+++ /dev/null
-##
-## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
-## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
-##
-
-# Defaults for monit initscript
-# sourced by /etc/init.d/monit
-# installed at /etc/default/monit by maintainer scripts
-# Fredrik Steen <stone@debian.org>
-
-# You must set this variable to for monit to start
-startup=1
-
-# To change the intervals which monit should run uncomment
-# and change this variable.
-CHECK_INTERVALS=300
+++ /dev/null
-##
-## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
-## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
-##
-###############################################################################
-## Monit control file
-###############################################################################
-##
-## Comments begin with a '#' and extend through the end of the line. Keywords
-## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
-##
-## Below you will find examples of some frequently used statements. For
-## information about the control file, a complete list of statements and
-## options please have a look in the monit manual.
-##
-##
-###############################################################################
-## Global section
-###############################################################################
-##
-## Start monit in the background (run as a daemon) and check services at
-## 2-minute intervals.
-#
-# set daemon 120
-#
-#
-## Set syslog logging with the 'daemon' facility. If the FACILITY option is
-## omitted, monit will use 'user' facility by default. If you want to log to
-## a stand alone log file instead, specify the path to a log file
-#
-# set logfile syslog facility log_daemon
-#
-#
-## Set the list of mail servers for alert delivery. Multiple servers may be
-## specified using comma separator. By default monit uses port 25 - this
-## is possible to override with the PORT option.
-#
-# set mailserver mail.bar.baz, # primary mailserver
-# backup.bar.baz port 10025, # backup mailserver on port 10025
-# localhost # fallback relay
-#
-#
-## By default monit will drop alert events if no mail servers are available.
-## If you want to keep the alerts for a later delivery retry, you can use the
-## EVENTQUEUE statement. The base directory where undelivered alerts will be
-## stored is specified by the BASEDIR option. You can limit the maximal queue
-## size using the SLOTS option (if omitted, the queue is limited by space
-## available in the back end filesystem).
-#
-# set eventqueue
-# basedir /var/monit # set the base directory where events will be stored
-# slots 100 # optionaly limit the queue size
-#
-#
-## Monit by default uses the following alert mail format:
-##
-## --8<--
-## From: monit@$HOST # sender
-## Subject: monit alert -- $EVENT $SERVICE # subject
-##
-## $EVENT Service $SERVICE #
-## #
-## Date: $DATE #
-## Action: $ACTION #
-## Host: $HOST # body
-## Description: $DESCRIPTION #
-## #
-## Your faithful employee, #
-## monit #
-## --8<--
-##
-## You can override this message format or parts of it, such as subject
-## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
-## are expanded at runtime. For example, to override the sender:
-#
-# set mail-format { from: monit@foo.bar }
-#
-#
-## You can set alert recipients here whom will receive alerts if/when a
-## service defined in this file has errors. Alerts may be restricted on
-## events by using a filter as in the second example below.
-#
-# set alert sysadm@foo.bar # receive all alerts
-# set alert manager@foo.bar only on { timeout } # receive just service-
-# # timeout alert
-#
-#
-## Monit has an embedded web server which can be used to view status of
-## services monitored, the current configuration, actual services parameters
-## and manage services from a web interface.
-#
-# set httpd port 2812 and
-# use address localhost # only accept connection from localhost
-# allow localhost # allow localhost to connect to the server and
-# allow admin:monit # require user 'admin' with password 'monit'
-#
-#
-###############################################################################
-## Services
-###############################################################################
-##
-## Check general system resources such as load average, cpu and memory
-## usage. Each test specifies a resource, conditions and the action to be
-## performed should a test fail.
-#
-# check system myhost.mydomain.tld
-# if loadavg (1min) > 4 then alert
-# if loadavg (5min) > 2 then alert
-# if memory usage > 75% then alert
-# if cpu usage (user) > 70% then alert
-# if cpu usage (system) > 30% then alert
-# if cpu usage (wait) > 20% then alert
-#
-#
-## Check a file for existence, checksum, permissions, uid and gid. In addition
-## to alert recipients in the global section, customized alert will be sent to
-## additional recipients by specifying a local alert handler. The service may
-## be grouped using the GROUP option.
