Status: ");
+ printHex( retval );
+ print( NL );
+ */
+
+ /*
+ // Erase Sector
+ FTFL.fccob.erase.fcmd = FTFL_FCMD_ERASE_SECTOR;
+ FTFL.fccob.erase.addr = (uintptr_t)&_app_rom;
+ int retval = ftfl_submit_cmd();
+ print("Erase Status: ");
+ printHex( retval );
+ print( NL );
+
+ // Prepare FlexRAM
+ FTFL.fccob.set_flexram.fcmd = FTFL_FCMD_SET_FLEXRAM;
+ FTFL.fccob.set_flexram.flexram_function = FTFL_FLEXRAM_RAM;
+ retval = ftfl_submit_cmd();
+ print("Set FlexRAM Status: ");
+ printHex( retval );
+ print( NL );
+
+ // Write to FlexRAM
+ memset( FlexRAM, 0xB4, 1000 );
+ memset( &FlexRAM[1000], 0xE3, 1000 );
+
+ // Program Sector
+ FTFL.fccob.program_section.fcmd = FTFL_FCMD_PROGRAM_SECTION;
+ FTFL.fccob.program_section.addr = (uintptr_t)&_app_rom;
+ FTFL.fccob.program_section.num_words = 128;
+ //FTFL.fccob.program_section.num_words = 250; // 2000 kb / 64 bits
+ retval = ftfl_submit_cmd();
+ print("Program Sector1 Status: ");
+ printHex( retval );
+ print( NL );
+
+ FTFL.fccob.program_section.fcmd = FTFL_FCMD_PROGRAM_SECTION;
+ FTFL.fccob.program_section.addr = (uintptr_t)&_app_rom + 0x400;
+ FTFL.fccob.program_section.num_words = 128;
+ //FTFL.fccob.program_section.num_words = 250; // 2000 kb / 64 bits
+ retval = ftfl_submit_cmd();
+ print("Program Sector2 Status: ");
+ printHex( retval );
+ print( NL );
+
+ for ( uint8_t sector = 0; sector < 1; sector++ )
+ //sector_print( &_bootloader, sector, 16 );
+ sector_print( &_app_rom, sector, 16 );
+ print( NL );
+ */
flash_prepare_flashing();