+++ /dev/null
-##
-## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
-## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
-##
-#############################################################################
-# Sample NRPE Config File
-# Written by: Ethan Galstad (nagios@nagios.org)
-#
-# Last Modified: 11-23-2007
-#
-# NOTES:
-# This is a sample configuration file for the NRPE daemon. It needs to be
-# located on the remote host that is running the NRPE daemon, not the host
-# from which the check_nrpe client is being executed.
-#############################################################################
-
-
-# LOG FACILITY
-# The syslog facility that should be used for logging purposes.
-
-log_facility=daemon
-
-
-
-# PID FILE
-# The name of the file in which the NRPE daemon should write it's process ID
-# number. The file is only written if the NRPE daemon is started by the root
-# user and is running in standalone mode.
-
-pid_file=/var/run/nrpe.pid
-
-
-
-# PORT NUMBER
-# Port number we should wait for connections on.
-# NOTE: This must be a non-priviledged port (i.e. > 1024).
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-server_port=5666
-
-
-
-# SERVER ADDRESS
-# Address that nrpe should bind to in case there are more than one interface
-# and you do not want nrpe to bind on all interfaces.
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-#server_address=127.0.0.1
-
-
-
-# NRPE USER
-# This determines the effective user that the NRPE daemon should run as.
-# You can either supply a username or a UID.
-#
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-nrpe_user=nagios
-
-
-
-# NRPE GROUP
-# This determines the effective group that the NRPE daemon should run as.
-# You can either supply a group name or a GID.
-#
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-nrpe_group=nagios
-
-
-
-# ALLOWED HOST ADDRESSES
-# This is an optional comma-delimited list of IP address or hostnames
-# that are allowed to talk to the NRPE daemon.
-#
-# Note: The daemon only does rudimentary checking of the client's IP
-# address. I would highly recommend adding entries in your /etc/hosts.allow
-# file to allow only the specified host to connect to the port
-# you are running this daemon on.
-#
-# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
-
-allowed_hosts=127.0.0.1
-
-
-
-# COMMAND ARGUMENT PROCESSING
-# This option determines whether or not the NRPE daemon will allow clients
-# to specify arguments to commands that are executed. This option only works
-# if the daemon was configured with the --enable-command-args configure script
-# option.
-#
-# *** ENABLING THIS OPTION IS A SECURITY RISK! ***
-# Read the SECURITY file for information on some of the security implications
-# of enabling this variable.
-#
-# Values: 0=do not allow arguments, 1=allow command arguments
-
-dont_blame_nrpe=0
-
-
-
-# COMMAND PREFIX
-# This option allows you to prefix all commands with a user-defined string.
-# A space is automatically added between the specified prefix string and the
-# command line from the command definition.
-#
-# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
-# Usage scenario:
-# Execute restricted commmands using sudo. For this to work, you need to add
-# the nagios user to your /etc/sudoers. An example entry for alllowing
-# execution of the plugins from might be:
-#
-# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
-#
-# This lets the nagios user run all commands in that directory (and only them)
-# without asking for a password. If you do this, make sure you don't give
-# random users write access to that directory or its contents!
-
-# command_prefix=/usr/bin/sudo
-
-
-
-# DEBUGGING OPTION
-# This option determines whether or not debugging messages are logged to the
-# syslog facility.
-# Values: 0=debugging off, 1=debugging on
-
-debug=0
-
-
-
-# COMMAND TIMEOUT
-# This specifies the maximum number of seconds that the NRPE daemon will
-# allow plugins to finish executing before killing them off.
-
-command_timeout=60
-
-
-
-# CONNECTION TIMEOUT
-# This specifies the maximum number of seconds that the NRPE daemon will
-# wait for a connection to be established before exiting. This is sometimes
-# seen where a network problem stops the SSL being established even though
-# all network sessions are connected. This causes the nrpe daemons to
-# accumulate, eating system resources. Do not set this too low.
-
-connection_timeout=300
-
-
-
-# WEEK RANDOM SEED OPTION
-# This directive allows you to use SSL even if your system does not have
-# a /dev/random or /dev/urandom (on purpose or because the necessary patches
-# were not applied). The random number generator will be seeded from a file
-# which is either a file pointed to by the environment valiable $RANDFILE
-# or $HOME/.rnd. If neither exists, the pseudo random number generator will
-# be initialized and a warning will be issued.
-# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
-
-#allow_weak_random_seed=1
-
-
-
-# INCLUDE CONFIG FILE
-# This directive allows you to include definitions from an external config file.