-#
-# check file apache_bin with path /usr/local/apache/bin/httpd
-# if failed checksum and
-# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
-# if failed permission 755 then unmonitor
-# if failed uid root then unmonitor
-# if failed gid root then unmonitor
-# alert security@foo.bar on {
-# checksum, permission, uid, gid, unmonitor
-# } with the mail-format { subject: Alarm! }
-# group server
-#
-#
-## Check that a process is running, in this case Apache, and that it respond
-## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory,
-## and number of children. If the process is not running, monit will restart
-## it by default. In case the service was restarted very often and the
-## problem remains, it is possible to disable monitoring using the TIMEOUT
-## statement. This service depends on another service (apache_bin) which
-## is defined above.
-#
-# check process apache with pidfile /usr/local/apache/logs/httpd.pid
-# start program = "/etc/init.d/httpd start"
-# stop program = "/etc/init.d/httpd stop"
-# if cpu > 60% for 2 cycles then alert
-# if cpu > 80% for 5 cycles then restart
-# if totalmem > 200.0 MB for 5 cycles then restart
-# if children > 250 then restart
-# if loadavg(5min) greater than 10 for 8 cycles then stop
-# if failed host www.tildeslash.com port 80 protocol http
-# and request "/monit/doc/next.php"
-# then restart
-# if failed port 443 type tcpssl protocol http
-# with timeout 15 seconds
-# then restart
-# if 3 restarts within 5 cycles then timeout
-# depends on apache_bin
-# group server
-#
-#
-## Check device permissions, uid, gid, space and inode usage. Other services,
-## such as databases, may depend on this resource and an automatically graceful
-## stop may be cascaded to them before the filesystem will become full and data
-## lost.
-#
-# check device datafs with path /dev/sdb1
-# start program = "/bin/mount /data"
-# stop program = "/bin/umount /data"
-# if failed permission 660 then unmonitor
-# if failed uid root then unmonitor
-# if failed gid disk then unmonitor
-# if space usage > 80% for 5 times within 15 cycles then alert
-# if space usage > 99% then stop
-# if inode usage > 30000 then alert
-# if inode usage > 99% then stop
-# group server
-#
-#
-## Check a file's timestamp. In this example, we test if a file is older
-## than 15 minutes and assume something is wrong if its not updated. Also,
-## if the file size exceed a given limit, execute a script
-#
-# check file database with path /data/mydatabase.db
-# if failed permission 700 then alert
-# if failed uid data then alert
-# if failed gid data then alert
-# if timestamp > 15 minutes then alert
-# if size > 100 MB then exec "/my/cleanup/script"
-#
-#
-## Check directory permission, uid and gid. An event is triggered if the
-## directory does not belong to the user with uid 0 and gid 0. In addition,
-## the permissions have to match the octal description of 755 (see chmod(1)).
-#
-# check directory bin with path /bin
-# if failed permission 755 then unmonitor
-# if failed uid 0 then unmonitor
-# if failed gid 0 then unmonitor
-#
-#
-## Check a remote host network services availability using a ping test and
-## check response content from a web server. Up to three pings are sent and
-## connection to a port and a application level network check is performed.
-#
-# check host myserver with address 192.168.1.1
-# if failed icmp type echo count 3 with timeout 3 seconds then alert
-# if failed port 3306 protocol mysql with timeout 15 seconds then alert
-# if failed url
-# http://user:password@www.foo.bar:8080/?querystring
-# and content == 'action="j_security_check"'
-# then alert
-#
-#
-###############################################################################
-## Includes
-###############################################################################
-##
-## It is possible to include additional configuration parts from other files or
-## directories.
-#
-include /etc/monit/monit.d/*
;
"/etc/monit/monitrc":
- source => "puppet:///monit/monitrc",
+ content => template("monit/monitrc.erb"),
require => Package["monit"],
notify => Exec["monit restart"],
mode => 400
;
"/etc/default/monit":
- source => "puppet:///monit/default",
+ content => template("monit/default.erb"),
require => Package["monit"],
notify => Exec["monit restart"]
;
--- /dev/null
+##
+## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
+## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
+##
+
+# Defaults for monit initscript
+# sourced by /etc/init.d/monit
+# installed at /etc/default/monit by maintainer scripts
+# Fredrik Steen <stone@debian.org>
+
+# You must set this variable to for monit to start
+startup=1
+<% if nodeinfo.has_key?('squeeze') and not nodeinfo['squeeze'].empty? %>
+<% else %>
+
+# To change the intervals which monit should run uncomment
+# and change this variable.
+CHECK_INTERVALS=300
+<% end %>
--- /dev/null
+##
+## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
+## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
+##
+###############################################################################
+## Monit control file
+###############################################################################
+##
+## Comments begin with a '#' and extend through the end of the line. Keywords
+## are case insensitive. All path's MUST BE FULLY QUALIFIED, starting with '/'.
+##
+## Below you will find examples of some frequently used statements. For
+## information about the control file, a complete list of statements and
+## options please have a look in the monit manual.
+##
+##
+###############################################################################
+## Global section
+###############################################################################
+##
+## Start monit in the background (run as a daemon) and check services at
+## 2-minute intervals.
+#
+<% if nodeinfo.has_key?('squeeze') and not nodeinfo['squeeze'].empty? %>
+set daemon 300
+<% else %>
+<% end %>
+#
+#
+## Set syslog logging with the 'daemon' facility. If the FACILITY option is
+## omitted, monit will use 'user' facility by default. If you want to log to
+## a stand alone log file instead, specify the path to a log file
+#
+# set logfile syslog facility log_daemon
+#
+#
+## Set the list of mail servers for alert delivery. Multiple servers may be
+## specified using comma separator. By default monit uses port 25 - this
+## is possible to override with the PORT option.
+#
+# set mailserver mail.bar.baz, # primary mailserver
+# backup.bar.baz port 10025, # backup mailserver on port 10025
+# localhost # fallback relay
+#
+#
+## By default monit will drop alert events if no mail servers are available.
+## If you want to keep the alerts for a later delivery retry, you can use the
+## EVENTQUEUE statement. The base directory where undelivered alerts will be
+## stored is specified by the BASEDIR option. You can limit the maximal queue
+## size using the SLOTS option (if omitted, the queue is limited by space
+## available in the back end filesystem).
+#
+# set eventqueue
+# basedir /var/monit # set the base directory where events will be stored
+# slots 100 # optionaly limit the queue size
+#
+#
+## Monit by default uses the following alert mail format:
+##
+## --8<--
+## From: monit@$HOST # sender
+## Subject: monit alert -- $EVENT $SERVICE # subject
+##
+## $EVENT Service $SERVICE #
+## #
+## Date: $DATE #
+## Action: $ACTION #
+## Host: $HOST # body
+## Description: $DESCRIPTION #
+## #
+## Your faithful employee, #
+## monit #
+## --8<--
+##
+## You can override this message format or parts of it, such as subject
+## or sender using the MAIL-FORMAT statement. Macros such as $DATE, etc.
+## are expanded at runtime. For example, to override the sender:
+#
+# set mail-format { from: monit@foo.bar }
+#
+#
+## You can set alert recipients here whom will receive alerts if/when a
+## service defined in this file has errors. Alerts may be restricted on
+## events by using a filter as in the second example below.
+#
+# set alert sysadm@foo.bar # receive all alerts
+# set alert manager@foo.bar only on { timeout } # receive just service-
+# # timeout alert
+#
+#
+## Monit has an embedded web server which can be used to view status of
+## services monitored, the current configuration, actual services parameters
+## and manage services from a web interface.
+#
+# set httpd port 2812 and
+# use address localhost # only accept connection from localhost
+# allow localhost # allow localhost to connect to the server and
+# allow admin:monit # require user 'admin' with password 'monit'
+#
+#
+###############################################################################
+## Services
+###############################################################################
+##
+## Check general system resources such as load average, cpu and memory
+## usage. Each test specifies a resource, conditions and the action to be
+## performed should a test fail.