-
-#include=<somefile.cfg>
-
-
-
-# INCLUDE CONFIG DIRECTORY
-# This directive allows you to include definitions from config files (with a
-# .cfg extension) in one or more directories (with recursion).
-
-#include_dir=<somedirectory>
-#include_dir=<someotherdirectory>
-
-
-
-# COMMAND DEFINITIONS
-# Command definitions that this daemon will run. Definitions
-# are in the following format:
-#
-# command[<command_name>]=<command_line>
-#
-# When the daemon receives a request to return the results of <command_name>
-# it will execute the command specified by the <command_line> argument.
-#
-# Unlike Nagios, the command line cannot contain macros - it must be
-# typed exactly as it should be executed.
-#
-# Note: Any plugins that are used in the command lines must reside
-# on the machine that this daemon is running on! The examples below
-# assume that you have plugins installed in a /usr/local/nagios/libexec
-# directory. Also note that you will have to modify the definitions below
-# to match the argument format the plugins expect. Remember, these are
-# examples only!
-
-
-# The following examples use hardcoded command arguments...
-
-command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
-command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
-command[check_hda1]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
-command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
-command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200
-
-
-# The following examples allow user-supplied arguments and can
-# only be used if the NRPE daemon was compiled with support for
-# command arguments *AND* the dont_blame_nrpe directive in this
-# config file is set to '1'. This poses a potential security risk, so
-# make sure you read the SECURITY file before doing this.
-
-#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
-#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
-#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
-#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
-
-#
-# local configuration:
-# if you'd prefer, you can instead place directives here
-include=/etc/nagios/nrpe_local.cfg
-
-#
-# you can place your config snipplets into nrpe.d/
-include_dir=/etc/nagios/nrpe.d/
-
-
ensure => absent,
notify => Exec["nagios-nrpe-server restart"];
"/etc/nagios/nrpe.cfg":
- source => [ "puppet:///modules/nagios/per-host/$fqdn/nrpe.cfg",
- "puppet:///modules/nagios/common/nrpe.cfg" ],
+ content => template("nagios/nrpe.cfg.erb"),
require => Package["nagios-nrpe-server"],
notify => Exec["nagios-nrpe-server restart"];
"/etc/nagios/nrpe.d":
require => Package["nagios-nrpe-server"],
ensure => directory;
"/etc/nagios/nrpe.d/debianorg.cfg":
- content => template("nagios/inc-debian.org.erb"),
+ content => template("nagios/inc-debian.org.erb"),
require => Package["nagios-nrpe-server"],
notify => Exec["nagios-nrpe-server restart"];
"/etc/nagios/nrpe.d/nrpe_dsa.cfg":
--- /dev/null
+##
+## THIS FILE IS UNDER PUPPET CONTROL. DON'T EDIT IT HERE.
+## USE: git clone git+ssh://$USER@puppet.debian.org/srv/puppet.debian.org/git/dsa-puppet.git
+##
+#############################################################################
+# Sample NRPE Config File
+# Written by: Ethan Galstad (nagios@nagios.org)
+#
+# Last Modified: 11-23-2007
+#
+# NOTES:
+# This is a sample configuration file for the NRPE daemon. It needs to be
+# located on the remote host that is running the NRPE daemon, not the host
+# from which the check_nrpe client is being executed.
+#############################################################################
+
+
+# LOG FACILITY
+# The syslog facility that should be used for logging purposes.
+
+log_facility=daemon
+
+
+
+# PID FILE
+# The name of the file in which the NRPE daemon should write it's process ID
+# number. The file is only written if the NRPE daemon is started by the root
+# user and is running in standalone mode.
+
+<% if nodeinfo.has_key?('squeeze') and nodeinfo['squeeze'] %>
+pid_file=/var/run/nagios/nrpe.pid
+<% else %>
+pid_file=/var/run/nrpe.pid
+<% end %>
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# NOTE: This must be a non-priviledged port (i.e. > 1024).
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+server_port=5666
+
+
+
+# SERVER ADDRESS
+# Address that nrpe should bind to in case there are more than one interface
+# and you do not want nrpe to bind on all interfaces.
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+#server_address=127.0.0.1
+
+
+
+# NRPE USER
+# This determines the effective user that the NRPE daemon should run as.
+# You can either supply a username or a UID.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_user=nagios
+
+
+
+# NRPE GROUP
+# This determines the effective group that the NRPE daemon should run as.
+# You can either supply a group name or a GID.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_group=nagios
+
+
+
+# ALLOWED HOST ADDRESSES
+# This is an optional comma-delimited list of IP address or hostnames
+# that are allowed to talk to the NRPE daemon.