+#
+# check system myhost.mydomain.tld
+# if loadavg (1min) > 4 then alert
+# if loadavg (5min) > 2 then alert
+# if memory usage > 75% then alert
+# if cpu usage (user) > 70% then alert
+# if cpu usage (system) > 30% then alert
+# if cpu usage (wait) > 20% then alert
+#
+#
+## Check a file for existence, checksum, permissions, uid and gid. In addition
+## to alert recipients in the global section, customized alert will be sent to
+## additional recipients by specifying a local alert handler. The service may
+## be grouped using the GROUP option.
+#
+# check file apache_bin with path /usr/local/apache/bin/httpd
+# if failed checksum and
+# expect the sum 8f7f419955cefa0b33a2ba316cba3659 then unmonitor
+# if failed permission 755 then unmonitor
+# if failed uid root then unmonitor
+# if failed gid root then unmonitor
+# alert security@foo.bar on {
+# checksum, permission, uid, gid, unmonitor
+# } with the mail-format { subject: Alarm! }
+# group server
+#
+#
+## Check that a process is running, in this case Apache, and that it respond
+## to HTTP and HTTPS requests. Check its resource usage such as cpu and memory,
+## and number of children. If the process is not running, monit will restart
+## it by default. In case the service was restarted very often and the
+## problem remains, it is possible to disable monitoring using the TIMEOUT
+## statement. This service depends on another service (apache_bin) which
+## is defined above.
+#
+# check process apache with pidfile /usr/local/apache/logs/httpd.pid
+# start program = "/etc/init.d/httpd start"
+# stop program = "/etc/init.d/httpd stop"
+# if cpu > 60% for 2 cycles then alert
+# if cpu > 80% for 5 cycles then restart
+# if totalmem > 200.0 MB for 5 cycles then restart
+# if children > 250 then restart
+# if loadavg(5min) greater than 10 for 8 cycles then stop
+# if failed host www.tildeslash.com port 80 protocol http
+# and request "/monit/doc/next.php"
+# then restart
+# if failed port 443 type tcpssl protocol http
+# with timeout 15 seconds
+# then restart
+# if 3 restarts within 5 cycles then timeout
+# depends on apache_bin
+# group server
+#
+#
+## Check device permissions, uid, gid, space and inode usage. Other services,
+## such as databases, may depend on this resource and an automatically graceful
+## stop may be cascaded to them before the filesystem will become full and data
+## lost.
+#
+# check device datafs with path /dev/sdb1
+# start program = "/bin/mount /data"
+# stop program = "/bin/umount /data"
+# if failed permission 660 then unmonitor
+# if failed uid root then unmonitor
+# if failed gid disk then unmonitor
+# if space usage > 80% for 5 times within 15 cycles then alert
+# if space usage > 99% then stop
+# if inode usage > 30000 then alert
+# if inode usage > 99% then stop
+# group server
+#
+#
+## Check a file's timestamp. In this example, we test if a file is older
+## than 15 minutes and assume something is wrong if its not updated. Also,
+## if the file size exceed a given limit, execute a script
+#
+# check file database with path /data/mydatabase.db
+# if failed permission 700 then alert
+# if failed uid data then alert
+# if failed gid data then alert
+# if timestamp > 15 minutes then alert
+# if size > 100 MB then exec "/my/cleanup/script"
+#
+#
+## Check directory permission, uid and gid. An event is triggered if the
+## directory does not belong to the user with uid 0 and gid 0. In addition,
+## the permissions have to match the octal description of 755 (see chmod(1)).
+#
+# check directory bin with path /bin
+# if failed permission 755 then unmonitor
+# if failed uid 0 then unmonitor
+# if failed gid 0 then unmonitor
+#
+#
+## Check a remote host network services availability using a ping test and
+## check response content from a web server. Up to three pings are sent and
+## connection to a port and a application level network check is performed.
+#
+# check host myserver with address 192.168.1.1
+# if failed icmp type echo count 3 with timeout 3 seconds then alert
+# if failed port 3306 protocol mysql with timeout 15 seconds then alert
+# if failed url
+# http://user:password@www.foo.bar:8080/?querystring
+# and content == 'action="j_security_check"'
+# then alert
+#
+#
+###############################################################################
+## Includes
+###############################################################################
+##
+## It is possible to include additional configuration parts from other files or
+## directories.
+#
+include /etc/monit/monit.d/*
projects / dsa-puppet.git / commitdiff