+#
+# Note: The daemon only does rudimentary checking of the client's IP
+# address. I would highly recommend adding entries in your /etc/hosts.allow
+# file to allow only the specified host to connect to the port
+# you are running this daemon on.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+allowed_hosts=127.0.0.1
+
+
+
+# COMMAND ARGUMENT PROCESSING
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments to commands that are executed. This option only works
+# if the daemon was configured with the --enable-command-args configure script
+# option.
+#
+# *** ENABLING THIS OPTION IS A SECURITY RISK! ***
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow arguments, 1=allow command arguments
+
+dont_blame_nrpe=0
+
+
+
+# COMMAND PREFIX
+# This option allows you to prefix all commands with a user-defined string.
+# A space is automatically added between the specified prefix string and the
+# command line from the command definition.
+#
+# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
+# Usage scenario:
+# Execute restricted commmands using sudo. For this to work, you need to add
+# the nagios user to your /etc/sudoers. An example entry for alllowing
+# execution of the plugins from might be:
+#
+# nagios ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
+#
+# This lets the nagios user run all commands in that directory (and only them)
+# without asking for a password. If you do this, make sure you don't give
+# random users write access to that directory or its contents!
+
+# command_prefix=/usr/bin/sudo
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging messages are logged to the
+# syslog facility.
+# Values: 0=debugging off, 1=debugging on
+
+debug=0
+
+
+
+# COMMAND TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# allow plugins to finish executing before killing them off.
+
+command_timeout=60
+
+
+
+# CONNECTION TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# wait for a connection to be established before exiting. This is sometimes
+# seen where a network problem stops the SSL being established even though
+# all network sessions are connected. This causes the nrpe daemons to
+# accumulate, eating system resources. Do not set this too low.
+
+connection_timeout=300
+
+
+
+# WEEK RANDOM SEED OPTION
+# This directive allows you to use SSL even if your system does not have
+# a /dev/random or /dev/urandom (on purpose or because the necessary patches
+# were not applied). The random number generator will be seeded from a file
+# which is either a file pointed to by the environment valiable $RANDFILE
+# or $HOME/.rnd. If neither exists, the pseudo random number generator will
+# be initialized and a warning will be issued.
+# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
+
+#allow_weak_random_seed=1
+
+
+
+# INCLUDE CONFIG FILE
+# This directive allows you to include definitions from an external config file.
+
+#include=<somefile.cfg>
+
+
+
+# INCLUDE CONFIG DIRECTORY
+# This directive allows you to include definitions from config files (with a
+# .cfg extension) in one or more directories (with recursion).
+
+#include_dir=<somedirectory>
+#include_dir=<someotherdirectory>
+
+
+
+# COMMAND DEFINITIONS
+# Command definitions that this daemon will run. Definitions
+# are in the following format:
+#
+# command[<command_name>]=<command_line>
+#
+# When the daemon receives a request to return the results of <command_name>
+# it will execute the command specified by the <command_line> argument.
+#
+# Unlike Nagios, the command line cannot contain macros - it must be
+# typed exactly as it should be executed.
+#
+# Note: Any plugins that are used in the command lines must reside
+# on the machine that this daemon is running on! The examples below
+# assume that you have plugins installed in a /usr/local/nagios/libexec
+# directory. Also note that you will have to modify the definitions below
+# to match the argument format the plugins expect. Remember, these are
+# examples only!
+
+
+# The following examples use hardcoded command arguments...
+
+command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
+command[check_load]=/usr/lib/nagios/plugins/check_load -w 15,10,5 -c 30,25,20
+command[check_hda1]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
+command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
+command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200
+
+
+# The following examples allow user-supplied arguments and can
+# only be used if the NRPE daemon was compiled with support for
+# command arguments *AND* the dont_blame_nrpe directive in this
+# config file is set to '1'. This poses a potential security risk, so
+# make sure you read the SECURITY file before doing this.
+
+#command[check_users]=/usr/lib/nagios/plugins/check_users -w $ARG1$ -c $ARG2$
+#command[check_load]=/usr/lib/nagios/plugins/check_load -w $ARG1$ -c $ARG2$
+#command[check_disk]=/usr/lib/nagios/plugins/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+#command[check_procs]=/usr/lib/nagios/plugins/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+
+#
+# local configuration:
+# if you'd prefer, you can instead place directives here
+include=/etc/nagios/nrpe_local.cfg
+
+#
+# you can place your config snipplets into nrpe.d/
+include_dir=/etc/nagios/nrpe.d/
+
+
projects / dsa-puppet.git / commitdiff